Grills & Smokers (Page 5)
-
just assembled my new ironwood 650 and it won't power on at all, no lights, nothing
This is almost always an assembly error—the main power cable isn't fully seated or a safety interlock isn't engaged. Check the main power connection …
-
pellet hopper on my ironwood says it's empty on the app when it's clearly full
The pellet sensor (a small paddle wheel in the hopper) is stuck or its mechanism is bound by pellet dust or a stray pellet. Empty the hopper. Locate …
-
the fan on my ironwood runs non-stop, even hours after shutdown, is that normal?
No, it's not. The fan should shut off after the cool-down cycle (about 15-20 minutes). Continuous running indicates a controller software glitch or a…
-
how do i stop insane amounts of grease from pooling in the bottom of my ironwood 650?
The grease management system is overwhelmed or misaligned. The drip tray channel isn't directing grease to the bucket effectively. Check the slope. T…
-
my ironwood won't get above 300 degrees, just sits at like 250 even when set to 400
Insufficient airflow or a dirty temperature probe causing the controller to misread and underfeed pellets. Clean the RTD probe. Let the grill cool, u…
-
there's a loud clicking or grinding noise coming from the bottom of my ironwood during startup
That's the sound of the auger motor struggling, usually because pellets are jammed in the auger tube or hopper. Immediately turn the grill off and un…
-
traeger app says my ironwood is offline but it's right next to the router, won't connect
The grill's Wi-Fi module has likely lost its pairing or is struggling with a 2.4GHz network conflict. It only works on 2.4GHz networks. Re-pair from …
-
my ironwood 650 just shows 'err' on the screen and won't start, what's wrong?
The controller is detecting a fault in the startup sequence, most commonly a failed firepot ignition or a problem with the RTD temperature probe. Sta…