TM
Theo Marsh
Broken more gadgets than he will admit to.
Theo has bought, used, and eventually broken an unreasonable number of small appliances and electronics. He remembers the annoying stuff -- the beep codes, the settings buried three menus deep -- because he has hit every one of them himself.
Answers from Theo Marsh
- i dropped my impact wrench and now the trigger feels loose and doesn't always engage. did i just kill a $300 tool?
- the LED worklight on my dtw1002z stays on all the time now, even with the battery off. how do i make it stop draining batteries?
- my impact wrench gets crazy hot around the battery area after just a few minutes of use, way hotter than my drill. is this safe?
- the forward/reverse selector on my impact wrench is super stiff and sometimes gets stuck in the middle. did i break it?
- i get a high-pitched whining or grinding noise from my makita impact when i pull the trigger lightly, but it goes away on full power. normal?
- my dtw1002z seems way weaker than it should be, it struggles on lug nuts my old corded impact handled fine. is it the battery?
- the anvil on my makita impact wrench won't hold sockets anymore, they just slip right off. can i fix this myself?
- my makita dtw1002z impact wrench just flashes red and won't do anything when i pull the trigger, what's the deal?
- the wand release button on my flash is stuck or really hard to press, can't adjust the height.
- my vacuum just shuts off after a few minutes of use, then comes back on after it cools down.
- the dirt cup on my nes510 is a pain to empty, stuff gets stuck in the top and won't fall out.
- the brush roll on my eureka flash keeps stopping when i'm vacuuming, it just spins freely by hand.
- how do you get the hose off this thing? it's stuck on the wand and i need to check for a clog.
- the suction on my flash vacuum seems really weak all of a sudden, it's not picking anything up.
- my nes510 makes a horrible screeching or grinding noise when it runs, sounds like metal on metal.
- my eureka flash vacuum just stopped working and won’t turn on at all, no lights or anything, what gives?
- water is leaking from the bottom front of my lg washer, not from the hoses.
- the power button lights up but none of the other buttons respond, it's just dead.
- the washer smells musty even after running the tub clean cycle, how do i fix it for real?
- i get a 'ue' error code sometimes, and the load is off-balance even with small loads.
- my wt7400cw leaves white residue or powder on dark clothes after a wash.
- the 'door' or 'lid' lock light just keeps blinking and my lg washer won't start at all.
- why does my lg top loader with turbowash make a loud grinding noise during the spin cycle?
- my lg wt7400cw washer keeps showing the 'oe' code and won't drain, what do i do?
- docked my tablet and now the audio only comes from the tablet speakers, not the dock speakers. what gives?
- the angle of the dock is too steep, is there any way to adjust it or make it lean back more?
- my fire tablet charges super slow when it's in the show mode dock, like 1% every half hour.
- how do you even clean this dock? the fabric part gets dusty and the plastic grooves are grime magnets.
- the charging dock makes a faint but annoying high-pitched buzzing or whining noise when it's plugged in.
- show mode won't activate when i put my fire hd 10 on the dock, it just stays in normal tablet mode.
- docked my fire hd 10 and it says 'not charging' on the screen even though the dock light is on.
- my fire hd 10 keeps falling out of the show mode dock, it doesn't seem to click in right anymore.
- the timer on my taotronics tower fan just turns the fan off randomly, not after the hours i set. like i set 4 hours and it quits after 20 minutes.
- i just got this fan and the oscillation is super stiff and jerky, it doesn't sweep smoothly at all. is it defective?
- the fan speed doesn't change right, it's either too low or jumps to max when i press the button, the middle settings don't seem to do anything.
- my taotronics fan's display is dim or flickering, and sometimes the numbers disappear completely. the fan still runs though.
- the remote for my tt-tf002 just doesn't work anymore, but the buttons on the fan are fine. fresh batteries didn't help.
- how do you clean the inside of this tower fan? it's sucking in air but the airflow feels weak and dusty.
- taotronics tower fan making a loud clicking or grinding noise from the middle section, especially on oscillate.
- my taotronics tower fan tt-tf002 just stopped working out of nowhere, no lights, nothing. i tried a different outlet and it's still dead.
- my canon printer ts6420a is connected to wifi but my computer just says 'printer offline'
- i replaced all the inks in my ts6420a but it still says one is empty or missing, what gives?
- canon ts6420a scanner lid is up but the error says 'check scanner unit' and it won't do anything
- why is my canon ts6420a printing blank pages even though the ink cartridges are full?
- my canon pixma ts6420a is making a horrible grinding noise when it prints, like it's chewing something
- setup keeps failing when i try to connect my canon ts6420a to wifi, it just won't find my network
- printer says 'out of paper' when there's definitely paper loaded in the tray, canon ts6420a
- my canon ts6420a just keeps flashing orange over and over, it won't print or scan, what do i do?
- audio is out of sync with the picture on all apps, tried restarting.
- tv turns on by itself in the middle of the night, it's kind of creepy.
- netflix/hulu/prime video apps keep crashing or saying 'out of memory'.
- the tv keeps disconnecting from wifi every few minutes, other devices are fine.
- tv screen has weird vertical lines or a distorted picture, sometimes flickers.
- my fire tv remote won't pair or control the tv, just blinks orange.
- insignia fire tv stuck on the fire tv logo and won't boot, tried unplugging it.
- my insignia fire tv 50 inch just shows a black screen but i can hear sound, what's going on?
- can i clean the lens on this thing? it's got spots and the daytime video looks blurry now.
- the status light on my c510w is always blinking blue and white, what does that mean and how do i stop it?
- my camera won't connect to the tapo app during setup, it just keeps searching and never finds the device.
- the video feed is super choppy or lags a lot when i view it remotely on my phone, is it my internet?
- i get constant false motion alerts from my tapo camera, it records every time a shadow moves or it gets cloudy.
- the infrared night vision on my c510w looks foggy or has a white haze, especially when it's humid out.
- camera says "device is offline" in the tapo app but the power light is on, how do i get it back online?
- my tapo c510w camera is stuck making a loud grinding noise when it tries to pan, is the motor broken?
- ice is forming all over the coils inside the unit, is that supposed to happen?
- the humidity reading on the display seems way off from my other hygrometer, can i calibrate it?
- it just stopped in the middle of running, no lights or display, completely dead
- the continuous drain hose option isn't working, water just fills the bucket anyway
- how do i clean the filter on this thing? i can't find any instructions on the unit itself.
- the dehumidifier fan runs but it's not pulling any water out of the air, compressor doesn't seem to come on
- my shinco 70 pint dehumidifier just shows 'cl' on the display and won't run, what does that mean?
- the wifi range on this thing seems worse than my old router, especially through walls. isn't wifi 6 supposed to be better?
- port forwarding just doesn't work on my dir-x1560, i've set the rules but the connection times out.
- i did a factory reset on my router and now i can't get past the setup, it keeps asking for an 'admin password' i never set.
- my router's fan is really loud and sounds like it's grinding, is it supposed to be this noisy?
- the internet light on my dir-x1560 is orange, not white, and my speeds are super slow. what's that mean?
- trying to set up my new d-link dir-x1560 but the d-link app just says 'unable to discover device' forever.
- why does my wifi 6 router keep dropping the 5ghz signal? my phone and laptop just lose connection randomly.
- my dir-x1560 router just has a solid red power light and my internet is completely dead, what do i do?
- mine keeps getting stuck in 'COOL' mode for like an hour and never switches to making ice.
- the ice cubes are coming out really small and thin, like slivers, not the big cubes it showed in the pictures.
- how often are you actually supposed to clean this thing? the manual is vague and it's starting to smell a little.
- it keeps beeping at me every few minutes but there's no error code on the screen, what's it trying to say?
- the ice it makes is cloudy, not clear. isn't the whole point of this machine to make clear ice?
- i just got this thing and it won't turn on at all, no lights, nothing. checked the outlet and it's fine.
- why does my ice maker sound like a garbage disposal when it's running? it's this awful grinding noise.
- my luma clear ice maker just shows 'E1' and won't make ice, what does that even mean?
- my caseta switch makes a faint humming or buzzing sound when the lights are dimmed low.
- i replaced a regular switch with a caseta and now the light just turns on full blast, won’t dim at all.
- the led light on my caseta dimmer is way too bright at night, can i turn it off or dim it?
- pressed the favorite button on my pico remote but the lights only go to like 80% brightness, not all the way.
- my caseta switch works fine manually but won’t connect to alexa or google home anymore.
- the physical caseta switch on my wall feels loose and wobbly, like it’s not mounted right.
- installed a caseta dimmer but my led bulbs are flickering or buzzing, did i get a bad switch?
- my lutron caseta dimmer switch is just flashing green and won’t turn the lights on, what’s that about?
- the timer function on my vu5670 doesn't turn the fan off when it's supposed to, it just keeps running.
- how do i reset this fan? it's acting weird and none of the buttons are responding right.
- my fan turns on but only works on the lowest speed setting, the higher speeds do nothing.
- the remote for my rowenta fan just doesn't work anymore. new batteries didn't fix it.
- can i take the whole thing apart to clean the inside of the motor housing? it's super dusty in there.
- my fan is making a loud clicking or grinding noise, especially on the higher speeds.
- the oscillation on my vu5670 has gotten super slow and jerky, sometimes it just stops swinging.
- my rowenta turbo silence fan just stopped working, no lights, nothing. it was fine yesterday.
- i added a third satellite to my system and now everything is worse, slower and dropping connections, what happened?
- my mh7023 just randomly reboots every few days, the lights all go out and then cycle again, why is it doing this?
- the motorola mesh app says my satellite is 'offline' but the light on it is solid white, is the app wrong?
- i can't access the admin page at 192.168.10.1 anymore after i changed my wifi name, did i lock myself out?
- i get great speed next to the router but my satellite connection is super slow, what's the point?
- the satellite unit on my mh7023 keeps blinking blue and won't settle, is it broken?
- my phone keeps jumping between the main wifi and the _EXT network from the satellite, how do i make it just use one?
- my motorola mesh router just has a solid red light and nothing connects to it, what do i do?
- smart hub keeps crashing or apps won't load on my samsung tv, just a spinning circle.
- the tv speakers on my qn32q60d make a faint buzzing sound when the volume is low or off.
- can i clean the screen on my qled tv with water? the manual is super vague and i'm scared to ruin it.
- my q60d screen looks weirdly dim or washed out in hdr mode when i play games.
- how do i get rid of the annoying 'no signal' box that pops up every few minutes on my samsung tv?
- the remote for my samsung qled is super laggy or doesn't work unless i'm pointing right at it.
- why does my qn32q60d keep disconnecting from wifi every day? i have to reboot it to reconnect.
- my new samsung q60d tv just shows a black screen but the power light is on, sound works, what gives?
- how do i clean the outside dome without messing up the camera or leaving streaks?
- my camera just randomly reboots every few hours, the lights go out then it comes back online
- the video at night is just a blurry gray fog, i can't see anything clearly even with IR on
- the two lenses are out of sync, the wide angle shows one thing but the zoomed view is pointed somewhere else
- i get a 'SD card error' or it says no SD card found even though i just put one in
- why is there a constant high-pitched whining or buzzing noise coming from the camera housing?
- the auto-tracking is useless, it just spins in circles when a car goes by or completely ignores people
- my trackmix just says 'device offline' in the app no matter what i do, even though the lights are on
- i'm getting error code e2 on the display, what does that mean and how do i fix it
- the display and controls work but the fan and compressor never come on, just sits there set to 'on'
- the pump isn't pumping water out through the hose, it just fills the bucket even though it's set to pump mode
- it's making a loud grinding or rattling noise when the fan runs, sounds awful
- my santa fe classic cw won't turn on at all, no lights, no fan, nothing
- how do i clean the damn coil on this thing, i can see dust and crap all over it through the grille
- the unit is running but not pulling any water out of the air, humidity in my crawl space isn't dropping at all
- my santa fe classic cw just keeps flashing the 'full bucket' light but the bucket is empty and i've checked the float switch
- there's a weird faint vertical line or band down the left side of my screen, only visible on gray or solid backgrounds
- i connected my work laptop via hdmi and my desktop via displayport but the kvm switch isn't working, how do i get it to switch?
- the monitor won't wake up from sleep when i move my mouse, i have to power cycle it every time
- the usb-c port on my aoc u27p2 isn't charging my laptop, it's supposed to deliver 65w right?
- how do i clean the screen on this aoc monitor? the anti glare coating feels weird and i'm scared to ruin it
- my u27p2 makes a faint but noticeable high pitched buzzing or whining noise, is it defective?
- the aoc u27p2 screen looks washed out and colors are really dull straight out of the box, did i get a bad panel?
- my new aoc u27p2 monitor just shows no signal on both hdmi ports, my pc works fine on my old monitor though
- it takes forever to make the first batch of ice, like over an hour, is that normal?
- the water pump is running constantly even when it's not making ice, just a low humming sound
- it keeps flashing the "full" ice basket light even when the basket is completely empty
- how do i clean this thing? the manual says something about a cleaning cycle but i can't get it to start
- the power light is on but the whole thing is just dead, no sounds, no lights for ice size or anything
- it's making a loud grinding or rattling noise when it's trying to drop the ice into the basket
- why is my ice maker suddenly making really thin, hollow ice cubes that melt super fast?
- my costway portable ice maker just arrived but it won't make ice at all, the water pump isn't running
- homepod mini volume buttons on my iphone don't control it anymore, only control phone volume, how do i get it back?
- i get a 'setup failed' error every time i try to add my homepod mini to my home, what gives?
- homepod mini won't play stereo pair properly, one side is quiet or out of sync, how do i fix this?
- my homepod mini just plays a constant static hissing sound when it's idle, is it broken?
- how do you clean a homepod mini? the fabric mesh is getting dusty and i'm scared to ruin it.
- why does my homepod mini keep disconnecting from wifi by itself? it works for a bit then just drops.
- homepod mini randomly gets super hot to the touch, even when it's not playing anything, is that normal?
- my homepod mini is just blinking white and orange and siri won't respond to anything, what's going on?
- dreo fan timer doesn't work right, it just turns off randomly or doesn't turn off when set.
- my dreo fan keeps beeping randomly when i'm not even touching the controls, it's driving me nuts.
- the fan speed seems weak even on the highest setting, not like when it was new. not clogged.
- dreo fan won't turn on, no lights, nothing, but it's plugged in. checked the outlet.
- how do you clean the blades inside a dreo tower fan without breaking it?
- why is my dreo tower fan making a loud clicking or grinding noise when it oscillates?
- dreo fan remote not working at all, tried new batteries and everything, what gives?
- my dreo fan just stopped oscillating, it's stuck pointing one way, how do i fix it?
- my ax3000p router gets really hot to the touch on top, is that safe or should i be worried?
- how do i set up port forwarding on the asus ax3000p? i can't find the virtual server page
- asus router keeps making a faint clicking or buzzing noise, is that normal or is it dying?
- the wifi range on this asus router seems really weak, worse than my old one, is it defective?
- i can't get into my ax3000p router settings anymore, 192.168.50.1 just times out
- the internet speed on my asus rt-ax3000p is way slower than what i'm paying for, even wired
- asus ax3000p keeps randomly dropping the 5ghz wifi signal for all my devices, have to reboot it
- my new asus ax3000p router won't connect to the internet, the light is just solid red, what do i do?
- how do i get the smell of garlic/onion out of the plastic pitcher? it's soaked in.
- the blender just stopped in the middle of crushing ice, now it won't start again, no lights.
- can i put the versa pro blender pitcher in the dishwasher? the manual is gone.
- the touchpad controls on my blender base are not responding, i have to press really hard.
- my versa pro is way louder than it used to be, sounds like a grinding or rattling noise.
- why does my blender leak from the bottom of the pitcher every time i make a smoothie?
- the motor on my versa pro smells like burning plastic after a few seconds on high, what's going on?
- my oster versa pro blender just flashes all the lights and beeps when i plug it in, won't turn on at all.
- can i wall mount the sony ht-s400 soundbar? the manual is confusing and i don't see any brackets in the box.
- the sound from my ht-s400 cuts out for a split second every few minutes, happens on both tv and bluetooth.
- my soundbar keeps switching its input back to tv randomly, cutting off my bluetooth music.
- the display on my ht-s400 is way too bright and lights up my whole room at night, can i dim it or turn it off?
- how do i connect my phone to the sony ht-s400 with bluetooth? i can't get it to show up in my phone's list.
- my soundbar works but the subwoofer isn't making any sound at all, the green light is on though.
- the subwoofer that came with my ht-s400 has a constant low hum even when the soundbar is off, is that normal?
- my sony ht-s400 soundbar just shows a blinking red light and won't turn on no matter what button i press.
- my destiny 1200 just hums loudly but won't move the door, even after pulling the red cord and trying it manually.
- the belt looks loose and sags in the middle, can i just tighten it myself?
- how do i clear all my old remotes from the opener's memory? i lost one and want to start fresh.
- opener works fine on battery backup but not when plugged into AC power.
- door goes down but immediately reverses back up like it hit something, and there's nothing in the way.
- my remote works but the wall console just beeps and won't open the door, even with a fresh battery.
- the opener makes a loud grinding or screeching noise right when it starts or stops moving, but the middle of travel is quiet.
- my destiny 1200 opener just flashes the LED light once and won't move at all, what's the deal?
- the joystick button on the back of my monitor is super hard to press and the menu is laggy, is it broken?
- the text looks kinda blurry or fuzzy on the edges on my g6, is there a sharpness setting or something?
- can i use a monitor arm with the samsung g6? the stand takes up my whole desk
- the hdr on this monitor looks washed out and terrible in windows 11, what am i doing wrong?
- my g6 makes a faint buzzing or whining noise from the back, is this coil whine and is it normal?
- how do i turn off that super bright red power light on the bottom of my odyssey g6? it's like a beacon at night
- the screen on my samsung g6 flickers or goes black for a second randomly, it's driving me nuts
- my odyssey g6 monitor just shows a black screen but the power light is on, anyone know how to fix it?
- the built-in apps like netflix and prime video are super slow and crash all the time, do i need a fire stick now?
- the picture looks really dark and washed out in hdr mode when i watch netflix, is my panel defective?
- the wifi on this tv keeps disconnecting every day, i have to go into settings and reconnect it manually.
- my remote for the 50a6k is super laggy or sometimes doesn't work unless i point it directly at the tv from 2 feet away.
- how do i clean the screen on this thing without ruining it? the microfiber cloth just smears the fingerprints.
- the sound on my hisense cuts out for a second every few minutes, especially on streaming apps, it's driving me nuts.
- tv keeps saying 'no signal' even though my fire stick is plugged in and works on another tv, is the hdmi port broken?
- my hisense 50a6k just shows a solid red light, screen is black, and remote does nothing, what do i do?
- the magnetic mount for my wyze cam og outdoor won't stay put, it keeps sagging or falling off the metal surface.
- i get constant 'motion detected' notifications from my wyze cam og but it's just a shadow or a light changing.
- my wyze cam og's video is just a black screen at night but the infrared leds look like they're on.
- the status light on my wyze cam og is solid blue but the app says it's offline and i can't view it.
- why does my wyze cam og keep going offline every night and coming back in the morning? it's plugged in fine.
- my wyze cam og outdoor is supposed to be waterproof but now there's condensation or fog on the inside of the lens.
- the camera works but the audio on my wyze cam og sounds super distorted and crackly, like a bad radio station.
- my wyze cam og just keeps blinking yellow and won't connect to the app, i've tried resetting it a bunch.
- it smells musty, like a locker room, when it runs. i cleaned the filter but it didn't help.
- i just got this and it won't turn on at all, no lights, no fan, nothing. checked the outlet and it's fine.
- the bucket is full light won't turn off even after i empty it and click it back in place.
- how do i clean the filter on this thing? the manual is long gone and it seems stuck.
- the fan on my frigidaire dehumidifier is running but the compressor won't kick on, just hums for a sec then stops.
- my 70-pint frigidaire dehumidifier is running constantly but the bucket is barely collecting any water, what gives?
- my frigidaire ffad7033r1 just shows a flashing 'ef' on the display and won't start, what's that?
- it says it makes 26 lbs per day but mine seems way slower, takes forever to fill the basket.
- water is leaking from the bottom of the machine onto my counter, not from the drain plug.
- the ice tastes weird or smells like plastic even after a few uses.
- how often do i really need to clean this thing and what's the right way? the manual is confusing.
- it's started making a loud grinding or rattling noise during the cycle, sounds awful.
- the display is flashing 'E1' and it won't do anything. what does e1 mean?
- it's making ice but the cubes are tiny and thin, like slivers. how do i get normal sized cubes?
- my igloo ice maker just arrived and it won't turn on at all, no lights or anything, what's the deal?
- how do i change the wifi network on my aqara hub m2? i got a new router.
- my aqara motion sensor shows motion in the app but doesn't trigger my linked smart bulb anymore, why?
- aqara hub m2 just keeps blinking white and never turns solid, stuck in a loop.
- why is my aqara hub m2 making a faint but high pitched buzzing or whining noise?
- can't add my aqara hub m2 to homekit, the homekit code just never works.
- all my aqara devices keep going offline randomly but the hub m2 light is still white, driving me nuts.
- aqara hub m2 won't discover any of my zigbee sensors, it's like they're not even there.
- my aqara hub m2 just has a solid red light and won't connect to the app, what do i do?
- after a power outage, my shinco portable ac won't turn back on at all, no lights, nothing.
- i set my shinco to a temperature but it never seems to reach it and just runs constantly without shutting off.
- the remote control for my shinco portable ac stopped working, but the buttons on the unit work fine.
- my shinco ac unit is making a loud grinding or rattling noise when the fan is running.
- how do i clean the filter on my shinco sps5-10c? i can't figure out how to get to it.
- the shinco portable ac turns on and the fan works but it's not blowing cold air at all, just room temp air.
- water is leaking out from the bottom of my shinco portable air conditioner onto the floor, not from the drain hose.
- my shinco portable ac is showing E1 on the display and won't start cooling, what does that mean?
- the voice on my roomba combo j9+ is suddenly in a different language and i can't figure out how to change it back.
- i got an alert saying 'clean the charging contacts' but they look fine? it's not docking right.
- the robot keeps getting stuck under my kitchen chairs or cabinet overhang, how do i stop it?
- my j9+ combo's mop is leaving streaks and barely wetting the floor, it's not cleaning anything.
- the self-emptying base on my combo j9+ is making a horrible loud grinding noise when it empties the bin.
- why is my new j9+ combo just bumping into walls and furniture like an old roomba? it's supposed to be smart.
- the j9+ combo keeps getting the error 'robot unable to return to charge' and just dies in the middle of the floor.
- my roomba combo j9+ is stuck saying 'cleaning pad not detected' even though the mop pad is on and clean, what's the deal?
- can i mount this on a vesa arm? the stand takes up so much room and i don't see any screw holes.
- is there a way to make the text look sharper? everything seems a little blurry or fuzzy on this 1080p 27 inch screen.
- the screen keeps going black for a second and then coming back, like it's losing signal, while i'm just working normally.
- how do i clean the screen on this thing? the lg site says not to use glass cleaner but it's just glass right?
- i hear a faint but annoying high-pitched whine or buzz from the back of my monitor, is this normal or should i return it?
- the colors on my lg monitor look really washed out and flat compared to my laptop screen, how do i fix that?
- the power button on my lg 27mq400 feels super mushy and sometimes i have to press it like 5 times to turn it on, is it broken?
- my new lg 27mq400 monitor just says 'no signal' even though my hdmi is plugged into my laptop, what am i missing?
- my ecobee lite makes a faint but annoying high-pitched buzzing sound
- the fan wont run automatically with my heat, it only works if i set it to 'on' manually
- i can't get the ecobee lite to connect during setup, it just spins on 'connecting to server'
- my ac short cycles with the ecobee lite, runs for like 2 minutes then shuts off
- the temperature reading on my ecobee lite is way off compared to other thermometers in the room
- ecobee lite screen is completely blank and unresponsive, no lights at all
- my ecobee lite keeps disconnecting from wifi every few days and i have to reboot it
- ecobee lite says no power to r wire but my old thermostat worked fine, what gives?
- the number pad on my toshiba microwave is getting weird, have to press the 2 button really hard for it to work.
- my toshiba microwave seems weak, takes forever to heat up a cup of water compared to when it was new.
- the clock on my toshiba microwave keeps resetting to 0:00 every time i open the door or after a power blink.
- how do i clean the inside roof of this toshiba microwave? there's a brownish stained panel up there.
- the turntable in my toshiba microwave just stopped spinning. food heats unevenly now.
- my toshiba microwave makes a really loud humming or buzzing noise when it runs, way louder than it used to.
- i press the start button on my toshiba microwave and nothing happens, no light, no fan, display is dead. it's plugged in.
- my toshiba microwave just shows a bunch of F's on the display like F-20 or something and won't start, what is that?
- my rabbit air seems like it's not pulling in any air, the fan feels weak.
- how often am i supposed to wash the pre-filter on the minusa2, and can i use soap?
- the remote control for my rabbit air purifier stopped working suddenly.
- the air quality indicator light on my minusa2 stays on blue even when the room smells bad.
- i can't get my rabbit air to connect to the wifi app no matter what i try.
- there's a weird rattling or buzzing noise coming from my minusa2, especially on high speed.
- i plugged in my rabbit air purifier but it's completely dead, no lights or anything.
- my rabbit air minusa2 is showing a red light and won't run, what's going on?
- my arlo baby won't charge on the dock, the light just pulses white and it dies
- how do i clean the arlo baby camera cover? it's got dried milk spots and i'm scared to ruin it
- the audio on my arlo baby is super quiet even with volume maxed, i can barely hear my baby
- the temperature reading on my arlo baby is always way off, like it says 80 degrees when it's 72
- i can't get the arlo baby to connect during setup, it just flashes amber and never shows up in the app
- why does my arlo baby make a loud clicking noise every few minutes? it's coming from the base.
- the night vision on my arlo baby is super grainy and i can barely see anything, is it broken?
- my arlo baby camera keeps going offline and the app says it's disconnected even though my wifi is fine
- it says 'Replace Ink' for a color but the INKvestment tank still looks half full.
- the paper keeps jamming in the back, right where it feeds in. every single time.
- prints come out with weird horizontal streaks or missing colors, even after cleaning.
- wireless setup is a nightmare, it just won't find my network during installation.
- getting 'Unable to Clean' error 46, how do i fix this?
- why is my scanner making a horrible grinding noise when it tries to move?
- keeps saying 'Ink Tank Full' and won't let me print, but the tanks look fine?
- my brother mfc j4535dw won't turn on at all, no lights, nothing. is it just dead?
- the ‘clean washer’ light is on and won’t go off, even after i ran the cleaning cycle
- it’s super unbalanced on every spin, bangs around even with small loads, i’ve leveled the feet
- the display says ‘nd’ or ‘nF’ and it won’t do anything, just beeps at me
- it’s leaving black or gray greasy streaks on our clothes, especially on lighter loads
- it fills with water super slow, like a trickle, takes forever to start washing
- the washer is making a loud grinding or scraping noise only during the spin cycle, it sounds awful
- my ge gtw720 just keeps blinking ‘pf’ on the display and won’t start a cycle, what does that mean?
- rust is forming on the inside bottom of my genesis ii firebox, under the flavorizer bars
- my weber’s iGrill app won’t connect to the grill, it just times out
- the sear station burner on my e-335 won’t get as hot as it used to, barely any difference
- there’s a loud popping sound from my grill when i turn it on or off, sounds scary
- my weber’s propane tank gauge always says full even when it’s empty, is it broken?
- i get error code er1 on my genesis ii e-335 display, what does that mean?
- the left side of my weber genesis grill is way hotter than the right side, it’s burning everything
- my genesis ii e-335 won’t light, i turn the knob and just hear clicking but no flame
- the third rack on top is sagging in the middle and my tall cups don't fit anymore, can i tighten it?
- my dishwasher is flashing "F7E1" and beeping. what does that mean and how do i make it stop?
- the door latch on my dishwasher won't catch, so i can't start it. i have to hold the door shut with a chair. is this a quick fix?
- why does my whirlpool dishwasher keep stopping mid-cycle and just sit there with the time remaining displayed? it's not flashing any errors.
- my dishwasher is leaving a gritty white film on all my glasses and plates after a cycle, even with rinse aid full.
- the control panel on my whirlpool dishwasher is completely dead, no lights, no response, but i can hear a faint hum from inside. help?
- my whirlpool dishwasher just says "clean filter" and won't start any cycle, i already rinsed the filter what gives?
- my berkey lower chamber has white spots or a chalky film on the outside, especially near the bottom, what is that?
- the black berkey filter stem cracked where it screws into the bottom chamber, can i fix this or do i need a whole new filter?
- the water from my berkey tastes kind of flat or weird, not like fresh filtered water, it's been a few months.
- my berkey upper chamber is overflowing, water is going over the rim instead of going through the filters, what's wrong?
- the spigot on my big berkey is leaking where the handle meets the spout, it drips even when closed.
- i see little black specks or a grayish dust in my filtered water after installing new berkey filters, is this bad?
- water is taking forever to filter through my berkey, like a drop every few seconds, it didn't used to be this slow.
- my big berkey filters are leaking around the black rubber grommet where they screw into the bottom chamber, i just set it up and water is dripping out.
- the control panel on my ge profile fridge is unresponsive, buttons don't do anything or lights are all on
- my fridge is running non-stop and not getting cold enough, especially in the fresh food section
- i hear a constant humming or buzzing from the bottom of my fridge, it's not the normal compressor sound
- the interior lights in my fridge just went out, but everything else is working fine and cold
- the freezer drawer on my ge profile is ridiculously hard to open, feels like it's stuck or frozen shut
- my ge french door fridge is beeping randomly in the middle of the night and the display says 'door open' but all doors are shut tight
- the water dispenser on my pvd28bynfs is really slow, just a trickle, but the ice maker seems okay
- my ge profile fridge is making a loud clicking or tapping noise every few minutes, sounds like it's coming from the back
- how do you even clean the camera lens on the v43 without smudging it or breaking it? it's got all these little holes around it.
- my monitor keeps freezing, the image just sticks and i have to power cycle it to get it back.
- there's a high pitched whining or buzzing sound coming from the camera, you can hear it on the parent unit audio.
- the parent unit battery drains super fast, like it only lasts an hour off the charger when it's supposed to last all night.
- i can't get the split screen to work on my monitor, it just shows one camera big even though i have two cameras set up.
- the night vision on my camera looks really grainy and awful, like it's all static, but the daytime picture is fine.
- the parent unit on my v43 beeps constantly for no reason, like every 30 seconds, and it's driving me nuts.
- my babysense v43 monitor screen is just completely black and won’t show anything, but the power light is on.
- the fan speed button doesn't change anything, it's stuck on one speed
- the overheat protection light came on and it shut off, now it won't turn back on
- the thermostat is terrible, it cycles on and off constantly even when the room is cold
- how do you clean this thing? the grills look dusty but i'm scared to break it
- the remote for my dq2088 stopped working, do i need special batteries?
- my ceramic tower heater is making a loud clicking or popping noise when it heats up
- heater turns on but no heat comes out, just the fan blowing cold air
- my amazon basics tower heater just stopped turning on, no lights, nothing at all
- copies and scans from the printer glass come out with a weird yellow or pink tint, colors are all wrong.
- my et-2850 won't turn on at all, no lights, no sounds, nothing. it was working yesterday.
- the scanner on my et-2850 makes a loud clunking sound and says 'scanner error' when i try to copy or scan.
- i'm getting streaks and lines missing in my prints on the epson ecotank, the nozzle check pattern looks terrible.
- setup was fine but now my computer and phone just won't find the epson et-2850 on wifi anymore.
- my et-2850 makes this horrible loud grinding noise every time it tries to feed paper.
- the ink levels on my ecotank et-2850 always show empty even right after i refilled the tanks, what gives?
- my brand new epson et-2850 is set up but the screen just says 'paper jam' and there's no paper stuck anywhere.
- my washer makes a loud grinding or scraping noise, only when the drum is spinning. it's not the shipping bolts.
- i'm getting an 'ie' error on my lg washer, sometimes with a clicking sound. water does come in though.
- the wash cycle on my lg takes forever, like 3 hours for a normal load, is that normal?
- my washer just beeps at me and won't start, the door is definitely shut. what's it trying to say?
- there's a musty smell coming from my lg front load washer, i run the tub clean cycle but it comes right back.
- why does my lg smart washer show as offline in the thinq app all the time? it connects to wifi but then drops.
- just installed my new lg front loader and it's violently shaking and banging on the spin cycle, did i get a lemon?
- my lg wm6700hba keeps showing the 'oe' code after every wash, what gives?
- the auger on my 700 won't turn at all, no sound or movement, but the control panel lights up.
- the lid on my recteq won't seal tight anymore, smoke just pours out the sides.
- grease is leaking from the bottom of my bull, not going into the bucket like it should.
- there's a loud clicking or grinding noise coming from the hopper area when it's running.
- i'm getting huge temperature swings, like +/- 50 degrees, on my rt-700. it never used to do this.
- my recteq won't connect to the app anymore, it just says offline on my phone.
- the fan on my bull is running nonstop even after shutdown, is that normal?
- my recteq 700 just flashes 'ERR' and beeps, won't start up, what's that mean?
- it just stopped mid-cycle and now the drain pump seems to be running continuously, a humming sound from the bottom.
- the touch buttons on the front panel are really unresponsive, i have to press them super hard or multiple times.
- dishes are still wet and streaky at the end of the cycle, even on the extra dry setting.
- the display just flashes and it beeps three times when i try to start it, then nothing happens.
- it's making a really loud grinding or rattling noise during the wash cycle, sounds like it's coming from the bottom.
- my beko dishwasher leaves a white, chalky powder all over everything, especially glasses. what is that?
- the door on my beko dishwasher won't stay closed, it just pops open during a cycle and everything stops.
- my beko dishwasher just shows three dashes '---' on the display and won't start, what's that about?
- the electronic light on my pur faucet filter just doesn't come on at all, even with a new battery.
- no water comes out on the filtered setting, but unfiltered works fine from my faucet.
- the pur filter won't snap into the housing, it just spins and doesn't lock, even though it's the right model.
- the filter handle is super stiff and hard to switch from filtered to unfiltered water on my pur faucet mount.
- my water tastes weird or kinda plastic-y even with the new pur faucet filter, did i get a bad one?
- the filter light on my pur faucet mount is flashing red and blue alternately, what does that mean?
- water is leaking from where the pur filter connects to my faucet, it drips down the side of the base.
- my pur faucet filter light is solid red and the water stream is really slow, just installed a new filter too.
- the night vision is really grainy and the image is almost black and white with weird green tints, is my camera defective?
- i'm getting a 'cannot connect to server' error in the app and can't see the live stream, everything else on my phone has internet
- the camera gets really hot to the touch, especially near the top, is that normal or a fire hazard?
- the rollover detection alert never goes off, even when we test it with a doll, is it broken?
- the cry detection isn't working at all, or it goes off for random noises like the humidifier
- how do you clean the cubo ai plus camera? the manual says not to use liquids but it gets dusty and has fingerprints
- the camera says 'face covered' alert constantly even when there's nothing near the baby's face, it's driving us nuts
- my cubo ai plus camera keeps going offline and i have to unplug it to get it back, happening like every other day
- the fan inside makes a buzzing or grinding noise, especially on the low heat setting.
- can you use an extension cord with this space heater? mine keeps tripping when i plug it into one.
- the power button on my tt-he004 feels stuck or doesn't click anymore, but the touch controls still work.
- how do you clean this thing? the manual is useless and i don't want to break it.
- the heater randomly shuts off after running for a while, and the power light goes out.
- my taotronics heater smells like burning plastic or dust every time i start it, is this normal?
- the heater turns on but the fan runs and no heat comes out, just cold air.
- my taotronics heater just keeps beeping when i try to turn it on, but it won't actually start heating.
- is it normal for the fezibo desk to wobble a bit at standing height? i have it on carpet.
- fezibo desk just randomly goes up or down by itself a tiny bit sometimes, like it's ghost pressing the buttons.
- my desk won't go all the way to the saved height memory, it stops about an inch short now.
- fezibo desk makes a loud clunking noise at the very start of going up, then is fine. should i be worried?
- how do you clean the fezibo bamboo top without ruining it? the manual is useless.
- just set up my fezibo 48x24 and one side goes up before the other, making the top tilt. is it broken?
- fezibo desk remote is totally dead, no lights, tried new batteries. is the whole control box fried?
- my fezibo standing desk just beeps three times and won't go up or down, what's the deal?
- filled the ink tanks but now it's leaking blue ink inside the printer
- trying to scan from the flatbed and it just says 'check document cover' won't start
- my computer says the printer is offline even though it's on and connected to wifi
- the black text from my g7020 looks faded or has streaks even after cleaning
- printer says 'support code 6000' and the orange light is flashing, can't do anything
- set up my pixma g7020 but it won't connect to wifi, just keeps failing
- canon g7020 making a loud grinding noise when it tries to print, like it's stuck
- my new g7020 says it's out of cyan ink but i just filled the tank and it's full, what gives?
- it's not agitating, the drum just sits there or maybe turns slowly once, but it still fills and drains.
- the digital display is completely blank, no lights, no response, like it's dead.
- how do i clean this thing? it's starting to smell musty and there's gunk around the inside of the lid.
- it just beeps three times and won't do anything when i press start, no error code.
- the lid lock just clicks repeatedly and won't engage, so the washer won't start at all.
- my washer makes a loud grinding or thumping noise only during the spin cycle, it's shaking the floor.
- suddenly getting an 'IE' error on my samsung washer, it fills super slow or not at all.
- my samsung top loader just shows '5E' on the display and won't drain, it's full of water.
- the hard cover for my 36 inch is warping and doesn't sit flat anymore after leaving it outside
- i get a loud popping sound from the burners sometimes when lighting, is that dangerous
- the magnetic lid holder on my blackstone won't hold the lid, it just falls off
- my griddle has a huge hot spot in the middle and the front edge stays way cooler, is this normal
- the grease trap on my 36 inch is overflowing, it drips down the leg no matter how empty i keep it
- how do i stop my blackstone from getting rust spots after i season it, i followed the videos
- just assembled my blackstone 36 and one of the burners won't light at all, no click or flame
- my blackstone 36 inch griddle won't get hot enough, it's barely sizzling even on high
- dishes are coming out with white, chalky residue all over them, especially glasses.
- the screen on the front just says 'remote' and i can't make it do anything with the buttons.
- the door won't latch shut unless i really slam it hard, and sometimes it pops open mid-cycle.
- the 'sanitized' light never comes on even after running a sani-rinse cycle. is it broken?
- it's making a loud grinding noise during the wash cycle, sounds like it's coming from the bottom.
- the third rack on top barely gets anything wet, everything comes out bone dry and still dirty.
- dishwasher is flashing 'E24' on the display and won't start a cycle. what does that mean?
- my thermador star sapphire dishwasher won't turn on at all, no lights, nothing. it's plugged in and the breaker is fine.
- the plastic filter housing is looking cloudy and gross inside, can i clean it or do i just live with it?
- water tastes kinda weird or flat after installing a new aquasana filter, almost worse than before.
- my filter's power adapter has a green light but the unit itself has no lights at all, not even red. is it dead?
- changed the filter cartridge but now the housing is leaking from the bottom seam where it screws on.
- the red bypass lever on my aq-5200 is super stiff, i'm afraid i'm gonna break it trying to turn it to change the filter.
- is it normal for the aquasana filter to make a gurgling or humming sound sometimes? happens when i first turn the faucet on.
- installed my under sink filter but the dedicated faucet has really low water pressure, barely a stream.
- my aquasana aq-5200 filter light is flashing red after like 3 months, it's supposed to last six, what gives?
- the heater works but smells like hot plastic or burning dust, should i be worried
- my heater's digital display is flickering or showing weird segments, is it dying
- the power light is on but the heater won't turn on with the remote, only the buttons work
- how do you clean the dust out of a pelonis oil radiator, the fins look packed
- the tip-over switch on my heater is too sensitive, it shuts off if i barely nudge it
- is it normal for my pelonis oil heater to make clicking and popping noises
- the heater turns on and seems to work but it's not putting out any heat, just blowing lukewarm air
- my pelonis radiator heater just beeps three times when i try to turn it on and then does nothing
- can i use a monitor arm clamp with the bamboo top? i'm scared it'll crack it.
- the control panel on my jarvis is totally dead, no lights, nothing. desk is plugged in.
- my desk moves up but then immediately goes back down a little bit on its own when it stops.
- i spilled coffee on my bamboo desktop, what's the best way to clean it without ruining the finish?
- the motors on my jarvis are making a loud grinding or clicking noise when it moves.
- how do i reset the memory presets on my jarvis handset? it's all messed up.
- my bamboo jarvis desk wobbles side to side a lot when it's up high, is this normal?
- my jarvis desk won't go up or down at all, the screen just flashes and beeps once when i press the buttons.
- water is leaking pretty bad from the bottom of the pump, near where the hoses connect, not from a hose itself
- the pressure control dial on the handle spins but doesn't seem to change the spray power at all
- the unit keeps shutting off by itself after a few minutes, then the red overheat light comes on
- can't get the soap setting to actually suck up detergent, it just sprays plain water
- the digital screen on my pressure washer is completely blank, but i can hear the machine running if i pull the trigger
- my epx3100 makes a really loud knocking or banging sound when i'm using it, sounds like it's gonna blow up
- the pressure washer turns on and water comes out, but it won't build any pressure, just dribbles out like a garden hose
- my new westinghouse epx3100 just flashes 'E02' on the screen and won't start, i can't even find that code in the little book
- it's printing super slow, like it pauses for several seconds between each line on a document.
- my printer just shows a solid blue screen or a blank screen after being idle, buttons do nothing.
- the scanner on my 7602 makes a loud thunk and won't move, it's just stuck on the left side.
- all my prints have faint horizontal lines or gaps in the text, i've done a cleaning cycle but it comes back.
- why does my smart tank make a loud grinding or crunching noise when it starts up or prints?
- i just set up my 7602 and it won't connect to wifi, the light just blinks and it fails every time.
- printer says 'paper jam' but i've checked everywhere and there's no paper stuck, how do i clear this?
- my hp smart tank 7602 is showing a black ink error and won't print even though the tank looks full, what gives?
- washer takes forever to fill or doesn't seem to get enough water, clothes come out dry
- door won't lock on my maytag front loader, it just beeps and won't start a wash
- my maytag walks across the floor and shakes violently on high spin, how do i stop it?
- water won't drain out of my maytag at the end of the cycle, it's just full and stuck
- there's black mold and a mildew smell in the rubber door seal of my maytag mhw5630hw
- my washer makes a loud grinding or scraping noise only during the spin cycle, what's wrong?
- pressed start on my maytag front loader and nothing happens, no lights or sounds at all
- my maytag mhw5630hw is showing f5 e1 and just stops mid-cycle, how do i fix it?
- the grease drain hole on my highland gets clogged instantly, grease just pools on the bottom plate. what's the trick?
- i followed the instructions for seasoning but now the inside of my cook chamber has these orange rust streaks, did i mess up?
- my smokestack is rattling like crazy in the wind, how do i get it to shut up?
- the paint on my firebox is bubbling and peeling after a few hot fires, is that normal?
- i can't get my highland reverse flow plate clean, it's got this crusty black stuff welded on from the last brisket.
- the temperature gauge on the lid of my highland is reading way lower than my digital probe, which one should i trust?
- just assembled my highland reverse flow and the firebox door is crazy tight, like i have to yank it open. did i put it on wrong?
- my oklahoma joe highland smoker leaks a ton of smoke from the door and chimney connection, can't hold temp at all.
- after a cycle, the inside of my miele still smells musty, like wet towels. i run the cleaning tablet monthly. what else can i do?
- the autodos status light is flashing yellow, not green or red. the app just says 'check autodos'. what does yellow mean?
- there's a loud grinding noise coming from the bottom during the wash cycle, sounds like metal on metal. is the pump going out?
- i keep getting an f16 error code on the display and the cycle stops. what does that mean and how do i clear it?
- the display on my g7566scvi is completely dark, no lights, no response to buttons, but i can hear a faint hum from inside. is it dead?
- my miele dishwasher with autodos leaves a white, powdery film on everything, especially glasses. i thought this thing was supposed to prevent that.
- the autodos cartridge is stuck in my miele dishwasher, the little door won't open to let me put a new one in. how do i force it?
- my new miele g7566 won't connect to the miele app, the wifi light just blinks red forever. what am i doing wrong?
- i replaced all my filters but now the water tastes kinda flat or even worse than before, did i do something wrong?
- my system seems to be draining water constantly, like i can hear it running to the drain pipe non-stop, even when the tank is full.
- the water from my alk remineralization filter tastes weird, kinda chalky or metallic, is that normal?
- i see a puddle under the unit and it seems to be coming from the bottom of the filter housings, did i not screw them on tight enough?
- my system’s tank doesn’t seem to fill all the way, it feels light even after hours, and the water just trickles out.
- the faucet on my ispring system is making a loud clicking or chattering noise when i turn it on, sounds awful, is it broken?
- just installed my rcc7ak and now there’s a constant slow drip from the faucet base where it comes through the sink, how do i stop it?
- my ispring rcc7ak water pressure seems super weak after a few months, like it takes forever to fill a glass, what’s up with that?
- the keypad on my branch desk is totally dead, no lights, but the desk still works if i plug the motor directly to power?
- i'm trying to put a monitor arm on my branch desk but i'm scared of clamping into the cable management channel
- the anti-collision on my branch desk is way too sensitive, it reverses if it barely touches a cable
- my desk keeps going down by itself a little bit overnight, like an inch or two, it's not where i left it
- how do you clean the white laminate top on the branch desk without damaging it? i got some pen marks on mine
- the memory presets on my branch desk keypad stopped working, it just beeps and won't save my height
- just assembled my branch standing desk and it's wobbling side to side a lot when it's up high, is this normal?
- my branch desk won't go up or down, the motor just makes a loud humming noise and nothing happens
- the cord reel on my k1700 is super stiff and won’t retract the power cord anymore.
- the detergent suction tube isn’t pulling soap, i just get plain water even with the dial turned to soap.
- i get pulsating or surging pressure, it’s not a steady stream, it pulses hard then soft.
- the trigger gun on my k1700 is stuck closed, i can’t squeeze it to release pressure.
- the machine turns on and runs but shuts off by itself after like 30 seconds, then the green light just blinks.
- my pressure washer leaks water from the bottom of the pump housing as soon as i turn the water on, before i even start it.
- the pressure is super weak on my k1700, like it’s just dribbling out even with the turbo nozzle.
- my karcher k1700 just hums and won’t build any pressure when i pull the trigger, what’s the deal?
- the door latch feels loose and sometimes i have to slam it to get the dryer to start.
- getting an F01 error code on the display, can't start any cycle.
- how do i clean the moisture sensor strips inside the drum? they look gross and i think it's messing up the auto-dry cycles.
- the wi-fi connection keeps dropping, won't stay connected to the smartthings app.
- clothes are still damp after a full cycle, takes like 2 or 3 runs to get anything dry.
- it's making a loud scraping or squealing noise, only when the drum is turning.
- the display on my gfd55essnww is completely blank, no lights, nothing. won't start at all.
- my ge smart dryer just says 'check vent' and stops after a few minutes, what does that mean?
- it says 'paper jam' but i've opened everything and there's no paper stuck anywhere, it just won't clear
- colors are way off, blues look purple and skin tones look green, i just replaced all the toners
- printer is on but the screen is completely blank, no lights, nothing, but i can hear the fan running inside
- printed pages have a weird repeating smudge or ghost image about every 3 inches down the page
- my brother color laser is making a loud grinding noise from the back every time it starts a print job
- setup keeps failing on wifi, my brother printer finds the network but won't connect, it just times out
- printer says 'toner life end' for black even though the cartridge looks full, can i just keep using it?
- my brother l3280cdw just shows 'replace drum' on the screen and won't print anything, i just put new toner in
- clothes are coming out soaking wet at the end of the cycle, like the spin didn't work at all
- washer won't power on at all, no lights on the display, checked the outlet and it's fine
- the display just says 'i-DOS' and it won't let me select a normal cycle, what does that mean?
- my washer smells musty, especially right when i open the door, even though i run clean cycles
- the door on my bosch front loader won't seal right anymore, there's a gap and it leaks a little water onto the floor
- getting an E16 error code on the display and the machine won't start or stops mid-cycle
- washer is making a loud grinding or rumbling noise only during the spin cycle, sounds like it's going to walk away
- my bosch 800 series washer just shows a padlock symbol on the display and won't let me open the door or start a cycle
- the wheels on my grill are totally seized up and won't turn, how do i move this thing now?
- i smell gas around my grill even when the knobs are off, is that dangerous?
- the side burner on my performance grill won't stay lit, it goes out as soon as i let go of the knob
- my grill takes forever to get up to like 400 degrees, it used to heat up way faster
- rust is forming really fast on the bottom of the firebox and the grease tray, is this normal?
- the temperature on my grill is all over the place, it won't hold a steady heat even on low
- one burner on my performance series grill flames up really high and yellow, the others are fine, what's up with that?
- my char broil performance grill won't light at all, i turn the knob and just get a clicking sound but no flame
- the third rack on top won't slide smoothly, it feels like it's catching or grinding on something.
- dishes are still wet and spotted at the end of the cycle, even with rinse aid full and using the sanitize or high temp option.
- it's making a loud grinding or rattling noise during the wash cycle, sounds like it's coming from the bottom.
- the 'wi-fi' light just keeps blinking blue forever on my dw80r9950us, i can't get it to connect to my phone.
- my dishwasher door won't latch shut all of a sudden, it just bounces back open when i try to close it.
- the bottom of my samsung dishwasher is full of standing water after a cycle, it never seems to drain all the way.
- my samsung dw80r9950us just shows '3c' on the display and won't start a cycle, what does that mean?
- i get a 'flow error' message on the screen and it stops making water. drain line seems to be flowing fine.
- the system keeps turning on by itself every few hours even when we're not using any water.
- water is leaking from the bottom of the unit, seems like it's coming from around the filter housings.
- the smart app won't connect to my g3p800, it just spins forever trying to find the device.
- the tds reading on my screen is still high, like over 50, even with new ro membranes. tastes fine though.
- my waterdrop is making a loud humming or buzzing sound that doesn't stop, it's driving me nuts.
- the faucet light on my g3 is solid red and no water comes out, not even the drain line seems active.
- my waterdrop g3p800 screen just says 'filter life expired' but i literally just installed new filters, what gives?
- my pressure washer makes a really loud knocking or banging sound from the pump when it's running.
- engine starts and runs okay but there's no pressure at the gun, just a garden hose stream. simpson megashot.
- the unloader valve on my ms3125 is leaking water really bad from the sides when i'm using it.
- my megashot won't start at all, not even a sputter. i checked for spark and it's good, gas is fresh.
- oil is leaking from the bottom of the pump on my simpson, looks like it's coming from a little plug. is that bad?
- pressure washer surges and pulses really bad, can't hold a steady stream. it's a megashot 3125.
- just got my ms3125 and it runs for a minute then dies like it's out of gas, but the tank is full.
- my simpson megashot starts fine but the pump just hums and won't build any pressure, what gives?
- the sensor dry cycles always leave clothes damp, i have to run it twice. what's the point of the sensor?
- getting an f7 e1 error code, can't find it in the little manual. dryer just stops.
- door won't latch shut properly, i have to really slam it and sometimes it still pops open mid-cycle.
- trying to connect it to the maytag app but it just won't find the dryer during setup. wifi in the laundry room is fine.
- the 'check filter' light won't turn off even after i've cleaned the lint screen completely.
- it's making a loud thumping or grinding noise, sounds like it's coming from the back. just started today.
- dryer is running but not heating at all, clothes are just tumbling damp. my model is the med6230rhw.
- my maytag smart dryer just shows 'pf' on the screen and won't start, what does that even mean?
- my revlon one-step 2.0 smells like burning plastic or electronics every time i use it now
- the barrel of my one-step is wobbling where it connects to the handle, is it going to break off?
- how do i clean the bristles on the revlon one-step? they're full of hair and product gunk
- the revlon one-step 2.0 gets way too hot on my hair even on the low setting, it feels like it's burning
- my hair keeps getting sucked into the back of the revlon one-step brush, it's tearing and snapping my hair
- the cool shot button on my volumizer plus doesn't stay on when i press it, i have to hold it down
- why does my revlon one-step 2.0 make a loud grinding noise when i turn it on? sounds like something's stuck
- my revlon one-step 2.0 just stopped turning on, no lights or anything, i've only had it a few months
- how do i clean the inside? there's toner dust everywhere and i'm worried it'll mess up my prints.
- it keeps jamming every single time, paper stops right inside the front door before it gets to the toner.
- printer just won't power on at all, no lights, no sound, checked the outlet and it's fine.
- getting faint, streaky prints or lines down the page, already swapped the toner and it didn't help.
- trying to connect it to wifi and it just won't find my network during setup, the wizard keeps failing.
- it's making a horrible grinding or screeching noise from the back right side every time it picks up paper.
- printer says 'replace toner' with the orange light but the cartridge is definitely not empty, how do i reset it?
- my lbp236dw just shows 'error e748' and won't print anything, what does that even mean?
- the control knob feels loose and sometimes skips past the cycle i want to select.
- it won't drain at all, just sits full of water at the end of a cycle.
- the washer shakes violently and walks across the floor during the spin cycle.
- water keeps filling into the tub even when the washer is off, it's slowly leaking onto the floor.
- clothes are sopping wet at the end of the cycle, like the spin never happened.
- the washer fills up with water but then just sits there, doesn't agitate at all.
- washer is making a loud grinding noise only on the spin cycle, sounds like metal on metal.
- my amana ntw4516fw washer just beeps at me and won't start a cycle, the lid is closed and it's plugged in.
- the controller screen on my dlx is blank, but the grill seems to have power, any ideas?
- i get almost no smoke flavor on the low smoke setting, is my grill defective?
- the slide and grill feature isn't getting searing hot, it's just kinda warm, what gives?
- how do i stop grease fires in my camp chef dlx, it flared up bad last time?
- pellet grill won't feed pellets, the auger isn't turning at all, what do i check?
- the fan on my dlx is making a loud grinding or rattling noise, is it broken?
- why is my smoke pro dlx not getting up to temperature, it just hovers way below the set point?
- my camp chef dlx says 'err' and shuts down after a few minutes, what's going on?
- the upper rack spray arm isn't spinning or has really weak water pressure
- the heated dry doesn't seem to work, everything is still soaking wet at the end of a cycle
- water is sitting in the bottom of the tub after a cycle finishes, it's not draining all the way
- the clean light on my whirlpool wdf520padm is just blinking and it won't start, i already tried the power button
- my whirlpool dishwasher beeps three times and then just stops in the middle of a cycle, what gives?
- i get a burst of air or sputtering water every time i first open the apec faucet
- my water pressure is fine but the ro system seems to produce water super slow
- the faucet on my apec system is leaking around the base where it meets the counter
- there's a puddle of water under my apec roes-50, how do i find the leak?
- my apec ro system tank seems to have low pressure, water just dribbles out of the faucet
- the water from my apec system tastes weird or has a bad odor after i changed the filters
- just installed my apec roes-50 and the tank won't fill up at all, zero water coming out
- my apec roes-50 system is making a constant hissing sound from the drain line, is that normal?
- how do i get the stupid 'clean filter' light to turn off on my whirlpool dryer? i've cleaned it a bunch
- it's making a high-pitched squealing or squeaking noise, only when the drum is spinning
- dryer drum spins but no heat at all, clothes are just cold and damp. whirlpool electric vented
- the lint filter on my wed5000dw feels like it's barely catching anything, and i see lint in the drum after a cycle
- suddenly getting an f01 error code on my whirlpool dryer, what does that mean?
- the dryer heats but it takes forever to dry clothes, like two or three cycles. wed5000dw
- dryer makes a loud thumping noise like a shoe is in there, but it's empty. whirlpool wed5000dw
- my whirlpool wed5000dw dryer just beeps and won't start at all, the lights are on but nothing happens when i press start
- dyson dryer works but the air doesn't feel as powerful as it used to, even on the max setting
- the magnetic filter on my hd08 won't click back in securely, it just falls off now
- my dyson dryer smells like burning plastic or hot electronics when i use it, is it going to catch fire?
- how do you actually clean the inside of the dyson dryer nozzle? i see dust and lint in there and can't get it out
- the cold shot button on my supersonic is stuck down and won't stay popped out, air is always cold now
- why does my dyson dryer keep cutting off after a few minutes on the highest heat setting? it just goes cold.
- dyson hair dryer making a high pitched whining or grinding noise, sounds like a bearing is shot
- my dyson supersonic just stopped turning on out of nowhere, the light doesn't even come on when i plug it in
- my oven temperature is way off, like cookies burn at 350 or take forever to bake, how do i calibrate it?
- the oven light won't turn on when i open the door, and the button on the control panel doesn't work either.
- after self clean, my ge oven smells like burning plastic or chemicals when i try to bake something.
- my oven makes a loud humming or buzzing noise when it's on, not the fan, like an electrical sound.
- one of my electric burners heats up super slow and stays on low even when i turn it to high.
- the clock and timer on my ge range keep resetting themselves randomly, even though it's plugged in.
- the self-clean on my ge oven ran but now it won't unlock and the door won't open, how do i get it open?
- my ge jb645 oven won't heat up at all, the display is on and the timer works but no heat.
- all my prints have a faint repeated ghost image of something from a previous page in the background.
- getting a 'scanning system error 21' message on the screen and it won't scan or copy.
- it randomly goes offline on the network, and the only way to get it back is to power cycle it.
- scans come out super dark or have weird shadows on them when using the flatbed glass.
- it says 'toner is low' for one color but it's a brand new cartridge, and now prints have streaks.
- the printer makes a horrible grinding noise from the back whenever i try to print or copy anything.
- i keep getting 'incorrect paper size' errors on the screen even though the tray is loaded correctly with letter paper.
- my hp m283fdw printer just shows 'scanning for networks' forever and never finds my wifi, i'm stuck.
- the wash cycles on my electrolux are taking way longer than the display said they would, like hours longer.
- water is leaking from the bottom front of my electrolux washer, where's it coming from?
- i keep getting suds error on my electrolux, but i'm using he detergent, what am i doing wrong?
- my washer just beeps three times and won't start when i press play, what's the deal?
- the door on my electrolux washer won't unlock after the cycle finishes, how do i get my clothes out?
- why does my electrolux washer smell like mildew even after i run a clean cycle?
- my electrolux washer makes a loud grinding or scraping noise only during the spin cycle, is it broken?
- my electrolux front loader is just showing f01 on the screen and won't do anything, what does that mean?
- pit boss app won't connect to my austin xl, just spins forever. bluetooth light is solid.
- the slide plate for direct flame searing is completely stuck, won't budge at all.
- my auger is making a loud grinding noise and now it's jammed and won't feed pellets.
- how do i stop the damn grease drain cup from leaking all over my patio?
- the temp swings on my austin xl are crazy, like +/- 50 degrees from what i set it to.
- why is there smoke pouring out from under the hopper lid and around the control panel?
- the startup cycle on my austin xl just keeps going and never gets up to temp, stuck at like 150 degrees.
- my pit boss austin xl keeps shutting off mid-cook and the display goes blank, what gives?
- the interior light stays on all the time even with the door closed, how do i turn it off?
- the smartthinq app won’t connect to my lg dishwasher, it just keeps searching forever.
- it’s making a loud grinding or buzzing noise, mostly during the drain part of the cycle.
- the control panel on my ldp6810ss is totally dead, no lights or response.
- my dishes are coming out with white chalky film or spots, especially on glasses.
- the quadwash arms in my lg dishwasher aren’t spinning at all during the cycle.
- water just sits in the bottom of my lg dishwasher after a cycle, it won’t drain.
- my lg ldp6810ss dishwasher just beeps three times and won’t start a cycle, what’s the deal?
- just set up my new hub instant and the water flow is super slow, like a trickle, what did i do wrong?
- my hub instant keeps turning itself off randomly, even when plugged in and full of water.
- how do i clean the inside of the hub? water tastes a bit plastic-y or stale after a few weeks.
- the touch screen on my brita hub is going crazy, registering touches i'm not making or not responding.
- i set my hub to 190 degrees but the water coming out is barely warm, not hot at all.
- why is my brita hub making a loud gurgling or humming noise when it's just sitting there idle?
- the screen on my hub instant just says 'filter' and won't let me do anything else, how do i get past it?
- my brita hub instant just shows a red light and beeps but won’t start heating, what’s the deal?
- the airwrap turns on for a second, makes a click, and shuts off. it won't run at all now.
- i just got my airwrap and the power cord feels weirdly stiff and won't stay coiled, it's always tangled.
- the long barrel attachment for curls gets too hot to touch near the base, is that normal?
- my airwrap turns on but the attachments won't spin, they just sit there blowing air.
- hair keeps getting sucked up and tangled in the round brush attachment, it's a nightmare to clean.
- the cool shot button on my airwrap doesn't do anything, air stays hot. is it broken?
- why does my dyson airwrap make a loud rattling noise when i turn it on? it sounds broken.
- my airwrap just flashes blue and then turns off, i can't get it to stay on for more than a second.
- my oven makes a loud buzzing or humming sound when it's on, not the fan, but like an electrical noise.
- the clock on my samsung range keeps resetting to 12:00 every time i turn it off.
- my oven temperature is way off, like 50 degrees according to my thermometer, how do i fix this?
- the large burner on my samsung cooktop clicks forever but won't light, the others work fine.
- after a self clean, my samsung oven won't turn back on, the display is just blank.
- my samsung oven door is super hard to close, i have to slam it and it still doesn't always latch.
- the touch controls on my ne63a6511ss are going crazy, turning burners on by themselves, is this a known thing?
- my samsung ne63 range just shows f3e0 on the display and won't heat, what is this?
- my gaming pc wired into the axe75 gets lag spikes even though the internet is fine on other devices.
- i factory reset my axe75 and now it's creating a wifi network called 'TP-Link_XXXX' but i can't set it up, the app won't find it.
- the led lights on my axe75 are way too bright for my bedroom, can i turn them off completely?
- the internet speed on my wifi 6e devices is way slower than my old router, even right next to the axe75.
- i can't access tplinkwifi.net or 192.168.1.1 to get into my axe75 settings anymore.
- my axe75 router randomly reboots itself every day or two, it's driving me nuts.
- the 6ghz band on my axe75 just vanished from the list of networks on my phone, i can't see it anymore.
- my archer axe75 keeps blinking orange on the internet light and won't get online, i've rebooted a bunch of times.
- my lg c3 keeps disconnecting from wifi, especially when i'm streaming 4k, do i need a new router?
- how do i clean the screen on my c3 without ruining it? the microfiber cloth just seems to smear fingerprints.
- the screen on my c3 looks kinda dim in hdr mode even in a dark room, did i get a bad panel or is there a setting?
- i'm getting this 'no signal' screen randomly on my c3 even though my ps5 is on and working, happens a lot when switching games.
- the magic remote for my c3 is super laggy and unresponsive, especially the pointer, is the remote bad?
- my lg c3 keeps asking me to run pixel cleaning every time i turn it off, how do i make it stop?
- just got my c3 and there's a weird high-pitched whine or buzzing coming from the back, especially in dark scenes, is this normal?
- my lg c3 won't turn on at all, the red standby light is on but screen is totally dead, what gives?
- i set up my new arlo xl but it won't record any video clips, it just shows a thumbnail for motion events.
- how do i clean the lens on my arlo spotlight camera without smearing it or damaging the weatherproofing?
- arlo app says my camera has a 'siren disabled' error and it won't play the siren sound when i trigger it manually.
- the battery on my essential xl says it's fully charged but dies way faster than the '3-6 months' it advertised.
- my arlo xl camera's live view takes forever to load or just says 'stream unavailable', but everything else on my wifi is fine.
- i get a 'motion detection is disabled' notification constantly even though i have it turned on in the app.
- the spotlight on my arlo xl turns on for motion but then it just stays on all night, draining the battery in like two days.
- my arlo essential xl spotlight camera is offline in the app and just has a solid amber light, how do i get it back online?
- my dehumidifier keeps turning itself on and off randomly every few minutes, not reaching the target humidity.
- how do i clean the filter on this thing? the manual is useless and i can't figure out how to get to it.
- it's running constantly but not pulling any water out of the air, bucket stays dry.
- the display on my ge dehumidifier is completely blank, no lights, but i can hear the fan running.
- i can't get my dehumidifier to connect to the smart things app, it just times out every time.
- why is my ge smart dehumidifier so loud all of a sudden, like a grinding or rattling noise?
- the bucket is empty but my ge aper50lz keeps showing a full bucket light and shuts off, how do i fix it?
- my ge smart dehumidifier is just flashing 'PF' on the display and won't run at all, what's that mean?
- the touchscreen on my bes876 is becoming unresponsive or registering phantom touches, can i fix this or is it toast?
- my machine is leaking water from the bottom, underneath the group head area, what's the cause?
- the pressure gauge needle barely moves when i pull a shot, it stays in the pre-infusion zone, am i doing something wrong?
- the automatic dosing on my impress is totally inconsistent, sometimes it gives way too much and sometimes almost nothing, how do i fix it?
- my machine keeps saying 'add water' but the tank is definitely full, what gives?
- the steam wand on my impress just dribbles or spits water, it won't make proper dry steam, what's wrong?
- the grinder on my bes876 is making a horrible screeching or grinding metal noise, what's broken?
- my barista express impress just shows the cleaning icon blinking and won't let me do anything else, how do i get out of this mode?
- it's making ice but the pieces are really small and thin, like slivers, not the usual nuggets.
- opal 2.0 is plugged in but completely dead, no lights, no sound, nothing.
- ice from my opal tastes weird and plasticky, did i not clean it right?
- my opal's bluetooth won't connect to the smartHQ app anymore, any tricks?
- how do i reset the clean light on my opal 2.0? it won't go away after i cleaned it.
- opal 2.0 side tank keeps saying it's empty when it's clearly full, what gives?
- why is my opal making a loud grinding noise when it's trying to make ice?
- my opal 2.0 just turned off and the lights are flashing red and blue, what does that mean?
- alexa on my echo hub keeps saying "i'm having trouble connecting right now" but the wifi signal shows full bars.
- how do i clean the echo hub screen without damaging it? it's a fingerprint magnet and my cleaning spray just smears it.
- the echo hub gets really hot to the touch on the back, especially near the top. is this normal or is it gonna melt?
- my echo hub won't stream video from my ring doorbell or blink cameras, it just shows a loading spinner then an error.
- is there a way to turn the echo hub screen completely off at night? the dimmest setting is still too bright in my bedroom.
- why does my echo hub keep disconnecting from wifi every day or two? i have to reboot it to get it back online.
- the screen on my echo hub is totally unresponsive to touches, i have to use the app to control anything.
- my new echo hub just shows the amazon logo and spins forever, it's been like this for an hour after plugging it in.
- my frigidaire portable ac is constantly cycling on and off every few minutes, it never just runs steady. what's up with that?
- the remote for my frigidaire portable ac stopped working. i changed the batteries, pointed it right at the sensor, nothing.
- how do i clean the filter on this thing? the manual is gone and it feels like i'm going to break the front trying to pull it off.
- my frigidaire portable ac won't turn on at all, no lights, no response from the panel or remote. it's plugged in.
- the fan on my frigidaire portable ac is crazy loud, like a grinding or rattling noise. it's not the normal fan sound.
- my frigidaire portable ac is running but barely blowing any cold air, it's just kind of cool. checked the window kit, seems fine.
- the hose connection on my frigidaire portable ac is leaking water inside the room, not outside. it's making a puddle.
- my frigidaire portable ac shows e3 and just shuts off after a few minutes, what does that even mean?
- my craftsman cordless drill is making a grinding noise when i try to change the speed setting. is it broken?
- is it safe to store my dewalt batteries in a toolbox with my drill bits and screws?
- is it okay to use my avid power cordless drill driver to mix drywall mud or paint?
- can i use my dekopro drill to mix paint or mortar?
- the chuck on my dekopro 20v drill keeps spinning loose when i'm drilling, almost threw the bit. what gives?
- can i use my avid power drill to mix drywall mud or paint?
- my avid power drill keeps stopping in the middle of driving a screw, feels like it's slipping
- frigidaire ice maker both ADD WATER and ICE FULL lights are on at the same time. what gives?
- frigidaire compact ice maker making a weird clicking/gurgling noise, is it broken?
- my milwaukee drill battery gets really hot and the tool shuts off fast, is the battery bad?
- my milwaukee m18 drill is making a weird ratcheting noise when i'm not even using it, is it broken?
- my gowise air fryer just beeped and the display says OFF but the fan is still running, is that okay?
- my gowise air fryer is making a lot of white smoke, is it broken?
- breville bambino plus making a loud pumping noise and no water comes out. is it broken?
- just moved into a place with a ge profile dishwasher that hasn't been used in months. any special steps before i run it?
- ge profile dishwasher making a lot of suds and overflowing, help!
- it keeps saying it's full when the basket has like 10 cubes in it. i have to babysit it.
- water is leaking from the bottom of the machine, underneath it, not from the reservoir.
- the power light just blinks and it won't respond to any buttons. unplugging doesn't fix it.
- the ice cubes are coming out really thin and hollow, sometimes just shells. it's not making full cubes anymore.
- how do you actually clean this thing? the manual says to use their cleaner but i don't have any.
- it's making a loud grinding or rattling noise, like something's loose inside, but it's still making ice.
- why does my ice maker keep beeping three times in a row every few minutes? it's driving me nuts.
- my silonn slim01 just got here and it won't start making ice, the power light is on but nothing happens.
- the ice crush program just makes a loud noise and doesn't actually crush the ice, it just spins it.
- the automatic soup program stops after like 30 seconds and doesn't heat up properly.
- it leaks from the bottom of the jar every time i make a smoothie, right onto the base.
- the touchscreen controls are going crazy, selecting programs by themselves or not responding.
- how do i clean the gunk out from under the rubber seal on the blade? it's disgusting.
- my super q won't turn on at all, no lights, nothing. checked the outlet and it's fine.
- the blender makes a horrible grinding or whining noise on high speeds, it didn't used to do this.
- my breville super q blender just shows 'err' on the screen and won't run, what does that mean?
- the light on my saw stays on dimly even after i take the battery out, is it haunted
- how do i get the weird black gunk and sawdust out from inside the handle and vents, it's packed in there
- the variable speed trigger on my saw isn't working right, it's either full blast or nothing, no in-between control
- the battery seems to die super fast on this saw compared to my other makita tools, like it's draining in minutes
- my saw makes a horrible grinding noise and vibrates like crazy, but only on the highest speed setting
- the shoe on my saw is stuck and won't slide forward or back, i've tried loosening the knob
- just got this saw and the blade keeps falling out while i'm cutting, i've pushed it in until it clicks but it's still loose
- my makita reciprocating saw suddenly has no power, the light comes on but the blade doesn't move when i pull the trigger
- my impact driver seems weak, it struggles on 3 inch deck screws that it used to zip right in.
- the forward/reverse switch on my dcf887 is super stiff and hard to slide with one thumb.
- how do i clean out the inside of my impact driver, it's full of sawdust from a deck job and sounds gritty.
- my dewalt impact driver just blinks its battery light red and green when i pull the trigger, doesn't spin.
- the chuck on my 887 impact wobbles side to side a little, makes the bits not sit straight.
- my dewalt impact driver won't change speeds, it's stuck on mode 1 no matter how many times i click the collar.
- the light on my dcf887 stays on all the time even after i take the battery out, it's just a dim glow.
- my dewalt dcf887b impact driver sometimes makes a loud grinding noise and then just stops driving screws, battery is charged.
- the screen has dark smudges or shadows in the corners that don't go away, especially noticeable on a gray or white background
- my pc only sees the monitor as 64hz max, not 144hz or even 120hz, in the windows display settings
- the joystick control on the back feels super stiff and i can't tell if i'm pressing it in or just moving it
- there's a constant faint buzzing or humming sound coming from the back of my aoc monitor, is it defective?
- the monitor randomly goes black for a second or two and then comes back, happens during gaming and just on desktop
- just got my cq27g2 and the colors look super washed out and flat, not vibrant like the reviews said
- my aoc cq27g2 monitor has a weird flickering or screen tearing even with freesync turned on, especially in darker games
- the colors look washed out and weird over usb-c compared to hdmi on my dell s2722qc
- is there a way to turn off the annoying white power led on the front? it's too bright in a dark room
- dell s2722qc screen goes black for a second randomly while i'm working, then comes back
- the usb-a ports on the side don't work for my keyboard or webcam, they have no power
- how do i get 4k 60hz on this thing? it's stuck at 30hz over hdmi with my windows pc
- the monitor makes a faint high-pitched buzzing or coil whine noise, especially on bright screens, is it defective?
- dell s2722qc usb-c not charging my macbook, video works fine but battery just drains
- my new dell s2722qc just shows 'no hdmi signal' even though the cable is plugged in to my laptop, what gives?
- the schedule on my t9 just randomly changes or doesn't run, even though i set it up in the app.
- my t9 is making a quiet but annoying clicking sound every few minutes, it's not the system turning on.
- how do i get the t9 to follow my remote sensor instead of the thermostat's own temperature?
- the t9 touchscreen is super laggy or unresponsive, sometimes i have to tap things five times.
- my t9 keeps disconnecting from wifi every few days, i have to reboot it to get it back online.
- i keep getting a "remote sensor not found" error on my honeywell t9, the little sensor just disappears.
- t9 says "equipment running" but my furnace or ac isn't actually on, it's just blowing room temp air.
- my honeywell t9 screen is completely blank and it's not controlling the heat at all, what do i do?
- how do i open the ports for gaming on this mr7500? the linksys app just has this 'gaming' toggle that does nothing.
- i hear a faint high-pitched whining or buzzing noise coming from my linksys router, is it dying?
- devices keep dropping off the wifi and then reconnecting a minute later, especially my smart home stuff on 2.4ghz.
- the router's power light is just solid amber and i have no internet.
- my internet speed is way slower on wifi than what i get plugged directly into the modem with the same computer.
- the 6ghz wifi network from my hydra pro just disappeared from all my devices, only 2.4 and 5 show up now.
- just got the mr7500, i can't get the stupid app to find it during setup. it just spins forever.
- my hydra pro 6e router keeps randomly rebooting, like the lights all go off and then it starts back up.
- why is my brother printer printing everything with a weird green or purple tint all of a sudden?
- i replaced the ink tanks but my brother printer still says 'ink empty' and won't print
- the scanner on my brother mfc j4335dw is making a loud grinding noise and won't scan
- j4335dw won't connect to wifi anymore after a router change, can't even find it in the wireless setup
- my brother inkvestment printer is printing really blurry or streaky, even after running the head cleaning
- printer says 'paper jam' but i've checked everywhere and there's no paper stuck, brother mfc-j4335dw
- my brother j4335dw just flashes 'wait' on the screen and won't do anything else, what gives?
- replaced a cartridge but the printer still says it's empty or not recognized on my wf-4830.
- it prints soooo slow on the first page, takes like a minute to even start, what's the deal?
- scanner on my wf-4830 won't work, says 'scanner error' on the screen or just doesn't respond.
- all my prints from the epson workforce have faint vertical lines or gaps in the text, i just put in new ink.
- setup keeps failing, my wf-4830 won't connect to wifi no matter what i try.
- my workhorse 4830 is making a loud grinding or clicking noise when it tries to print, sounds awful.
- printer says 'out of paper' but the tray is completely full, my epson wf-4830 won't feed.
- my wf-4830 printer is just flashing the power light red and won't print anything, what does that mean?
- my oven door is really hard to close, i have to slam it or it won't latch
- the air fry basket handle is stuck/won't slide into the rack, it just jams
- the clock on my toa-60 resets to 12:00 every time i unplug it, even for a second
- the bake and broil elements in my oven won't turn on at all, but the lights and fan work
- how do you clean the inside of the door glass on the toa-60? it's sealed and there's grease in between the panels
- my air fryer oven won't get hot enough, food takes forever and doesn't crisp, even though the display says it's at temp
- the fan in my toa-60 is making a horrible grinding or rattling noise, especially on air fry mode
- my cuisinart air fryer toaster oven just beeps and flashes 'Err' and won't do anything, what does that mean?
- can you use the flexdrawer with just one drawer in? mine doesn’t seem to heat if one is out.
- the ‘start’ button on my ninja is unresponsive, have to mash it a bunch of times to get it going.
- why does my food come out soggy in the bottom drawer but burnt on top in the flexdrawer?
- the display on my flexdrawer is flickering or has segments missing, is the screen dying?
- my air fryer won’t turn on at all, no lights, nothing. i’ve checked the outlet.
- how do you get the drawer slides clean? mine are all gunked up and the drawers stick.
- the fan in my ninja flexdrawer is making a horrible grinding noise, like metal on metal, is it broken?
- my foodi flexdrawer just shows E-01 and won’t do anything when i try to start it, what’s that?
- i can't get the portafilter to lock in past about 4 o'clock, it feels tight and grinds everywhere
- my machine makes a loud screeching or grinding noise from the pump, is it broken?
- how do i get the drip tray out on this thing? it seems stuck and i can't clean it
- the power light comes on but nothing happens when i press the brew or steam button
- the coffee from my delonghi tastes burnt and bitter, no matter what beans i use
- why does my stilosa leak water from the bottom onto the counter when i'm brewing?
- the steam wand on my ec260bk is pathetic, it just spits hot water and makes weak foam
- my new delonghi stilosa won't pull a shot, the pump just clicks and water barely drips out
- it's stuck on sensing and just agitates slowly forever, never moves to fill or wash.
- how do i clean the filter on this thing? i'm getting a musty smell and the manual is useless.
- the control panel is completely dead, no lights, no response, like it's not getting power at all.
- my clothes are coming out of the wash still soapy and the rinse cycle doesn't seem to use enough water.
- the lid lock light just flashes and it won't start, even though the lid is definitely closed.
- washer makes a loud grinding or rumbling noise only during the spin cycle, sounds like it's gonna walk across the floor.
- suddenly getting an F21 error on my whirlpool washer and it won't do anything.
- my whirlpool top loader just keeps filling with water and then draining it out over and over, it never starts the wash cycle.
- i accidentally vacuumed up some water with my miele c3, it sputtered and shut off. what do i do now?
- the dust bag compartment lid on my marin is really hard to open, i feel like i'm going to break it
- the cord rewinder on my canister is super stiff and doesn't retract the cord all the way anymore
- how do i clean the main hose on the c3 marin? it seems clogged and i can't get anything to go through
- my miele c3 makes a high-pitched whistling or howling noise, not the normal motor sound, from the canister
- i just got a c3 marin and the suction feels really weak, even on the highest setting, is it broken?
- the powerhead on my marin won't spin the brushroll, the green light is on but the roller is just dead
- my miele c3 marin just keeps shutting off after a few seconds, the powerhead light flashes and it dies
- my robot just randomly starts a cleaning job in the middle of the night, it's creepy
- the brush roll keeps stopping during a clean, app says 'clean brush roll' but i just did
- it's missing whole sections of the room when it cleans, just skips big areas
- shark iq base station flashing red light and won't charge the robot
- robot keeps getting stuck on rug fringe or under cabinet lips, says 'stuck' in the app
- how do i reset my shark iq robot? it's frozen on an error and the buttons aren't responding
- shark iq robot won't empty its bin into the base, it just docks and beeps and the base makes a weird noise
- my shark iq robot says 'clean cliff sensors' and just stops in the middle of the floor, there's no cliff there
- can i use my george foreman grill on an extension cord? it keeps tripping my kitchen outlet.
- the floating hinge on my grill is super stiff, i feel like i'm going to break it when i open the lid.
- the power light on my george foreman grill is really dim or flickering, but it still heats up. should i be worried?
- how do you actually clean the hinge area on the george foreman? grease just gets baked in there.
- my grill makes a loud buzzing or humming noise when it's preheating, is it going to catch fire?
- the drip tray on my george foreman grill keeps overflowing even when i'm not cooking something super greasy.
- the nonstick coating on my grill plates is flaking off into my food. is this safe and can i fix it?
- my george foreman grill lights up but it won't get hot at all, just stays cool. what gives?
- after the latest firmware update, my grill's fan sounds different and way louder. did it break itself?
- the startup cycle takes forever and sometimes fails with an 'igniter' message. do i need a new igniter?
- grease is pouring out from under the grill and down the legs, not into the cup. what did i do wrong?
- my smokefire just shut down in the middle of cooking and now it won't turn back on, no lights, nothing.
- the temperature on my ex4 is swinging wildly, like +/- 50 degrees from where i set it. is it broken?
- i can't get my grill to connect to the app, it just spins forever. my phone's bluetooth and wifi are on.
- why does my smokefire make a loud, repetitive clicking noise from the hopper when i'm not even using it?
- my smokefire ex4 just shows 'err' on the screen and won't start up, what's going on?
- the fan runs but no cold air comes out at all, not even slightly cool. it's just a fan now.
- my portable AC keeps tripping the circuit breaker after running for like 20 minutes. it's on its own outlet.
- how do i clean the filter on this thing? i can't figure out how to get the front panel off without breaking it.
- the remote for my slpac10 just stopped working. i changed the batteries but it still doesn't do anything.
- water is leaking out from the bottom of my sereneLife, not from the tank. it's making a puddle.
- i set it up but the room isn't getting any cooler, it's just blowing slightly cool air. what am i doing wrong?
- why does my portable AC sound like a lawnmower when i turn it on? the fan is crazy loud and vibrates.
- my sereneLife slpac10 just shows 'e2' on the display and won't turn on, what does that mean?
- my echo show 5 keeps turning its screen on by itself in the middle of the night, it's really bright.
- the sound from my echo show 5 is really tinny and distorted, especially at higher volumes.
- i factory reset my echo show 5 but now it's stuck on the orange spinning circle during setup.
- the touchscreen on my echo show 5 is going crazy, selecting things by itself and not responding to my touches right.
- my echo show 5 camera privacy shutter won't slide closed all the way, it's stuck halfway.
- how do i get this sticky gunk off my echo show 5 screen without ruining it?
- why does my echo show 5 keep saying 'sorry, i'm having trouble understanding right now' over and over?
- my echo show 5 screen just went black and won't respond to anything, but the light ring is still on.
- fan runs but compressor keeps clicking on and off every few minutes, not dehumidifying right
- display says 'cl' and it won't run, i just cleaned the filter yesterday
- the continuous drain hose setup is leaking where it connects to the back of the unit
- how do you clean the filter on this thing? i can't find a latch or anything to get it out.
- it's running but not collecting any water, bucket stays empty and humidity isn't dropping
- unit won't turn on at all, no lights, nothing. checked the outlet and it's fine.
- tosot 50 pint pump model is making a loud grinding noise when the pump kicks on, sounds awful
- my tosot dehumidifier just keeps beeping e2 and won't start pulling water, what is that?
- water is leaking from the bottom of the dehumidifier, not from the bucket or the drain hose connection.
- the fan runs but the compressor never kicks on, so it's just blowing room air around.
- frost keeps building up on the coils inside even though the room isn't that cold, maybe 68 degrees.
- i get an 'f0' error code on the display and then it shuts off, what's that about?
- the bucket is full light comes on immediately when i put the empty bucket back in, like it's not sensing it right.
- why is my ge adhr50lz so loud all of a sudden? it sounds like a rattle or buzzing from the bottom.
- my 50-pint ge dehumidifier is running constantly but not pulling any water out of the air, bucket stays dry.
- my ge adhr50lz dehumidifier just shows ‘cl’ on the display and won’t start, what does that mean?
- the door opens super slow from the app compared to the wall button, like there's a several second delay.
- the hub status light is flashing green and red alternately, what does that even mean?
- myQ worked fine for months then suddenly it won't connect to alexa or google home anymore.
- i keep getting 'network error' in the app when trying to add a new user for guest access.
- the 'close door' command from the app just doesn't work half the time, it says it sent it but nothing happens.
- i get a loud, rapid beeping from the myQ hub itself sometimes for no reason, not from the opener.
- my garage door opens and closes fine with the wall button but the myQ app always says 'door status unavailable' or just spins.
- my myQ hub just has a solid yellow light, the app says it's offline, and it won't connect no matter what i do.
- learn button on my chamberlain opener doesn't light up or do anything when i press it. can't add new remotes.
- there's a loud banging or popping sound from the opener when it starts and stops, but the door moves okay.
- remote and wall button work fine but the myq app says 'opener offline' constantly. wifi signal is strong.
- door starts to close then immediately reverses and goes back up. no error lights, nothing blocking it.
- my garage door opener light just stays on all the time and won't turn off, even hours after closing.
- trying to connect my b4545t to wifi and the myq app but it just won't find it during setup. the light is solid purple.
- opener motor runs but the door won't go up or down, just makes a grinding noise. chain seems loose.
- my chamberlain b4545t opener just beeps constantly when i try to close the door, light flashes 10 times, what is that?
- my camera says it's online in the app but it hasn't recorded any motion events in hours, even when i walk right by it
- how do i clean the lens on my spotlight cam pro without smearing it or messing up the waterproofing
- the two-way talk on my camera sounds super choppy and robotic, people can't understand me
- my ring cam pro wired makes a high-pitched buzzing sound all the time, it's really annoying
- i keep getting 'person detected' alerts but it's just a car driving by on the street, how do i make it stop
- the built-in spotlight on my cam pro won't turn on automatically at night, even though motion alerts work
- why does my spotlight cam pro's motion alerts lag so bad, sometimes i get them 5 minutes after someone's at the door
- my ring spotlight cam pro just has a solid white light and won't connect to the app
- my doorbell 4 chime (the indoor one) isn't ringing when someone presses the button, but my phone gets a notification
- the button on my doorbell 4 feels mushy and sometimes doesn't click when i press it
- the motion alerts on my doorbell 4 are going off all the time for cars and shadows, how do i make it only see people
- i get a spinning blue circle on my doorbell 4 and then it just restarts itself over and over
- my doorbell 4 battery dies crazy fast like in a week even though it's hardwired
- the infrared night vision on my doorbell 4 makes everything look all white and washed out, faces are just blobs
- just installed my doorbell 4 and the live view is super laggy and choppy, takes forever to load
- my ring doorbell 4 keeps going offline and won't reconnect to wifi no matter what i do
- my arc sounds kinda muffled and flat, not the big spacious sound i expected. did i set it up wrong?
- the green status light on my arc is constantly on and it won't respond to the app or touch controls.
- my arc soundbar makes a loud pop or crackle sound sometimes, especially when starting or stopping audio.
- how do i clean the fabric grille on my arc without ruining it? it's getting dusty.
- no sound is coming from my arc soundbar even though the app says it's playing, tv input is fine.
- sonos arc keeps randomly disconnecting from wifi and dropping out of the system, have to reboot it constantly.
- my arc's voice audio sounds super clear but all the movie sound effects and music are super quiet, is it broken?
- my sonos arc just has a flashing white light on the front and won't connect to anything, what's going on?
- i get a popping or crackling noise from my beam when there's no audio playing, like between songs or during quiet scenes
- the sound from my beam gen 2 seems really quiet even at high volume, especially the dialogue
- my beam is connected but the voice assistant (alexa or google) just stopped hearing me, the mic light doesn't come on
- trueplay tuning keeps failing on my iphone, it just says 'tuning interrupted'
- how do i clean the fabric on the front of my beam without wrecking it? it's getting dusty
- my beam gen 2 just stopped playing any sound from my tv, but the app works and music plays fine
- the audio cuts out for a second every few minutes when i'm watching tv through the beam
- my beam gen 2 just flashes a white light and won't connect to the app no matter what i do
- the local dimming on my tv makes bright scenes look weird and blotchy, especially in game mode. can i adjust it?
- i'm getting no sound from my soundbar connected via hdmi arc on my 65r655. the tv speakers work fine.
- the voice search with the remote isn't working, i press the button and nothing happens.
- my tv keeps disconnecting from wifi every day, i have to keep going into settings to reconnect it.
- the screen on my tcl 6-series looks dirty or smeared in the corners, but i can't wipe it off. what is that?
- why does my tv make a faint clicking or popping sound sometimes, usually when it's turning on or off?
- the google tv interface on my 65r655 is super laggy and apps keep crashing, how do i speed it up?
- my tcl 6-series won't turn on, the little red standby light just blinks three times. what's that mean?
- my tv says 'no signal' on the right hdmi port but my playstation works fine on the other one
- the audio keeps cutting out for a second every few minutes over hdmi arc to my soundbar, video is fine
- how do i get rid of the 'live tv' button on the home screen or change the default input, it keeps going to antenna
- the screen on my tcl has these weird dark patches or clouds in the corners when it's a dark scene, is this normal
- my tv randomly turns itself on in the middle of the night, it's creepy and waking me up
- the remote for my 55s546 is super laggy or just doesn't work unless i'm pointing it right at the tv
- tcl google tv keeps saying 'low on storage' and apps are crashing, how do i clear space on this thing
- my tcl s546 tv just shows a black screen but the red standby light is on, sound works but no picture at all
- why does the exhaust fan on the bottom run for like 5 minutes after i'm done cooking?
- the door on my compact microwave feels loose and doesn't always latch shut firmly
- it keeps showing an H97 error code on the display, what does that mean?
- how do you clean the inside of this thing? the top looks like it has a brown stained coating that won't come off
- there's a really loud humming or buzzing noise coming from my microwave, way louder than the fan
- the number pad on my nn-sn68ks is totally unresponsive, only the start/+30 sec button works
- my panasonic microwave starts for a few seconds then just stops and beeps, the turntable isn't moving
- just got this panasonic microwave and the clock is flashing 12:00, it won't let me start anything
- how do i get the damn burnt popcorn smell out of this samsung microwave? the usual tricks aren't working.
- the touchpad on my samsung microwave is super unresponsive, have to press buttons multiple times, especially the number pad.
- my microwave just stopped working mid-cycle, no display, no power, nothing. checked the outlet and breaker and they're fine.
- the led lights under my samsung microwave are really dim or flickering, can i replace them myself?
- the sensor cook function on my me21m706bas always seems to undercook everything, it's basically useless.
- i get an 'e-1' error code when i try to start cooking, what does that mean on this samsung microwave?
- the vent fan on my samsung over-the-range microwave is so loud it sounds like a jet engine, even on the low setting.
- my samsung me21m706bas microwave just shows a blinking '88:88' on the display and won't respond to anything, what's the deal?
- the heated dry option doesn't seem to do anything, plastic items are always soaked and everything is still wet at the end.
- my dishwasher is leaking from the bottom left corner, right onto the floor. it's not a lot every time.
- the sani rinse light never comes on or stays on, how do i know if it's actually working?
- water is sitting in the bottom of the tub after a cycle ends, it's not draining all the way.
- the control panel is totally dead, no lights, no response, but i can hear a faint hum from inside when the door is closed.
- it's making a loud grinding or humming noise during the wash cycle, sounds like it's coming from the bottom.
- dishes are coming out with white chalky film or spots, especially on glasses, even with rinse aid full.
- my maytag dishwasher just beeps three times when i try to start it and the lights flash, what's that code?
- why is there always a little pool of dirty water at the bottom of my dishwasher after it finishes?
- it keeps flashing 'clean filter' but i just cleaned it yesterday, is it broken?
- the dishes on the top rack come out completely dry but the bottom rack is still soaking wet, what gives?
- how do i get my dishwasher to connect to wifi? the app just says 'device not found'.
- my dishwasher is making a loud grinding noise only during the drain cycle, sounds awful.
- the control panel on my dishwasher is completely dead, no lights, no response, but i hear a faint hum. help?
- why does my whirlpool wdt750sakz leave a white, powdery film on everything after the dry cycle?
- my whirlpool dishwasher just beeps three times and won't start, what's that about?
- the uv light on my mooka air purifier keeps turning off by itself, is it broken?
- absolute ozone atlas unit making a weird buzzing or humming noise, is that normal?
- air aroma aromax making a weird sputtering noise, is it broken?
- my puroair 240 is making a weird humming/vibrating noise, it didn't do this before. is it broken?
- why did my winix air purifier suddenly get really loud?
- why is my winix 5510 making a chirping or buzzing noise? is it broken already?
- coway air purifier timer won't turn off, it just keeps running after the time is up.
- why does my coway air purifier keep showing red (high pollution) even in a clean room?
- voopnu air purifier making a weird humming/vibration noise, is it broken?
- levoit air purifier making a weird rattling noise on fan speed 3, is something loose inside?
- can i hook up my fridge to my aquasana claryum 3-stage filter?
- can i mount my sceptre e24 monitor vertically in portrait mode for coding?
- just got a brother 1360 all-in-one, can i use it with my windows 11 laptop on arm? do i need special software?
- is it normal for my aquatru to use a lot of electricity? i see my bill went up.
- my aquatru water dispenser won't turn on, no lights, nothing. checked the outlet. what now?
- express water ro5dx making a weird gurgling or spurting noise from the faucet, not a steady stream.
- my express water ro5dx is making water taste kinda flat and boring, is this normal?
- my cuzn water filter is making a gurgling noise, is something wrong?
- can i use my cuzn uc-200 with my private well water?
- my ispring t32m drain line keeps running non-stop, even overnight. is it supposed to do that?
- bluevua ropot making a loud buzzing noise from the pump, is it broken?
- just installed my ispring rcc7ak-bn and the water coming out is cloudy with bubbles, did i do something wrong?
- the lid on my brita water pitcher won't close all the way or feels loose, how do i fix it?
- what's the right way to clean under my ego power+ mower? i don't want to mess up the motor.
- nutri bullet pro 900 making a horrible grinding noise, sounds like metal on metal, did i break it?
- the handles on my crock pot cook and carry get crazy hot during use, is that normal?
- is it safe to use my powerxl air fryer pro on a granite countertop?
- powerxl air fryer pro is smoking white smoke, is it broken?
- my roomba i3+ light ring is flashing blue in one spot and it's going in circles, is it broken?
- my roomba i3+ is making a horrible grinding noise from the bottom, what do i check?
- after cooking, the lid is totally stuck shut even though the pressure is gone and the float valve is down
- the pressure regulator weight just rattles and sputters steam violently, never settles into a gentle rock
- i can't get the burnt smell out of the silicone sealing ring, everything i cook now tastes like the chili i made last week
- the handles on the pot and lid get way too hot to touch during cooking, is that normal?
- my aluminum pressure cooker pot has these weird cloudy white spots all over the inside after i made beans
- the float valve on my doitool cooker won't pop up at all, even after it's been on high heat for 20 minutes
- i hear a loud, constant hissing from the valve the whole time my pressure cooker is on, even after it's supposed to be up to pressure
- my doitool pressure cooker lid won't lock into place no matter how i twist it, feels jammed
- the handles on the pot get crazy hot on the stove, can't touch them without a towel.
- how do i quick release without getting steam and food spray everywhere? it's a mess.
- the float valve won't pop up even though steam is coming out and it seems pressurized.
- i hear a loud, scary rattling or chattering noise coming from the pressure valve when it's cooking.
- the aluminum bottom of my cooker has these cloudy white spots and looks etched after washing.
- my pressure cooker is taking way longer than recipes say to come to pressure, like 20+ minutes.
- the safety lock on my pressure cooker lid won't engage, i can't turn it to lock.
- my universal ultra pressure cooker won't build pressure at all, just hisses steam from the valve forever.
- my presto canner makes a loud, scary rattling or chattering noise when the pressure regulator weight is rocking, is that okay?
- i see a bunch of tiny pinholes or dark spots on the inside bottom of my aluminum pressure canner, is it still safe to use or is it corroded?
- the little metal pin in the center of the lid, the air vent cover lock, it won't pop up after my canner cools down, lid is stuck locked, help?
- my canner's overpressure plug is kinda melted and deformed, do i need to worry about it or can i just keep using it?
- water keeps leaking out from under the lid of my pressure canner once it gets hot, before i even put the weight on, is that normal?
- the pressure gauge on my presto canner is reading way higher than the regulator weight should allow, like 20 psi when i'm using the 15 lb weight, is it broken?
- the black rubber gasket on my pressure canner lid is sticky and gross, can i just clean it with bleach or something?
- my presto pressure canner won't come up to pressure, the regulator just kinda rocks but the gauge stays at zero, what's up?
- my dream cooker makes a high-pitched humming or buzzing noise when it's just plugged in, not even cooking. is it broken?
- the keep warm function isn't keeping my food warm, it's just lukewarm after an hour. what gives?
- i can't get my dream cooker to connect to the app. bluetooth just spins and never finds it.
- the auto steam release on my dream cooker is super loud and spits steam and water everywhere, is that normal?
- how do you clean the touchscreen on this thing? it's got greasy fingerprints that won't come off and now it's not responding well.
- why does my dream cooker keep giving me a 'burn' error when i'm trying to sauté or pressure cook?
- the lid won't lock on my dream cooker, it just spins and beeps at me. what's the trick?
- my dream cooker just shows the logo on the touchscreen and never goes to the main menu, it's frozen on startup.
- the blades spin slow and weak, it won’t puree my spinach anymore like it used to.
- it gets really hot at the bottom after one blend, is that normal or is mine broken?
- the green ready light never comes on, just the red charging light, but it seems to have power.
- the lid leaks from the center where the blade thing screws on, it’s ruining my bag.
- my blender stops after like 2 seconds every time i press the button, it’s fully charged.
- how do you clean the blade part on this thing? i can’t get the gunk out from under the blades.
- the light on my portable blender stays red and it won’t blend, i left it charging overnight.
- my hamilton beach portable blender just makes a clicking noise and the blades don’t spin, even when it’s fully charged.
- the blend button gets stuck down sometimes and it just keeps running
- it's making a loud grinding noise, not the usual blending sound
- the lid for the travel cup leaks when i shake my drink, especially the sipper part
- my ganiza blender base unit won't turn on at all, no lights, nothing
- the plastic cup cracked where the blade screws on, can i just buy a new cup?
- how do i get the smell out of the silicone seal under the blades? it stinks
- the blades on my smoothie blender spin but it's not actually blending anything, just whirs
- my ganiza blender starts for a second then stops and the lights flash, what's wrong?
- the basket is ridiculously hard to push in and pull out of my gourmia, feels like it's scraping or catching
- the preset buttons (like fries or chicken) don't seem to cook at the right time or temp, everything comes out underdone
- how do you actually clean the inside heating element area? grease seems splattered up in there and it smokes
- food is coming out soggy on the bottom in my gourmia, not crispy, even when i shake it halfway through
- just got this and the display is completely blank, no lights, no response when i press buttons, but it's plugged in
- my air fryer makes a loud rattling or grinding noise when it runs, like something's loose inside
- the nonstick basket on my 7qt gourmia is flaking and peeling after a few months, is this normal?
- my gourmia air fryer just beeps three times and the display flashes 'E01' but it won't start cooking at all
- how do i clean the inside of the glass door? grease got behind the glass and i can't reach it
- my food is coming out soggy on the bottom in the air fryer, even when i shake it halfway through
- the display on my vortex plus is super dim, i can barely read it even in a dark kitchen
- can i use the vortex plus air fryer without the basket? like just put a pan on the rack?
- i put my vortex plus on dehydrate mode overnight and it just turned itself off after a few hours
- the non-stick coating on my vortex plus basket is peeling and flaking off after a few months, is this safe?
- why does my air fryer make a loud clicking noise every few minutes while it's running? sounds like a relay or something
- my instant pot vortex plus air fryer just beeps a few times and won't start cooking, the display is blank except for a time sometimes
- i can't get the 24-hour clock to set, the hour buttons just make it blink.
- the 'strong brew' button doesn't seem to make any difference, coffee tastes the same.
- it makes a loud gurgling or grinding noise during the brew, sounds like it's struggling.
- the 'clean' light is flashing on my taylor swoden and i can't get it to turn off.
- my coffee tastes burnt or really weak no matter how much coffee i use, is the machine defective?
- water is leaking from the bottom of my coffee maker, not from the carafe or lid.
- the warming plate on my 12-cup taylor swoden gets barely warm, coffee's cold in 20 minutes.
- my taylor swoden coffee maker just lights up the clock but won't start brewing when i press the button, what gives?
- the borosilicate carafe doesn't seal right on the warming plate anymore, it sits at a slight angle and coffee smell leaks out
- water is dripping from the showerhead even when the machine is off and unplugged, it just slowly leaks out
- my coffee maker won't shut off automatically after 2 hours like it's supposed to, the warm light just stays on forever
- the reusable filter that came with my mueller coffee maker lets a ton of fine sludge through into my cup
- the keep warm plate on my mueller gets way too hot and burns the last bit of coffee in the carafe
- coffee is leaking from the bottom of my mueller machine onto the counter when it brews
- why does my mueller coffee maker make a really loud gurgling sound like it's choking halfway through brewing
- my mueller coffee maker just has the power light on but won't start brewing when i hit the button
- the buttons on the front panel aren't responding half the time. i have to press them super hard to get it to work.
- water is leaking from the bottom of my ninja coffee maker, right onto the counter. where's it coming from?
- the 'clean' light is flashing and won't stop. i ran vinegar through it last month. how do i make it go off?
- my coffee tastes weak and watery no matter what setting i use. i'm using the same coffee as my old machine.
- the warming plate on mine gets way too hot and burns the coffee in like 20 minutes. can i turn it down?
- why does my ninja brewer make a loud gurgling, almost choking sound when it's brewing? sounds like it's struggling.
- i set the delay brew last night but it never started this morning, just had the clock on. what did i do wrong?
- my ninja coffee maker just keeps beeping three times and won't start brewing, what's the deal?
- the screen has a weird yellow tint or the colors look washed out compared to my laptop
- can i use this innoview monitor with my nintendo switch? i plugged it in with hdmi and it's not working
- the buttons on the side of my innoview monitor are super confusing, how do i actually adjust the brightness?
- my innoview gets really hot on the back after like 30 minutes, is that normal?
- the touchscreen on my innoview isn't working at all, it's just a regular screen now
- how do i get sound to come out of my innoview monitor? it has speakers but my laptop audio still plays from the laptop
- innoview monitor screen flickers like crazy when i move it or touch the cable, goes solid if i leave it alone
- my innoview portable screen just stays black when i plug it in with usb-c, power light is on but nothing shows up
- the usb ports on the side of my monitor don't work, my keyboard and mouse won't light up
- freesync keeps turning itself off on my s2725qs when i play games, screen goes black for a second
- the power button light on my dell monitor stays solid white even when i turn the screen off, can i make it turn off?
- i can't get 120hz to show up in windows settings with my s2725qs, it's stuck at 60hz
- how do you even clean the screen on the s2725qs? the antiglare coating seems weird and i don't want to ruin it
- my dell 4k monitor has a faint buzzing or humming sound coming from the back, is it going to die?
- just got my dell s2725qs and the colors look really washed out and weird, not like my old monitor at all
- my dell s2725qs monitor just shows 'no hdmi signal' and then goes to sleep, my pc is definitely on
- the screen goes to sleep or turns off randomly even though my laptop is still on and active. how do i stop it from sleeping?
- my monitor has these weird faint lines or a shadowy patch on the screen that doesn't go away, only visible on certain colors.
- it works with my laptop but won't show anything from my nintendo switch or steam deck, just a no signal message.
- how do i adjust the brightness? there's no buttons, just a little joystick thing and it's not doing what i think.
- the built-in speakers on my mnn monitor sound tinny and awful, is there a way to make them louder or better?
- i plug it into my laptop with usb-c but it doesn't show up as a second monitor at all, just charges. what am i missing?
- the screen on my portable monitor flickers like crazy when i move the cable. is it already broken?
- my mnn portable monitor turns on but the screen is just black, no backlight or anything, but the power light is on. what's the deal?
- duplex unit is jamming every time it tries to flip the page for two-sided printing
- prints are coming out with faint vertical lines or streaks down the page, new toner cartridge
- wireless keeps dropping, have to keep re-adding it to my network every few days
- i get 'unable to print 32' error on the display, what does that even mean
- my brother printer is making a loud grinding or clicking noise when it tries to pick up paper
- trying to scan to my computer over wifi and it just fails every time, connection seems fine
- printer says 'toner life end' and won't print, but the cartridge is definitely not empty
- my brother l2640dw just shows 'paper jam' but there's nothing stuck in there, i've checked everything
- instant ink says my cartridge levels are wrong, like it says empty but it's new. now it won't let me print.
- how do i cancel a print job stuck in the queue on this thing? it just says 'processing' forever.
- printed pages have streaks or lines of missing color, especially after not using it for a week or two.
- scanner on my deskjet 2855e won't work, hp smart app just says 'scanner not detected' or freezes.
- my hp 2855e is making a loud grinding or crunching noise when it tries to print, like gears stripping.
- printer says 'out of paper' when there's definitely paper loaded in the tray. it just won't pick it up.
- set up my 2855e but it won't connect to wifi, keeps saying connection failed. my phone and laptop are fine.
- my hp deskjet 2855e just flashes the power light and won't actually turn on, no display or anything.
- the power button does nothing, no lights, no sound. checked the outlet and it's fine.
- my ice tastes weird, kinda plastic-y or like the previous batch of ice. how do i get rid of the taste?
- it just beeps three times and flashes the add water light, but the tank is full. won't start.
- how do you actually clean this thing? the manual just says use vinegar but there's scale in the tiny holes.
- water is leaking out from the bottom of my sweetcrispy machine, underneath it. what gives?
- the full basket light is on but there's barely any ice in there. it keeps stopping.
- ice maker runs but the cubes are tiny and thin, like slivers. i have the size set to large.
- my sweetcrispy ice maker just arrived and it's making this loud grinding noise when it starts up, is it broken already?
- after cleaning, my ice tastes like plastic or chemicals, how do i get the taste out?
- machine turns on, runs for a minute, then just shuts off completely before making any ice.
- the ice size selector button doesn't seem to do anything, cubes are always the same small size.
- water is leaking out from the bottom of the unit onto my counter, not from the reservoir.
- it's making a loud grinding or rattling noise when it's trying to drop ice into the basket.
- the self cleaning light is flashing and now it won't make ice, how do i make it stop or run the cycle?
- ice maker is running but the cubes are super thin and hollow, like shells, they melt instantly.
- my igloo countertop ice maker just beeps nonstop when i turn it on, nothing else happens, what's wrong?
- after cleaning with vinegar, my ice tastes weird or like plastic. how do i get rid of the taste?
- it says it makes 26lbs a day but mine seems to slow down to a crawl after a few batches.
- water is leaking out from the bottom of the unit, not from the overflow hole.
- the auto-clean light is flashing and it won't do anything else. how do i make it stop?
- my ice cubes are coming out really thin, slushy, or melting super fast. not solid at all.
- the 'add water' light is on but the tank is definitely full. it won't start cycling.
- it's making a loud grinding or rattling noise when it's trying to make ice, sounds terrible.
- my newbulig ice maker just arrived and won't turn on at all, no lights, nothing. what am i missing?
- the ice tastes kinda plasticky or funny even after multiple cleanings. how do i get rid of that?
- water is leaking from the bottom of my nugget ice maker, not a lot but a constant small puddle.
- it says it makes 24 lbs a day but mine seems super slow, like it takes hours to fill the basket once.
- just set it up but it won't turn on at all, no lights, nothing. checked the outlet and it's fine.
- my efmic189 is making a really loud grinding or buzzing noise when it tries to make ice. sounds bad.
- how do i get the stupid 'clean' light to turn off on my frigidaire ice machine? i already ran vinegar through it.
- the ice maker is running but the ice comes out super thin and slushy, not those solid nuggets. what's wrong?
- my frigidaire nugget ice maker just started blinking a blue light and won't make ice, what's that mean?
- i just got it, plugged it in, and it's making a high-pitched whining noise, not a fan sound.
- how do you actually clean the inside of this thing? the shelves don't come out and it's a weird shape.
- my newair cooler is running constantly and never seems to reach the set temp, it's set to 34 but reads 45.
- the digital display just shows two horizontal lines or goes completely blank, but it's still cold inside.
- it's making a loud buzzing or rattling noise from the back, sounds like a fan is hitting something.
- condensation is building up like crazy inside my newair ab1200, everything's getting wet.
- the light on my newair beverage fridge works but the compressor won't kick on, it's just a warm box now.
- my newair ab-1200 cooler just beeps nonstop and won't stop, what the heck is that about?
- is there a way to clean the screen without damaging it? the anti-glare coating seems weird.
- the monitor won't turn on at all, no power light, nothing. i've checked the outlet.
- can i use a monitor arm with the vg248qg? the stand takes up too much space.
- my screen keeps going black for a second then coming back, especially when gaming.
- the colors look really washed out and terrible compared to my old monitor on the same pc.
- the monitor makes a faint high-pitched buzzing or whining noise, is that normal?
- how do i get 144hz on my vg248qg? windows only shows 60hz as an option in display settings.
- my asus vg248qg just has a black screen but the power light is on, no image at all.
- colors look washed out and weird on the usb-c connection compared to hdmi from the same laptop.
- there's a constant faint high-pitched whine or coil whine coming from the back of the monitor, even in sleep mode.
- the usb ports on the side don't work when connected to my pc with displayport, only with usb-c.
- the built-in speakers make a horrible buzzing sound, it's not the source audio. is there a way to fix them?
- how do i clean the screen on this thing? the matte coating seems weird and i'm scared to ruin it.
- screen randomly flickers or goes black for a second, especially when browsing or with certain colors.
- i'm getting a 'no signal' message even though my mac is connected via usb-c, and the monitor is charging the laptop.
- my lg 27uk850-w won't turn on at all, no standby light, nothing. checked the outlet and cable already.
- it won't finish a cycle, just stops partway through and sits there with the timer stuck. no error codes.
- the washer shakes and walks violently across the floor during the spin, it's really loud.
- all the lights on the control panel are flashing and it's completely unresponsive, won't do anything.
- my washer won't drain at all, just sits there with water in the bottom at the end of the cycle.
- how do i clean the filter on my speed queen top loader? i can't find it anywhere.
- it fills with water super slow, takes forever to start washing. water pressure everywhere else is fine.
- the washer is making a loud grinding noise only during the spin cycle, sounds like metal on metal.
- my speed queen tr7003wn washer just keeps beeping non-stop and won't start a cycle, what's wrong?
- after a cut, my saw smells really hot, like an electrical burning smell, is that normal?
- the oil adjustment screw doesn’t seem to do anything, i turn it but the oil use is the same
- i put in a fresh battery and pull the trigger but the chain just jerks a little and won’t spin, makes a humming noise
- the chain won’t oil at all, i see no fling on the bar even with the adjustment screw all the way open
- oil is leaking out of my chainsaw all over the place when it’s just sitting in the garage, not even running
- my chainsaw runs for a few seconds then just stops, battery is fully charged, what gives?
- the chain on my m18 fuel saw keeps getting loose no matter how much i tighten the bar nuts, it’s driving me nuts
- my milwaukee m18 chainsaw just beeps three times and won’t start at all, what does that mean?
- it starts and idles fine but bogs down and almost dies when i touch the throttle to cut.
- my chainsaw won't start at all, not even a sputter, and i just filled it with fresh gas.
- the chain keeps coming loose no matter how much i tighten the nuts, like within minutes of cutting.
- it's getting harder and harder to pull the starter cord on my ms 170, feels really stiff.
- saw runs okay but it's throwing way too much bar oil, coating everything in a slick mess.
- my ms 170 is leaking bar oil really bad, like a puddle under it when it sits, even with the cap tight.
- chainsaw starts but the chain won't spin even when i give it throttle, just sits there.
- my stihl ms 170 just starts and then dies immediately after a few seconds, won't stay running at all.
- i installed it but when i flip the switch to filtered, no water comes out at all. unfiltered works fine.
- the electronic indicator light never comes on at all, not red or green, is the battery dead?
- water is coming out around the switch lever on the side, not from the spout, is it broken?
- the filter head won't screw back onto my faucet after i took it off to clean, the threads won't catch.
- my filter makes a loud rattling or vibrating noise when i turn the water on, sounds like it's gonna explode.
- water pressure from my PUR faucet filter is super weak, just a dribble, is the filter already clogged?
- the filter light on my PFM400H just stays red all the time even though i just put a new filter in, how do i reset it?
- my new PUR PLUS faucet filter is leaking water from the top where it connects to the faucet, i tightened it as much as i could.
- how do you even change the oil filter on this thing, i can't get a wrench on it, the frame is in the way.
- it makes a horrible loud metallic rattling noise from the blower housing area, only at certain rpms.
- the 50amp outlet on my xp12000eh doesn't work, the 120v ones are fine, did i get a lemon?
- my generator is putting out really low voltage, like 90v, on the 120v outlets, is the alternator fried?
- the electric start on my duromax does nothing, no click, just silence, but the battery reads 12v.
- switched my dual fuel to propane and it starts but then immediately sputters and dies, what gives?
- just got my xp12000eh and it's surging really bad under load, like the lights are pulsing, is it broken?
- my duromax xp12000eh ran for a couple hours then just died, won't restart at all now, battery seems fine?
- replaced the filter with a new official one and now the unit just beeps three times and won’t start
- it says it’s connected in the app but the air quality reading is always stuck at 'good' even when i know it’s not
- the display is completely dead, no lights at all, but i can hear a faint hum from inside
- how do you actually clean this thing? the manual is vague and i don't want to break it
- my air pro’s fan randomly turns up to max speed for no reason, even on auto mode
- the wifi light just blinks blue forever and it never connects to my app, what gives?
- why does my air pro make a loud, high-pitched whining or buzzing noise on the higher fan speeds?
- my molekule air pro just shows a solid red light and won’t turn on no matter what i press
- i get a weird plastic burning smell from my new dyson tp07 when i first turn it on
- the auto mode on my tp07 is going crazy, fan speeds up for no reason when the air is clean
- how do i clean the actual fan blades inside the loop on the tp07? the manual doesn't say
- my dyson won't connect to the app anymore, it just keeps searching forever
- the screen on my tp07 is totally blank or frozen, but the fan is still running
- why does my dyson air purifier keep saying it needs a filter replacement when i just put a new one in?
- dyson tp07 making a loud rattling or grinding noise, sounds like something's broken inside
- my dyson tp07 just shows a red light on the base and won't turn on at all, what's wrong?
- i just assembled my new ryobi mower and the side discharge chute flap won't stay up, it just flops down.
- the blade on my ryobi 40v won't spin by hand even with battery out, feels totally locked up.
- there's a bad grinding noise from one rear wheel on my ryobi 40v, and it's hard to push.
- my ryobi mower battery shows full on the charger but dies in like 5 minutes when i mow.
- how do you get this mower to fold for storage? the handle seems stuck and i don't want to break it.
- the self-propel on my ryobi 40v just stopped working, handle lever feels loose and does nothing.
- ryobi 40v mower suddenly sounds like a jet engine and cuts really poorly, just scatters grass everywhere.
- my ryobi 40v mower just beeps three times when i pull the start handle and does nothing, what gives?
- my schedule keeps disappearing or resetting to default on its own. why won't it save my changes?
- i replaced the batteries but the thermostat still says 'battery low' and won't let me change settings.
- the touch screen on my honeywell is getting less responsive, sometimes i have to press an icon like 5 times.
- how do i get this thing off the wall plate? i'm afraid i'm going to break it pulling it.
- i'm getting an 'equipment running too long' alert on the screen. what does that mean?
- the app says my thermostat is offline but the screen on the wall is working fine and shows it's connected.
- why does my thermostat keep disconnecting from wifi? i have to keep re-adding it in the app.
- my honeywell smart thermostat screen is completely blank, no lights, nothing. it's just dead.
- my ultra leaves huge chunks unblended at the top, have to keep stopping and shaking it, what's the point?
- nutribullet ultra just stopped in the middle of blending and won't turn back on, no lights nothing
- the blade on my ultra blender is suddenly really hard to screw onto the cup, feels like it's cross-threaded
- my nutribullet ultra smells like burning plastic or electrical when i use it, only for a few seconds
- the touch button on my nutri ultra feels stuck or unresponsive, sometimes takes like five presses to work
- how do you clean the base of the nutri bullet ultra? stuff keeps dripping down into the silver part
- nutribullet ultra making a horrible grinding noise and vibrating like crazy, sounds like it's gonna explode
- my new nutri bullet ultra just flashes the green light and won't blend, i push the button and nothing happens
- the lid won't lock onto the base, it just spins and won't click into place.
- the stainless steel inner pot has these rainbow-colored stains after pressure cooking, are they safe?
- my food comes out soggy when using the air fryer lid, not crispy at all.
- the float valve on my duo crisp won't pop up when pressure cooking, just stays down.
- how do you clean the inside of the air fryer lid? it's covered in greasy gunk and looks impossible.
- i press the buttons on my duo crisp but nothing happens, no lights, completely dead.
- the air fryer lid fan sounds like a jet engine is taking off, is this normal?
- my instant pot duo crisp just says 'burn' and shuts off when i try to pressure cook, what gives?
- how do you clean this thing? it's packed with sawdust and i'm worried about breaking it.
- my dewalt oscillating tool won't turn on at all, battery is charged and works in other tools.
- the tool head on my dcs354b has a lot of side-to-side wiggle or play, is that normal?
- dewalt 20v multitool feels weak, bogs down immediately even with a fresh battery on simple cuts.
- blade keeps falling off my dewalt oscillating tool even when i tighten the bolt, it's driving me nuts.
- the speed dial on my dewalt multi-tool does nothing, it's stuck on one speed.
- dewalt dcs354b makes a horrible grinding or rattling noise when i turn it on, not the normal vibration.
- my dewalt oscillating tool just stopped running mid-cut, battery is fine, what gives?
- the safety guard on my dewalt saw is stuck and won't retract automatically when i start a cut.
- my saw feels underpowered and bogs down instantly in 2x4s, even with a fresh battery. it's not the blade.
- how do i change the blade on this thing? the spindle lock button doesn't seem to engage to hold the blade still.
- the led light on my saw stays on all the time even with the battery off, is it draining my batteries?
- dust blower on my dewalt circular saw doesn't work at all, just fills my cut line with sawdust.
- my saw is making a horrible grinding noise and sparks are coming out near the blade when i try to cut.
- the blade on my dcs570b won't stay square to the base, it keeps drifting no matter how tight i make the bevel lock.
- my dewalt 20v circular saw just stopped in the middle of a cut and won't start again, the battery is charged.
- the bit keeps falling out of my dewalt impact driver, the magnetic holder doesn't seem strong anymore.
- my impact driver gets really hot right behind the chuck after just a few screws, is that normal?
- the forward/reverse button on my dcf787 is super stiff and hard to slide with one thumb.
- how do you clean out the chuck on a dewalt impact? mine is jammed full of sawdust and won't hold bits tight.
- impact driver seems weak, it struggles to drive 3 inch screws into pine and the battery dies super fast.
- the led light on my dcf787 stays on all the time, even after i take the battery out. how do i make it stop?
- dewalt dcf787 impact driver is making a really loud grinding or rattling noise when i pull the trigger, sounds bad.
- my new dewalt 20v impact driver won't run at all, the battery's charged and it's just dead, what gives?
- the velop keeps disconnecting my smart home devices like plugs and lights
- can i use my old router as a switch with the velop? i need more ethernet ports
- one of my velop nodes just has a blinking white light forever, never turns blue
- my download speeds are way slower than my plan through the velop, even wired
- the velop app says 'node unreachable' but the light on it is blue
- setup keeps failing on the 'connecting to internet' step, my modem works fine
- why does my velop keep dropping the 5ghz band? my devices keep switching to the slow 2.4
- my linksys velop node just has a solid red light and i can't connect to the internet
- the wps button on my ax86u doesn't work, it just blinks and never connects my device.
- after the latest firmware update, my ax86u is way slower and my devices keep dropping.
- how do i get the gaming port on the ax86u to actually prioritize my xbox? it doesn't seem to do anything.
- my ax86u's fan is running super loud all the time, sounds like a jet engine.
- i'm getting constant disconnects on my gaming pc wired into the ax86u, but wifi is fine.
- the 2.4ghz wifi network from my ax86u just disappeared, only the 5ghz one shows up now.
- why does my ax86u's internet light stay red and i have no connection after setting it up?
- my asus ax86u router keeps randomly rebooting itself every few hours, what's going on?
- the touchscreen on my brother printer is totally unresponsive, buttons don't work.
- all my prints have a faint gray background or streaks down the page, even with a new toner.
- scanner on my mfc-l2750dw won't scan to my computer anymore, it just says 'check connection'.
- why does it say 'toner low' for like months and still prints fine? can i just ignore it?
- brother printer says 'paper jam' but i've opened everything and there's no paper stuck anywhere.
- it's making a loud grinding noise every time it prints, sounds horrible.
- printer won't connect to wifi during setup, keeps failing no matter what i try.
- my brother l2750dw says 'replace drum' on the screen but the toner cartridge is new, what gives?
- getting an 'out of memory' error on the screen when trying to print a big pdf or a photo-heavy document.
- printer goes to sleep and then won't wake up for a network print job, i have to turn it off and on again every time.
- scanner glass gets dirty constantly and leaves streaks on every scan or copy, how do i clean it properly without damaging it?
- it makes a loud grinding or crunching noise when it starts up or when printing, sounds like it's coming from the right side.
- my prints are coming out with streaks or faded lines, especially in colors, even after running the cleaning utility a bunch of times.
- the printer screen says 'cartridge problem' or 'cartridge error' for a brand new genuine hp ink cartridge i just put in.
- just got a 9015e and it won't connect to my wifi during setup, the screen just keeps searching forever.
- my hp officejet pro 9015e keeps saying 'paper jam' but there's no paper stuck anywhere, i've checked everything.
- i got the smart one but the cosori app won't find my air fryer during bluetooth setup.
- the basket is stuck and won't come out of my cosori dual blaze, i pulled the handle and it's not releasing.
- the preset buttons (fries, chicken, etc.) don't seem to cook things right, everything comes out undercooked.
- my air fryer shuts off mid-cycle with a burning smell, and the food isn't done.
- how do i clean the inside of the dual blaze? the basket is easy but the top heating element looks gross.
- the touch screen on my cosori dual blaze is unresponsive or acting crazy, pressing buttons i didn't touch.
- my dual blaze air fryer is making a loud whirring or grinding noise, sounds like it's coming from the fan.
- my cosori dual blaze air fryer won't turn on at all, no lights, nothing. it's plugged in.
- the voice prompts on my s5 are driving me nuts, how do i turn them off?
- the clean water tank on my tineco keeps leaking from the bottom when it's sitting in the dock.
- my vacuum suddenly got really loud and sounds like it's straining, with less suction power.
- the app won't connect to my floor one s5, it just spins forever searching for the device.
- my s5 is leaving streaks and a thin film of dirty water behind on my laminate floors.
- i charged my tineco overnight but it's dead in the morning, won't turn on at all. no lights.
- the self-cleaning cycle on my tineco s5 runs but leaves the roller brush filthy and tangled with hair.
- my floor one s5 just blinks red and beeps at me non-stop, won't start cleaning. what's the deal?
- the lidar tower on top keeps spinning after it's docked or turned off, makes a whirring sound.
- i just got it and the app won't connect to the robot during setup, stuck on 'searching for device'.
- it's making a loud grinding or rattling noise from one side when it drives, but vacuums fine.
- the robot just randomly stops in the middle of a clean and goes back to the dock for no reason.
- my q7 max is vacuuming but leaving obvious lines of debris behind, especially on hard floors.
- robot says 'charging error, please check charging contacts' and won't charge on the dock.
- the q7 max keeps getting stuck on my medium-pile rug, says 'obstacle detected' and backs off.
- my roborock q7 max just blinks a red light and says 'error 1' over and over, won't move.
- i can't get the dust cup back into my shark vacuum, it won't click in place
- the hose attachment keeps popping off the back of my shark navigator when i'm using it
- my shark vacuum smells terrible like burning dust every time i use it
- the canister part of my lift-away won't stay upright, it keeps tipping over when i'm using the hose
- how do you get the wand off the shark lift-away? it's stuck and won't detach
- why is my shark navigator losing suction almost immediately after i start vacuuming?
- the brushroll on my shark lift-away isn't spinning, it just makes a humming noise
- my shark navigator just stops working and the power button light is blinking red, what does that mean?
- machine beeps three times rapidly and won't start when i press brew, the power light is just on solid.
- the 'program' button does nothing, i can't set the auto-brew time anymore.
- my coffee tastes weak and watery no matter how many scoops i use, like the water isn't getting hot enough.
- the clock on my grind and brew resets to 12:00 every time i unplug it, even for a second.
- water is leaking from the bottom of the machine onto my counter every time i run a cycle.
- coffee maker turns on, grinds beans, but then just beeps and shuts off without brewing any water.
- grinder on my dgb-900bc is making a loud screeching or rattling noise but won't actually grind the beans.
- my cuisinart grind and brew just flashes 'clean' and won't let me make coffee, i've descaled it already.
- when i try to make a carafe, it starts brewing but then just stops after a few seconds and beeps.
- i descaled my keurig but now the 'descaling' light won't turn off, how do i make it stop blinking?
- water keeps leaking from the bottom of the machine onto my counter every time i brew.
- the display on my k-duo plus is completely blank, but i can hear it power on and the buttons beep.
- why does my coffee taste weak and watery even on the strongest setting with a new k-cup?
- my machine makes a loud grinding noise from the pump when i try to brew a carafe, but nothing comes out.
- the 12oz button on my k-duo plus only fills the cup halfway, no matter what cup size i select.
- my keurig k-duo plus just shows 'prime line' and won't let me do anything, i've already run water through it.
- dyson pure cool tp04 fan stopped blowing air but the screen is still on
- dyson tp04 making a weird clicking noise, is it broken?
- my crosswave is making a horrible grinding noise, sounds like it's eating rocks
- why does my mower leave streaks of uncut grass, especially on one side? i just sharpened the blade.
- can i use a different brand's 60v battery in my toro recycler? the compatibility is confusing.
- the battery charger shows a solid red light and never turns green, even after a whole day. is my battery dead?
- how do i clean this thing? the deck is packed with wet grass and it's starting to rust.
- my mower makes a horrible grinding noise from under the deck when i engage the blade, sounds like metal on metal.
- i assembled my new toro recycler but the self-propel doesn't work, the wheels just drag. did i put it together wrong?
- the battery on my toro 60v says it's charged but the mower only runs for like 10 minutes then dies, is the battery already bad?
- my toro recycler just beeps three times when i try to start it and the blade won't spin, what's up with that?
- how do i port forward on the ax21? i can't find the virtual server menu where it usually is
- archer ax21 power light is blinking and it won't boot up, just stuck like that
- my wifi speed on the ax21 is way slower than my internet plan, even right next to the router
- i can't access tplinkwifi.net to set up my new ax21, page just won't load
- why does my archer ax21 wifi 6 router get so hot on top, is that normal?
- my archer ax21 keeps dropping wifi signal, it'll be fine for a bit then just die and come back
- the stainless steel inner pot has these cloudy white spots that won't come off, how do i clean it?
- my cooker keeps switching to 'keep warm' before it even comes to pressure, what's wrong?
- the steam release valve is stuck, i can't turn it from sealing to venting.
- the slow cook function doesn't seem to get hot enough, my food is still cold after hours.
- the display just says 'C6' and it's totally unresponsive, how do i fix that?
- i get a weird hissing and steam coming from the sides of the lid, is that normal or is it broken?
- why does my pressure cooker keep burning stuff on the bottom even when i follow recipes?
- my crock-pot express just beeps and flashes 'LID' and won't start, what gives?
- vertuoplus won't connect to the app for bluetooth, it just never finds the machine.
- the button on my vertuoplus is totally unresponsive, can't start a brew or anything.
- my coffee comes out super weak and watery no matter what pod i use, barely any crema.
- the descaling light is solid orange and won't go away even after i ran the descaling cycle.
- how do i stop my vertuoplus from leaking coffee all over the counter every time i brew?
- machine won't turn on at all, no lights, nothing. checked the outlet and it's fine.
- vertuoplus making a loud grinding noise when it spins the pod, sounds awful, is it broken?
- my vertuoplus just flashes orange three times and won't do anything, what does that mean?
- can i use my chefman dual window air fryer to cook two totally different things at once?
- my chefman air fryer with the windows is smoking a lot on the first use, is it broken?
- the keep warm function on my ninja crispi pro doesn't seem to work, food gets cold
- ninja crispi pro making a loud rattling noise when it runs, sounds like something's loose inside
- can i use my metal baking pan that came with my old toaster oven in this cuisinart air fryer oven?
- the match cook button on my ninja foodi 2-basket isn't working, it won't copy the settings
- ninja foodi dualzone keeps beeping and saying "hold" on one screen, what does that mean?
- the crisper plate keeps falling out of my chefman mini fryer basket when i dump food, dangerous?
- my chefman 2 qt air fryer is smoking white smoke, is it broken?
- hamilton beach frontfill coffee maker just stopped mid-brew and now the clock is flashing. what's wrong?
- keurig supreme descale light is on, how do i turn it off?
- APEC ROES making a gurgling sound from the drain line, is that okay?
- APEC ROES-50 drain line is constantly running water, even when the tank is full. is this normal?
- i see air bubbles in the water from my apec ro faucet, is my system broken?
- my apec reverse osmosis system is making a humming noise, is that normal?
- can i run a 24 inch bar on my husqvarna 455 rancher? it came with a 20 inch.
- my brita water filter pitcher is leaking from the bottom, help?
- the chain brake on my ego cordless chainsaw keeps engaging by itself mid-cut, super annoying. how do i stop that?
- do i really have to throw away the first three pitchers of water from a new brita filter?
- how do i get the dell display manager quick settings menu to pop up with a keyboard shortcut on my u2722d setup?
- can i make my dell u2722d automatically switch to a different picture mode when i open photoshop?
- my vitamix e310 keeps stopping after like a minute when i'm making almond butter, it's so annoying.
- the HDR on my LG 4K monitor looks terrible and dark, is it broken?
- my LG 4K monitor is making a faint buzzing/humming noise, is this normal?
- honeywell hpa300 is super loud on turbo, is that normal or is it broken?
- dell ultrasharp u2722d making a weird high-pitched buzzing noise from the back, is this normal?
- stihl ms 250 makes a high-pitched squealing noise when i first start it, goes away after a minute. normal?
- my stihl ms 250 is leaking bar oil all over my garage floor, even when it's just sitting. common problem?
- can i use my vitamix e310 to grind coffee beans or is that bad for it?
- vitamix e310 making a horrible grinding noise when i turn it on, sounds like metal on metal
- husqvarna 460 rancher makes a loud knocking or pinging noise when i'm cutting, especially under load. what is that?
- is it okay to run regular gas in my husqvarna 460 rancher? what's the right mix?
- can my honeywell hpa300 help with cat allergies? my place is full of dander.
- i spilled a little gas on my honda eu2200i when filling it. did i ruin the paint? should i just wipe it off?
- can i use dell display manager to control my old dell monitor and a new u2722d together?
- my wen 2000 watt generator is shaking a lot more than usual, is that normal?
- my greenworks electric pressure washer is making a loud buzzing sound but the pump won't run
- my APEC reverse osmosis system is making a constant dripping or dribbling sound from the drain line. is that normal?
- kitchenaid k400 making a loud grinding noise when i blend frozen fruit, is this normal?
- the filter status light on my brita isn't blinking at all, is it broken?
- i keep blowing fuses every time i try to use my sun joe electric pressure washer, what am i doing wrong?
- hpa300 air purifier smells weird when i first turn it on, like burning plastic. should i be worried?
- my sun joe pressure washer keeps blowing the fuse in my garage, what gives?
- sun joe pressure washer turns on but then shuts off by itself after a minute, is it broken?
- can i use my wen 56203i generator to power my RV's air conditioner?
- wen 2000 watt inverter generator is making a really loud knocking noise, is that normal?
- my ecobee smart sensor for doors isn't pausing my ac when the patio door is left open, what gives?
- my stihl ms 250 is smoking a lot and seems to run hot, is this normal?
- what does it mean when the green light on my honda eu2200i is blinking?
- can i turn off just the time of use feature on my ecobee premium? i don't like it precooling my house.
- my honeywell t9 keeps saying my wireless sensor won't connect. i've tried putting it in the same room, no luck.
- honeywell t9 wireless sensor won't connect, what am i doing wrong?
- my greenworks electric pressure washer is making a weird pulsating sound and the pressure goes up and down, is this normal?
- is there a keyboard shortcut to quickly open the dell display manager settings menu without clicking the icon?
- trying to use dell display manager's easy arrange to snap windows, but it's not working. windows 10's native snap keeps taking over. what gives?
- just got a new honda hrn216 and it's blowing white smoke out the exhaust. did i break it already?
- is it okay to hose off my greenworks 40v mower to clean it?
- my ego 56v mower is making a loud clicking or grinding noise from under the deck
- greenworks 40v mower is making a horrible grinding noise when i try to mow, sounds like metal on metal.
- ego mower won't go into self-propelled mode, the button does nothing. fix?
- my honda eu2200i ran out of gas. i refilled it but now it takes like 10 pulls to start. is it broken?
- can i use my makita cordless circular saw to cut wet or pressure treated wood?
- can i connect my honda eu2200i to another generator to get more power? i have an old champion.
- ego power+ mower is leaving uncut strips of grass. blade seems fine, what gives?
- can i use a 7-1/4 inch blade on my makita xsh03z? the manual is confusing.
- ryobi one+ drill p215k1 making a weird clicking noise and then stops, is this normal?
- ryobi one+ drill p215k1 just stopped in the middle of drilling a hole, battery still has charge. what gives?
- is it safe to leave my milwaukee m18 battery on the charger all the time?
- my milwaukee m18 drill just stopped working and feels really hot, is that bad?
- the trigger on my milwaukee m18 drill driver feels sticky and sometimes doesn't work, can i fix it?
- can i turn off just the time of use feature on my ecobee without disabling all the other smart stuff?
- can i get my milwaukee drill fixed under warranty if i tried to open it up myself?
- can i use my makita cordless drill to mix paint or mortar?
- makita cordless drill making a weird grinding noise when i use it, is it broken?
- honeywell t9 won't let me set the heat above 90 degrees, is that a limit or is mine broken?
- my dewalt cordless drill is sparking a little inside near the battery when i put it in, is that normal?
- dewalt 20v max drill making a weird clicking noise when i pull the trigger in reverse
- my dewalt cordless drill is making a loud clicking noise when i start it, is it broken?
- my greenworks cordless mower makes a horrible grinding noise when i engage the blade. is the motor toast?
- dyson ball animal 2 making a loud rattling noise when i turn it on
- dyson ball animal 2 is crazy hard to push on my medium pile carpet, feels stuck
- dyson ball animal 2 is crazy hard to push on my medium pile carpet
- dyson ball animal 2 suction seems really weak, even after i empty the bin.
- the cord on my shark nv356e is a pain to rewind, it never wraps neatly. am i doing it wrong?
- the canister on my shark navigator lift-away keeps falling over when i'm trying to use it detached, it's so annoying. is mine broken?
- the hose on my shark navigator lift away professional feels like it has no suction. the upright part works fine. what gives?
- my shark navigator lift away professional nv356e is making a loud rattling noise when i turn it on, what's going on?
- my dyson v8 is making a weird pulsing sound and has no suction. help?
- the orange light is flashing on my dyson v8, what does that mean?
- dyson v8 absolute keeps shutting off after like 30 seconds, battery issue?
- ryobi p215k1 drill feels weak, like it doesn't have the power it should, even with a fresh battery. is it broken?
- my dyson v15 detect bin is stuck and won't empty
- my linksys velop wifi keeps dropping for one specific device, the light is solid yellow
- linksys velop keeps blinking purple, it's been like this for an hour, is it stuck?
- my orbi satellite keeps disconnecting from the router, the ring light turns amber. how do i fix the sync?
- moved my asus gaming router next to my pc and now my wifi is worse. can a pc mess with the signal?
- can i use my shark navigator lift away on hard floors? it seems to just blow stuff around
- canon pixma mg3620 stop button won't do anything, the light just stays on
- my asus ax86u router is getting really hot to the touch, is this normal or should i be worried?
- canon pixma mg3620 keeps flashing its alarm lamp, what's that mean?
- asus rt-ax86u setup page at router.asus.com won't load on my laptop, what do i do?
- trying to set up my new hp m234dwe with wps but it's not connecting. wireless light just keeps blinking.
- canon pixma mg3620 wireless setup is a pain, i never got the cloud printing email to register. what gives?
- can i use my netgear orbi rb752 as just an access point? i have another router
- my hp m234dwe is making a horrible grinding noise when it tries to print, is it broken?
- got a used hp m234dwe and it says 'cartridge error' or just won't print at all
- my tp-link deco's light is pulsing yellow, is it broken?
- how do i clean the print head on my epson wf-2860? the colors are all messed up
- hp m234dwe keeps saying 'cartridge problem' with brand new hp toner
- my canon pixma tr8620a is making a weird grinding noise when it feeds paper from the back. is it broken?
- my work laptop runs windows 10 pro n. will the brother hl-l2350dw work with it?
- canon pixma mg3620 print head cleaning not working, lines still missing after i tried it
- why is my epson ecotank printing really slow, like a page every few minutes?
- can I use alexa to check the ink levels on my canon pixma tr8620a?
- brother hl-l2350dw is super slow, like 10 pages a minute not 30. what gives?
- my hp officejet pro 9015e is connected to ethernet but i want to use wifi, do i need to unplug the cable?
- hp laserjet m234dwe keeps saying 'cartridge problem' or 'use original hp' but the cartridge is genuine. help?
- canon pixma tr8620a power usage seems high, is 7 watts when printing normal?
- my epson et-2800 screen is just blank, no lights, nothing. is it dead?
- why does my breading always fall off in my philips air fryer?
- i see cracks inside my philips air fryer basket, is it safe to use?
- epson et-2800 making a loud grinding noise when it scans, is it broken?
- why is there a sticker covering the usb port on my hp officejet pro 9015e? can i take it off?
- is it normal for the hp officejet pro 9015e to lose wifi connection if i try to set it up from another room?
- ninja foodi dualzone air fryer keeps tripping my kitchen circuit breaker, what gives?
- why does my canon pixma tr8620a use so much power? i can hear it humming even when it's 'off'.
- my philips air fryer just turned itself off while i was cooking, is it broken?
- can i use aluminum foil in my cosori pro le air fryer?
- my cosori l501 keeps making white smoke, is it gonna catch fire?
- my new cosori turboblaze smells like plastic when i turn it on, is this safe?
- my cosori air fryer is making white smoke, is it broken? should i be worried?
- setting up my hp officejet pro 9015e on my work laptop with a vpn, hp smart won't install. is the vpn blocking it?
- my ninja dualzone air fryer is smoking and smells burnt, help?
- ninja foodi 9-in-1 making a loud clicking noise from the hinge when i close the crisping lid, is it broken?
- my ninja foodi air fryer baskets are stuck and really hard to pull out, is this normal?
- ninja foodi dualzone air fryer making a weird clicking noise, is it broken?
- my cosori air fryer is blowing white smoke out the back, is this a fire hazard?
- my braava m6 just shuts off after 90 minutes even if it's not done, is this broken?
- ninja foodi air fryer baskets are really hard to get out when hot, any tricks?
- cosori air fryer making white smoke, is it safe?
- can i use my own floor cleaner in the braava jet m6?
- my eufy boostiq 11s seems really weak on my carpet, is it broken?
- cosori air fryer making a lot of white smoke, is it broken?
- can i use my eufy robovac on a dark colored rug? it keeps stopping or acting weird
- my eufy robovac 11s just beeps three times and has a flashing red light, what's wrong?
- can i use swiffer wetjet solution or vinegar in my braava jet m6? i ran out of the irobot stuff.
- do i need to unplug my roomba i3+ evo home base when i go on vacation?
- can i use my roomba i3+ evo to clean up a small liquid spill?
- my eufy robot vacuum is making a horrible grinding noise and then stops with four beeps
- roomba i3+ evo just beeps at me and the light ring does a red sweep towards the back. it's not emptying.
- can i use regular milk in my delonghi magnifica s for cappuccino or does it have to be special?
- why does my delonghi magnifica s keep turning off by itself?
- delonghi magnifica s steam just stops after a minute or two while i'm frothing milk. is it broken?
- the "Add Wtr" message keeps coming up on my ninja dualbrew pro but the reservoir is full, what's going on?
- my delonghi ecam22110sb is making a loud grinding noise but no coffee comes out
- ninja dualbrew pro brew basket keeps overflowing with grounds, making a huge mess. what am i doing wrong?
- ninja dualbrew pro control panel not showing any brew sizes, it's just blank
- can i use pre-ground espresso in my mr coffee 12-cup programmable machine? or does it have to be regular coffee grind?
- the drip tray on my breville barista express says empty me but it's not full, what gives?
- can i make just one cup of coffee in my mr coffee bvmc zh1b 12-cup machine or will it break it
- can i use my mr coffee bvmc-zh1b to just make one single cup of coffee? it seems wasteful to brew a whole pot.
- my mr coffee maker is leaking water all over the counter from the bottom. what do i check?
- my keurig k-classic keeps shutting off by itself, is that normal?
- can i use my keurig k-classic to just get hot water for tea or oatmeal?
- my mr coffee 12-cup programmable keeps shutting off after like 2 minutes of brewing, help?
- ninja af101 keeps shutting off mid-cook, like it just stops heating
- irobot roomba 694 just beeps and says "error" then stops. what do i do?
- can i use my keurig k-mini with a travel mug? the drip tray is in the way.
- why does my keurig mini keep shutting off by itself? is it broken?
- elite gourmet coffee maker making a loud noise and not brewing all the water
- mr coffee bvmc-zh1b making a weird gurgling noise during brew cycle, is that normal?
- my hamilton beach 2-way brewer's thermal carafe lid is stuck or something, it's not pouring right
- my elite gourmet coffee maker's carafe cracked while it was sitting empty on the warm plate, what gives?
- is the bella dots coffee maker supposed to have an auto-on feature? i can't get it to work
- the glass carafe on my mr coffee 5-cup maker feels super fragile, how do i not break it?
- my kefeya g2 is making a weird humming noise from the speakers, is this a problem?
- can I cook oatmeal in my 12 quart pressure cooker? it keeps foaming up and I'm worried.
- is it safe to put my amazon basics monitor near a window? i have limited desk space.
- yeah, my sansui monitor screen is flickering like crazy with lines, is this a goner?
- i can't adjust any settings on my dell 24 plus monitor, the buttons on the bottom do nothing. help?
- my epson ecotank et-2400 printer says it's out of ink but the tanks are still half full, what gives?
- my tramontina pressure cooker's sealing ring smells weird after making chili, can i just throw it in the dishwasher?
- t-fal clipso pressure cooker making a loud hissing noise, is that normal or is it about to explode?
- just got a barton pressure cooker and it smells weird on the first use, is that normal?
- my denali tanker canner is stuck shut, i can't get the lid off, help
- bought a used prestige 5L aluminum cooker, no manual. what's the max fill line for stuff like soup?
- trying to open my hawkins pressure cooker after cooking and the handles are stuck, won't pull apart. is it dangerous to force it?
- just got a presto 6 quart stainless steel cooker, can i use it on my glass top stove?
- calphalon 6qt pressure cooker keeps hissing really loud, is it broken?
- is it safe to open my presto pressure cooker by just lifting the rocking regulator off?
- can i use my hawkins classic on an induction stove? it's the 2 litre one.
- cosori pressure cooker making a clicking noise while it's heating, is that normal?
- my supvan bluetooth label printer keeps disconnecting from the app, it's driving me nuts
- how do i make my hp officejet pro 8125 printer quieter when it's printing
- can i use my niimbot b1 label maker while it's plugged in and charging?
- my knwon label printer is flashing red and green, is it broken?
- my epson ecotank et-2800 printer is connected to wifi but won't print from my phone, what gives?
- my canon ts4320 alarm light is flashing, how do i know what's wrong?
- my electactic mini fridge for drinks is making a loud humming noise, is it broken?
- my auertech portable washer is leaking from the bottom, anyone else have this?
- my crzoe ice maker's 'ICE FULL' light is flashing on and off every 3 seconds, what's wrong?
- just got a jeevony dv180, do i need to worry about the magnets with a smartwatch or phone?
- antarctic star ly2010-as fridge not cooling my drinks, they're just kinda cool not cold
- ninja kitchen system keeps stopping mid-blend, like it's overheating or something
- nutribullet baby is making a weird clicking noise and the motor stopped, is it broken?
- my hamilton beach 58148a blender motor sounds like it's straining but nothing's blending, help?
- ovente cordless blender making a weird grinding noise when i try to blend soup, is it broken?
- can i put the blade assembly from my ninja ultracrush in the dishwasher?
- my magic bullet keeps running after i take the cup off. the motor won't shut off.
- my nutribullet blade assembly is stuck and i can't get the cup off the motor base, how do i get it off without breaking it?
- is it normal for the water tank to smell weird when its brand new
- i spilled a little water near the monitor stand, none got inside that i saw. is it okay to just wipe it and keep using?
- is it safe to just unplug my air fryer when i'm done or is there a proper way to turn it off?
- the back of my cooler is super hot to the touch, is that normal or is it broken?
- there's frost buildup in the ice bin, can i chip it out with a knife?
- i just plugged it in and it's beeping once, is that normal?
- why is white smoke pouring out of my air fryer? is it broken?
- my coffee maker is brewing super slow, like it's taking forever to drip. how do i fix this?
- is it safe to just unplug this thing when i'm done or do i need to turn it off first?
- just moved my ice maker inside from the garage, it won't turn on. did i break it?
- trying to use the brew later timer but the button does nothing. what am i missing?
- my coffee is coming out super slow, like a drip. is it broken?