MW
Marcus Webb
Explains it once, explains it clearly.
Marcus taught high school shop class for years before writing full-time. He is the guy your family calls when something breaks, mostly because he is the only one who explains it without making you feel dumb for asking.
Answers from Marcus Webb
- the depth adjustment on my saw is really stiff and hard to turn, feels like it's gonna break
- battery seems fine but the saw has no power, bogs down immediately in a 2x4
- the safety guard on my bosch circular saw is sticking and retracting really slow, feels dangerous
- saw works but the led light is super dim or flickers, not helping at all in the shade
- i can't get a square cut with my bosch saw, the bevel adjustment feels off and won't lock at 90
- dust port on my bosch cordless saw keeps clogging and blowing sawdust everywhere, is there a trick to it?
- the blade on my gks18v-25cn wobbles a bit, makes a weird humming noise and the cuts aren't straight
- my bosch cordless saw just quit in the middle of a cut, won't turn back on, battery is charged
- after it mops, it goes to the dock but the mop pads don't lift up, so they're dragging on the carpet.
- the suction power seems really weak even on the max setting, doesn't pick up crumbs it used to.
- it won't connect to the app during setup, just spins forever on 'connecting to network'.
- the robot just randomly pauses for like 30 seconds during a clean, then starts again like nothing happened.
- my l20 ultra is leaving wet streaks on my hardwood floor instead of cleaning it.
- the auto-empty station is making a loud screeching noise when it sucks the dirt out, sounds awful.
- robot is stuck with error 8 on the screen, won't move from the dock.
- my dreame l20 ultra keeps saying 'please clean the mop pads' over and over even after i just washed them.
- the 'adaptive contrast' setting on my acer nitro monitor makes dark scenes in games look weird and blotchy, should i use it?
- is it safe to use a screen cleaner like windex on the acer nitro xv271u screen? the manual is super vague.
- my screen goes black for a second randomly while gaming on my acer nitro xv271u, then comes back. it's driving me nuts.
- the little joystick button on the back of my acer nitro monitor is super stiff and hard to press, am i doing it wrong?
- how do i actually get 165hz on my acer nitro xv271u? my windows settings only show 60hz as an option.
- the colors on my xv271u look really washed out and bland compared to my old monitor, how do i fix this?
- acer nitro xv271u makes a faint but annoying high-pitched buzzing or whining noise, is this normal?
- my new acer nitro xv271u shows 'no signal' when i turn it on with my pc, but the power light is on. what gives?
- how do i clean the screen on this toshiba without ruining it? it's got smudges from kids
- there's a vertical line or thin bar of different color stuck on my screen, won't go away
- my tv keeps disconnecting from the wifi every day or two, have to keep re-entering the password
- the remote for my regza tv is super laggy or doesn't work unless i'm pointing right at it
- i get no sound from my toshiba tv speakers when using an hdmi device like my cable box
- the screen on my 55c350ku is really dim even with the brightness and backlight settings maxed out
- my toshiba smart tv apps keep freezing or crashing, especially netflix and youtube
- my new toshiba regza tv won't turn on at all, just a black screen and the red standby light is on
- i get a weird popping or crackling sound sometimes from my soundbar, especially when first turning it on.
- the dialogue from my tv shows is really hard to hear but explosions are too loud on my tcl soundbar.
- the remote for my ts6110 is super unresponsive, have to point it directly at the bar and press hard.
- how do i clean the fabric grille on the front of my alto 6+ without ruining it? it's got dust stuck in it.
- there's a constant low static or hiss from the soundbar speakers even when no sound is playing.
- my soundbar keeps switching to bluetooth mode by itself when i'm watching tv through the optical cable.
- the subwoofer for my ts6110 just stopped connecting, soundbar works but no bass. the light on the sub is solid.
- my tcl alto 6+ soundbar won't power on at all, no lights, nothing. tried different outlets.
- after a power outage, my ismartgate pro is on but the app says 'device offline'
- the tilt sensor just shows '--' in the app instead of an angle, is it broken?
- my garage door opens by itself randomly in the middle of the night with the pro installed
- can't get the pro to connect during setup, my phone just keeps searching forever
- why does my ismartgate pro show the door is open in the app when i know i just closed it?
- the battery on my tilt sensor dies in like a week, is this normal?
- installed my pro but the door won't move when i press the button in the app, just hear a click from the opener
- my ismartgate pro just has a solid red light on the unit and the app won't connect to it anymore
- the 'clean' light is on and won't go off even after i ran the cleaning cycle
- water is leaking from the bottom of my philips 3200, underneath the machine
- machine is making a loud grinding or buzzing noise when i try to make coffee
- the milk frother on my lattego isn't frothing, just warm milk comes out
- my coffee comes out really weak and watery no matter what strength setting i use
- getting a 'descaling' message but i just descaled it last month, how do i clear it?
- philips 3200 says 'add coffee beans' but the hopper is full, what's going on?
- my philips 3200 lattego won't turn on at all, no lights, nothing, just bought it
- how do i factory reset my stelpro maestro? i'm moving and need to wipe my settings.
- the temperature reading on my maestro seems way off compared to other thermometers in the house.
- the schedule on my maestro keeps resetting or disappearing, how do i make it stick?
- my maestro thermostat screen is flickering or looks really dim, even with the brightness turned up.
- why is my maestro thermostat clicking really loud every time it turns the heat on or off?
- how do i connect my maestro to wifi? the app just won't find it during setup.
- stelpro maestro keeps saying 'heating equipment error' and then shuts off, what does that mean?
- my stelpro maestro thermostat screen just went blank and won’t turn on at all, any ideas?
- why does my frigidaire microwave keep tripping the fuse as soon as i press start?
- i can't get the vent on this thing to switch from recirculating to outside venting, it just seems stuck
- the touchpad on my frigidaire microwave isn't responding, some buttons work and others don't
- my frigidaire microwave just beeps continuously for no reason, even with the door closed
- the light bulb under my frigidaire microwave burnt out, how do i even change that thing?
- how do i get the damn turntable to stop squeaking every time it rotates, it's driving me nuts
- the vent fan on my frigidaire microwave is crazy loud on any setting, sounds like a jet engine
- my frigidaire microwave just shows PF and won't start, i already tried unplugging it
- the auto suction on my s15 isn’t working, it just stays on the lowest setting even over thick carpet.
- there’s a high pitched whining or grinding noise coming from the brush head area, not the normal motor sound.
- my tineco keeps shutting off after like 5 minutes, the battery icon shows full but it just dies.
- the suction on my pure one feels really weak all of a sudden, like it’s not picking anything up.
- i can’t get my s15 flex to connect to the tineco app on my phone, it just keeps searching forever.
- why does my tineco smell like burnt dust or electronics when i use it, even with an empty bin?
- the roller brush on my pure one s15 keeps stopping and the app says ‘main brush blocked’, but there’s nothing stuck in there.
- my tineco s15 flex just flashes a blue light and beeps at me, won’t start cleaning at all, what’s up with that?
- the knobs for the french doors feel super loose and wobbly, like they might fall off. can i tighten them?
- the light inside the oven won't turn on anymore, so i can't see my food cooking. is the bulb replaceable?
- i get an error code 'e3' or sometimes 'e4' on the screen and it shuts down. what does that mean?
- the air fry function doesn't seem to cook things right, my fries are soggy not crispy. am i doing something wrong?
- how do you clean the inside back wall where the fan is? grease seems baked on and i'm scared to damage it.
- the touchscreen on my emeril 360 is completely unresponsive, i can't press any buttons or turn it off.
- why is my air fryer oven making a loud humming or buzzing noise when the convection fan is on? it's way louder than it used to be.
- my emeril 360 air fryer oven just beeps three times and won't start, the display just shows numbers but nothing happens.
- the little rubber cap in the center of the lid won't stay in, it keeps popping out when i blend.
- after making a soup, my blender won't turn on again for like 20 minutes, what's up with that?
- when i use the ice crush function it sounds terrifying, like it's gonna explode, is that normal?
- the plastic jug on my fresh and furious has cloudy scratches all inside, can i still use it?
- my blender's touchpad buttons aren't responding sometimes, i have to press really hard.
- how do i clean the rubber ring seal on the blade of my breville blender? it smells funky.
- the blending seems weak on my fresh and furious, like it's struggling with frozen fruit, is it broken?
- my breville fresh and furious just flashes the red light and won't start, what's the deal?
- can i wall mount this polk soundbar? the manual is useless and i don't see brackets.
- the subwoofer that came with my signa s2 suddenly has no sound. the soundbar works fine.
- the dialogue from movies is really hard to hear, but the music and effects are too loud.
- how do i connect my phone via bluetooth to the signa s2? i can't find the button.
- the remote for my polk soundbar stopped working. i changed the batteries, no luck.
- my signa s2 makes a constant low humming or buzzing sound, even when nothing's playing.
- the soundbar turns on but there's no sound from my tv. the optical cable is connected.
- my polk signa s2 soundbar won't turn on at all, no lights, nothing. it's plugged in.
- my tailwind worked fine for months, now it just shows a solid red light and doesn't respond.
- the tailwind makes a loud, rapid clicking sound from the unit itself when i try to operate the door.
- how do i add a second phone to my tailwind? my partner can't get it to work on theirs.
- installed my tailwind iq3 but now my garage door won't close all the way, it reverses about an inch up.
- the tailwind app says my controller is 'offline' but the light on it is solid blue.
- my garage door randomly opens by itself in the middle of the night with the tailwind iq3, it's creepy and not safe.
- the auto-open feature stopped working on my tailwind, it just sits there when i pull in the driveway now.
- my new tailwind iq3 just flashes red and blue and never connects to my phone, what am i doing wrong?
- the basket is stuck in my dash air fryer, i can't pull it out, how do i get it free without breaking it?
- my air fryer is smoking like crazy the first time i use it or after cleaning, did i ruin it?
- the timer knob on my dash feels weird and sometimes turns past 30 minutes, does it just keep going or is it broken?
- how do i clean the heating element part inside my dash air fryer? it has grease and stuff stuck up there that won't come off.
- food keeps coming out soggy on the bottom in my dash tasti-crisp, not crispy at all, am i doing something wrong?
- the non-stick coating on my dash fryer basket is starting to peel and flake off, is it safe to use and can i fix it?
- my air fryer makes a loud rattling noise when it's running, sounds like something is loose inside, is it broken?
- my dash tasti-crisp air fryer just won't turn on when i plug it in, no lights or anything, what do i do?
- i got a new phone and now the glas app won't find or connect to my thermostat. it still works on the wall.
- the temperature reading on my glas seems way off compared to other thermometers in the house.
- how do i clean the white plastic outer case? it's getting yellow and dirty but i'm scared to damage it.
- my glas is making a quiet but annoying high-pitched buzzing or humming sound from the unit itself.
- the touchscreen on my glas is going crazy, selecting things by itself or not responding to my touch.
- why is my glas thermostat disconnecting from wifi constantly? i have to keep re-adding it.
- glas says 'no equipment detected' during setup and won't control my heat or ac. what do i do?
- my glas thermostat screen is totally black and unresponsive, won't turn on at all. checked the breaker.
- the grease filter on this sharp microwave is stuck, i can't slide it out to clean it
- sharp microwave display shows F1 or F2 error code and beeps, can't use any functions
- the light inside my sharp microwave won't turn on, either with the door open or when cooking
- my sharp microwave's turntable won't spin at all, just sits there while the food cooks unevenly
- cleaned my sharp microwave and now the touchpad buttons don't work right, some just beep and do nothing
- the vent fan on my over the range sharp microwave turns on by itself randomly, how do i stop it?
- sharp r-1874t making a loud humming or buzzing noise when it runs, sounds like a bad fan
- my sharp r1874t microwave just stopped working, the clock is on but it won't heat anything when i press start
- the led worklight on the front flickers or doesn't come on, but the saw still runs.
- saw suddenly lost power mid-cut, sounds weak now even with fresh batteries.
- the depth adjustment lever is super stiff and hard to move, feels like it's going to break.
- dust port on the side gets clogged instantly, even with a shop vac attached, and dust blows everywhere.
- the saw's electric brake doesn't seem to work, blade spins for a long time after i let go of the trigger.
- my saw is smoking a little and smells like burning plastic from near the motor housing.
- the blade on my rear handle saw wobbles side to side when it's running, not cutting straight anymore.
- my makita xsr01z saw just beeps when i pull the trigger and doesn't spin at all, what's wrong?
- all the lights on the front are blinking at the same time and it's totally unresponsive, help.
- can't get it to print on 11x17 tabloid size paper, it always defaults to letter and jams.
- it's making a loud grinding noise from the right side when it starts up or tries to print.
- the adf (automatic document feeder) on my wf-7840 is chewing up pages and jamming every time i try to scan more than a few sheets.
- getting a lot of streaks and banding on my color prints, i just replaced the ink cartridges.
- setup keeps failing when trying to connect my wf-7840 to wifi, it just won't find my network.
- printer says 'replace maintenance box' but it's not even half full, can i reset it or do i really need a new one?
- my wf-7840 just keeps flashing the power light red and won't print anything, what's wrong with it?
- the pitcher for my ultra trio is crazed and cloudy after a few months, looks terrible. is it safe?
- my blend doesn’t get smooth, there’s always chunks at the top even after running it a full cycle.
- how do you clean the stupid gasket under the blades on this thing? it always gets disgusting.
- the green power light on my 650gm stays solid but none of the speed buttons work, it’s completely unresponsive.
- why is my trio blender making a horrible grinding or rattling noise, way louder than usual?
- i just got my velocity ultra and the light turns on but the blades won’t spin at all, just sits there humming.
- the touchpad on my bfp-650gm is going crazy, it’ll turn on by itself or speed buttons don’t respond right.
- my cuisinart velocity ultra trio (650gm) starts blending but then the motor slows down and the lights dim like it’s struggling.
- my jbl bar 2.0 won't turn on at all, no lights, tried different outlets.
- the sound cuts out for a split second every few minutes on hdmi arc, no issues with bluetooth.
- how do you clean the fabric grill on the jbl bar 2.0? it's collecting dust and i'm scared to ruin it.
- the volume on my jbl bar is way too low even at max, especially compared to my old tv speakers.
- soundbar keeps randomly switching from hdmi arc back to bluetooth by itself, super annoying.
- jbl bar 2.0 remote isn't working at all, tried new batteries and everything.
- i hooked up the jbl bar 2.0 with the optical cable but there's this constant faint hissing or static noise.
- my jbl bar 2.0 soundbar just shows a solid white light on the side but i get zero sound from anything.
- i installed my skylink atoms but the door won't go all the way down, it reverses about an inch from the floor
- my atoms opener makes a loud grinding noise when it starts to move the door but then it runs fine
- the remote for my skylink atoms only works when i'm right next to the garage, it used to work from the driveway
- how do i reset the wi-fi on my skylink atoms opener? the app lost it and i can't reconnect
- the status light on my atoms opener is flashing red, what does that mean?
- my garage door opens by itself randomly in the middle of the night with the skylink atoms
- the keypad on my skylink atoms stopped working, the light comes on but none of the buttons register
- my skylink atoms garage door opener won't connect to the app, it just says 'connecting' forever and then fails
- water is leaking from the bottom front of the washer, pooling on the floor.
- it’s vibrating and walking across the floor during the spin, really loud.
- washer won’t turn on at all, no lights, no sounds, completely dead.
- there’s a musty smell coming from inside the washer drum, how do i clean it?
- clothes are sopping wet at the end of the cycle, washer isn't spinning out enough water.
- error code F7 E1 keeps showing up on my maytag washer, what does that mean?
- my maytag top loader is stuck on sensing and won’t fill with water, just keeps cycling. what’s going on?
- my grill keeps shutting off randomly in the middle of a cook, no error code, just goes dead.
- just assembled my new tailgater and it won't turn on at all, no lights on the controller.
- the fan on my traeger sounds really weak or sometimes stops, and then the temp drops.
- how do i clean the grease drain and cup on this thing? it's a huge mess and always leaks.
- my tailgater struggles to get over 300 degrees, it just sits around 250 even when i set it to 350.
- i can't get my traeger app to find or connect to my tailgater grill, it's just stuck searching.
- why does my tailgater make a loud, annoying clicking sound every few minutes while it's running?
- my traeger tailgater 20 just shows 'err' on the controller and won't heat up, what do i do?
- the soap dispenser isn't opening on my frigidaire, i find the detergent pod still in there after a wash.
- my dishwasher stops mid cycle and just beeps three times, then nothing.
- the door on my frigidaire dishwasher is really hard to close, i have to slam it.
- the bottom of my dishwasher has standing water after a cycle, it's not draining.
- dishes are coming out wet and kinda filmy, not drying at all even on heated dry.
- my dishwasher is making a loud grinding noise during the wash cycle, sounds like it's chewing rocks.
- the display on my frigidaire dishwasher just shows three dashes "---" and it won’t do anything.
- my frigidaire dishwasher won’t start at all, no lights, no nothing. just dead.
- my dyson gen5detect battery is draining super fast, like 10 minutes on eco mode, is it shot?
- how do i clean the roller bar on the gen5detect fluffy head? it's wrapped tight with hair and won't spin.
- the suction on my dyson gen5detect seems really weak all of a sudden, even on max mode.
- i just got my gen5detect and it shuts off after like 5 minutes even on a full charge, is it defective?
- the display screen on my gen5detect is blank or frozen, buttons still work but no info.
- my dyson gen5detect is making a high-pitched whining or grinding noise when i use it, sounds bad.
- the green laser on my gen5detect floor head is really dim or flickering, did i break it?
- my dyson gen5detect won't turn on at all, no lights or anything, what's wrong with it?
- the convection fan in my oven sometimes turns off by itself mid-cycle, then the food isn't cooking right. is it overheating?
- i can't get the wire air fry basket clean, grease is stuck in all the little squares. dishwasher isn't doing it.
- the door on my toa-70 won't close all the way unless i really slam it. is there an adjustment or is it broken?
- my oven keeps beeping and flashing 'F1' on the display. what does that mean and how do i make it stop?
- the air fry function on my oven doesn't seem to crisp things up, food comes out soggy. am i doing something wrong?
- how do i get the baked-on grease off the inside glass door of my toa-70? it's hazy and regular cleaner isn't cutting it.
- why does my air fryer oven make a loud clicking or tapping noise when it's heating up? sounds like metal expanding but it's really loud.
- my cuisinart air fryer oven screen is just blank and it won’t turn on at all, no lights or anything. what gives?
- the fan on my system won't turn off even when the heat or ac isn't running, and my lux geo says fan is in auto mode.
- the schedule i set on my lux geo keeps disappearing or resetting to default.
- i replaced the batteries but my lux geo still won't turn on or come off the wall.
- my lux geo keeps switching from heat to cool by itself, it won't stay in the mode i set.
- how do i clean the touch screen on my lux geo? it's all smudgy and sometimes doesn't register my presses.
- the temperature reading on my lux geo is way off, it says 75 but it feels like 68 in here.
- my lux geo says it's connected to wifi but i can't control it from the app, it just says offline.
- my lux geo thermostat screen is completely blank, no power at all. what gives?
- the interior light bulb burned out, how do i change it on this over-the-range model?
- the vent fan seems weak, it doesn't pull any smoke from the stove
- the clock and settings keep resetting every time i turn off the kitchen breaker
- the turntable motor stopped spinning, my plate just sits there
- how do you clean the grease filter on this thing? it looks like it doesn't come out
- it makes a loud humming or buzzing noise when it runs, way louder than it used to
- the light and fan come on but it won’t heat up when i press start, no error code
- my lg microwave just shows F-3 on the display and won’t do anything, what does that mean?
- i replaced my filter but the water still tastes funny, like it's not filtering
- the pitcher itself is getting this cloudy, white film on the inside that won't wash off
- water is pooling in the top reservoir and not going through the filter at all
- the filter status meter thing on the lid isn't moving after i put in a new filter
- black specks are showing up in my filtered water in the bottom of the pitcher
- my lifestraw pitcher lid is leaking from the sides when i pour, not the spout
- the water is dripping super slow from the top part into the pitcher, takes forever to filter
- my lifestraw pitcher water tastes kinda plasticy even after a few cycles, what gives?
- the power button does nothing, no lights, no sound, completely dead.
- condensation is leaking out from the bottom of the unit onto my floor.
- the remote just stopped working, even with new batteries. unit buttons work fine.
- how do you clean the filter on this thing? i can't figure out how to get to it.
- my homelabs portable ac is running but it's not cooling the room at all, just blowing slightly cool air.
- it's making a loud grinding or rattling noise, mostly when the fan or compressor kicks on.
- the water tank full light came on but the bucket is totally empty, now it won't run.
- my homelabs portable ac unit just keeps flashing e1 and won't start cooling, what's that about?
- my nutribullet combo 1200 just suddenly stopped working, no lights, no power, nothing. i checked the outlet.
- the power light on my nutri bullet base is on but absolutely nothing happens when i press the blend button.
- can't get the blade off the big nutri bullet cup to clean it, it's stuck on there super tight.
- my nutribullet 1200 is making a loud grinding noise, like gears stripping, only when i blend hard stuff.
- the personal cup for my nutribullet combo leaks from the bottom every time i make a shake, did i get a defective one?
- how do you clean the extractor blade on the nutribullet combo? it's got gunk stuck under the seal and i can't get it off.
- my nutribullet 1200 smells like burnt plastic and sometimes just stops mid blend, what gives?
- why does my nutri bullet 1200 just light up but the motor won't actually start when i press the button?
- bluetooth won't stay connected to my phone, it drops after a few minutes every time.
- the dialogue setting doesn't seem to do anything, voices are still hard to hear over music and effects.
- how do i clean the fabric grill on the front without wrecking it? it's collecting dust.
- there's a weird static or crackling noise coming from the speakers, especially during quiet scenes.
- soundbar keeps switching inputs on its own randomly, like from hdmi to bluetooth.
- my vizio v21-h8r subwoofer is connected but there's no bass, it just sounds tinny.
- soundbar turns on but no sound comes out, just a blinking white light on the front.
- my vizio v21 soundbar just has a solid red light and won't respond to the remote at all, what do i do?
- my genie opener won't connect to my car's built-in homelink system, the light just flashes
- i need to change the direction my genie garage door opens from but can't find the switch
- the chain on my genie opener is super loud and jerky, sounds like it's grinding or skipping
- genie chainmax light won't turn off automatically anymore, it just stays on for hours
- my garage door only goes down a few inches then immediately reverses back up with the genie opener
- how do i reprogram my genie chainmax keypad after the batteries died, the instructions are long gone
- genie chainmax remote works sometimes but mostly it just doesn't respond from the car, have to get real close
- my genie chainmax 1000 opener just hums really loud when i press the button but the door won't move at all
- i get a mouthful of sludge or grounds in my cup every time i use my own reusable k-cup
- the handle feels loose and wobbly on my keurig, like it doesn't latch down tight anymore
- my coffee is always lukewarm from my k-express, even on the first cup of the day
- water is leaking from the bottom of my keurig, right under where the pod goes in
- the brew button on my k-express won't light up or respond when i press it, machine has power
- barely any coffee comes out of my keurig, just a slow drip and a really weak cup
- my k-express essentials is making a horrible grinding noise when it tries to brew, like it's struggling
- my new keurig k-express essentials just flashes the 'add water' light even though the reservoir is totally full, what gives?
- the 'full' indicator light comes on after only a handful of cubes, basket is nowhere near full
- it says it's making ice but the basket is empty, no ice is dropping
- water is leaking from the bottom of the unit, pooling underneath it
- my magic chef portable ice maker won't turn on at all, no lights, nothing
- the ice tastes weird or has a plastic smell, even after a few cycles
- it's making a loud grinding or buzzing noise when it's supposed to be dropping ice
- ice maker is running but the cubes are tiny or thin, like slivers, not the full squares
- my magic chef ice maker just keeps flashing the red 'water' light even though it's full, won't make ice
- my google nest wifi pro point just has a solid red light and won't connect to the mesh
- the wifi speed on my nest wifi pro is way slower than my old router, i'm not getting anywhere near gigabit
- my devices keep switching to the far away point instead of the one right next to them, speed is terrible
- how do i factory reset my nest wifi pro router, the button on the bottom does nothing when i press it
- my nest wifi pro gets really hot to the touch on the top, is that normal or is it going to break
- i keep getting a 'device is offline' error in the google home app for my main router but wifi still works
- the light on my nest wifi pro is solid orange and won't change, internet is down
- my nest wifi pro router just has a pulsing white light and my phone can't find it to finish setup
- leisure 3 projector turns on for a second, the fan spins, then it just shuts off. no light, nothing.
- why is the movie i'm streaming from my phone to the leisure 3 so choppy and laggy?
- hdmi port on my vankyo feels loose and the picture cuts in and out, did i break it?
- i see a weird dark shadow or blob in the corner of the picture from my leisure 3, like a smudge on the lens but it won't wipe off.
- my remote for the vankyo projector stopped working completely, do i need a new one?
- why won't my vankyo connect to my wifi? it just keeps searching forever and never finds my network.
- the fan in my leisure 3w is ridiculously loud, sounds like a jet engine, is this normal?
- just got my vankyo leisure 3 and the picture is super blurry no matter how i focus the lens, what gives?
- i’m getting no sound from my built-in tv speakers when i switch to an hdmi input like my playstation
- the motion on my qled looks weird and jittery during sports or fast scenes, even with motion smoothing off
- my tv remote (tm2340a) is super laggy or doesn’t respond unless i point it right at the tv
- how do i properly clean the screen on my qn43q60d without messing up the coating?
- there's a faint but annoying high pitched buzz coming from the back of my samsung qled, is this normal?
- my qn43q60d keeps saying network disconnected even though my wifi is fine, streaming apps won’t open
- my new samsung 60d tv won't power on, no lights, nothing at all, it's like it's dead
- the brush head keeps popping off while i'm brushing, it's super annoying
- it won't stay clicked onto the charger base, just falls over
- the red charge light on the base stays on solid even when i take the brush off
- my toothbrush turns on by itself in the middle of the night, just starts buzzing on the charger
- how do i clean the gross gunk out of the little hole where the brush head goes?
- the battery on my vitality is terrible now, runs for like 30 seconds after a full charge
- why does my flossaction brush head not spin anymore? it just kind of vibrates weakly.
- my Oral-B vitality just blinks red and then stops, won't turn on or charge at all
- all the lights on my xr1000 are off but the power brick feels warm. it just died on me.
- the dumaos interface is super laggy and freezes when i try to change settings. is my router broken?
- i can't get open nat type on my playstation with the xr1000, it's always type 2 or moderate.
- the router keeps randomly rebooting, white light goes off and then comes back on after a minute.
- my wifi speed is way slower than what i'm paying for, but ethernet from the router is fine. what gives?
- the geo-filter on my xr1000 keeps kicking my friends out of the party even though they're in the same state.
- how do i get into the settings? routerlogin.net just times out on my xr1000.
- my nighthawk xr1000 router shows a solid white light but i have no internet connection, what's up with that?
- how do i clean the lens on my stick up cam battery? it's all blurry from pollen and dust
- my ring camera keeps going offline randomly throughout the day and then coming back
- i get a 'low battery' warning but the battery is fully charged, this thing is brand new
- the infrared night vision on my stick up cam looks super grainy and white, can't see anything at night
- my ring camera's motion alerts are delayed by like 5 minutes, makes it useless, how do i fix this?
- the battery on my ring stick up cam dies in like a week, it's supposed to last months, what gives?
- why does my stick up cam battery say 'live view failed' every single time i try to check it?
- my new ring stick up cam battery won’t connect to wifi during setup, the light just keeps spinning blue
- after a power outage, my adel70lw won't turn back on at all, no lights, nothing. checked the outlet and it's live.
- the pump on my ge dehumidifier sounds like it's running but no water is coming out the hose, just a trickle.
- how do you clean the filter on this model? i can't figure out how to get to it and the manual is useless.
- it's not pulling any water out of the air, bucket stays dry, but the fan is running. humidity in the room is high.
- the wifi on my smart dehumidifier just won't connect no matter what, the app says it can't find the device.
- this thing is SO loud, like a rattling or buzzing noise coming from the front, is this normal for a ge 70-pint?
- got an e1 error on the display of my ge dehumidifier, can't find what it means in the little guide.
- my new ge adel70lw just runs and runs and never shuts off, the bucket is full and it's still going, what gives?
- the battery life on my spinwave is terrible now, dies after like 10 minutes on a full charge
- my mop is making a loud grinding or rattling noise from the brush head area
- the dirty water tank on my spinwave doesn’t seem to suck up much water, the floor stays wet
- bissell spinwave won’t turn on at all, no lights, nothing. i checked the outlet
- the handle on my 2039a feels loose and wobbly, it clicks when i push forward
- my hard floor expert mop leaves streaks and a filmy residue on my tile, what am i doing wrong
- the brush head on my bissell spinwave spins slow and sounds weak, like it’s struggling
- my spinwave 2039a mop just stopped spraying water mid-clean, the tank is full but nothing comes out
- the picture looks washed out during the day even with blinds closed, do i just need a special screen?
- the remote for my hisense pl1 just stopped working, even with new batteries.
- the built-in android tv on my pl1 is super laggy and apps keep crashing.
- how do i clean the lens on this thing? it's huge and i'm scared to scratch it.
- my hisense pl1 is making a loud buzzing or whining noise, it's not the normal fan sound.
- my projector keeps turning on by itself or turning my soundbar off in the middle of the night, it's creepy.
- the corners of my pl1 image are blurry or out of focus no matter how i adjust, the center is sharp.
- my hisense pl1 projector won't turn on at all, no lights or anything, it's just completely dead.
- the brush head is stuck on my burst handle and i can't twist it off, i'm afraid i'll break it.
- can you replace the battery in a burst toothbrush or is it just done when it dies?
- my toothbrush turns itself on randomly in the middle of the night, it's creepy. why would it do that?
- the blue light on my burst charger base stays on solid even when the brush isn't on it. is that normal?
- how do you even clean the gross gunk out of the crack where the brush head attaches? it's kinda nasty.
- my brush turns on but it's way weaker than it used to be, feels like a sad vibration instead of a clean.
- just got my burst brush and it won't turn on at all, not even when i put it on the charger. did i get a dud?
- my burst sonic toothbrush head just spins loosely and won't stay on tight, what's the deal?
- the fridge beeps at me randomly, like three beeps in a row. what's it trying to tell me?
- the doors on my french door fridge don't seem to seal right at the middle where they meet. is there an adjustment?
- my fridge feels cool but not cold, and the freezer seems weak too. temperatures are reading in the 50s.
- the digital display on the front of my fridge is completely blank, no lights, nothing. is the power out?
- there's water pooling in the bottom of my fridge, under the crisper drawers. where's it coming from?
- ice maker isn't making any ice, the bucket is just empty. light is on but nothing's happening.
- the water dispenser on my krfc704fps is super slow or just drips, what gives?
- my kitchenaid fridge is making a loud gurgling or bubbling noise that goes on for a long time, is it broken?
- my archer ax55 keeps randomly rebooting itself a couple times a day, it's driving me nuts
- how do i port forward on the archer ax55? i can't find the virtual server menu anywhere
- the wifi speed on my ax55 is way slower than my internet plan, like i'm only getting 100mbps on a gigabit connection
- i can't access tplinkwifi.net or 192.168.0.1 to get into my router settings anymore
- my tp-link ax55 gets really hot to the touch on the top, is that normal or is it gonna burn out?
- the internet light on my ax55 is red and i have no connection, what does that mean?
- why does my archer ax55 randomly drop the 5ghz signal? my phone just loses wifi until i toggle it off and on.
- my new tp-link ax55 won't get past the orange light during setup, it just sits there blinking
- why does my tv keep switching to the live tv antenna input by itself in the middle of watching netflix?
- the magic remote for my 55ur9000 is super laggy and unresponsive, especially the pointer, new batteries didn't help
- how do i clean the screen on this thing? the microfiber cloth just smears it and i'm scared to damage it
- tv makes a faint clicking sound every few minutes, not from the speakers, is it broken?
- screen looks really dark in hdr mode on disney plus and netflix, is something wrong?
- the lg home dashboard keeps popping up randomly on its own, how do i stop it?
- just got this lg 55ur9000pua and the wifi keeps dropping every few minutes, have to keep reconnecting it
- my new lg 55ur9000 keeps saying 'no signal' on every hdmi port even though my fire stick works on my old tv
- how do i clean the camera pro lens without messing up the coating or leaving streaks?
- the camera pro live view takes forever to load or just fails with a spinning wheel.
- getting a 'motion detection unavailable' error on my camera pro and it won't record clips.
- my camera's night vision is terrible, everything is just dark shadows or the image is all washed out bright.
- camera pro lens looks blurry or hazy all the time, especially during the day. already tried wiping it.
- set up my new camera pro but the app is stuck on 'activating device' for like an hour.
- why is my outdoor camera pro making a constant faint buzzing or humming noise? it's coming from the unit itself.
- my simplisafe outdoor camera pro just keeps saying 'camera offline' in the app no matter what i do.
- i’m trying to use the continuous drain hose on my d50bp but the water still fills the bucket first.
- the fan speed on my friedrich seems weak even on high, and it's not moving much air out the top vent.
- water is leaking from the bottom of my d50bp, not from the bucket overflow. it's pooling under the unit.
- the friedrich dehumidifier won't turn on at all, no lights, nothing. i checked the outlet and it's good.
- how do you clean the friedrich d50bp filter? can i just rinse it or do i need to buy a new one?
- my d50bp is making a loud gurgling or bubbling noise from inside, is that normal?
- friedrich d50bp fan is running but it’s not pulling any water out of the air, humidity isn't dropping
- my friedrich d50bp dehumidifier just keeps showing the bucket full light even though i emptied it, what’s going on?
- the fan on my cinebeam is crazy loud all of a sudden, like it's running at full speed even when the picture is dark.
- i see a weird dark shadow or blurry spot in the corner of the image from my lg projector. it doesn't go away.
- the built-in smart apps (like netflix) are super slow and keep freezing on my pu700r. my wifi is fine.
- the auto keystone on my lg cinebeam keeps making the picture a trapezoid instead of fixing it. it's driving me nuts.
- my projector says 'no signal' but everything is plugged in. using hdmi from my fire tv stick.
- how do you clean the filter on the lg cinebeam? i can't find it and the manual is useless.
- lg pu700r making a high-pitched whining or buzzing noise, seems to be coming from the lens area. is this normal?
- my new lg cinebeam pu700r won't turn on at all, the power button light just blinks red a few times and then nothing.
- it won’t hold a charge for more than a couple brushes now, used to last weeks
- the different modes don’t feel any different, it’s just the same intensity on all settings
- how do i clean the gunk out of the little hole where the brush head goes? it’s gross
- it’s way too loud and vibrates really rough now, didn’t used to be like this
- the charging light on my aquasonic base just stays solid red, never turns green even after all night
- my toothbrush turns on by itself in the middle of the night, just starts vibrating on the charger
- the brush head on my aquasonic ultra whitening keeps coming loose and flying off while i’m brushing
- my aquasonic black series toothbrush just stopped turning on and it’s fully charged i think
- the fridge just beeps at me randomly, like three beeps in a row, but there's no error code on the display.
- my french door fridge isn't sealing right on the right-hand door, i can see a gap and feel cold air leaking.
- the digital display on my maytag fridge is completely blank, no lights, but the fridge seems to be running.
- the ice maker stopped making ice, the arm isn't stuck up but nothing happens.
- condensation or water pooling at the bottom of the fridge compartment, right under the veggie drawers.
- my fridge is running all the time and never seems to shut off, freezer's cold but fridge section is barely cool.
- the water dispenser on my maytag fridge is super slow, just a trickle, but the ice maker seems okay.
- my maytag french door fridge is making a loud buzzing or humming noise that just started and won't stop.
- can i add a third-party switch to one of my xt8 nodes to get more wired ports? my office only has one.
- after the latest firmware update, my zenwifi feels slower and i see 'system process' using high cpu in the app.
- my asus router app says one of my xt8 nodes is 'offline' but the light on it is solid white.
- the led lights on my zenwifi nodes are too bright in the bedroom, can i turn them off completely?
- how do i get my xt8 to work with my isp's modem/router combo unit? it keeps causing a double nat.
- i keep getting randomly disconnected from my zenwifi for a few seconds, especially on video calls, it's driving me nuts.
- why is the internet speed from my xt8 nodes so much slower than what i get from the main router?
- my asus xt8 mesh system shows a solid red light on one of the nodes and won't connect, what do i do?
- i get a 'failed to connect to server' error in the motorola connect app when i try to view the camera remotely.
- the sound on the parent unit is really crackly and staticy, especially when the baby cries. is the microphone broken?
- the parent unit says 'no signal' but the camera's power light is on solid. what gives?
- the camera keeps disconnecting from the parent unit every night, but it's fine during the day.
- how do you clean the camera lens without scratching it? it's got baby fingerprints and dust all over it.
- the screen on the parent unit just went black and won't turn back on, but i can hear the charging sound when i plug it in.
- the camera makes this loud, high-pitched whining or buzzing noise all the time, even when it's not playing music or talking.
- my halo plus baby camera won't connect to wifi no matter what i do, it just keeps failing during setup.
- the remote just stopped working, new batteries didn't fix it
- there's a faint high pitched whine or buzz coming from the back of the tv, only when it's on
- i get no sound from my xbox when i plug it into hdmi 2, but the picture is fine
- the smartcast home screen is so slow and laggy, takes forever to load netflix
- tv turns on by itself in the middle of the night, it's creepy
- how do i clean the screen on this thing? the microfiber cloth just smears it more
- why does my p65q9-j01 keep losing the wifi connection and buffering constantly?
- my new vizio p-series just shows a black screen with backlight on when i turn it on, sound works fine though
- water got inside the camera dome after a heavy storm and now the lens is fogged up from the inside. is it ruined?
- playback keeps failing when i try to watch recordings saved on the sd card, says file corrupted or just spins. how do i fix the sd card?
- i can hear people through the camera but they can't hear me when i talk through the two-way audio, it's just silent on their end.
- the white spotlight on my deterrence camera never turns on, even when it detects a person at night. what gives?
- my camera's motion alerts are going crazy, getting a notification every time a leaf blows by. can i make it less sensitive?
- the night vision on my lorex 4k camera is really grainy and almost foggy looking, daytime is fine. how do i fix the ir?
- lorex spotlight camera just shows a solid red light and won't do anything, no video. is it bricked?
- my new lorex camera won't connect to the app, it just keeps searching forever on the wifi setup step. what am i doing wrong?
- it turns on for a few minutes then shuts off by itself, and the bucket isn't full. it just cycles on and off.
- the display works but none of the buttons on the control panel do anything. it's stuck on one setting.
- i want to use the continuous drain hose but can't figure out where it connects or how to set it up.
- it's making a loud gurgling or bubbling noise, like water is trapped somewhere inside. is that normal?
- how do i clean the inside of this thing? it's starting to smell musty when it runs.
- the fan runs but the compressor never kicks on, so it just acts like a fan. what's wrong with it?
- my danby 50-pint unit is running but not collecting any water in the bucket, just blowing damp air.
- my danby dehumidifier just shows a constant 'co' on the display and won't start, what is that?
- it won't switch modes, i press the button but it's stuck in just brushing mode and won't go to floss.
- the brush head keeps popping off mid-brush, it doesn't feel locked on anymore.
- how do i clean the mold or pink gunk out of the inside of the water reservoir? it's in the seams.
- the bluetooth won't connect to the app on my phone, it just times out every time.
- my floss pressure is super weak no matter what setting i put it on, it just dribbles out.
- the water keeps leaking out from where the reservoir connects to the base, it never used to do that.
- why is my waterpik sonic-fusion so loud and vibrates like crazy all of a sudden? it sounds like a lawnmower.
- my sonic-fusion 2.0 flosser just blinks a red light at me and won't turn on, what do i do?
- freezer fan is making a grinding noise, sounds like something's stuck in there.
- the water filter indicator light is blinking but i just replaced the filter, why?
- doors on my french door fridge don't seem to seal right, i can feel cold air leaking.
- display on my ffhd2250ts is showing an error code like 'cf' or something, what does that mean?
- there's a loud buzzing noise coming from the back of my refrigerator, especially at night.
- fridge section of my frigidaire is not cold enough, food is spoiling quickly.
- water dispenser on my french door fridge is just a trickle, takes forever to fill a glass.
- my frigidaire ffhd2250ts ice maker is humming but no ice cubes are dropping, help?
- we just got a second hb6550 camera but the parent unit won't connect to it, just keeps searching
- the two-way talk on our hellobaby monitor has a terrible echo, i can hear myself talking back a second later
- the night vision on our hello baby camera is really grainy and dark, can barely see anything in the crib
- the video on our hello baby monitor is super laggy and choppy, like a slideshow, but the audio is fine
- my hb6550 parent unit won't hold a charge anymore, dies in like an hour even though it says full battery
- how do you clean the hello baby monitor camera lens? it's got a smudge and the video looks blurry now
- hello baby monitor making a constant high-pitched whining noise from the camera unit, it's driving us nuts
- our hello baby monitor parent unit screen just went black and won't turn back on, the little green light is still on though
- the remote control for my dr-968 stopped working, i changed the battery but it's still dead
- there's a weird plastic burning smell when i first turn it on this season, is that normal?
- my heater turns off by itself after a while even though it's not overheated and the room is still cold
- the tip over switch is too sensitive, my heater shuts off if the floor vibrates or my dog bumps it
- how do you clean this thing? the manual is vague and i don't want to break the inside parts
- the heater fan runs but no heat comes out, just blowing cold air after a few minutes
- dr-968 heater won't turn on at all, no lights, no fan, nothing. checked the outlet and it's fine
- my dr infrared heater just started making this loud clicking or rattling noise when it's running, sounds like something's loose inside
- after a power outage, my nest wifi pro comes back online but my smart home devices are all unresponsive
- can i hardwire my nest wifi pro points with ethernet for backhaul? the app doesn’t seem to recognize when i plug a cable in
- my devices keep getting kicked onto the guest network or losing connection after i set up a nest wifi pro system
- one of my points is making a faint but noticeable high-pitched whining or buzzing noise, is that normal?
- google home app says my nest wifi pro has a ‘weak mesh connection’ during setup, but the points are right next to each other
- why is the wifi speed on my 6ghz band so much slower than expected on my new devices? i have a gigabit connection
- my nest wifi pro point keeps disconnecting from the network randomly, showing as ‘offline’ in the google home app
- just got my nest wifi pro 3-pack and the main router unit has a solid orange light and nothing’s happening
- all the apps on my smart hub keep freezing or crashing, and the whole menu feels really slow.
- my samsung remote (the solar powered one) is super laggy or doesn't work unless i point it directly at the tv.
- i get a weird buzzing or humming sound from the back of the tv, seems like it's coming from the top right corner.
- the picture on my q60c looks really dim and washed out in hdr mode when i watch netflix or disney+.
- my tv keeps disconnecting from wifi every day and i have to go reconnect it manually.
- how do i clean the screen on this samsung qled without ruining the coating? it's got fingerprints and dust.
- the audio on my q60c keeps cutting out for a second every few minutes, especially when using the smart apps.
- my new samsung qled tv screen is black but the red standby light is on and it won't respond to the remote or the button on the tv.
- the two camera views on the S350 are out of sync in the app, the wide angle is like 5 seconds behind the telephoto
- i get a 'failed to format' error when i try to set up the homebase 3 microSD card for continuous recording
- the battery on my S350 drains super fast even though it's plugged in all the time, says 'charging' but never gets to 100%
- the person detection on my dual camera is terrible, it alerts me for every shadow or light change from the window
- eufy S350 keeps going offline in the app every day or two, have to unplug it to get it back online
- how do you clean the lens on the S350 without smearing or scratching it? the wide lens especially gets dusty
- the dual camera keeps making a loud clicking noise every few minutes, sounds like it's trying to focus over and over
- my eufy S350 indoor cam just shows a solid blue light and won't connect to wifi no matter what i try
- the fan runs but the compressor never kicks on, so it just blows room air
- it turns on for a minute then shuts off, over and over, never really runs
- the bucket is full light keeps coming on even after i empty it
- how do you clean the filter on this thing? i can't find a way to get it out
- it's making a loud gurgling or rattling noise, almost like water is sloshing around inside
- just got this keystone 50 pint, it's running but not collecting any water in the bucket
- my keystone dehumidifier just shows e1 on the display and won't run, what's that mean?
- there's water pooling in the bottom of my lg refrigerator, under the vegetable drawers
- the touch controls on the front of my lg fridge are unresponsive or beep when i don't touch them
- replaced the water filter in my lg fridge and now the water dispenser is super slow or just sputters
- how do i clean the water dispenser drip tray on this thing? it's gross and seems stuck in there
- the fresh food side of my lg fridge isn't cold enough but the freezer is fine, everything's kinda cool but not cold
- my lg fridge is making a loud buzzing or humming noise that comes and goes, it's driving me nuts
- the ice maker in my lg fridge stopped making ice, the bucket is just empty and the arm isn't down
- my lg side by side fridge is showing an 'er ds' error on the display and i have no idea what that means
- my phone gets notifications from the app but the parent unit doesn't make a sound for motion or cry alerts.
- the camera's status light is solid red instead of green or blue, what does that mean?
- the audio on the parent unit is really crackly and distorted, can barely hear the baby.
- i get an 'out of range' message on the parent unit even when i'm in the same room as the camera.
- vtech monitor parent unit battery drains super fast, like in an hour or two, won't hold a charge.
- how do you clean the camera lens on the vtech rm5764? it's got fingerprints and looks foggy.
- the baby monitor camera makes a loud, high-pitched whining or buzzing noise all the time, is it broken?
- my vtech monitor parent unit just shows a black screen with a spinning loading icon and never connects to the camera, what's wrong?
- the power light comes on but the heater won't start when i turn the knob to 1 or 2
- the tip-over switch is too sensitive, my heater shuts off if the floor is slightly uneven
- the fan speed on high and low seems the same, barely any difference in airflow
- my heater just stopped working, no lights, no fan, nothing. checked the outlet and it's fine.
- how do you clean the honeywell uberheat heater? it smells dusty when i turn it on
- the thermostat on my uberheat seems broken, it cycles on and off way too quickly
- honeywell ceramic heater making a loud clicking or popping noise when it first turns on
- my honeywell uberheat heater fan runs but no heat comes out, just cold air
- can i use my own desktop with the autonomous core frame? the one it came with is too small.
- the control panel on my desk just flashes the M light repeatedly and won't respond to anything.
- i assembled my core desk but it has a wobble side to side when i type. did i put it together wrong?
- my desk moves super slow and seems weak, like it struggles with just my monitors. it didn't used to do this.
- the hand control on my desk is totally dead, no lights at all. the desk is stuck at standing height.
- how do you clean the white top on the core desk without ruining it? i got some pen marks on mine.
- autonomous desk makes a loud grinding noise on one side when going up, but seems fine going down.
- my smartdesk core won't move up or down when i press the buttons, just beeps once. it's plugged in.
- the 2.4ghz network from my be800 keeps dropping for my smart plugs and lights, but the 5ghz is fine.
- trying to set up the be800 with the tether app and it just won't find the router during setup, it's stuck on searching.
- my wifi speed on the be800 is way slower than i expected, like not even close to my old router sometimes.
- how do i actually turn off those crazy bright rgb lights on the front? they're lighting up my whole room at night.
- the internet light on my be800 is red and i have no connection, but my modem is fine.
- why does my archer be800 make a faint but annoying high-pitched whining or buzzing sound?
- just got this wifi 7 router but my older laptop and phone can't even see the network, is it broken?
- my new be800 router just has a solid amber light on the front and won’t give out any wifi, what do i do?
- my tv randomly turns on by itself in the middle of the night, it's creepy.
- just set up my tv and there's no sound from the built-in speakers when using an hdmi device like my ps5.
- the remote for my tcl google tv is really inconsistent, have to press buttons multiple times or point it directly.
- the local dimming on my 55qm8 makes bright objects look like they have a dark halo or bloom around them, especially in hdr.
- how do you properly clean the screen on this mini-led? i'm scared to damage the coating.
- my tcl tv keeps disconnecting from wifi every few hours, have to restart to get it back.
- the google tv home screen on my qm8 is super laggy and unresponsive, it wasn't like this at first.
- my new tcl 55qm8 screen is black but i can hear the sound and the backlight is on, what gives?
- my blink mini 2 night vision is just a bright white blob in the middle of the screen at night
- i get a 'usb device not recognized' error on my pc when i plug in my blink mini 2, how do i get the local storage to work
- blink mini 2 makes a faint high pitched buzzing noise, is that normal
- why does my blink mini 2 record like 2 second clips when motion happens instead of the full 30 or 60 seconds i set
- blink mini 2 red light stays on solid and it won't connect or do anything
- how do you clean the lens on a blink mini 2 without smearing it or damaging the camera
- blink mini 2 live view is super laggy and choppy, takes forever to load
- my blink mini 2 camera keeps going offline every few hours and i have to unplug it to get it back
- condensation is leaking from the bottom of my dehumidifier, not into the bucket. it's making a puddle.
- the display says "cl" and won't let me do anything, even after i cleaned the filter.
- it's running but not pulling any water out of the air, humidity isn't dropping. bucket is empty.
- how do you clean the filter on this thing? the manual is useless and i can't figure out how to get to it.
- the wifi on my ud701kog3 keeps disconnecting from the lg thinq app, i have to keep re-adding it.
- why is my lg dehumidifier making a loud gurgling or bubbling noise from the back? sounds like water is stuck.
- lg puricare dehumidifier won't turn on at all, no lights, nothing. checked the outlet and it's fine.
- my lg ud701kog3 dehumidifier just beeps three times and the error light flashes, what's it trying to tell me?
- my baby monitor screen is flickering or has weird green lines sometimes, is it broken?
- how do i turn off that really loud out of range alarm on the infant optics, it scares me every time
- the temperature reading on the monitor is way off, showing 85 degrees when the room is 70
- battery on the monitor dies super fast, like in an hour, even though it's pretty new
- monitor says 'no signal' but the camera is definitely on and in the same room
- the camera lens on my dxr-8 pro looks foggy or blurry, i've wiped it but it's still not clear
- infant optics monitor making a constant high-pitched static noise from the speaker, how do i make it stop?
- my dxr-8 pro monitor screen just went black and won't come back on, the camera light is still on though
- my heater tips over really easy, the feet don't seem stable on my carpet. anyway to make it less wobbly?
- the fan speed on low doesn't seem any different than high, it's always blowing really hard.
- is it normal for the plastic casing on my vornado to smell really hot, like a burning plastic smell? it's new.
- the thermostat on my vornado mvh seems useless, it cycles on and off constantly even in a cold room.
- my heater's fan runs but no heat comes out, just cold air. what gives?
- how do you clean the filter on a vornado mvh heater? i can't figure out how to get to it.
- vornado mvh making a loud grinding or clicking noise when the fan spins up, sounds like something's hitting the blades.
- my vornado mvh heater just stopped working overnight, no lights, no fan, nothing. it was fine yesterday.
- my vari desk is uneven, one side goes up faster than the other
- the memory buttons on my vari handset don't save my height anymore
- can i use a monitor arm with my vari desk or will it crack the top
- how do i stop my vari desk from wobbling side to side when it's up high
- my desk makes a loud grinding or clicking noise from one leg when going up
- the controller on my vari desk is totally dead, no lights, no response
- vari standing desk just beeps three times and won't move at all, what do i do
- my vari desk goes up but then immediately drops back down an inch or two on its own
- can i run a hose from my honeywell tp50wkn directly to a floor drain? how does that work?
- water is leaking from the bottom of my dehumidifier, not from the bucket or the hose connection.
- the fan runs but it won't pull any water, humidity level doesn't budge. just bought it.
- the control panel on my honeywell dehumidifier is completely dead, no lights, won't turn on. checked the outlet.
- how do i clean the filter on my tp50wkn? i can't figure out how to get it out.
- why does my honeywell 50-pint dehumidifier keep shutting off after like 10 minutes? the bucket is empty.
- my honeywell tp50wkn dehumidifier is running but the bucket isn't filling up, what's wrong?
- i can't get the high pressure hose to click and lock onto the spray wand, it just pulls right off
- the motor on my ryobi sounds really loud and grinding, not the normal pump sound
- my pressure washer runs fine but then just loses all pressure and only sprays a trickle
- the chemical injector on my ryobi 2300 isn't pulling soap, it just sprays plain water
- water is leaking from the bottom of the pump on my ryobi, right where the housing connects
- ryobi pressure washer turns on for a second then shuts off by itself, the green light goes out
- the pressure is really weak or pulsing on my ryobi electric washer, like it's surging
- my ryobi pressure washer just hums loudly but the pump won't actually start when i pull the trigger
- after the latest firmware update, my alien's 5ghz wifi just disappeared and all my devices are stuck on 2.4.
- the wifi signal from my alien mesh point is really weak, way worse than the main router even in the same room.
- upgraded to gigabit internet but my alien router speed tests on the app never go above 500-600 mbps wired.
- i keep getting 'device isolation alert' on my phone from the amplifi app and some gadgets can't talk to each other.
- my internet is fine but the alien's light ring stays solid red all the time and won't turn blue.
- the touchscreen on my alien router is completely unresponsive, i can't swipe or tap anything.
- just got an alien mesh point and it won't pair to my main router, the light just flashes white forever.
- my amplifi alien keeps rebooting on its own every couple hours, the light ring just goes out and then starts back up.
- the remote for my u7k is super laggy or doesn't work unless i'm pointing it right at the tv.
- my ps5 says it's not getting a 4k 120hz signal from the hisense u7k, even though the hdmi is set to enhanced.
- the motion on my hisense looks weird and jittery during sports, even with motion smoothing turned on.
- how do i clean the screen on this hisense mini-led tv? the microfiber cloth just smears it.
- there's a weird high-pitched buzzing or whining sound coming from the back of my u7k, only when the screen is bright.
- my hisense tv keeps disconnecting from wifi every few hours, have to reboot to get it back.
- the google tv home screen on my 65u7k is super laggy and unresponsive, takes forever to load apps.
- my hisense u7k won't turn on at all, just a black screen but i can hear a click from the power supply when i press the button.
- the live view on my wyze cam is super laggy and choppy, sometimes it just says 'loading video' forever
- my wyze cam won't record events even though it detects motion, the timeline is empty
- how do i clean the outside of my wyze cam? the lens looks smudged but i don't wanna break it
- the night vision on my pan v3 is really grainy and almost green looking, not clear black and white
- my wyze cam pan v3 makes a loud humming or grinding noise when it moves, it's new
- i get a solid yellow light on my wyze cam and it won't show up in the app, what do i do?
- why does my wyze cam keep disconnecting from wifi every few hours? i have to keep resetting it
- my wyze cam pan v3 is stuck upside down and won't rotate, it's just frozen in place
- the remote for my heater doesn't work unless i'm right next to it, or it's totally dead
- the digital display on my lasko tower heater is dim or has segments missing
- my heater keeps shutting off by itself after running for a little while, the power light is still on
- the oscillation on my heater stopped working, it just points in one direction now
- how do i clean my lasko ceramic heater? the manual says to clean it but i can't figure out how to get inside
- lasko tower heater making a loud clicking or popping noise when it first turns on or off
- my tower heater fan runs but it won't put out any heat, just blows cold air
- my lasko ceramic tower heater just stopped working, no lights, no fan, nothing when i plug it in
- the cable management tray underneath is sagging in the middle, can i tighten it?
- the desk goes up but then immediately goes back down a little bit on its own when i stop.
- i'm trying to put my desk together and the threaded inserts in the wood top keep spinning when i try to tighten the bolt.
- how do i clean the white laminate top without ruining it? i got a coffee stain.
- the desk wobbles side to side a lot when i type, especially at standing height.
- the memory presets on my handset got wiped after a power outage, how do i reset them?
- my desk makes a loud clicking or grinding noise on one side when it goes down but not up.
- my uplift v2 desk is stuck and won't move up or down at all, the display is just blank.
- is it normal for this pressure washer to get really hot and smell kinda like hot plastic after 15 minutes of use?
- the wand extension on my gpw1501 is stuck and i can't get it off to change the spray tip, it's really jammed on there.
- the soap injector isn't sucking any detergent out of the bottle on my 1500 psi greenworks.
- why does my pressure washer leak a steady drip of water from the bottom of the pump when it's just sitting turned off?
- my greenworks pressure washer turns on for a second then immediately shuts off, the light goes out.
- how do you get the pump to prime on this thing? i followed the instructions but it just pulses and sputters.
- the pressure on my gpw1501 is super weak, like it's barely spraying out, even on the 0 degree tip.
- my greenworks 1500 psi pressure washer just hums when i pull the trigger and the pump won't engage, what gives?
- there's a burning smell coming from my lg dryer, not like lint, more like hot plastic or rubber.
- the control panel on my dlex7900we is totally dead, no lights, nothing. but i hear a click when i press power.
- my lg dryer is taking forever to dry a normal load, like over two hours. it's not throwing an error.
- how do i clean the moisture sensor strips in my lg dryer? my clothes are still damp saying it's done.
- the wifi on my lg smart dryer keeps disconnecting and i can't control it from my phone anymore.
- lg dryer dlex7900we just beeps three times and won't turn on when i press start, what gives?
- why is my smart lg dryer so loud? it makes a loud thumping or banging noise during the cycle.
- my lg dlex7900we dryer keeps showing OE error and won't start a cycle, what's wrong?
- after a power outage, my atlas max nodes are all on but the wifi network name is gone and i can't connect.
- the parental controls or device pause in the linksys app just stopped working, the timers don't cut off the internet.
- my device keeps disconnecting from the wifi or switching to a weak node even when i'm right next to a stronger one.
- how do i port forward on the atlas max 6e? i can't find the setting anywhere in the app.
- one of my atlas max nodes is making a faint but annoying high-pitched whining or buzzing sound, is it broken?
- why is my wifi speed so much slower than my internet plan on the atlas max 6e, especially on my phone?
- setting up my new atlas max 6e and the app just keeps saying 'unable to connect to the internet' even though my modem works fine
- my linksys atlas max 6e router just has a solid red light on one of the nodes and my wifi is gone, what do i do?
- the screen is black but i can hear sound and the standby light is white, did my x90l just die?
- my tv keeps switching to the wrong input by itself, like it will jump back to live tv while i'm watching my apple tv
- i can't get the 'always on' voice feature to work, it just says microphone off when i say 'hey google'
- the screen on my x90l looks weird and washed out when i play hdr content from my playstation 5
- my sony tv remote just stopped controlling the volume and power for my soundbar even though it worked before
- how do i get the google assistant button to stop popping up on the bottom of the screen every time i pause my show
- the back of my xr65x90l makes a faint buzzing or humming sound, it's not the speakers, is this normal?
- my new sony x90l tv keeps saying 'no signal' when i turn it on with my soundbar plugged into the hdmi earc port
- the live feed in the app is super delayed, like 10-15 seconds behind real life, is that normal?
- trying to set up my new nest cam and the app just won't find the device, it keeps searching forever.
- why does my nest cam keep recording when nothing is moving? it's filling up my nest aware history with useless clips.
- i get a notification that says 'camera is offline due to poor power connection' but the cable is plugged in tight.
- the camera makes a constant quiet buzzing or clicking sound, it's not loud but it's annoying in a quiet room.
- my nest cam's video looks super grainy and blurry at night even though the night vision is on.
- the status light on my indoor nest cam is solid yellow and won't go green, what does that mean?
- my nest cam keeps going offline in the app, it's plugged in and the light is on but it says it's offline.
- the display says my humidity is 35% but my other hygrometer says 60%, which one is right?
- the fan on this thing is way louder than i expected, it's like a constant whooshing roar, is it broken?
- my cube is making a loud gurgling or bubbling noise, like water is running through pipes, is that normal?
- the continuous drain hose setup is leaking where it connects to the cube, water is dripping down the side.
- how do you clean the filter on this cube dehumidifier? i can't figure out how to get the back panel off.
- it's running but not pulling any water out of the air, the bucket is bone dry after a whole day.
- just got this cube thing and the app won't connect no matter what i do, it keeps saying connection failed.
- my midea cube dehumidifier is flashing E1 and just beeping at me, what does that mean?
- i'm getting a burning electrical smell from my flexispot e7 motor, what should i do?
- the up and down buttons on the keypad work but the m and number buttons don't do anything
- my desk is wobbly at standing height, especially when i type. did i build it wrong?
- the memory height settings on my e7 just randomly forgot and reset to factory default
- how do you clean the white laminate top without streaks or damaging it? mine looks awful
- my desk keeps stopping and beeping three times after moving only a couple inches
- i assembled my e7 but it won't turn on at all, no lights on the control panel, nothing
- my flexispot e7 desk just started making this loud clicking or grinding noise when it goes up but not down
- the trigger on my spray gun is stuck or really hard to squeeze, is there a way to fix it without buying a new one
- how do i get my pressure washer to start after winter storage, it was working when i put it away
- my sun joe makes a horrible knocking or rattling sound when it's running, sounds like it's coming from the pump
- the soap dispenser on my spx3000 isn't pulling any detergent, it just sprays plain water
- my pressure washer runs fine but has barely any pressure coming out of the wand, it's just a trickle
- the spray wand on my sun joe pressure washer leaks badly right where it connects to the hose, even with a new o-ring
- why does my spx3000 keep tripping the gfci outlet every time i try to use it
- my sun joe spx3000 pressure washer turns on but the motor just hums and won't pump any water
- getting a dE error code on my samsung dryer, can't get it to go away.
- how do i clean the moisture sensor strips inside the drum? my dryer keeps stopping early saying clothes are dry when they're not.
- the control panel on my samsung dryer is completely dead, no lights, no response, but i hear a hum.
- clothes are still damp after a normal cycle, takes two runs to dry anything.
- dryer makes a loud scraping or squealing noise, only when the drum is turning.
- the steam function on my samsung dryer isn't doing anything, clothes come out just as wrinkled.
- my dve45b6300w shows a tE error and just stops mid-cycle, what does that mean?
- my samsung dryer just beeps three times and won't start at all, what's going on?
- trying to connect my pro iii to the app for smart recipes but it won't find the device
- cosori makes a loud rattling or grinding noise when the fan is on, sounds bad
- the nonstick coating on my basket is peeling and flaking off after a few months, is that safe?
- my fries are coming out soggy not crispy in the new cosori, am i doing something wrong?
- cosori pro iii screen says 'E1' or 'E2' when i try to start it, what does that mean?
- air fryer shuts off by itself mid-cycle with a burning smell, no error code
- the basket on my 5.8qt cosori pro is stuck and i can't get it out, handle feels jammed
- my cosori pro iii just flashes all the lights and beeps constantly when i plug it in, won't let me do anything
- can i grind coffee beans in my vitamix 5200? i don't want to wreck it
- i just got a refurbished 5200 and it's crazy loud, like a jet engine, is this normal?
- the variable speed dial on my 5200 feels loose and sometimes it just turns off on its own
- my vitamix 5200 is leaking from the bottom of the container, around the blades. is it broken?
- the lid for my vitamix 5200 is impossibly hard to get on and off, am i doing it wrong?
- how do you get the smell of garlic or onion out of the plastic container? i've washed it a dozen times
- why does my vitamix 5200 smell like burning rubber or electronics when i run it?
- my vitamix 5200 just hums and the blades won't spin, it's like it's stuck
- connected my macbook via usb-c but it's not charging, just showing the screen, what's up?
- the joystick button on the back is super hard to press and the menu keeps going the wrong way, am i using it wrong?
- there's a weird high-pitched buzzing or coil whine coming from the back, is it gonna explode?
- i hooked up my ps5 to the hdmi port but it's only showing 60hz, not 120, what gives?
- how do i clean the screen on this thing? i'm scared of ruining the coating.
- the monitor won't turn on at all, the power button just flashes, what do i do?
- just got this 27ul500 and the colors look washed out and terrible compared to my old monitor, did i get a bad one?
- my lg 27ul500 screen goes black for a second every few minutes, it's driving me nuts, what's wrong with it?
- the touchscreen on my ecobee gets super sluggish and unresponsive, especially in winter.
- my ecobee enhanced keeps switching to 'aux heat' even when it's not that cold out, running up my bill.
- i got an alert about 'high humidity in equipment' on my ecobee, what does that mean?
- why is my ecobee making a faint but annoying clicking sound every few minutes?
- my ecobee thermostat is offline in the app every day or two, have to reboot it to get wifi back.
- the room sensor for my ecobee enhanced says 'unoccupied' even when i'm sitting right in front of it.
- ecobee keeps saying 'recovery in progress' and my house is too hot/cold at the scheduled time.
- my new ecobee enhanced won’t turn on at all after i wired it up, screen is just blank.
- the clock on my microwave keeps resetting to 12:00 every time i turn the kitchen light off.
- i get a burning plastic smell when i use the vent fan on my ge jvm6175, is that normal?
- the vent fan on this microwave is way louder than it used to be, sounds like a rattle.
- the turntable in my ge microwave spins for a second then stops, food heats unevenly.
- how do you clean the grease filter on this ge microwave? it seems stuck and i can't get it out.
- this microwave makes a loud humming or buzzing noise when it's running, but it still heats food.
- the light and fan come on but my ge over-the-range microwave won't start cooking at all, no buttons work.
- my ge jvm6175 microwave just shows F0 on the display and won’t heat anything, what does that mean?
- how do you clean the inside of this thing? sawdust is packed everywhere under the table and in the mechanism
- battery drains crazy fast on my m18 table saw, like one 8.0 HO only gets me a few cuts in 2x4
- fence on my milwaukee won't stay square to the blade, it drifts when i lock it down
- saw won't start at all, i press the trigger and get nothing, no light, no sound, with a full battery
- dust port on my m18 saw keeps popping off mid-cut, it's super annoying and makes a huge mess
- my milwaukee table saw is making a horrible grinding noise when it starts up, sounds like metal on metal
- the blade on my 2736-20 won't go all the way down to 0 degrees, it stops about a degree or two above the table
- my milwaukee m18 fuel table saw just quit in the middle of a cut and now the light blinks red and green
- the volume on my ray is way out of sync with my tv remote, like i have to crank it to 50 just to hear a conversation.
- can i clean the fabric grille on my ray? it's getting dusty and i'm scared to ruin it.
- my ray is making a faint static or hissing sound when it's on but not playing anything, is that normal?
- the white light on my ray is just solid white and it won't respond to anything, the app says it's disconnected.
- i'm trying to set up my new ray but the sonos app just won't find it, it's stuck on 'searching for products'.</p>
- the sound from my ray sounds really tinny and hollow, like it's coming from a tunnel, no bass at all.
- sonos ray keeps randomly disconnecting from wifi and i have to unplug it to get it back, super annoying.
- my sonos ray is connected to my tv with optical but there's no sound at all, tv audio is still coming from the tv speakers.
- my garage door opener just hums loudly when i press the button but the door doesn't move at all
- how do i clear all the old remotes and keypads from my chamberlain opener and start fresh?
- the remote for my b2405 works from like right underneath it but not from my car in the driveway anymore
- the door only opens or closes like a foot then stops and reverses, i already checked the sensors and they're clear
- i can't get my chamberlain smart opener to connect to wifi for the app, it just keeps failing
- my garage door opener makes a horrible grinding noise but only when it's going up, going down is fine
- the lights on my b2405 flash 10 times and the door won't open or close, what's that code mean?
- my chamberlain smart garage door opener just beeps three times when i try to use the remote or wall button and the door won’t move
- the chuck on my craftsman cmcd710 keeps coming loose while i'm drilling. how do i tighten it properly?
- craftsman cmcd710 drill feels super weak, like it has no power. what's wrong?
- can i charge a different brand 20v battery with my dewalt charger? it looks like it fits.
- can i use my dewalt 20v charger outdoors? it's drizzling a bit.
- how do i change the drill bit on my avid power 3/8 keyless chuck? it's stuck.
- avid power 3/8 drill chuck keeps loosening while i'm drilling, super annoying. how do i fix this?
- how do i change the direction on my dekopro drill to take out a screw?
- the little light on my dekopro drill won't turn on when i pull the trigger, is it broken?
- i'm getting a ton of kickback from my dekopro drill when driving screws, feels dangerous. what am i doing wrong?
- how do i change the drill bit on my dekopro cordless drill? i can't get it to tighten right.
- avid power drill chuck is wobbly, bit doesn't stay straight. how do i fix this?
- how do i clean my frigidaire ice maker? the manual is gone.
- how do i change my milwaukee drill from drill mode to screwdriver mode?
- i just got a gowise gw22956 and it smells like burning plastic the first time i used it, did i get a defective one?
- the basket for my gowise air fryer won't slide in smoothly, it gets stuck. help?
- how do i clean the inside of my breville bambino plus? it says to do a cleaning cycle.
- breville bambino plus espresso runs out way too fast and tastes watery. what am i doing wrong?
- my ge profile portable dishwasher seems wobbly and unstable, is that normal?
- the ice tastes weird, kind of plastic-y or stale, even after cleaning. how do i fix the taste?
- water is leaking out from the bottom of the unit onto my counter, not a lot but it's constant.
- i just got it and followed the steps but the power button does nothing, no lights, completely dead.
- the ice maker turns on, makes noise, but no ice ever drops into the basket. where's it going?
- how do you clean this thing? the manual is vague and i don't want to break it.
- it's making a loud gurgling or buzzing noise that wasn't there before, sounds like it's struggling.
- ice cubes are coming out really thin and hollow, like shells, and they melt super fast. how do i get solid cubes?
- my free village ice maker just keeps flashing the red light and won't start a cycle, what's it trying to tell me?
- the ice tastes weird, kinda plastic-y or like the cleaner, even after running it a few times
- the power light comes on but when i press any other button nothing happens, machine is totally unresponsive
- it takes forever to make ice now, like 20 minutes for a few cubes, used to be much faster
- my newair portable ice maker is leaking water out of the bottom onto my counter, what gives?
- how do you clean the inside of this thing? the manual says to run a cleaning cycle but i don't see a button for that
- ice maker is running constantly but not making any ice, just a humming sound and the light is on
- why is my newair ai-100ss making tiny, thin ice cubes instead of the thick ones it used to make?
- my newair ice maker says 'add water' but the tank is already full, it just keeps blinking and won't start making ice
- a weird grinding noise comes from the base when i use it, not from the jar. sounds like gears stripping.
- the blender jar is cloudy and scratched after a few months, can i still use it or is it unsafe?
- how do you get the smell out of the lid? i washed it but it still smells like garlic or protein powder.
- my blender seems weak, it struggles with ice and frozen fruit that my old cheap one handled fine.
- the pulse button on my hurricane pro feels sticky and sometimes it stays engaged after i let go.
- why does my cbt-2000 blender leak from the bottom every time i make a smoothie? it's a mess.
- my cuisinart hurricane pro blender just makes a loud humming noise but the blade won't spin at all, what's wrong?
- just got this drill and the battery seems to die way faster than my old m18 drill, is something wrong with it?
- my drill works but the led worklight doesn't come on anymore, is there a way to check it without taking it all apart?
- i dropped my drill and now the trigger is all loose and sometimes it just starts running on its own, can i fix this?
- the mode selector ring between drill, hammer, and screwdriver is stuck and i can't turn it, how do i free it up?
- why does my m18 fuel drill get super hot right behind the chuck after like 5 minutes of use, even on easy stuff?
- my milwaukee hammer drill makes a horrible grinding noise only when i push the hammer mode button, drilling is fine
- the chuck on my m18 fuel hammer drill won't tighten all the way, bit just slips no matter what
- my milwaukee m18 fuel hammer drill just flashes red and green on the battery and won't run at all, what's wrong?
- all the usb ports on the side of the monitor stopped working after i updated my computer.
- the screen has a weird yellow or red tint on one side but not the other, especially on gray backgrounds.
- the joystick controller on the back feels weird and the menu sometimes pops up randomly, is it broken?
- i'm trying to use the usb-c port to connect my macbook but it's not charging or showing a picture.
- how do i clean the screen on this thing? the microfiber cloth that came with it just smears the fingerprints.
- the monitor makes a faint but annoying high-pitched buzzing or whining sound, is it defective?
- the colors on my pa278qv look way off and washed out compared to my old monitor, did i get a bad panel?
- my new asus proart monitor is stuck on a blue screen that says ‘no signal’ even though my pc is on and plugged in, what gives?
- my wyze thermostat makes a quiet but annoying clicking sound every few minutes, is that normal?
- i'm getting an 'e1' error on my wyze thermostat and the heat won't come on, what does that mean?
- the temperature reading on my wyze thermostat seems way off, it says 72 but the room feels freezing.
- how do i get the schedule on my wyze thermostat to actually work? i set it up but the temperature doesn't change when it's supposed to.
- wyze thermostat keeps rebooting on its own, the screen flashes and it goes through the startup animation randomly.
- installed my wyze thermostat and now the heat won't turn off, it just runs constantly, what did i do wrong?
- why does my wyze thermostat keep saying it's offline in the app even though my wifi is fine?
- my wyze thermostat screen just went blank and won't turn back on, no lights or anything, is it dead?
- the orbi app says my firmware update failed and now my system is acting weird.
- how do i factory reset this thing? i lost the admin password and the app won't let me in.
- the internet speed from my satellite is way slower than from the main router, like half or less.
- after a power outage, my orbi router has a solid amber light and no internet.
- i can't get the 6ghz band to show up on my new samsung phone even though it supports wifi 6e.
- the satellite keeps making a faint clicking or buzzing noise, it's not loud but it's in my bedroom and it's annoying.
- my orbi 6e system keeps dropping devices, especially my phones and smart home stuff, every few hours.
- my brand new orbi 963 just has a solid magenta light on the satellite, internet says it's offline.
- after a power outage, my router's guest network passwords all reset and the settings look weird.
- i can't get the built-in vpn fusion to work, my traffic just doesn't go through the vpn.
- the router keeps dropping my wired connection to my pc, the port light goes out for a second.
- my internet speed is way slower over wifi than what i get plugged directly into the router.
- how do i get the rgb lighting on the front to just stay off? it's too bright for my living room.
- why is my gt-ax6000 making a high-pitched electrical whining or coil whine noise? it's really annoying.
- the 5ghz wifi network from my asus router just disappears randomly and i have to reboot to get it back.
- my new gt-ax6000 router just has a solid red led and i can't get to the setup page at all.
- the printer says 'out of paper' when the tray is clearly full, it just won't pick up any sheets.
- my canon pixma ts3520 is making a loud, rhythmic grinding or clicking noise when it prints, sounds terrible.
- the paper keeps getting jammed halfway through when i try to print, it's all wrinkled and crooked.
- i'm trying to scan from my ts3520 to my computer but the canon app just says 'cannot communicate with scanner'.
- my canon printer's power light is just blinking orange and it won't do anything at all, no noise, no nothing.
- the black ink on my canon pixma ts3520 is printing really faint and streaky, even though the cartridge says it's full.
- just got a ts3520 and it won't connect to my wifi during setup, it just keeps searching and failing.
- my canon ts3520 printer keeps showing 'error 5100' and won't print anything, just makes a grinding noise.
- the printed pages from my hp all-in-one come out with black smudges or smears all over them, what's causing that?
- setup keeps failing saying my hp deskjet 4155e is offline even though it's on and connected to wifi.
- i replaced the ink in my deskjet 4155 but the app still says the cartridges are empty or not recognized.
- why does my printer keep saying 'out of paper' when the tray is clearly full? it's driving me nuts.
- the scanner on my 4155e makes a loud grinding noise and won't move when i try to copy something.
- my hp deskjet prints super faded or has streaks even with new cartridges, is it clogged?
- how do i connect my hp 4155e to wifi without using the cable? it never finds my network during setup.
- my hp deskjet 4155e printer just shows a flashing power light and won't do anything when i try to print, what's wrong?
- the knob on my breville feels super loose and wobbly, it still works but i'm worried it'll break off
- my oven just beeps three times and shuts off in the middle of cooking, power light is still on
- is it normal for the door to feel really hot to the touch during air fry mode? the handle gets almost too hot to hold
- the element guard thing on the top of my oven is covered in black gunk and smoke comes off it, how do i clean it
- my smart oven air fryer pro won't connect to the app no matter what i try, it just times out
- how do you clean the mesh air fryer basket on this thing? food is welded on and it's impossible to scrub
- the oven display just shows "Err" and won't heat up, i tried turning it off and on
- my breville air fryer pro just started making this loud rattling noise from the fan, it sounds like something's loose in there
- how do i clean the inside tube where the water comes out? mine has gross brown buildup and i'm scared to break it.
- my precision brewer thermal's hot plate won't turn off after brewing into the glass carafe, it just stays on.
- i can't get the 'my brew' settings to save on my precision brewer. i set them, but it just reverts back.
- the clock on my BDC455BSS resets to 1:00 every time i unplug it, even for a second. is the battery dead?
- why is my precision brewer thermal coffee always weak and under-extracted even on the strongest setting?
- the thermal carafe on my precision brewer leaks coffee from the bottom seam, is there a fix or do i need a new one?
- breville precision brewer thermal making a loud gurgling noise like it's struggling to pump water, is it broken?
- my breville precision brewer thermal just shows the triangle with the exclamation point and won't start brewing, what do i do?
- clothes are coming out sopping wet after spin, way wetter than they used to
- it won't power on at all, no lights, nothing. checked the outlet and it's fine.
- the washer is walking across the floor and banging loudly on spin
- water won't drain out at the end of the cycle, just sits in the tub
- getting a suds error every time i use even a tiny bit of detergent, what gives?
- it fills with water but then just sits there and doesn't agitate or spin, hums a little
- washer is making a loud grinding noise during the spin cycle, sounds like metal on metal
- my maytag mvw7230hw just shows F9 E1 and won't start a load, what is that?
- the side brush on one side just doesn't spin anymore on my x1, everything else seems to work fine.
- my deebot keeps losing its map overnight and wants to start a new one every morning, it's driving me nuts.
- the self-cleaning mop feature isn't working, the station just makes a humming noise and the pads stay dirty.
- i can't get my new x1 omni to connect to wifi, it just times out during setup in the app.
- robot keeps getting stuck on a low-pile rug saying 'main brush blocked' but the brush spins free when i check it.
- my x1 omni's mop pads are barely damp and aren't cleaning the floor, they just smear dirt around.
- the auto-empty station on my x1 omni is super loud and sounds like it's straining, but no dirt is coming out into the bag.
- my deebot x1 omni just keeps spinning in circles saying 'lidar error' and won't map my house at all, what's wrong?
- the knob on my q1200 is super stiff and hard to turn, feels like it's going to break
- my weber q's grease tray overflows every time i cook burgers, it's a huge mess
- i get a big flash of fire up the front of the grill sometimes when i light it, is that normal?
- the plastic table on my q1200 is warping and sagging in the middle, is it gonna melt?
- how do you clean the inside of a q1200 lid? it's got this baked-on black stuff that won't scrub off
- my portable weber grill flame is really yellow and uneven, sometimes it even blows out
- the igniter on my weber q just clicks but won't light, i have to use a lighter every time
- my q1200 won't get hot anymore, it just stays lukewarm even on high after 10 minutes
- i get almost no smoke flavor on my food, even on the smoke setting. what am i doing wrong?
- my traeger pro 575 won't get above 300 degrees even when i set it to high, it just sits around 280.
- the auger on my grill is making a loud clicking or grinding noise and won't feed pellets.
- there's a big temperature swing on my pro 575, it'll be 50 degrees over or under what i set it to.
- my traeger won't connect to wifi no matter what i try, the app just keeps searching.
- the fan on my pro 575 is crazy loud and sounds like it's rattling, is it broken?
- my traeger keeps shutting off in the middle of a long smoke, pellets are full, why is it doing this?
- my traeger pro 575 just shows 'err' on the controller and won't start up, what do i do?
- there’s a burning smell coming from my lasko fan when it runs, not just dust.
- my fan’s timer doesn’t shut it off, it just runs all night no matter what i set.
- the remote for my lasko 2511 stopped working, i changed the batteries but no luck.
- the fan wobbles a lot on its base even on a flat floor, feels really unstable.
- my tower fan turns on but only works on the high setting, the low and medium buttons do nothing.
- how do you clean the dust out of a lasko tower fan? the grill looks impossible to open.
- why does my lasko 2511 fan make a loud clicking or grinding noise when it oscillates?
- my lasko tower fan just stopped working, no lights, no response to any button, what gives?
- it's draining water out the back constantly onto my floor, isn't it supposed to evaporate?
- remote worked now it doesn't, changed batteries and everything.
- how do i clean the inside of this thing? the filter is clean but it smells musty.
- my midea ac turns on and the fan works but it's not blowing cold air at all.
- the water tank full light came on but the tank is empty, how do i reset it?
- why is my portable midea so loud on cool mode, it sounds like a lawnmower sometimes?
- just set up my new midea portable ac and the hose connection feels super loose, is it gonna leak?
- my midea portable ac keeps flashing e2 and shutting off, what does that mean?
- dolby atmos audio cuts out or sounds crackly on my homepods connected to the apple tv
- apple tv won't turn on my tv or control the volume with the remote anymore, hdmi-cec just stopped
- how do i get rid of the annoying 'storage almost full' warning? i hardly have anything on it
- the remote is laggy and delayed, especially when scrolling through menus
- getting a black screen or 'no signal' but i can hear audio from the apple tv
- why does my apple tv 4k get so hot to the touch, is that normal?
- apple tv 4k keeps saying 'cannot connect to network' or losing wifi over and over
- my new apple tv 4k remote just won't pair or connect at all, it's totally unresponsive
- the sleep sensing on my nest hub stopped working, it just says 'not enough info' every morning now.
- my hub keeps disconnecting from wifi every day or two, have to reboot it to get it back online.
- the touchscreen on my hub is getting really laggy and unresponsive, have to tap things multiple times.
- nest hub won't play youtube videos anymore, just says 'something went wrong' or spins forever.
- how do you clean the fabric speaker part on the nest hub without wrecking it? it's getting dusty.
- why does my google nest hub make a faint high pitched buzzing or whining noise when it's just sitting there?
- set up my new nest hub and it's stuck on 'checking for updates' for over an hour, how do i get past this?
- my nest hub gen 2 screen just went completely black, but it still responds to touch and voice, what gives?
- the display is showing 'CH' or 'dH' and beeping, and it won't run. what does that mean?
- my dehumidifier suddenly turned off and now it won't turn back on at all, no lights, nothing.
- how do you clean this thing? the manual is confusing about the actual coils and stuff inside.
- the fan on my lg 50-pint is running but no water is collecting in the bucket, it's been days.
- trying to connect my puricare dehumidifier to the lg app but it won't find the device during setup.
- my ud501k says 'full' on the display and shuts off but the bucket is only half full, what's going on?
- got an LG 50-pint and it's making a loud gurgling or water-sloshing noise, like there's a bucket inside it. is that normal?
- my lg dehumidifier just flashes the red filter light even though i cleaned the filter, how do i make it stop?
- the lights and display work but the fan and compressor won't start on my ffad5033w1, it's completely silent.
- water is leaking from the bottom of my dehumidifier, not from the bucket but from the actual base onto the floor.
- my frigidaire dehumidifier turns on for a minute then shuts off by itself, the compressor never even kicks in.
- how do i clean the filter on this ffad5033w1? i can't figure out how to get to it.
- the fan on my frigidaire dehumidifier is super loud all of a sudden, sounds like a grinding or rattling noise.
- i just got this frigidaire ffad5033w1 and the bucket light is red and beeping even though the bucket is empty and clicked in place.
- my frigidaire 50 pint dehumidifier is running constantly but the bucket never fills up, it's like it's not pulling any water out of the air.
- my frigidaire dehumidifier ffad5033w1 just shows a flashing 'pf' on the display and won't do anything else, what does that mean?
- my garage door opener's battery backup beeps nonstop every few hours, even when the power is on.
- why does my garage door only open like a foot when i use the app, but works fine from the wall button?
- the light on my chamberlain opener won't turn off automatically, it just stays on for hours after i close the door.
- i can't get myQ to work with alexa anymore, it just says device isn't responding even though the app works fine.
- the travel limits seem to reset on their own on my smart garage door opener, it closes too far and then reverses.
- my chamberlain opener makes a loud grinding noise when it starts to close but then it runs smooth, only happens sometimes.
- the wall control panel for my b6765t just shows two dashes -- and the remote won't work either, but the lights on the motor unit are on.
- my chamberlain smart garage door opener just flashes the yellow light and won't connect to my wifi, i've tried a bunch of times.
- can't get the two-way audio to work on my c200, i can hear but they can't hear me, mic must be busted.
- my tapo camera keeps disconnecting from the app when i try to watch the live feed, just spins and then fails.
- the motion detection on my camera is going crazy, sending me alerts all day for just shadows or nothing.
- how do i clean the lens on this thing without scratching it? it's got smudges and looks foggy.
- the night vision on my c200 is really grainy and almost useless, just a blurry black and white mess.
- camera says 'offline' in the tapo app but the light is on solid blue. how do i get it back online?
- why does my pan tilt camera make a loud grinding or clicking noise when it moves? sounds broken.
- my tapo c200 camera just won't connect to the wifi no matter what i try, keeps failing during setup.
- nest cam outdoor just shows a black screen in the app, but i can hear sound and it's online
- the person detection on my outdoor cam is awful, it alerts me for every car and shadow
- my camera's night vision looks terrible now, it's all washed out with bright white spots
- how do i clean the spider webs off my outdoor nest cam without triggering motion alerts every two seconds
- water got inside the lens of my outdoor camera, now the video is all foggy and blurry
- nest cam outdoor wired won't connect to wifi during setup, just keeps spinning and failing
- why is my outdoor nest cam making a constant humming or buzzing sound? it's not the fan, it's like an electrical buzz
- my nest outdoor cam keeps going offline and coming back online every few minutes, it's driving me nuts
- the soundbar gets really hot on the top right side, is that normal or should i be worried?
- my voice sounds muffled during calls using the soundbar's bluetooth from my phone, people say i'm hard to hear.
- soundbar display says 'unsupported audio' when i play something from my apple tv or ps5. how do i fix it?
- the subwoofer for my ht-a7000 keeps disconnecting, the light blinks red. i have to unplug it to get it back.
- how do i get my soundbar to connect to wifi again? it just says connection failed and won't see my network.
- my a7000 makes a loud pop or crackle sound sometimes, especially when starting a new movie or pausing. is it broken?
- why is there no sound coming from my ht-a7000 when my tv is on? the display lights up but it's silent.
- my sony ht-a7000 soundbar keeps saying 'check speaker position' on the screen and the rear speakers keep cutting out, what's up with that?
- my soundbar 600 makes a faint popping or crackling noise sometimes, especially when starting or stopping audio
- the bose music app says 'product update failed' every time for my soundbar 600, stuck on old software
- there's a noticeable audio delay or lip sync issue with my bose 600 when watching tv, sound is behind the picture
- my soundbar 600 won't turn on with my tv remote using hdmi-cec anymore, it just stopped working
- how do i clean the fabric grille on the bose smart soundbar 600 without damaging it?
- bose 600 keeps randomly disconnecting from my wifi every day, have to reboot it to reconnect
- the voice dialogue on my bose 600 is super quiet but the music and effects are loud, how do i fix this?
- my new bose soundbar 600 has no sound at all, the lights are on but nothing comes out of it
- there's a high pitched buzzing sound coming from the back of my fire tv, it's really annoying
- my fire tv won't connect to wifi anymore, it just says 'unable to connect' every time
- how do i clean the screen on this omni qled without ruining it? the cloth it came with is lost
- the screen on my omni tv looks weird and washed out, like the colors are all faded and grayish
- my fire tv remote won't control the volume on the tv anymore, only the fire stick itself
- why is my omni qled tv so slow and laggy, menus take forever to load
- fire tv omni keeps restarting over and over, gets to the logo screen then loops
- my fire tv omni qled screen is black but i can hear the sound, it’s like it’s on but showing nothing
- when i switch to game mode on my ps5, the screen gets noticeably darker and washed out.
- the tv turns on by itself in the middle of the night. it's creepy and wasting energy.
- how do you clean the screen on this thing without messing up the coating? it's a dust magnet.
- my samsung tv remote (the solar one) is super laggy or not working unless i'm right next to the tv.
- the motion smoothing on my qn85c is awful and makes everything look weird, how do i kill it for good?
- why does my samsung qled keep disconnecting from wifi every few hours? have to reboot to get it back.
- just got my qn85c mounted and the one connect box is getting super hot to the touch, is that normal?
- my new samsung qn85c is showing a weird grid of colored lines or blocks on the screen, it's not the source.
- all my hdmi ports stopped working at the same time, no signal on any of them.
- getting a weird buzzing sound from the back of the tv, not the speakers, it's a constant electric hum.
- the remote (solarcell one) that came with the tv is super laggy and unresponsive.
- how do i clean the screen on this qled without ruining the coating? it's got a weird matte finish.
- my sound keeps cutting in and out when using the built-in speakers, especially with dialogue.
- screen looks dim and washed out no matter what i do with the picture settings on my qn55q80c.
- the tv keeps saying "network disconnected" but my wifi is fine and every other device works.
- my new samsung q80c won't turn on, just a red light on the bottom and nothing else, tried unplugging.
- the clock on my whirlpool microwave resets to 12:00 every time i have a power flicker.
- there's a loud humming or buzzing noise when my microwave runs, but it still heats food.
- how do i get the charcoal filter out of this thing to replace it? i can't find any latch.
- the touchpad on my over-the-range microwave is completely unresponsive, none of the buttons work.
- my whirlpool microwave keeps tripping the circuit breaker in my kitchen when i use it.
- the light under my microwave won't turn on with the touchpad buttons, but the microwave works fine.
- the fan on my whirlpool hood microwave comes on by itself and i can't turn it off, what gives?
- my whirlpool microwave just shows a flashing 'FF' code and won't start, what is that?
- door on my panasonic microwave won't close all the way unless i really slam it, latch feels sticky
- the clock on my microwave keeps resetting to 0:00 every time there's a brief power flicker
- panasonic microwave makes a loud humming or buzzing noise the whole time it's running, not just the fan
- the sensor cook on my nn-sn966s always overcooks my food, it's useless. what am i doing wrong?
- how do you clean the inside roof of this panasonic microwave? it has that brown splatter on the inverter thing
- the turntable in my panasonic microwave spins for a second then stops, makes a grinding noise
- panasonic nn-sn966s keeps tripping my kitchen gfci outlet every time i try to use it
- my panasonic inverter microwave just shows three zeros on the display and won't heat anything, what's wrong?
- the third rack on top keeps falling down when i pull out the bottom rack, how do i fix it
- i get an F1E2 error code on my kitchenaid dishwasher, what does that mean
- the heated dry on my dishwasher doesn't seem to work, everything is still soaking wet at the end
- my kitchenaid dishwasher won't drain, there's standing water in the bottom after a cycle
- the clean light on my kdtm404kps stays on all the time, even right after a cycle, is it broken
- why is my kitchenaid dishwasher so loud during the wash cycle, sounds like a grinding or rattling
- kitchenaid dishwasher leaving white chalky residue all over my glasses after a cycle
- my new kitchenaid dishwasher kdtm404kps won't start any cycle, just beeps at me when i press buttons
- the door on my bosch 300 is really hard to open after a cycle finishes, like there's suction holding it shut.
- dishes are coming out wet and sometimes still dirty, especially on the bottom rack. it's like the spray arm isn't spinning.
- my bosch displays an E:15 error code and stops mid-cycle. what does that mean and how do i fix it?
- just installed my bosch dishwasher and it won't turn on at all, no lights, nothing. checked the breaker and it's fine.
- the sanitize light never comes on at the end of a cycle on my bosch 300. does that mean it's not working?
- bosch dishwasher makes a loud grinding or rattling noise only during the drain cycle, sounds like it's coming from the bottom.
- why does my bosch dishwasher leave a white, powdery film on all my glasses and the inside of the door?
- my bosch 300 series dishwasher just beeps three times and won’t start, the start button is flashing. what’s wrong?
- the sleep mode on my mooka air purifier is too bright, how do i turn all the lights off?
- how do i clean the filter on my mooka air purifier? can i just wash it?
- i need to wall-mount my absolute ozone atlas, but the control panel is upside down. how do i flip it?
- my ozone generator's lcd screen keeps going black after a few minutes. is it broken?
- how do you clean the glass part in the air aroma aromax?
- how do i clean my puroair 240? can i just wipe it down with a damp cloth or some cleaner?
- puroair 240 filter change light is flashing red, but i just put a new filter in. how do i make it stop?
- how do i clean the filters on my winix 5510 air purifier? do i wash them?
- how do i clean the filters on my coway ap-1512hh? i don't want to break it.
- voopnu air purifier child lock is on and i can't turn it off, help!
- can i use my voopnu air purifier in the bathroom after a shower?
- how do i clean the sensor on my levoit air purifier? the manual says to do it but i can't find the opening.
- just installed my aquasana and the water tastes weird, is that normal?
- sceptre monitor colors look all wrong and washed out, hdmi cable is new, what gives?
- my sceptre e24 gaming monitor says no signal, power light is on but screen is black, anyone know what's up?
- brother 1360 printer keeps printing photos with white borders, how do i get it to print full page borderless?
- aquatru glass carafe system leaking water underneath, help?
- express water ro5dx making water slow, like a trickle, took forever to fill a glass. help?
- i think my cuzn filter is leaking from one of the connections, what should i do?
- ispring ro faucet is just a slow trickle even though the tank should be full, how do i get more pressure?
- just installed my ispring ro system and there's a leak where one of the plastic tubes goes into a fitting, how do i fix this?
- going on vacation for two weeks, can I just leave my bluevua water filter system plugged in?
- ispring rcc7ak-bn leaking at the tubing connection, how do i fix it?
- can my teenager use the ego lawn mower? what's the age requirement?
- how steep of a hill can i mow with my ego self propelled mower? i'm worried about tipping.
- i lost the paper with the number, how do i register my nutri bullet pro 900 for the warranty?
- how do i clean the blade on my nutri bullet pro 900? it's got gunk stuck underneath.
- food keeps burning on the bottom of my crock pot cook and carry even on low, am i doing something wrong?
- my crock pot cook and carry is taking forever to heat up, food is still cold after hours, what gives?
- powerxl air fryer pro 6qt showing an error code "POT" on the display, what does that mean?
- how often do i really need to clean the filter on my roomba i3+? it seems to clog fast.
- the handles on the side of my pressure cooker get way too hot to touch during use, is that supposed to happen?
- my food keeps burning on the bottom in this thing, even with plenty of liquid. am i not using it right?
- after pressure cooking, the float valve won't go back down even after it's cold, and the lid is still locked.
- how do you clean the stupid little anti-clog shield or float valve thing? it seems impossible to get all the gunk out of it.
- the float valve popped up but the weight on top never started rocking or jiggling, so i don't think it ever got to high pressure.
- it's making a loud, constant hissing sound from around the lid and steam is shooting out the sides, is this normal or is it dangerous?
- the lid on my pressure canner is stuck and i can't get it to unlock and open, it's completely cool now, help?
- my new 13 quart pressure cooker won't seal at all, the float valve just sits there and no pressure builds up, what am i doing wrong?
- water keeps leaking from under the lid of my presto canner when it's coming up to pressure, is that normal?
- i can't get the lid off my presto canner after it's cooled, the handle won't turn, feels locked solid
- my canner finally got to pressure but now the gauge is dropping even though the burner is still on high, what's wrong?
- the little rubber overpressure plug on my lid popped out and now it won't stay in, it just falls right through the hole
- how do you get the black stuff off the bottom of the presto canner pot? i've scrubbed and it's still stained
- the gauge on my presto pressure canner is stuck at 10 psi even when it's cold, can i still use it?
- the pressure regulator weight on my presto canner keeps rocking and spitting a lot of water, not a steady steam, is that right?
- my presto pressure canner won't come up to pressure, the weight just jiggles a little steam but the gauge never moves past zero
- it turns off by itself after like 10 seconds of blending, is that normal?
- the usb-c port feels loose and it's getting hard to charge
- mine leaks from the bottom every time i use it, it's a huge mess
- it just blinks a red light three times and won't start
- how do you clean the gasket under the blades? stuff always gets stuck there
- the battery life is terrible now, it dies after like one smoothie
- it's making a horrible grinding noise and smells like burning plastic when i try to blend
- my ninja blast won't turn on at all, the button does nothing even though i just charged it
- the dehydrate function doesn’t seem to work, my food stays soft and never dries out
- the timer button on my turbo fry is super stiff and sometimes doesn’t register a press
- chefman air fryer just shuts off mid-cycle, no error code, and the screen goes blank
- i can’t get the nonstick coating clean on my chefman basket, it looks stained and feels sticky
- why does food at the bottom of the basket burn before the top is even cooked in my 8qt chefman
- my chefman air fryer is making a loud whirring or grinding noise, sounds like it’s coming from the back
- the basket won’t slide into my turbo fry chefman, it feels like it’s hitting something
- my chefman 8qt air fryer beeps three times and won’t heat up, the screen just says ‘end’
- the plastic handle on top gets crazy hot while brewing, is there a way to fix that or do i just have to use an oven mitt every time?
- can i use this thing on a gas stove instead of the electric base? the base cord is really short.
- it makes a really loud gurgling sputtering noise at the end of the cycle, is that normal or is mine broken?
- a bunch of brown sludge leaked out from the bottom of the pot while it was brewing, all over my counter. what happened?
- my coffee comes out super weak and watery no matter how much coffee i put in the basket, using the 6-cup version.
- how do you clean the inside of this thing? coffee grounds and oily residue are stuck everywhere and it's starting to taste bitter.
- the red power light on my laoion 6-cup is on but it's not heating up at all, no noise, nothing. just got it yesterday.
- my new laoion moka pot won't make any coffee, it just hisses and spits steam out the top after like 10 minutes, what am i doing wrong?
- it's making a loud grinding or vibrating noise, way louder than the normal pump sound, only on the hot settings.
- the digital display is flickering or showing weird segments, and sometimes the buttons don't respond.
- the over ice setting just gives me hot coffee that melts all my ice, it's not actually brewing cooler.
- there's coffee grounds and water leaking out from the bottom of the machine, underneath the basket area.
- my ninja coffee maker just turned off by itself in the middle of brewing and now it won't turn back on at all.
- i can't get the cold brew to come out strong no matter what setting i use, it's always weak and watery.
- the machine says it's brewing but barely any coffee comes out, just a slow drip. it's not clogged, i checked.
- my ninja hot & iced xl just flashes the descale light nonstop, even after i ran vinegar through it twice. what else can i try?
- how do i clean the curved screen without damaging it? the microfiber cloth just smears it more.
- the monitor randomly goes black for a second or two then comes back, happens while gaming.
- i'm trying to wall mount this thing but the vesa pattern feels weird and the screws that came with my mount don't fit.
- the colors look really washed out and bad compared to my old monitor on the same pc.
- there's a weird high-pitched buzzing or coil whine coming from the back of my monitor, especially on dark screens.
- how do i get 144hz on this sceptre monitor? my windows settings only show 60hz as an option.
- the built-in speakers on my c248 are super quiet and sound tinny even at max volume.
- my sceptre curved monitor just has a black screen but the power light is on blue, no signal message or anything.
- the screen has these weird faint vertical lines or shadows, mostly on gray backgrounds, is my monitor defective?
- i have two computers but only one hdmi port on this monitor, do i really need to crawl behind and swap the cable every time?
- the joystick button thing under my samsung monitor is super sensitive and keeps opening the menu when i'm just trying to adjust the tilt
- there's a faint high pitched buzzing or whining noise coming from the back of my monitor, only when it's on
- the colors look really washed out and weird on my samsung monitor compared to my laptop, tried messing with settings but it's not right
- how do you even clean the screen on this samsung borderless monitor? i'm scared to touch it and leave marks on the edges
- the screen on my samsung borderless monitor keeps going black for a second and then coming back, happens randomly
- my new samsung 75hz monitor just says no signal when i turn on my pc, but the blue power light is on
- how do you refill the ink tanks on the g3270 without making a huge mess? it always seems to overflow.
- my printer's power light just blinks green and it won't respond to any buttons, it's just stuck.
- can't get the wireless direct to work on my g3270 for printing from my phone, it just times out.
- the colors on my prints look washed out and weird even though the ink tanks are full, how do i fix the print quality?
- my canon g3270 is making a loud grinding noise when it prints, like it's chewing on the paper.
- the scanner glass on my megatank gets these weird streaky smudges every time i clean it, how do you get it actually clean?
- just got a g3270, followed the setup but my computer and phone can't find it on wifi, what did i miss?
- my canon megatank g3270 printer says 'ink absorber full' and won't print anything, how do i clear it?
- i put in a new tape but it says 'no tape' on the screen, what am i doing wrong?
- my label maker just randomly disconnects from bluetooth in the middle of printing
- the app keeps crashing when i try to load icons or change fonts on my d30
- how do i get the cut line to actually be where i want it? it always cuts too much or too little
- the printed text is faded or has white lines through it, even with a new tape
- it’s making a loud grinding noise when it prints and the text is all messed up
- bluetooth just won’t connect to my phone, it keeps searching forever on the app
- my phomemo d30 won’t turn on at all, even after charging for hours, what gives?
- it’s vibrating a lot and making a humming noise that’s way louder than it used to be
- the light inside won’t turn off, it just stays on all the time even with the door closed
- the adjustable shelves keep sliding forward whenever i put tall bottles on them
- the glass door is constantly fogging up on the outside, it’s dripping water on my floor
- how do i clean the inside without ruining it? the manual is useless
- it’s making a loud gurgling or bubbling noise, like water running, is that normal?
- the digital control panel on my beverage fridge is completely dead, no lights or anything
- my manastin cooler is running but it’s not getting cold at all, just blowing room temp air
- water is pooling inside at the bottom even though i didn't spill anything, where is it coming from?
- the door doesn't seem to seal right, it doesn't make a suction sound when i open it and feels loose.
- i have it on the coldest setting but my drinks are just kinda cool, not cold like a real fridge.
- the interior light won't turn on when i open the door anymore, but the fridge still cools fine.
- how do you even clean the inside of this? i spilled a soda and it went under the bottom shelf where you can't reach.
- this thing is way louder than i expected, it makes a constant humming or buzzing vibration noise.
- the glass door on my drink fridge is sweating or fogging up really bad on the outside, it's making a puddle on my floor.
- my new feelfunn cooler just got here but it's not getting cold at all, the light is on but it feels like room temp inside.
- it says ready in 6 minutes but mine takes like 20 to make the first batch. is it broken?
- after a power outage, my ice maker just has a dash on the display and is totally unresponsive.
- the ice basket is full but it won't stop making ice, it just overflows. how do i fix the sensor?
- water is leaking from the bottom of my euhomy ice maker, all over my counter. where's it coming from?
- it's making a really loud grinding or rattling noise, not the normal hum. should i unplug it?
- the auto clean light is flashing and it won't let me make ice, how do i get it out of this mode?
- the ice it makes is super wet and mushy, not like sonic ice at all. how do i get harder nuggets?
- my new euhomy nugget ice maker just beeps nonstop after i plug it in and doesn't start making ice, what's wrong?
- the ice comes out wet and slushy and melts super fast.
- water is leaking from the bottom of the machine, not from the tank.
- it's only making a tiny amount of ice, like a handful every few hours.
- the clean light is solid red and won't go off even after i ran a cleaning cycle.
- my wifi won't connect to the ge app, it just times out every time.
- it's making a loud grinding or squealing noise, not the normal humming.
- opal 2.0 ice tastes kinda plasticky or like the water hose, it's been a few weeks.
- my opal 2.0 just flashes the blue light and won't make ice, it's been hours.
- the door on my bcrk25v doesn't seem to close flush anymore, it sticks out a bit at the top. can i adjust it?
- how do you clean the inside of this thing without damaging it? the manual just says 'use a damp cloth' but there's sticky stuff.
- my compact fridge seems to run non-stop and never shuts off. is it going to burn out?
- the freezer in my 2.5 cu ft black and decker is building up a huge wall of ice on the back. fridge part is fine.
- water is pooling in the bottom of my fridge under the crisper drawers. where is it coming from and how do i stop it?
- my black decker mini fridge is making a loud gurgling or bubbling noise, like water running. is that normal?
- just plugged in my new bcrk25v and the interior light won't turn on when i open the door. is it broken already?
- my black and decker 2.5 fridge is running but not getting cold at all, freezer is just cool. what gives?
- the on-screen menu joystick feels super stiff and sometimes doesn't register my pushes, am i breaking it?
- the hdr mode makes everything look dark and grayish instead of bright and punchy on my ps5.
- how do i clean the screen on this thing? the manual says not to use any liquids but it's got smudges.
- i'm getting a weird faint buzzing sound from the back of my 27gp850-b, is it coil whine?
- the monitor won't wake up from sleep when i move my mouse, i have to turn it off and on again.
- the colors look super washed out and flat compared to my old monitor, did i get a bad panel?
- the monitor stand wobbles a lot on my desk when i type, is this normal for the 27gp850-b?
- my new lg 27gp850-b keeps going black for a second and then coming back on, especially when gaming.
- after a cycle, the clothes are sopping wet like it didn't spin all the water out.
- it's unbalanced on every spin and makes a loud banging, then stops.
- the lid lock light just keeps blinking and it won't run, even though the lid is closed.
- it fills up with water super slow, takes forever to start a load.
- how do i clean the filter on my whirlpool washer? it smells musty.
- washer won't start, just beeps once when i press power and nothing lights up.
- my top load whirlpool is making a loud grinding noise only on the spin cycle, sounds awful.
- my whirlpool washer just says F21 and won't drain at all, what does that mean?
- clothes are still soaking wet at the end of the cycle on my lg front loader, not spun dry.
- my lg washer won't power on at all, no lights, nothing. i checked the outlet and it's fine.
- the wash cycle on my wm4000 takes forever, like 3 hours for a normal load, is that right?
- there's a musty smell coming from my lg front load washer, especially the rubber door seal. i run clean cycles.
- my lg smart washer won't connect to the wifi anymore, the thinq app just says offline.
- getting an le error code on my lg wm4000hwa washer, how do i fix the drain problem?
- why does my lg front loader make a loud banging noise during the spin cycle? it's the wm4000 model.
- my lg wm4000hwa just beeps three times and won't start the cycle, the door is definitely closed.
- it feels underpowered and bogs down in cuts it used to handle fine, even with a fresh battery.
- chain won't stop spinning when i let go of the trigger, it just keeps going slowly.
- dewalt chainsaw won't start at all, no noise, no click, nothing. battery works in my drill.
- my chainsaw makes a high-pitched whining or grinding noise when it runs, doesn't sound right.
- the chain on my dccs620b keeps coming loose no matter how tight i get it, i tighten it and two cuts later it's sagging again.
- oil is leaking out of my dewalt chainsaw like crazy from the bottom when it's just sitting in the garage.
- chainsaw starts but then stops after a few seconds of cutting, like it's overheating or something. battery is full.
- my dewalt 20v chainsaw ran fine yesterday but today it just clicks when i pull the trigger, no blade movement at all.
- the plastic on my brita pitcher has gotten cloudy and scratched up, can i clean it or is it ruined?
- water is pooling in the top reservoir of my brita and not draining down through the filter at all.
- the lid on my stream rapids won't lock onto the pitcher right, it feels loose and wobbly even when it clicks.
- the little electronic filter indicator on my brita won't reset, i held the button but it just stays red.
- the water from my stream rapids tastes kinda plasticky or weird, even after changing the filter. what's going on?
- my brita stream rapids pitcher is leaking water from the bottom seam where the lid clicks on, it just drips down the side when i tilt it.
- i see a white filmy buildup or flakes floating in the water inside my brita reservoir.
- the filter indicator light on my brita pitcher won't reset, i pushed the button but it's still red.
- my brita water doesn't seem cold even after hours in the fridge, what gives?
- the lid on my brita pitcher won't close or latch properly anymore, it just pops open.
- there's black specks or little black bits in my filtered water, is my filter broken?
- my brita is filtering super slow, like it takes an hour to fill the pitcher. filter is new.
- water is leaking from the bottom of my brita pitcher where the handle is, it just drips on the shelf.
- i’m getting a ‘overload’ error and it shuts off as soon as i plug in my air compressor.
- after winter storage my predator 3500 is surging and sputtering, won’t run smooth.
- the battery on my predator 3500 is dead and it won’t electric start, can i still pull start it?
- my generator ran out of gas and now it won’t start back up even with a full tank.
- the eco mode on my predator 3500 makes the lights in my rv flicker really bad, is that normal?
- i can’t get the parallel kit to work with my two predator 3500s. one just shuts down when i connect them.
- why does my predator 3500 only put out like 90 volts? my fridge won’t run on that.
- my predator 3500 inverter generator just keeps beeping and won’t start up, what’s the deal?
- can i use my blueair 211+ with the fabric cover off? i want to see the filter light up.
- how do i know when to actually change the filter on my blueair 211+? the light hasn't come on.
- the fan on my 211+ seems weak, i can barely feel air coming out the top even on the highest setting.
- is it normal for my blueair 211+ to smell a little weird, kinda plastic or chemical, when i first run it?
- my blueair 211+ won't turn on at all, no lights, no fan, nothing. checked the outlet and it's fine.
- the fabric pre-filter on my 211+ is looking really dirty, how do i clean it? can i just throw it in the washing machine?
- just got my blue pure 211+ and the light won't turn off even when i press the button, it's stuck on.
- my blueair 211+ is making a loud rattling or buzzing noise, like something is loose inside it.
- after storing my z6 for the winter, it won't turn on at all, no lights on the display
- one side of my z6 drives slower than the other, it pulls to one side when i'm trying to go straight
- how do i clean the underside of the deck on this thing, grass is caked on super thick
- the battery indicator on my z6 flashes red even after a full charge, won't let me mow
- i get an error code e1 or e2 on the display of my ego z6, what does that mean?
- my z6 is making a loud clicking or grinding noise from underneath when i try to drive
- the blades on my z6 won't engage, i press the button and the light comes on but they don't spin
- my ego z6 just beeps three times when i try to start it and nothing happens, battery is full
- i replaced batteries in my old thermostat but nest e says no power to rh wire even though my heat works
- the nest e screen stays dark unless i wave my hand right in front of it, is the sensor broken?
- nest e installed but it says my system is only single stage when i know my heat pump has auxiliary heat
- my nest e keeps losing wifi connection every day or two, i have to reboot it to reconnect
- how do i clean the nest e screen? it's got fingerprints and smudges and my shirt just makes it worse
- nest e says delayed for 2+ hours when i try to turn on the heat, but the furnace never starts
- why is my nest e making a faint clicking sound every few minutes when the heat is off?
- my nest thermostat e just went blank and won't turn on, no lights or anything, what do i do?
- after cleaning, there's a cloudy film on the inside of my ninja blender jar that won't come off.
- the 'dough' setting on my ninja doesn't seem to mix my bread dough, it just spins it into a ball that rides the blade.
- the blender works but the single serve cups won't lock onto the base, they just spin freely.
- my ninja professional plus leaks from the bottom of the jar every time i make a liquidy blend.
- how do i get the smell out of the blender gasket? my smoothies taste like old onions now.
- i keep getting an 'e01' or 'e1' error code on my ninja blender and it shuts off after a few seconds.
- the touchscreen on my ninja bn801 is completely unresponsive, buttons light up but nothing happens when i tap them.
- my ninja professional plus blender just makes a loud humming noise but the blade won't spin at all, what's wrong?
- after pressure cooking, the display says ‘L0:30’ or ‘L0:45’ and just sits there, never switching to ‘End’.
- the steam release valve is super stiff and hard to move between sealing and venting.
- the yogurt function isn't working, it just says ‘Hot’ and never seems to get to the right temperature for fermenting.
- the display is totally blank, no lights, nothing when i plug it in. it’s dead.
- it's making a loud hissing noise and steam is shooting out from around the lid, not the steam release valve.
- i get the ‘Lid’ error message and it won't start no matter what i do.
- the lid on my instant pot pro won't turn to lock or unlock, it feels completely stuck.
- my instant pot pro just says ‘food burn’ and shuts off every time i try to pressure cook, even with plenty of liquid.
- the led work light on the front of my saw won't turn on anymore
- there's a bad burning smell coming from my saw near the motor, and sometimes a little smoke
- i can't get the variable speed to work on my p519, it's only full blast or nothing
- the saw vibrates way more than it used to, it's shaking my arm numb on long cuts
- the shoe on my reciprocating saw is super wobbly and slides around when i'm trying to cut
- my ryobi saw just stopped running mid-cut, now it doesn't do anything when i pull the trigger
- the blade clamp on my p519 is stuck, i can't get the old blade out no matter how hard i pull
- my ryobi reciprocating saw is making a really loud grinding noise when i pull the trigger, sounds awful
- i dropped my ryobi drill and now it makes a grinding noise when it's under load, like drilling into wood
- my drill works but the led work light doesn't turn on anymore when i pull the trigger
- the battery doesn't seem to lock into my drill solidly anymore, it kinda rocks and feels loose
- my ryobi drill gets really hot right above the trigger after like 10 minutes of use, is that safe
- the forward/reverse lever on my p215 feels loose and sometimes slips back to the middle by itself
- my ryobi drill battery charges fine but the drill only works on high speed, low speed does nothing
- the chuck on my ryobi one+ drill wobbles a bit when it's spinning, is that normal or did i break it
- my ryobi p215 drill just makes a clicking noise when i pull the trigger and the chuck won't spin
- can i turn off the bright white leds on the front of the asus router? they're distracting at night.
- devices in my house won't automatically reconnect to wifi after coming back home, i have to toggle wifi off and on.
- the power light on my router just keeps slowly blinking blue, it never turns solid.
- my wifi speed on the ax55 is way slower than my internet plan, especially on my phone.
- how do i do a hard reset on the asus rt-ax55? i forgot my admin password.
- the 5ghz wifi network from my rt-ax55 just disappears sometimes and devices drop off.
- i keep getting logged out of the asus router admin page, like it won't save my password or settings.
- my asus rt-ax55 router is on but the internet light is solid red and i have no connection, what gives?
- i factory reset my xt8 and now i can't get back into the admin page at 192.168.50.1, it just times out.
- the ai mesh page in the settings shows my node connection is weak, but i can't run an ethernet cable between them.
- after a firmware update, my whole network got slow and some devices won't connect. how do i go back?
- my xt8 units get really warm, almost hot to the touch on the top. is this normal or a fire hazard?
- the 5ghz band just disappears sometimes on my zenwifi, my devices say they're connected but have no internet.
- how do i actually add a new xt8 node to my existing mesh? the app isn't making it clear.
- i keep getting 'wan ip not found' or 'internet status disconnected' on my xt8 setup, my modem works fine though.
- my xt8 node just has a solid red light and my phone won't connect to the wifi anymore, what's wrong?
- copies come out with black streaks and smudges down the page on my brother mfc-j1010dw
- the ink levels on my brother j1010dw are always wrong, says empty but it's not
- how do i scan to my computer with this thing? the brother software is confusing
- my brother printer is making a loud grinding noise when it prints, sounds bad
- getting a 'support code 46' error on my brother mfc-j1010dw, can't print or scan
- brother mfc j1010dw won't connect to wifi, i've tried everything and it just fails
- why is my brother printer printing really faded even with brand new ink cartridges?
- my brother mfc-j1010dw just beeps a bunch of times and says manual feed mode on the screen, what's that?
- i just refilled all the inks but the printer still says one color is low or empty, is the sensor broken?
- can't get my computer to see the printer over wifi even though the printer's wifi light is on, drivers are installed.
- scanner on my et-2800 won't work, it says 'scanner error' and the light just stays on.
- how do i get this stupid 'ink pad is at the end of its service life' message to go away on my et-2800?
- printer says 'out of paper' when the tray is completely full, i've reloaded it five times.
- why does my epson ecotank make a loud grinding noise every time it starts a print or copies something?
- et-2800 is printing super faint or has streaks even though the tanks look full, did i get a dud?
- my new epson ecotank et-2800 won't connect to wifi, it just keeps searching and never finds my network, what do i do?
- my ninja combi makes a loud humming or grinding noise when the fan runs
- the touch buttons on my ninja combi are unresponsive or going crazy on their own
- why does my ninja combi beep three times and stop when i try to slow cook?
- the keep warm function on my ninja combi turns off by itself after a while
- my ninja combi is leaking steam/water from around the lid when pressure cooking
- how do i clean the inside of the lid on my ninja combi? there's gunk in the little hole
- the air fryer setting on my ninja combi isn't crispy at all, food comes out soggy
- my ninja combi multicooker just beeps and won't start, the display shows 'C01'
- i get an 'err' message on the screen sometimes, usually when preheating. what does that mean?
- food at the bottom of the basket is burning but the top isn't cooked through in my vortex plus.
- the basket is stuck in my vortex plus and i can't get it out, feels locked in place.
- how do you clean the inside top of the vortex plus? grease is splattered up near the heating element.
- my air fryer makes a loud rattling or vibrating noise when it's running, it didn't used to do that.
- the display on my vortex plus is completely blank, no lights, nothing, but it's plugged in.
- why does my instant vortex plus smell like burning plastic the first few times i use it?
- my vortex plus just beeps and shows the word 'food' on the screen and won't start cooking, what's that about?
- i washed the filters but now my shark has no suction at all. what did i do wrong?
- the battery seems to die in like 5 minutes on the max setting, is that normal?
- the handheld part won't click into the dock properly, it just falls off the wall.
- my vacuum makes a high pitched whining noise when it's running, sounds bad.
- how do i reset my shark cordless vacuum? it's acting weird and not holding a charge.
- the brush roll on my shark cordless pro keeps stopping on my medium pile carpet.
- shark iz562h suction is suddenly really weak, even on max mode. i just emptied the bin.
- my shark cordless pro just flashes red and won't start, what does that mean?
- the motorized head on my v8 won’t spin, but the vacuum itself turns on.
- my dyson v8 makes a high-pitched whistling or screaming noise when it runs.
- the clear bin on my v8 is impossible to empty, stuff just gets stuck in the top.
- the battery on my v8 dies in like 5 minutes now, it used to last way longer.
- my dyson v8 turns on for a second then immediately shuts off. it’s fully charged.
- how do i get the red hair wrap thing off the roller on my v8? it’s completely stuck.
- the suction on my v8 is really weak all of a sudden, even on a full charge. it’s not picking anything up.
- my dyson v8 just flashes the blue light and won’t run at all, what does that mean?
- how do i adjust the coffee strength on this thing? the knob doesn't seem to change much.
- the machine turns on and heats up but when i press brew, nothing happens, no pump sound.
- i just got a used magnifica s and the coffee tastes terrible, like burnt plastic or chemicals.
- steam wand just drips or sputters weak steam, won't froth milk properly anymore.
- my machine says it's out of water but the tank is completely full, what's going on?
- coffee keeps coming out really weak and watery no matter how fine i set the grind, help?
- the grinder on my delonghi magnifica s is making a horrible loud screeching or grinding noise, is it broken?
- my magnifica s is just showing three flashing lights and won't make coffee, what do i do?
- i keep getting a ‘prime’ message on the screen and it won’t brew, even though the tank is full.
- the ‘hot’ setting on my supreme plus isn’t actually hot, it’s just lukewarm, even on the highest temp.
- water is leaking out from the bottom of my supreme plus, right onto the counter, mostly during the brew.
- the descale light won’t turn off even after i ran the descaling cycle twice with vinegar.
- my coffee tastes weak and watery no matter what strength setting or pod i use on the supreme plus.
- the display on my keurig supreme plus is blank, no lights, but i can hear a faint hum when it’s plugged in.
- got a new supreme plus and it won’t connect to my wifi, just keeps saying setup failed on the app.
- my k-supreme plus just started making this awful grinding noise when it’s brewing, sounds like it’s dying.
- how do i clean my dyson pure cool fan, the outside is super dusty
- cleaned my area rug and now my crosswave smells like wet dog, how do i clean the machine itself?
- bissell crosswave is leaking water all over my floor when i use it
- my ninja blender is leaking from the bottom of the pitcher when i make a liquidy smoothie
- the touchscreen controls on my bn701 are not responding, or they beep when i don't even touch them
- i can't get the blade assembly off my ninja blender pitcher to clean it, it's stuck on there tight
- the dough setting on my ninja blender makes a horrible grinding noise and doesn't mix the dough
- my ninja professional plus blender base gets really hot and smells like burning after a few minutes of use
- how do you get the smell out of the ninja blender lid gasket? it stinks like old smoothie
- the auto-iq smoothie setting on my bn701 just runs for a second and stops, it doesn't do the full cycle
- my ninja professional plus blender just flashes the 'add more liquid' light no matter what i put in it
- can i use one of the spare deco x20 ethernet ports to hook up my non-wireless printer? it's not showing up on the network.
- after a power outage, my main deco x20 has a blinking blue light and won't come online.
- my deco x20 system was working for months but now the internet speed to my wired pc is super slow.
- how do i get my smart home devices to connect to the 2.4ghz network? my deco x20 only shows one combined name.
- one of my deco x20 units is making a faint high-pitched buzzing or whining noise, is it dying?
- internet is fine but my deco app says 'offline' for the whole system and i can't manage anything.
- just set up my deco x20 mesh but my phone keeps switching to a weak signal from a faraway unit instead of the strong one right next to me.
- my deco x20 satellite unit just has a solid red light and my devices won't connect to it, what do i do?
- why does my 4155e take forever to print, like several minutes just to spit out one page?
- trying to scan from my phone with the hp smart app and it just won't find my 4155e printer.
- my prints are coming out with streaks and faded colors, i just put in new hp 67 ink, is the printer broken?
- the touchscreen on my deskjet 4155e is totally unresponsive, i can't press any buttons.
- my hp 4155e is making a horrible grinding noise when it tries to print, like a crunching sound.
- just got a 4155e and the screen says 'carriage jam' but nothing looks stuck, what do i do?
- my hp deskjet 4155e says it's offline on my computer and won't print, how do i get it back online?
- the rotisserie spit for my vortex plus won't turn or it turns really slow and jerky.
- i just got a vortex plus and the clock is always blinking 12:00, how do i set it and make it stay?
- the air fryer turns on but doesn't seem to get hot enough, food takes forever.
- the touch buttons on my air fryer are not responding or i have to press really hard.
- my vortex plus display is showing 'burn' or 'food burn' and shuts off, but my food isn't burnt.
- how do you clean the inside of the vortex plus? the top part above the basket looks gross but i can't get to it.
- the air fryer is making a loud rattling or buzzing noise when it runs, sounds awful.
- my vortex plus air fryer just beeps three times and won't start cooking, what's the deal?
- i'm trying to make yogurt in my instant pot ultra but the "yogurt" button just blinks and doesn't start the cycle.
- the buttons on my instant pot ultra are beeping but not responding when i touch them, it's stuck on the clock screen.
- my instant pot ultra says "food burn" immediately when i try to sauté something, before i even start pressure cooking.
- how do you get the smell out of the instant pot silicone ring? everything i cook tastes like the chili i made last week.
- why does my instant pot ultra make a loud, scary hissing noise the whole time it's cooking? is it supposed to do that?
- my instant pot ultra 6qt won't turn on at all, the screen is completely dead even though it's plugged in.
- the float valve on my instant pot ultra won't pop up when i start a pressure cook, it just sits there and steam comes out the side.
- my instant pot ultra just says "burn" and won't pressurize, even though there's plenty of liquid in there.
- the auto-empty dock for my s7 is super loud and sounds like it's choking, but no dustbin is full.
- roborock s7 won't connect to my wifi during setup, it just times out every single time.
- why does my roborock s7 keep missing big obvious spots? it goes around whole sections of the room.
- my s7 is vacuuming fine but it won't map my house at all, the map is just a blank grey blob.
- the vibrating mop on my s7 is making a really loud grinding noise, sounds like it's gonna break.
- roborock s7 keeps getting error 13, what does that mean and how do i stop it?
- just got an s7 and the mop pad isn't getting wet at all, it's just dragging a dry cloth around.
- my roborock s7 is stuck on 'charging' but the battery never goes above like 20%, it just sits there forever.
- how do i clean the racks in my chefman dual basket air fryer? they're stuck and i don't wanna break them.
- cleaning the glass door on my ninja crispi pro, can I use glass cleaner or is that bad for it?
- how do i clean the inside of my cuisinart air fryer toaster oven? the manual says not to use oven cleaner
- how do i cook two different things at the same time in my ninja foodi 2-basket? like fries and chicken?
- my chefman compact air fryer won't turn on at all, no lights
- how do i clean my hamilton beach frontfill 12 cup coffee maker? it's starting to taste kinda funky.
- how do you clean the inside needles on a keurig k-supreme? getting coffee grounds in my cup.
- installing my APEC ROES-50, can I drill through granite for the faucet? what size bit?
- how often do i really need to change the filter in my brita longlast pitcher? the light isn't on yet.
- my brita pitcher filter indicator light is blinking red, what does that mean and what do i do?
- how often do i need to sharpen the chain on my stihl ms 250? i'm just cutting firewood
- one of the filter housings on my apec ro system is leaking from the bottom. how do i fix it?
- how do i clean the air filter on my husqvarna 455 rancher? can i just rinse it with water?
- the chain on my husqvarna 460 rancher keeps coming loose no matter how tight i get it, am i doing something wrong?
- brita filter indicator light not working at all, pitcher still works though
- installing my apec ro system, what's the deal with the drain saddle? do i have to drill a hole in my pipe?
- my apec ro water tastes weird or salty after a few months. is the membrane bad?
- trying to game on my lg 27ul500-w and the screen feels laggy or has tearing. i thought it had freesync?
- ego chainsaw headlights won't turn off, they just stay on dim after i use it. is my saw broken?
- i connected my laptop to my lg 27ul500-w with hdmi but the screen is black. the laptop says it's connected. help?
- ego chainsaw cs1800e chain keeps coming loose while i'm cutting, how do i tighten it right?
- how do i know if i have a brita longlast filter or a standard one?
- how do i reset the filter change indicator on my brita pitcher?
- how do i use the easy arrange feature on my dell ultrasharp u2722d? it's not snapping windows right.
- my kitchenaid k400 blender handle feels loose, is it supposed to wiggle like that?
- how do i use the tamper thing that came with my kitchenaid k400 blender?
- vitamix e310 tamper keeps getting stuck or hitting the blades, am i using it wrong?
- vitamix e310 making a loud grinding noise when i turn it on, is the motor broken?
- how do i clean the screen on my LG 27UL500-W without damaging it?
- can i mount my LG 27UL500-W monitor on the wall?
- can i daisy chain another monitor from my dell u2722de? how does the dp out port work?
- how do i clean my dell u2722dx monitor screen without damaging it?
- what's the pulse function for on the kitchenaid k400 blender? just seems like a start button.
- how do you use the tamper thing on the kitchenaid k400? the manual is confusing.
- how tight should the chain be on my stihl ms 250? i feel like i'm always adjusting it.
- stihl ms 250 keeps dying as soon as i give it gas, runs fine at idle. anyone else have this?
- vitamix e310 lid plug is stuck, i can't get it out to add more stuff, help
- how do i clean my vitamix e310 blender properly? can i just rinse it?
- my husqvarna 455 rancher chain keeps coming loose and slipping off the bar while i'm cutting. am i doing something wrong?
- my honeywell hpa300 smells weird when i first turn it on, like burning dust. is this safe?
- can i run two honda eu2200i generators together for more power? what's the right way to hook them up?
- how do i make my dell ultra sharp monitor snap windows into different zones like i saw in a review? the easy arrange thing.
- how do i ground my wen portable generator? the manual says to but doesn't explain it well.
- how do you change the spray tip on the greenworks 1800 psi pressure washer wand? it feels stuck
- just got my ROES-50, one of the plastic filter housings has a small crack from shipping. can i still install it?
- installing my APEC ROES-50, do i need any special tools? the manual list is confusing.
- what's the little plastic stick for that came with my kitchenaid k400?
- how do i use the pulse button on my kitchenaid k400 blender? it doesn't seem to do anything.
- black stuff coming out of my new brita filter into the water, is it safe?
- brita pitcher lid won't close all the way, it's stuck open
- the trigger on my sun joe pressure washer is stuck or locked, i can't pull it to spray, how do i unlock it?
- my sun joe pressure washer is making a weird clicking noise and then stops, is this broken?
- my honeywell hpa300 is super loud on the highest setting, is it supposed to be this loud?
- honeywell hpa300 making a weird grinding noise, is that normal?
- how do i switch from soap back to just water on the sun joe spx3000?
- i'm camping at about 5000 feet and my wen generator keeps dying or losing power. is there a fix?
- how do i properly store my wen portable generator for the winter?
- just installed an ecobee, it won't turn on at all. did i wire it wrong?
- stihl ms 250 chain oil tank is leaking, seems like it's coming from the cap. how do i seal it?
- my stihl ms 250 chainsaw won't start when it's cold, what am i doing wrong?
- honda eu2200i keeps shutting off after a few minutes, not the oil light, what gives?
- can i run my honda eu2200i in my garage with the door open? is that safe?
- just got an ecobee smartthermostat premium and i have no c-wire. the pek adapter is confusing, how do i hook this thing up?
- my furnace won't power on after installing the honeywell t9. i turned the breaker back on but nothing.
- honeywell t9 installed but my heat won't turn on. system mode is set to heat and temp is higher than room temp, but nothing happens.
- my husqvarna 460 rancher is vibrating way more than it used to, feels harsh in my hands. what should i check?
- husqvarna 460 rancher chain keeps coming loose while i'm cutting, i tighten it and it just happens again. how do i fix this?
- do i need an electrician to install the honeywell t9? i don't see a c wire
- what's the black tip for on my greenworks pressure washer? the one with the tiny pin-hole.
- honeywell t9 says it's in cool mode but the ac isn't kicking on
- greenworks 1800 psi electric pressure washer keeps shutting off after a few seconds, any ideas?
- how do i put the bag on my new honda hrn216? the clips aren't obvious.
- how tight are the blade bolts supposed to be on a honda hrn216? i don't want them flying off.
- can i use dell display manager to control my dell u2722d when it's hooked up to two different computers for kvm?
- can i run my honda lawn mower in my garage to warm it up on a cold morning?
- how do i change the blade on my honda hrn216vka? is it hard to do?
- where should i put the ecobee smart sensors for them to work right? my living room one seems wonky.
- the centering pad fell off my vitamix container, can i still use it?
- greenworks mower is vibrating a lot more than usual and sounds rough. is the blade loose?
- my vitamix explorian is making a horrible grinding noise and seems stuck. what do i do?
- greenworks 40v mower handle won't lock into place, it just flops around. how do i fix it?
- can my honeywell hpa300 run 24/7 in my bedroom or will it overheat?
- how do i clean the filter on my honeywell hpa300? do i just vacuum it?
- how do i prioritize a specific room with the honeywell t9 and the wireless sensors?
- my honeywell t9 says it's heating but my furnace isn't kicking on, help?
- how do i change the cutting height on the ego lm2135sp, the lever is stuck
- how do i clean under my greenworks cordless mower deck? it's caked with grass.
- how do you change the blade on an ego lm2135sp? i can't figure out how to lock it.
- just got a makita xsh03z, can i use it to make plunge cuts or not?
- honda eu2200i making a weird clicking noise from the control panel, and the eco throttle light is acting funny. is this normal?
- makita xsh03z saw keeps kicking back on me, almost lost control. how do i stop this?
- how do i replace the blade on my ego lm2135sp? it hit a rock and is bent.
- just got a makita xsh03, how do i set the cutting depth correctly?
- makita 18v circular saw blade guard stuck open, what do i do?
- ryobi p215k1 drill driver feels weak, barely screws into wood. battery seems fine.
- can i use my bigger ryobi 9.0ah battery on the p215k1 drill?
- ryobi one+ drill driver keeps stopping mid-drill like it's bogging down
- is it okay to use my ryobi 18v drill driver to mix paint or mortar?
- can i use my milwaukee m18 drill to mix drywall mud or is that gonna burn it out?
- where's the best place to put the ecobee smart sensor in my bedroom for sleep comfort?
- my makita drill won't drive screws all the way in, it just stops and spins. what am i doing wrong?
- makita 18v drill bit is stuck and won't come out, how do i get it out without breaking something?
- my makita 18v drill bit keeps slipping in the chuck, it won't grip tight, how do i fix this?
- my honeywell t9 says it's heating but cold air is blowing, or the aux heat kicks on when it's set to cool
- is it okay to leave my dewalt battery on the charger all the time?
- the bit keeps falling out of my dewalt impact driver, the chuck feels loose. how do i fix it?
- my dewalt battery pack gets really hot when charging, is that safe?
- can i use an extension cord with my dewalt battery charger? my outlet is far from where i need to charge.
- how do i clean my dewalt drill driver, can i use wd40 or something?
- greenworks 40v mower handle feels loose and wobbly. how do i tighten it?
- my greenworks 21 inch cordless mower suddenly stopped while i was mowing. now it won't restart, any ideas?
- can i use my dyson ball animal 2 on my hardwood floors without scratching them?
- how do you clean the filter on a dyson ball animal 2? mine's lost all suction
- how do i empty the bin on my dyson ball animal 2 without dust going everywhere?
- how do you attach the hose tools to the dyson ball animal 2? the wand keeps coming out.
- can i use my shark navigator professional on hardwood floors without scratching them?
- shark navigator lift away nv356e making a loud rattling noise from the brush roll area, sounds like something is stuck.
- my shark lift away pro nv356e won't pick up anything on my carpets, it just pushes stuff around. what's wrong?
- my shark navigator lift away pro brushroll just stopped spinning on my carpet. help?
- can i wash the filters in my dyson v8? they look really dirty.
- how do you clean the fluffy roller head on a dyson v8? it's got hair wrapped all around it.
- how do i clean the filters on my dyson v8 absolute? the manual is confusing.
- how do you empty the dyson v8 bin without dust going everywhere? it's a mess.
- how do you clean the filter on a dyson v8? it's making a weird noise.
- ryobi p215k1 drill driver forward/reverse switch is stuck and won't move, how do i free it up?
- can i use my older ryobi one+ batteries with the new p215k1 drill driver or do i need to buy new ones?
- hair wrapped around dyson v15 brush bar, how do i get it out?
- how do you clean the filter on a dyson v15? it says to wash it
- how do i safely remove a usb drive from my linksys velop?
- my linksys velop child node has a solid yellow light, what's wrong?
- linksys velop parent node light is blinking purple and won't finish setting up
- linksys velop light is blinking red, my child node keeps disconnecting
- makita xfd131 keeps stopping when i'm drilling into a stud, feels like it's bogging down
- my dewalt drill's worklight won't turn on when i pull the trigger, how do i fix it?
- dewalt 20v max drill chuck is stuck and won't release the bit, how do i get it loose?
- can i set up a dynamic dns (ddns) on my netgear orbi rbk752? i need to access my home network remotely.
- can i set up a dmz server on my orbi wifi 6 router for gaming? how?
- can't access my netgear orbi router settings, orbilogin.com page won't load
- i need to block certain websites on my orbi network for my kids, is there a keyword filter?
- what's the WPS button for on the asus rt-ax86u? is it safe to use?
- just got an rt-ax86u, how do i even set it up? my modem is already connected to my old router.
- where do i even find the filters on a shark navigator lift away professional nv356e? the manual is useless
- how do you clean the brushroll on a shark navigator lift away? it's making a weird noise
- can i use my dyson v8 on my expensive wool area rug? i don't want to ruin it.
- setting up my new asus rt-ax86u, the web page at router.asus.com won't load. what am i doing wrong?
- how do you clean the inside of a canon pixma mg3620? it's smudging the backs of my pages
- just got an asus rt-ax86u, how do i connect my phone to set it up without a computer?
- my asus rt-ax86u wifi signal is really weak in my bedroom, what am i doing wrong?
- can i plug a usb hard drive into my linksys velop to share files?
- hp smart app won't find my m234dwe during setup. it's plugged in and turned on.
- hp m234dwe keeps saying it's offline and won't print wirelessly after i moved my router. what gives?
- can i clean the glass scanner part on my mg3620? it has fingerprints and dust.
- forgot my netgear orbi admin password, how do i reset it?
- netgear orbi rbk752 setup won't connect to internet, orbilogin.com doesn't load
- can i use my hp laserjet pro m234dwe with just a usb cable or does it have to be on wifi?
- how do i clean the scanner glass on my epson wf-2860? it's leaving streaks on my copies.
- my hp laserjet pro m234dwe won't connect to wifi no matter what i try, any ideas?
- why is my epson workforce wf-2860 not picking up paper from the tray? it just makes a grinding noise.
- deco x20 firmware update keeps failing, what do i do?
- how do i change the language on my epson printer software? it installed in the wrong language
- my epson workforce wf-2860 is getting ink on the back of everything it prints, help?
- how do i clean the paper pickup roller on my hp laserjet m234dwe? it's misfeeding
- canon pixma tr8620a printing really faint, especially the color. just put in new cartridges. help?
- i'm trying to fax from my epson wf-2860 at work and it needs me to dial 9 for an outside line, how do i set that up?
- brother hl-l2350dw driver install asks if i have 32-bit or 64-bit windows. how do i know which one to pick?
- my brother hl-l2350dw works on usb but not on ethernet. the network light isn't on. is it broken?
- my canon pixma mg3620 is smudging the back of pages when i print double-sided, how do i clean it?
- the power light on my epson et-2800 is on but the screen is blank and it won't do anything.
- my canon pixma tr8620a won't scan multiple pages from the feeder, it just scans the first one. what am I doing wrong?
- how do i connect my hp laserjet pro m234dwe to wifi without using the app? my router has a wps button.
- how do i get my canon pixma tr8620a to work with alexa for ink alerts? i can't figure it out.
- how do i copy something on my epson et-2800 without using my computer?
- need to fully clean my epson wf-2860 scanner glass, how do i do it without breaking anything?
- can i use my epson et-2800 printer without a computer, just from my phone?
- how do i clean the heating coil thing in my cosori air fryer? it has gunk on it.
- trying to set up my hp officejet pro 9015e but my computer is on ethernet, will that mess it up?
- when am i supposed to use the crisper plate that came with my ninja foodi dualzone?
- my ninja foodi dualzone is burning my food on the outside but it's still raw inside. how do i fix this?
- my canon pixma tr8620a keeps disconnecting from wifi every few hours, so annoying. how do i make it stay connected?
- i see tiny cracks inside my philips air fryer pot, is it ruined?
- my cosori air fryer's crisper plate wobbles, the little rubber feet fell off. how do i get them back on?
- how do i clean the heating element thing inside my philips air fryer? it has gunk on it.
- the outside of my philips air fryer xl gets really hot, is that normal?
- how do i clean the heating coil on my cosori air fryer? it's got gunk on it
- just got an epson et-2800, how do i even fill the ink tanks without making a huge mess?
- the basket on my cosori air fryer won't slide in all the way, it feels stuck. how do i fix this?
- how do i clean the baked-on grease from my cosori air fryer basket? the nonstick surface is a mess.
- my phone can't find my hp officejet pro 9015e during wireless setup. i'm right next to it. anything else to check?
- how do i clean the basket on my cosori turboblaze? the grease is stuck on.
- can i use my ninja dualzone air fryer to dehydrate fruit?
- can i just use one basket in my ninja foodi 2-basket air fryer?
- cleaned my ninja foodi pressure cooker and now it won't come to pressure, the time just sits there. what did i mess up?
- is it safe to use an extension cord with my cosori air fryer? my outlet is far from the counter.
- how do i get rid of the plastic smell from my new cosori turboblaze?
- braava m6 keeps saying it needs water but the tank is full, what gives?
- the plastic smell from my new cosori air fryer won't go away, even after washing. help?
- how do i clean the basket on my cosori pro LE? the nonstick coating has baked-on gunk.
- my m6 robot mop is leaving streaks and not cleaning well
- braava jet m6 not returning to its charging station after cleaning
- eufy 11s robot vacuum won't go back to its charger, it just bumps around near it
- can i put foil in my cosori air fryer basket?
- eufy 11s making a grinding noise and the rolling brush isn't spinning
- my roomba i3+ evo's edge brush on the side isn't spinning at all, how do i fix it?
- my roomba i3+ evo keeps getting stuck under my couch, anyone else have this issue?
- can my eufy robovac 11s clean area rugs? it keeps getting tangled and shutting off
- braava m6 just spins in a small spot and doesn't clean my whole kitchen. is it broken?
- how do you clean the braava m6 tank? mine smells kind of funky.
- how do i stop my roomba i3+ from falling down the stairs? my home base is in the hallway near them.
- how do i clean the cappuccino maker on my delonghi magnifica s? milk keeps getting stuck
- why is my delonghi automatic espresso machine making loud bubbles in the milk froth?
- my delonghi automatic coffee maker won't turn on at all, no lights. checked the outlet. what now?
- my ninja dualbrew pro over ice brew isn't cold at all, it's just making lukewarm coffee. am i doing it wrong?
- ninja dualbrew pro keeps splattering coffee everywhere, how do i stop it?
- how do you clean the milk frother on a delonghi magnifica s? it's all gummed up
- can i use my ninja dualbrew pro to make iced coffee with the over ice setting? it never gets cold enough.
- how do i clean the ninja dualbrew pro frother whisk? can it go in the dishwasher?
- my ninja dualbrew pro is making really weak coffee, how do I fix it?
- my ninja dualbrew pro coffee has a bunch of gritty sediment in it, even with the permanent filter, help?
- ninja dualbrew pro coffee is splattering everywhere when i brew into my mug, how do i stop the mess?
- how do i descale my breville barista express? the light is solid on.
- how do you clean the outside of the mr coffee programmable? the stainless steel part looks stained and greasy
- the clock on my mr coffee bvmc-zh1b keeps resetting to 12:00 every time i unplug it, is the battery dead?
- my breville barista express is leaking water from the group head when i'm not even using it, help?
- mr coffee 12 cup programmable making a loud gurgling noise while brewing, is that normal?
- mr coffee bvmc zh1b keeps shutting off after a few minutes, not finishing the brew cycle. why?
- how do i take apart the k-cup holder on my keurig to clean it? scared of the needles.
- i'm storing my keurig k-classic in the garage for the summer, anything special i need to do?
- my keurig k-classic won't start brewing, the 'place cup' light just keeps flashing.
- how do i clean the inside of my mr coffee 12-cup? it's starting to smell weird
- mr coffee bvmc-zh1b making a loud gurgling noise and spitting coffee grounds into the pot
- how do i preheat my ninja af101 air fryer? the manual is confusing
- can i use my ninja af101 to dehydrate fruit? how do i set it up?
- the side brush on my roomba 694 fell off and i can't get it back on right.
- how do i clean the sensors on my roomba 694? it's bumping into walls more than usual.
- how do i clean the water reservoir on my keurig mini? it's starting to look funky inside.
- how do i clean the needles on my keurig k-mini? getting coffee grounds in my cup.
- my elite gourmet coffee maker won't turn on, just got it out of the box
- my mr coffee bvmc zh1b is leaking water from the bottom when i try to brew
- hamilton beach flexbrew 2-way coffee maker won't brew into my travel mug on the single-serve side, just drips into the tray
- how do i clean the mineral buildup out of my elite gourmet ehc113m coffee maker?
- bella dots 12 cup programmable coffee maker leaking water from the bottom, what gives?
- my mr coffee mini brew switch coffee maker is leaking water from the bottom. what's wrong?
- kefeya g2 remote control isn't working, how do i pair it?
- amazon basics monitor screen is black but power light is on, no signal from my pc. how do i fix this?
- my sansui 24 inch monitor just says 'no signal' even though the light is on, any fixes?
- what's the best way to clean my dell 24 plus monitor screen without damaging it?
- my epson et-2400 is making a weird noise when it scans, like a grinding sound. is it broken?
- tramontina stainless steel pressure cooker lid won't lock shut, is it broken?
- my t-fal clipso pressure cooker lid handle won't turn to lock. it's stuck. help?
- barton 6 quart pressure cooker lid won't open after cooking, the floating valve is still up. help!
- how do I clean the air vent on my denali tanker pressure canner? it feels sticky
- prestige pressure cooker making a hissing noise from the side while cooking, is that normal?
- accidentally left food in my hawkins contura for hours, now the inside looks darker and stained, is it safe and how do i clean it?
- my presto stainless steel pressure cooker is leaking from the lid, what part do i need?
- how do i clean the lid on my calphalon stainless steel pressure cooker? the manual is gone.
- presto 01264 pressure regulator isn't rocking steadily, just hissing. how do i fix this?
- my new t-fal aluminum pressure canner came with a weird metal rack, what's it for?
- how do i clean the gasket on my hawkins classic pressure cooker? it smells weird.
- cosori pressure cooker leaking steam from the side of the lid, did I break it?
- how do you clean the print head on a supvan t50m pro label maker?
- my hp officejet pro 8125 is in sleep mode, how much power does it actually use
- my niimbot b1 prints are super blurry and faint, how do i clean it?
- how do i clean the head on my knwon printer? it's getting white spots on the labels.
- how do i clean the scanner glass on my epson ecotank et-2800? the manual is useless.
- my canon printer is printing with missing lines and streaks, how do i fix it?
- can i lay my electactic mini fridge on its side to move it?
- auertech portable washing machine is vibrating like crazy during spin cycle, how do i fix this?
- my crzoe countertop ice maker just arrived, can I plug it in right away or do I need to wait?
- jeevony dv180 dryer vent magnets won't connect properly, keeps coming apart
- how do i defrost my antarctic star compact fridge? it's building up ice
- ninja blendsense blender blade assembly is stuck, can't get it off to clean
- is it safe to blend warm food in my nutri bullet baby? i just steamed some carrots.
- how do you clean the blades on a hamilton beach power elite blender safely?
- how do you clean the blending part of the ovente hand blender? can i put it in the dishwasher?
- ninja ultracrush is stuck to my countertop, how do i get it off without breaking it?
- how do i clean my magic bullet blender cups when stuff is really stuck on?
- my nutribullet motor base smells like it's burning and then shuts off after a minute, is it broken?
- orange light came on while blending, does that mean it's broken?
- what's the best way to clean the screen on this monitor? i don't want to damage it.
- my food isn't getting crispy, it's just steaming at the bottom. what am i doing wrong?
- the basket is stuck and won't come out of the pot, how do i get it out without breaking it?
- what's the right way to clean the inside of this thing? i don't want to mess it up.
- my opal ice maker just arrived and won't turn on, what's the deal?
- the door on my beverage cooler won't close all the way, it just pops back open
- is it safe to put foil in the bottom drip tray to catch grease?
- how do i clean this thing? the manual's long and i just want the basics
- how do i clean the basket if there's really stuck-on grease? soap and water isn't cutting it
- the blender jar keeps leaking from the bottom when i make smoothies. how do i fix that?
- the cord is kinda short, can i use an extension cord with this?
- the 'ICE FULL' light is on but the basket isn't full, it just stopped. how do i get it going again?