PA
Priya Anand
Try this first. Skip the rest if it works.
Priya optimizes everything, including how she answers questions. She reads manuals cover to cover so you do not have to, and she will tell you the one thing to check before you waste time on the rest.
Answers from Priya Anand
- coffee leaks from the bottom of the machine, not the carafe, onto my counter. what's happening?
- my oxo brewer turns on but the display is super dim, i can barely see the clock or buttons
- can't get the water tank off my oxo 9 cup to clean it, feels like it's locked on there
- the bloom pause on my oxo doesn't seem to do anything, water just goes straight through, is it broken?
- why does my oxo brew make a loud gurgling or rattling noise during the brew? sounds like it's struggling
- the 'keep warm' plate on my oxo brewer turns off after 40 minutes no matter what, how do i make it stay on?
- the brew cycle stops after like 30 seconds on my oxo 9 cup and just drips, coffee is super weak
- my oxo brew 9 cup just beeps and flashes 'add water' but the tank is totally full, what's the deal?
- the motor in my ratchet gets crazy hot, like almost too hot to touch, after just a few nuts. is that safe?
- can i rinse the head of my m12 ratchet under water to clean out grease and metal chips? it's packed full.
- the battery wobbles a lot on my ratchet, doesn't feel secure, and sometimes it just loses power mid-use.
- my m12 fuel ratchet feels weak, like it's not putting out the full torque it used to, battery is full.
- the led light on my m12 ratchet stays on dimly after i turn it off and pull the battery, ghosting for hours.
- my 2557 ratchet is making a horrible grinding noise when it's under load, sounds like it's eating itself, normal?
- the forward/reverse switch on my m12 ratchet is super stiff and hard to slide with one hand, is mine defective?
- my milwaukee m12 fuel ratchet just flashes red and green and won't run at all, what's wrong with it?
- my ice tastes weird and plastic-y even after cleaning, how do i get rid of the taste?
- it's leaking water from the bottom onto my counter, not from the tank connection
- machine powers on but the 'ice full' light is solid and it won't start a cycle, basket isn't even half full
- the ice cubes are coming out really tiny and thin, like slivers, not the full cubes it made before
- how do i clean this thing? the manual says to clean but it's vague and i don't want to break it.
- ice maker turns on and runs but never actually makes any ice, just runs the cycles and the basket stays empty
- antarctic star az-i11a making a loud grinding noise when it's trying to make ice, sounds like it's chewing rocks
- my antarctic star ice maker just keeps beeping and flashing the 'add water' light even though the tank is full, what's going on?
- ring app says my base station is offline but the light is solid white, what’s going on?
- my ring contact sensor shows ‘tampered’ in the app and i can’t clear it
- the siren on my ring base station is really quiet, i can barely hear it from another room
- set up my new ring alarm but the keypad won’t pair with the base station at all
- my ring keypad keeps beeping randomly in the middle of the night for no reason
- i replaced the battery in my ring contact sensor but the app still says it’s low
- the motion detector on my ring alarm keeps going off for no reason, it’s driving me nuts
- my ring base station just keeps flashing blue and won’t connect to the app, i’ve tried everything
- the digital readout for humidity is way off from my other meters, like it's reading 20% higher. can i calibrate it?
- it just stopped in the middle of the night, no power, no lights, nothing. checked the outlet and it's fine.
- how do you even clean the coil on this thing? i can't get the cover off and the manual is useless.
- my kesnos is running constantly but the humidity in the room isn't going down at all according to my hygrometer.
- the display is showing 'FL' and beeping, won't run. i've emptied the bucket and put it back in properly.
- it's making a loud gurgling or rattling noise from the bottom, sounds like rocks in a washer, not the normal fan hum.
- the pump on my kesnos isn't sending water up the tube, it just fills the internal bucket even though the hose is connected right.
- my new kesnos 120-pint just keeps cycling the power on and off every few minutes, never actually starts pulling water, what gives?
- i need to wall mount this 70 inch tv but the ports on the back are super recessed, my hdmi cables won't fit.
- webos is getting super slow and laggy, clicking an app takes forever and the home screen stutters.
- the sound from the tv speakers cuts out for a second every few minutes, it's super annoying, happens on all inputs and apps.
- my lg tv keeps turning itself on in the middle of the night, it's creepy and wasting power.
- the screen on my 70UQ7590PUB looks super dim and washed out no matter what picture setting i choose.
- how do i get the magic remote to actually control my cable box volume and power? it worked once then stopped.
- this LG tv is connected to wifi but all the built-in apps like Netflix keep buffering or saying network error, my internet is fine.
- my new LG 70UQ7590PUB keeps saying ‘no signal’ even though everything is plugged in and on, what am i missing?
- smoke pours out every time i use it, even with no food in there, and it smells like burning plastic
- the preset buttons don’t seem to change the time or temp, it just defaults to 350 for 10 minutes
- i can’t get the basket handle to click and lock into place, it just flops open
- the non-stick coating on my basket is peeling off in little flakes, is it still safe to use?
- my air fryer makes a loud humming or buzzing noise when it’s running, is that normal?
- why does my food come out soggy not crispy in this 2-liter air fryer, i followed the time and temp
- the basket on my purify air fryer is insanely hard to slide back in, feels like it’s grinding
- my black and decker air fryer won’t turn on at all, no lights or anything when i plug it in
- the blending is really weak lately, won't crush ice or frozen fruit even on the highest setting.
- blender smells like burning plastic or electrical when i use it for more than a minute.
- the pulse button on my powercrush doesn't work consistently, have to press it super hard sometimes.
- how do you clean the gunk out from under the rubber seal on the blender lid? it's gross.
- my blender makes a loud grinding noise but the blades aren't spinning, just a bad sound.
- blender won't turn on at all, no lights or noise, but it's plugged in. what do i check?
- why is my black and decker blender leaking from the bottom when i make smoothies?
- my powercrush blender lid is stuck and i can't get it off no matter how hard i twist it, anyone else?
- my soundbar just randomly turns itself off after a while even when the tv is still on, how do i stop it?
- the dialogue from movies is really hard to hear but the music and effects are too loud on my denon soundbar.
- i get a loud pop or crackle from the speakers sometimes when i change the volume or source, is it broken?
- soundbar remote isn't working, but the buttons on the bar itself are fine. changed batteries already.
- how do i clean the fabric grille on the front of my dht-s217 without damaging it?
- subwoofer just stopped working with my denon soundbar, no bass at all, it's powered on though.
- soundbar turns on but there's no sound from my tv, tried hdmi arc and optical, nothing works.
- my denon s217 soundbar just keeps flashing red on the front, no sound at all, what's wrong?
- after a power outage, the meross opener is solid red and won't reconnect no matter what i do
- the status in the app is always wrong, says door is open when it's closed or vice versa
- how do i get the meross to work with homekit? it only shows up in the meross app for me
- meross worked fine for months, now it just beeps three times when i try to use it and nothing happens
- the safety sensors show a solid red light on one of them and the door won't close from the app
- installed the meross but the wall control panel doesn't work anymore, only the app works
- meross opener keeps going offline in the app, have to keep unplugging it to get wifi back
- my meross garage opener says "open limit" in the app and won't close all the way now
- it randomly goes offline on the network and disappears from hp smart app until i restart it.
- scanner glass gets dirty so fast and leaves streaks on every scan, how do i clean it properly?
- got a 'carriage jam' error 0xc19a0023 and now it's just stuck, won't move at all.
- keeps printing blank pages or has weird streaks and gaps, even with new cartridges.
- it's making a loud grinding noise from the right side every time it prints or copies.
- the touchscreen on my officejet pro 8135 is completely unresponsive or frozen, buttons do nothing.
- setup is a nightmare, my 8135e just won't connect to wifi no matter what i try.
- my hp officejet 8135e keeps saying 'paper jam' but there's nothing stuck in there, i've checked everything.
- i factory reset my arlo go 2 and now it won't add back to my app, just says 'connection failed'.
- the arlo go 2 is beeping three times every few minutes, driving me nuts, how do i stop it?
- arlo go 2 live view takes forever to load and then constantly buffers, makes it useless.
- my arlo go 2's video at night is just a bright white blob, motion lights make it worse.
- got a new sim card for my arlo go 2, followed the steps, but it still says 'no service'.
- why does my arlo go 2 keep going offline and saying 'camera unavailable' in the app every few hours?
- arlo go 2 battery drains completely in like a day even though it's on solar, what's the point?
- my arlo go 2 just shows a solid amber light and won't connect to the app, tried restarting it a bunch.
- the bucket full light comes on when the bucket is completely empty, so it stops running for no reason.
- it won't respond to any button presses on the control panel, but the display is lit up.
- the fan is running but no air is coming out of the vents and it's not dehumidifying at all.
- the continuous drain hose setup isn't working, water just pools under the unit instead of flowing out.
- it's making a loud gurgling or water trickling noise like there's water inside the machine itself.
- the wifi keeps disconnecting on my smart ivation dehumidifier, app says offline every other day.
- my 70 pint ivation is running constantly but the bucket is barely collecting any water, humidity won't drop below 60%.
- my ivation dehumidifier just beeps and flashes 'PF' on the screen and won't start up, what's that?
- how do i clean the inside of my hl-l2460dw, there's toner dust everywhere and it's smudging pages
- pc says printer is offline but it's on and connected to wifi, how do i get it back online
- my brother printer says 'toner life end' but the cartridge is half full, can i bypass it
- the printer is making a loud grinding noise every time it picks up paper
- i can't get my hl-l2460dw to connect to wifi, it just fails every time
- why is my brother hl-l2460dw printing really faint, even with a brand new toner
- printer says 'paper jam' but i've checked everywhere and there's no paper stuck
- my brother hl-l2460dw is just flashing the drum error light nonstop, won't print at all
- the blades seem dull, takes forever to crush ice even on the ice crush setting
- kitchenaid 3 speed only works on the highest speed now, low and medium buttons do nothing
- my blender jar is stuck on the base and i can't get it off no matter how hard i twist
- how do you clean the black residue off the blender's rubber drive socket? it stains my hands
- making a horrible grinding noise only on the 'ice crush' setting, other speeds are fine
- kitchenaid k150 leaking from the bottom of the glass jar where the blades are
- blender just stopped working mid-use, now it won't turn on at all, no lights or noise
- my kitchenaid blender motor just hums loudly and the blades won't spin at all
- the dolby atmos light won't come on when i play atmos content from my apple tv 4k, it just shows 'surround'.
- how do i clean the fabric grille on the front of the sr-b40a without damaging it? it's collecting dust.
- there's a weird high-pitched buzzing or humming noise coming from the soundbar itself, not the speakers, all the time even when muted.
- the dialogue is really hard to hear in movies but explosions are too loud, even with clear voice turned on. how do i balance this?
- i get no sound from my nintendo switch or playstation when connected to the soundbar, but netflix on the tv works fine.
- soundbar turns on with the tv but the volume buttons on my samsung tv remote don't control it anymore, only the yamaha remote works.
- the subwoofer for my sr-b40a keeps disconnecting, it just goes silent and the light on it blinks. i have to power cycle to get it back.
- my yamaha sr-b40a soundbar just blinks red on the front and won't turn on or respond, what's wrong?
- after a power outage, my nexx is online but the app says 'door obstruction detected' and won't close.
- can i control multiple doors with one nexx nxg-200 unit or do i need to buy one for each door?
- i get delayed notifications or they don't come at all when my garage door opens or closes.
- the nexx device itself has a solid red light and doesn't respond. what does that mean?
- nexx worked fine for months now it's offline in the app and won't reconnect no matter what i try.
- my nexx app says my garage door is open when it's clearly closed, or vice versa. status is always wrong.
- just installed my nexx garage opener but the door won't move, the unit just clicks loudly when i press the button.
- my nexx nxg-200 won't connect to my wifi during setup, it just keeps blinking and fails. what am i doing wrong?
- the internet light on my orbi router is solid orange instead of white, i have no connection.
- after a firmware update, my orbi's 2.4GHz smart home devices all dropped off and won't reconnect.
- i get great speed right next to the satellite but it tanks when i move to the other side of the room, what's wrong?
- my orbi satellite is making a faint high-pitched whining or coil whine noise, is that normal?
- the orbi app says 'cannot connect to router' when i'm trying to set it up with my new modem.
- why does my orbi 960 keep dropping the 6GHz backhaul and switching to 5GHz, killing my speeds?
- my orbi router's ring is solid amber, the app says it's offline but my internet seems fine?
- my orbi 960 satellite keeps flashing a solid magenta ring and won't connect to the router, what do i do?
- wifi keeps dropping on my vizio smart tv, have to reboot to get it back, other devices are fine
- how do i get rid of the stupid watchfree+ channel buttons on the smartcast home screen, they're in the way
- screen is black but i can hear sound from the apps, vizio v555, tried unplugging already
- tv turns on by itself in the middle of the night, v555-j01, it's creepy and wasting power
- my vizio v-series remote just stopped working, won't turn tv on or change volume, but phone app works
- just got this tv and the audio is super quiet even with volume at 100, have to crank my soundbar
- the smartcast home screen on my v555 is so slow and laggy it takes forever to open netflix
- my new vizio v555 keeps saying 'no signal' from every hdmi port even though my roku is definitely plugged in and on
- the video quality at night is super grainy and dark on my dual lens floodlight, even with the lights on.
- i get ‘Failed to Connect to Device’ when trying to view live feed on my eufy floodlight cam.
- the floodlights on my e340 won’t turn on automatically at night anymore, even though the camera works.
- my eufy floodlight cam goes offline every few days and i have to reboot it by flipping the breaker.
- how do you clean the lenses on the eufy floodlight cam? it’s all blurry now.
- why does my eufy floodlight make a constant buzzing or humming sound? it’s driving me nuts.
- the motion detection on my eufy floodlight cam is terrible, keeps missing people right in front of it.
- my eufy floodlight cam won’t turn on at all, just dead. i wired it right, power’s good.
- installed an e130 but it seems to short cycle, runs for like 5 minutes and shuts off over and over
- how do i clean this thing? the manual is vague and i don't want to break it
- there's a rattling or vibrating noise coming from inside the cabinet when the fan runs
- my e130 is running constantly but the humidity in the house isn't going down at all
- the display works but the unit just won't turn on or start dehumidifying when it should
- water is leaking from the bottom of the dehumidifier onto my floor, not going down the drain
- i hear a loud humming or buzzing from my e130 but the fan isn't blowing, just sits there
- my aprilaire e130 just shows e1 on the display and won't run, what does that even mean?
- the probe thermometer on my ninja foodi smart grill is way off, says my steak is 160 when it's clearly still rare.
- my grill shuts off randomly in the middle of cooking, no error code, just goes dead. have to unplug and replug to restart.
- the non-stick coating on my ninja grill pot is chipping off after a few months, is this safe?
- foodi smart grill won't get hot enough, my chicken is still raw in the middle even after the time is up on the smart program.
- how do i clean the inside of the ninja foodi grill lid? grease is baked onto the heating elements and the metal shield.
- the fan on my ninja foodi grill is crazy loud and sounds like it's rattling or grinding, is this normal?
- my ninja foodi smart grill af500 just beeps three times and won't start cooking, the display is on but nothing happens when i press start.
- just got my ninja foodi smart grill and it won't connect to the app, keeps saying 'device not found' after i put in the wifi password.
- i'm trying to program the 7-day schedule but the menu is confusing and it won't let me set different times for weekdays and weekends.
- the temperature it shows is way off from the actual room temperature, like 5 degrees wrong.
- the fan won't turn off and just runs constantly no matter what i set it to.
- it's stuck in permanent hold and i can't get it to go back to following the programmed schedule.
- my schedule keeps disappearing or resetting to factory times after a power outage.
- how do i get this thing off the wall to change the batteries or look at wires? it feels stuck.
- the thermostat says 'heat on' or 'cool on' but my furnace or AC never actually kicks in.
- my honeywell t4 pro just shows a blank screen and won't turn on, no buttons work at all.
- how do i clean the inside of this microwave? the top has this brown film that won't come off with normal cleaning.
- my microwave display is showing F9 E0 or just F9, what is this and how do i fix it?
- the light under my microwave won't turn on, i've tried the button and it just clicks but no light.
- the turntable in my microwave stopped spinning, but the microwave still heats stuff. what gives?
- the vent fan on my microwave doesn't seem to suck any air or grease anymore, it just makes noise.
- i keep getting an F3 error code on the display, what does that mean and how do i clear it?
- my whirlpool microwave fan runs super loud on any speed, sounds like a jet engine even on low, is this normal?
- my whirlpool over the range microwave just stopped working, no lights no display, nothing happens when i press any buttons.
- dewalt drill won't change from forward to reverse, the selector switch feels stuck or just spins.
- there's a high pitched whining noise coming from my drill when i pull the trigger lightly, goes away at full speed.
- the battery meter on my dewalt drill only shows one bar then dies immediately, but the battery works in other tools.
- how do i clean out the vent slots on my dewalt brushless drill, it's full of sawdust.
- my drill seems weak, bogs down really easy in wood that my old drill handled fine, battery is full.
- the light on my dcd800 stays on all the time even after i let go of the trigger, drains the battery.
- dewalt 20v drill chuck keeps loosening on its own while i'm drilling, almost dropped the bit.
- my dewalt dcd800b drill just clicks when i pull the trigger, battery is charged but nothing spins.
- parental controls or device prioritization just stopped working after an app update.
- velop node is making a faint high-pitched buzzing or coil whine noise, is it defective?
- can i use my old router as a switch with the velop? i have more wired devices than ports.
- the velop app says "node unreachable" but the light is blue and wifi works.
- my internet is slow on wifi but fast when i plug in, is the velop mx5300 bottlenecking?
- velop keeps dropping devices, especially my phone and laptop, have to reconnect constantly.
- how do i get my velop to stop blinking purple? it's been doing it for an hour after i unplugged it.
- my velop mx5300 node is solid red and my wifi is gone, what do i do?
- the blender is way louder and vibrates more than it used to, sounds rough even with just water.
- there's a small leak coming from the bottom of the pitcher, right where the blade screws on.
- the 'soup' function doesn't get my soup hot, it's just warm after 6 minutes. is it broken?
- my blender suddenly stopped in the middle of making ice cream, now it smells like burning electronics.
- how do you clean the gasket under the blade? mine smells like old smoothie and i can't get it out.
- the touchscreen on my blender base is completely unresponsive, won't turn on or react to any presses.
- just got this blender and it's making a loud grinding noise but not blending, like the blade isn't catching.
- my hamilton beach professional blender's power light is flashing red and it won't start, what does that mean?
- can i clean the fabric grille on the front of my soundbar 900? it’s getting dusty.
- sound from my bose 900 sounds tinny and hollow, like there’s no bass at all, even after adaptiq.
- the bose music app says ‘setup incomplete’ for my soundbar 900 and won’t let me add it.
- my bose 900 soundbar makes a faint popping or crackling sound sometimes, is it broken?
- how do i get my soundbar 900 to work with my tv remote? the volume control does nothing.
- the voice pickup on my soundbar 900 is terrible, alexa barely hears me unless i shout.
- why does my bose 900 keep disconnecting from wifi every few days? it’s so annoying.
- my bose soundbar 900 just has a solid white light and no sound is coming out, what’s wrong?
- after a power outage my craftsman opener just blinks its light once and won't run
- the wall control panel works but the light won't turn on anymore
- the garage door goes down but immediately reverses back up without hitting anything
- i replaced the batteries but my remote still won't work with the craftsman opener
- my craftsman garage door opener just hums for a second then stops
- garage door opener works but the belt is squealing super loud
- the lights on my craftsman opener flash 10 times and it won't respond to anything
- my craftsman garage door opener clicks like it wants to work but the door won't move
- the motion on this tv looks weird and jittery during sports or panning shots, even with motionflow off. how do i fix it?
- i can't get my wifi to connect reliably, it keeps dropping or says connected with no internet on the home screen.
- the audio from the built-in speakers cuts out for a split second every so often, especially on dolby content, it's really annoying.
- my tv keeps randomly switching to the antenna input or google tv home when i'm watching something on hdmi.
- how do i clean the screen on this sony tv without ruining it? the manual is scary about chemicals.
- the power light on my sony x80l blinks red 4 times and it won't turn on at all, no picture or sound.
- just got this tv and the google tv home screen is so slow and laggy when i try to open apps, is this normal?
- my new sony kd50x80l keeps saying 'no signal' from my cable box but the box works fine on my old tv, what gives?
- how do i clean the outside of my nest doorbell without setting off motion alerts or damaging it?
- my doorbell says it's live in the app but when i click to view it just spins and never loads the stream.
- the video on my nest doorbell looks blurry or hazy all the time, especially around the edges. i already wiped the lens.
- i pressed the button on my nest doorbell but the inside chime didn't go off, how do i fix that?
- why does my nest doorbell keep telling me 'person spotted' when it's just a car's headlights at night?
- my doorbell is fully charged but it just shows a solid red light and won't connect or do anything.
- the battery on my nest doorbell dies super fast, like in a week, even with minimal activity. what's wrong?
- my nest doorbell battery just keeps going offline and coming back on wifi every few hours, how do i make it stop?
- water is leaking from the bottom of the unit, not from the bucket overflow.
- i set it to 45% but it never seems to get below 55% on its display, what's wrong?
- the fan keeps running non-stop even after it reaches the set humidity, compressor is off but fan is on.
- it's making a loud gurgling or bubbling noise, like water is running through it, is that normal?
- dehumidifier runs but doesn't collect any water, bucket stays empty after a whole day.
- my midea 35 pint dehumidifier just shows e1 and beeps, what does that mean?
- getting a 'toner cartridge problem' or 'install genuine hp toner' error right after i refilled the tank myself.
- printer goes offline randomly on my windows pc even though the wifi signal is strong.
- scans come out crooked every time from the document feeder, even if i align the paper perfectly.
- keeps saying 'out of paper' when the tray is clearly full, and the green light on the tray is blinking.
- it's making a loud grinding or clicking noise from the right side every time it picks up a sheet of paper.
- the touchscreen on my hp laserjet tank 2604 is completely unresponsive, won't tap or swipe at all.
- i just got a 2604sdw and it's printing super faint, like the toner isn't sticking, even though the tanks are full.
- my hp tank 2604sdw printer screen just says 'scanning for network' forever and never connects to wifi, what do i do?
- there's a musty smell coming from the washer, especially when the lid is closed, and it's getting on my clothes.
- the cycle keeps stopping and it says 'unb' on the display, clothes are all bunched to one side.
- the washer fills so slow it takes forever to start washing, water trickles in. my other appliances have good water pressure.
- it's leaving black greasy streaks on all my clothes, only on the agitator side, what is this and how do i stop it?
- the washer won't power on at all, no lights, no display, completely dead. checked the outlet and it's fine.
- my washer sounds like a jet engine on the spin cycle, it's a loud roaring noise that's getting worse
- suddenly getting an f21 error on my whirlpool top loader, it just drains and won't fill back up
- my whirlpool washer just keeps beeping and flashing 'lid' on the screen, won't start at all, what's the deal?
- the 'lo' pellet warning comes on way before my hopper is actually empty, is my sensor broken?
- grease is leaking from the bottom of my grill cabinet, not going into the bucket. where's it coming from?
- my wifi keeps disconnecting from the pit boss app, have to reconnect every time i want to use it.
- the auger on my pit boss is making a loud grinding noise and now it won't feed pellets.
- i get huge temperature swings, like 100 degrees over my set point, on my 1150. how do i fix that?
- why is my pit boss producing almost no smoke even on the 'smoke' setting? it's just hot.
- the fan on my pro series 1150 is running nonstop even when it's turned off, is that normal?
- my new pit boss 1150 just keeps saying 'err' on the screen and won't heat up, what's wrong?
- my dishwasher is leaking from the bottom left corner, right onto the floor.
- the sanitize light never comes on, even after a full cycle. how do i know it's working?
- the dishwasher leaves standing water in the bottom after a cycle, not draining completely.
- the control panel buttons are beeping but not responding when i press them, or they act like i'm pressing different buttons.
- dishes are coming out with white chalky film or powder all over them, especially on glasses.
- it's making a loud grinding or humming noise only during the drain cycle, sounds awful.
- just installed this ge dishwasher and it won't start at all, no lights, nothing. checked the breaker and it's on.
- my ge dishwasher gdp665synfs says 3 hours left at the start and then never counts down, just stays there forever. is it even running?
- dispensing water is really slow from my zerowater, just a trickle, even with a full tank and new filter.
- the filter light turned blue but my tds meter is still reading high, like over 006, isn't it supposed to be zero?
- water is leaking from the bottom of my zerowater dispenser, not from the spout but underneath the tank.
- my zerowater dispenser won't turn on at all, no lights, nothing when i plug it in.
- the water from my zerowater tastes weird or plasticky after i changed the filter, it didn't before.
- how do you clean the inside of the zerowater dispenser tank? it's got a weird film or scum line.
- zerowater 23 cup is making a loud gurgling or gargling sound every time i dispense water, sounds weird.
- my zerowater dispenser filter light is flashing red but i just changed the filter, it's been like 5 minutes.
- the power light turns on but absolutely nothing happens, no heat, no spin, when i press the button.
- it randomly stops spinning in the middle of curling a section, then starts again later. so inconsistent.
- the rotating part of the barrel feels wobbly and loose, is it supposed to be like that?
- my curls fall out immediately after using the spin n curl, it’s like it doesn’t get hot enough even on high.
- the clamp on my spin n curl won’t stay closed, it just pops open when i try to put hair in it.
- how do you clean the actual ceramic barrel? it feels sticky and my hair is snagging on it now.
- the curling barrel gets super hot but it won’t rotate or spin for me, just sits there heating up.
- my chi spin n curl just makes a whining noise and the barrel doesn’t spin at all, what’s wrong?
- getting a really bitter, burnt taste in every shot even with fresh beans and clean machine.
- coffee is coming out way too fast and super watery no matter how fine i grind, just a blond gush.
- the touchscreen menus are totally unresponsive or flickering, have to unplug it to get it to work.
- it’s showing ‘clean me’ but the cleaning cycle keeps failing and going back to the message.
- steam wand just drips or sputters weak steam, won’t get properly dry or powerful for milk.
- the grinder is making a horrible loud screeching noise when it runs, sounds like metal.
- keeps getting stuck on 'priming' and never finishes, just shows the little water drop forever.
- my oracle jet won’t heat up at all, just sits there cold when i turn it on. what’s wrong?
- set it up, added water, pressed power and nothing happens. no lights, no sound, completely dead.
- my euhomy makes ice fine but the 'ice full' sensor never works, basket overflows and ice goes everywhere.
- how do you actually clean the water lines in this thing? the manual just says 'clean regularly' but mine has gross pink slime.
- ice maker runs for 10 minutes then just shuts off with a beep and a flashing green light, doesn't make any ice.
- can’t get my new euhomy im-02 to stop showing a water full error even though the tank is definitely not full?
- my bullet ice maker is so loud when it drops ice into the basket, sounds like it’s breaking itself, is that normal?
- euhomy ice maker making tiny ice slivers instead of full bullets, what am i doing wrong?
- my euhomy im-02 just blinks red light forever and never starts making ice, what’s wrong?
- can i clean the outside of the cube? the matte finish feels sticky and collects dust like crazy.
- my cube feels really slow and laggy when scrolling through menus, it wasn't like this when i got it.
- the 'press and ask alexa' light on the front of my cube stays solid red and won't respond to voice.
- trying to set up the cube with my soundbar over hdmi arc and there's no sound, just video.
- why does my cube keep disconnecting from bluetooth headphones after like 20 minutes of watching?
- the fan in my new cube is super loud and whiny all the time, is this normal or is it defective?
- alexa on my cube keeps saying 'i'm having trouble connecting right now' but my wifi is fine for everything else.
- my fire tv cube 3rd gen just shows a black screen with the white amazon logo and never boots past it.
- it's leaking water onto my floor from the bottom, not from the tank, what's wrong?
- the remote control for my whynter portable ac stopped working, batteries are new.
- how do i clean the inside of this thing? i can smell mildew when it runs.
- unit turns off by itself after running for a while, not on a timer, just shuts down
- the water tank full light came on but the tank is actually empty, how do i fix this sensor?
- why does my whynter make a loud gurgling or bubbling noise, especially when i first turn it on?
- portable ac is running but not cooling the room at all, air feels barely cold coming out
- my whynter arc-122ds just shows 'e1' on the display and won't start cooling, what does that mean?
- can’t get the high pressure hose to connect to the spray gun, it just won’t click in
- pressure seems weak even on the highest setting, doesn’t blast dirt off like it used to
- the pump makes a loud knocking or banging noise, especially when i pull the trigger
- engine starts fine but then dies after about 30 seconds, like it’s running out of gas
- why is my pressure washer leaking water from the bottom of the pump when it’s running
- just got my s2200, followed the oil and gas steps, but it won’t start at all, not even a sputter
- pressure washer surges and pulses like it’s hunting for pressure, spray is inconsistent
- my briggs pressure washer starts and runs but the pump won’t engage, trigger pulls but nothing comes out
- it's leaving dark gray or black smudges on my light-colored clothes, only in certain spots.
- dryer won't turn on at all, no lights, no display, no response when i press the power button.
- the inside of the drum feels gritty and it's getting on my clothes, like sand or lint pellets.
- i get an 'e67' error code sometimes, machine stops. manual is useless, what does it mean?
- there's a high-pitched whining or whistling noise coming from my bosch dryer, sounds like it's from the back.
- dryer is taking over 3 hours for a normal load, everything is just damp, not drying on any cycle.
- new bosch heat pump dryer just beeps and shows 'door' on the display, won't start at all even though it's shut tight.
- my bosch 800 dryer keeps stopping mid-cycle and flashing 'clean filter' but the lint filter is spotless, what gives?
- the light on my pro pearl works but it doesn’t seem to get as hot as it used to, takes forever to straighten now
- there’s a buzzing or faint humming sound coming from my flat iron when it’s on, is that normal?
- why does my hair stick and pull with this iron? i thought ceramic was supposed to glide
- the temperature dial on my pro pearl spins freely and doesn’t click, i can’t tell what setting it’s on anymore
- my flat iron turns off by itself after a few minutes, the light goes out and i have to unplug it and plug it back in
- the plates on my flat iron won’t close all the way evenly, there’s a gap at the tip and it’s not straightening well
- how do you clean the ceramic plates on the pro pearl? mine have this brown gunk that’s smoking and smells awful
- my remington pro pearl flat iron won’t heat up at all, the light just stays on but it’s cold, what gives?
- i get a gas smell only when using the oven, not the top burners. is it dangerous?
- the surface burner flame is huge and yellow even on the low setting, it's sooting up my pans.
- the clock and oven controls keep resetting or flashing on my whirlpool range.
- my oven's broiler works but the bake burner won't come on at all, no clicking.
- how do i get the oven door off this wfg320m0ms to clean the glass? the manual is useless.
- the burner on my whirlpool range clicks non-stop even when it's off and cold.
- my whirlpool gas range oven won't light, i can hear the clicking but no flame.
- the touch screen menu is frozen or not responding to presses, machine is stuck
- the pucks are super wet and sloppy, not solid like they used to be
- getting an error that says 'fill water tank' but the tank is definitely full
- milk system not frothing properly, just spits out warm milk or makes a hissing sound
- machine won't turn on at all, no lights, completely dead after being unplugged for a move
- coffee comes out really weak and watery no matter what strength setting i use on the dial
- the grinder on my e8 is making a loud screeching or rattling noise when it starts up
- my jura e8 is showing 'clean machine' and won't let me brew, i just cleaned it a week ago
- the power light is on but it's not doing anything, no noise, no cycling, just sits there.
- my ice tastes weird, kinda plastic-y or like the water i'm using. how do i fix the taste?
- water is leaking from the bottom of my northair ice maker, puddle underneath.
- the ice maker turns on, runs for a bit, then just shuts off before making any ice. no lights or anything.
- it's just beeping nonstop and won't stop, no error code just constant beep beep beep.
- how do i properly clean this thing? the manual says to descale but i can't find where to put the vinegar.
- northair hzb-18f making ice but it's tiny and hollow, barely any ice in the basket after an hour
- my northair ice maker just keeps flashing the 'add water' light even though the tank is full, what's the deal?
- plug shows solid green light but the kasa app says it's offline and i can't control it
- can i use this in an outdoor outlet if it's under an eaves or covered patio?
- scheduled timer or away mode just stops working randomly, doesn't turn on/off
- plug makes a faint buzzing or humming sound when it's on, is that normal?
- the physical button on the side doesn't turn the plug on or off, only the app works
- trying to set up with alexa/google home and it says device not discovered or unresponsive
- plug randomly turns off or disconnects from kasa app, shows as offline
- my kasa smart plug shows solid red light and won't connect to wifi no matter what i do
- the timer function on my fan doesn't seem to work right, it just keeps running past the time i set.
- the fan won't turn on at all, no lights, no sound, nothing. checked the outlet and it's fine.
- my fan just shuts off randomly after a while, and the display goes dark until i unplug it.
- the remote control for my vornado fan doesn't work unless i'm right next to it.
- how do you clean this tower fan? it's got dust all inside the grill and i can't get to the blades.
- there's a loud rattling or buzzing noise coming from inside the fan, especially on higher speeds.
- my oscillating tower fan stopped oscillating, it's just pointing straight ahead now.
- my vornado tower fan is stuck on one speed and the buttons aren't responding, it's just blowing full blast.
- clothes come out of this dryer still really wet in one spot, like a damp stripe. it's not overloaded.
- the interior light stays on all the time even when the dryer door is closed, is that normal?
- my dryer stops mid-cycle and just hums like the motor is trying to run but the drum won't turn.
- the start button on my amana dryer doesn't do anything when i press it, no lights, no nothing. it's plugged in.
- there's a loud thumping or scraping noise when the dryer runs, sounds like it's coming from the back.
- the drum in my amana dryer spins but there's no heat at all, clothes just stay cold and damp.
- my ned4655ew dryer heats up but takes forever to dry even a small load, like two hours. lint filter is clean.
- my amana dryer just beeps three times and the door light flashes, it won't start at all, what's wrong?
- the auto shut off isn't working, i left it on by accident and it was still scorching hot hours later.
- the swivel cord on my hot tools iron is getting really stiff and tangled, it's annoying to use.
- my iron seems way hotter than the dial setting, it's smoking and burning my hair even on low.
- the temperature dial feels loose and spins without clicking, and the heat seems inconsistent now.
- how do i clean the gunk off the gold barrel without ruining the finish?
- the clamp on my curling iron is super loose and won't hold the hair, it just slips out.
- my pro artist iron won't heat up past barely warm, the light is on but it's not getting hot.
- my hot tools 24k curling iron's gold coating is flaking off near the clamp, is it ruined?
- the oven temperature is way off, my cookies burn on the bottom before the top is done according to the set temp.
- the surface burner knobs feel loose and wobbly, they don't have a firm click when you turn them.
- i get a faint gas smell near my range when the oven is preheating, but it goes away after it lights.
- the broiler in my ge gas range works but it takes forever to actually brown or char anything.
- my oven door is really hard to close, it doesn't latch smoothly and you have to slam it.
- the clock on my ge jgbs66rekss keeps resetting to 12:00 every time i turn the oven off.
- one of my sealed burners on my ge range has a super low flame, like a little ring, even on the high setting.
- my ge gas range oven won't heat up at all, the igniter glows but it just clicks and never lights.
- the folding mechanism feels loose and creaks a lot when i ride, how do i tighten it
- my phone won't connect to the scooter via bluetooth for the app, it just times out
- the regen braking feels super weak now compared to when i got it, is that normal
- how do i clean the apollo city 2023 properly, i'm scared of wrecking the electronics
- the turn signals on my apollo city 2023 stopped working, no lights or sound
- i'm getting error code 05 on the display and it won't move, what is that
- my scooter makes a loud clicking noise from the rear wheel when i accelerate, it's not the bell
- my apollo city 2023 won't power on at all, i charged it fully and the screen is just dead
- the steam wand is stuck, i can't turn the knob to open or close it
- how do i clean the group head? coffee gunk is building up and it's gross
- i can't get any pressure, my shot just dribbles out super fast and tastes sour
- water is leaking from underneath my machine, around the drip tray area, after i brew or steam
- the brew light on my classic pro keeps flashing on and off while i'm pulling a shot, is that normal?
- my gaggia classic pro is making a loud screeching noise when i pull a shot, sounds like it's dying
- just got my gaggia classic pro and no steam comes out, just hot water. what did i do wrong?
- water is leaking from the bottom of my vivohome ice maker, pooling on the counter
- the ice cubes are coming out really tiny, like half the size they used to be
- my ice maker won't turn on at all, no lights, nothing when i plug it in
- it's making a loud grinding or rattling noise when it's running, sounds terrible
- how do i actually clean and descale this thing? the manual is confusing
- the ice from my vivohome is really cloudy and soft, it melts super fast in my drink
- vivohome ice maker turns on, runs for a minute, then just beeps three times and shuts off
- my vivohome countertop ice maker just keeps running and making ice but never stops, it's overflowing the basket
- i tried to set a timer on my echo pop but it went off on a different echo in my house
- my echo pop randomly disconnects from bluetooth in the middle of playing music from my phone
- how do i turn off the microphone on the echo pop? i don't see a physical button for it
- my echo pop sounds tinny and distorted when i play music, especially at higher volumes
- can i clean the fabric cover on my echo pop? it's getting dusty and i'm worried about damaging it
- the light ring on my echo pop is just spinning blue and orange, it's not responding to anything
- alexa on my echo pop is constantly misunderstanding me, it hears the wake word wrong or just doesn't respond
- my new echo pop won't connect to my wifi during setup, it just keeps saying it can't find the network
- my hp07 heater turns off by itself after a while, even though i didn’t set a timer. it just stops.
- the screen on my hp07 is blank or flickering, but the fan still seems to run. can’t see the temperature or settings.
- my dyson remote control for the hp07 is completely unresponsive, even with new batteries. what gives?
- the air projection feels really weak on my hp07, even on max speed. it’s not blowing air like it used to.
- how do you actually clean the main filter on the hp07? the manual is confusing and i don’t want to break it.
- my dyson heater is making a loud rattling or grinding noise, mostly on the oscillation swing, sounds broken.
- the wifi keeps dropping on my hp07 and it won’t stay connected to the dyson link app, how do i fix it?
- my dyson hp07 just shows a solid red light and won’t turn on or respond to any buttons, what’s wrong?
- the button on my ghd styler is stuck in the pressed position and i can't turn it off
- how do i clean the ghd platinum sensor strip? the one between the plates that says 'ultrazone'
- my ghd takes forever to heat up now, like 5 minutes instead of the 20 seconds it used to
- the hinge where the arms open feels loose and wobbly on my ghd, is it going to break?
- the power light on my ghd platinum flashes red and it won't heat up, just stays cold
- why is my ghd making a quiet but annoying high-pitched whining noise when it's on? it's not the usual click
- the plates on my ghd platinum feel like they're scraping or grabbing my hair instead of gliding, it's not smooth at all
- my new ghd platinum styler just beeps at me three times and shuts off after a few seconds, i can't even style my hair
- i can't get the warming drawer on my nx60a to turn on, the button presses but nothing happens
- the 'burner on' indicator light stays lit for hours after i've turned the burner off, is my range unsafe?
- the clock on my samsung range keeps resetting to 12:00 every time i turn it off at the breaker, is this normal?
- the convection fan in my samsung oven makes a loud grinding or rattling noise only when it's on
- my oven door on the nx6511ss is crooked and doesn't sit flush on the right side, can i adjust it?
- how do i get the samsung wifi on my range to actually connect? it just keeps searching forever
- the top left burner on my nx60a clicks constantly even when it's off and not in use, driving me nuts
- my samsung nx60a range shows 'F1' on the display and the oven won't heat up at all, what does that mean?
- how do i properly clean this thing? i’m scared of wrecking the electronics with water
- the bluetooth won’t connect to the nju app anymore, it just times out searching
- the folding mechanism is stuck and i can’t get the latch to release to collapse the scooter
- the electric brake (e-abs) feels super jerky and aggressive, how do i make it smoother?
- the battery drains super fast now, like half the range it used to have, but the app says battery health is good
- my scooter makes a loud clicking or grinding noise from the front wheel when i brake or go over bumps
- getting an error 05 on my display and the motor cuts out while riding, how do i fix it?
- my new kqi3 pro won’t turn on at all after charging, the screen is just dead, what’s wrong?
- the camera on the front for obstacle avoidance seems useless, it just runs over my dog's toys and socks
- i just got it and it won't connect to my wifi during setup, the app just keeps searching forever
- the robot keeps getting stuck under my kitchen chairs or sofa, says 'trapped' in the app
- the self emptying dock is super loud and sounds like it's struggling every time it empties
- my vacuum is making a horrible grinding noise only when it's on carpet, sounds like it's eating something
- robot just beeps three times and won't dock to charge, it's just bumping into the dock
- the mop pads on my q revo maxv aren't getting wet or leaving any streaks, it's just dragging dry cloths
- my roborock q revo maxv keeps saying 'error 1' and won't start cleaning, what is that?
- the lid on my thermal carafe is impossibly hard to press to open, feels like i need two hands and it might spill.
- my machine starts brewing for a second then stops, the red light just stays on and no more water comes out.
- the half-pot switch on my kbv select doesn't seem to slow the flow at all, it brews just as fast on either setting.
- water is leaking from the bottom of my moccamaster where the base meets the tank, not from any of the obvious joints.
- the brew basket arm on my select is really stiff and hard to open and close, feels like it's going to break.
- i just got a kbv select and the coffee is coming out lukewarm, not hot at all. is it broken?
- the hot plate on my kbv select won't stay on, it just turns off by itself after a few minutes.
- my moccamaster kbv select is making a loud gurgling sound and spitting coffee grounds into the carafe, what’s going on?
- why is my ice tasting weird, kind of plastic-y or like the last thing i cleaned it with?
- it keeps giving me the E1 error code and shutting down after a few minutes.
- the power button does nothing, screen is totally dead. checked the outlet and it's fine.
- how do i actually clean this thing? the manual just says 'clean regularly' but i see mold in the corners.
- it's making a loud grinding or rattling noise, mostly during the harvest cycle when it twists the ice off.
- my ice maker just blinks the 'add water' light even though the tank is completely full.
- the ice cubes from my aglucky are coming out super thin and hollow, like shells.
- my aglucky hzb-12b ice maker is running but not making any ice at all, just humming.
- the bird's eye view feature stopped working, it just shows a gray screen or says 'feature unavailable'
- i see a solid white light on the front of my doorbell and it won't connect or do anything in the app
- the doorbell gets extremely hot to the touch, is that normal or is it going to break?
- my pro 2's motion detection is terrible, it misses people walking right up to the door or alerts me 5 minutes after they leave
- i get a 'ringing failed' message in the app when someone presses the button, and my inside chime doesn't ring
- the video on my pro 2 looks foggy or hazy all the time, especially during the day, like there's a film over the lens
- just installed my pro 2 and it's making a loud, constant buzzing or humming sound from the chime inside my house
- my ring pro 2 doorbell keeps going offline every few hours and i have to keep resetting it, what's wrong?
- the fan speed doesn't change when i press the button, it's stuck on low or high and just ignores me.
- the unit won't turn on at all, no lights on the display, i've checked the outlet and it's got power.
- how do i clean the real filter on this thing? the manual is confusing and i don't want to break the clips.
- my delonghi portable ac is blowing air but it's not cold at all, just slightly cool room temperature air.
- the remote for my pacel290hlwkc stopped working, i changed the batteries but it still doesn't do anything.
- i can't get the window bracket for my pinguino to seal right, there's a huge gap and hot air is coming back in.
- my delonghi portable ac unit keeps shutting off by itself after running for a while, the display is still on but it just stops cooling.
- my delonghi pinguino pacel290h just started making a loud buzzing or rattling noise, not the normal fan sound, what's going on?
- the knobs for my surface burners feel super loose and wobbly, like they might fall off.
- i get an f1 error code on my kitchenaid range display and then it seems to lock up or not respond.
- the oven light on my kfeg500ess won't turn on when i press the button, i've tried new bulbs.
- my oven's convection fan is making a horrible grinding or scraping noise only when the convection bake or roast setting is on.
- the large burner on my kitchenaid cooktop takes forever to heat up and doesn't get as hot as it used to.
- my oven door on the kfeg500ess is really hard to close, you have to slam it and it doesn't feel right.
- the clock on my kitchenaid range keeps resetting to 12:00 every time i turn it off, it won't keep time.
- my kitchenaid electric range oven won't heat up at all, but the display and lights all work fine.
- how do i clean my s2 pro properly, especially the deck, without messing up the electronics
- the throttle on my hiboy feels laggy or unresponsive, sometimes it doesn't engage right away
- my brake light stays on all the time even when i'm not braking, is it draining the battery
- the rear fender on my s2 pro cracked and now it rattles loudly over every bump, how do i stop the noise
- my scooter suddenly has way less power, struggles on small hills it used to fly up, battery shows full
- the folding mechanism on my hiboy is super stiff and squeaks like crazy, feels like it's gonna break
- just got my s2 pro and the app won't find or connect to the scooter bluetooth, phone just keeps searching
- my hiboy s2 pro scooter just beeps three times and won't move when i squeeze the throttle, what gives?
- after the latest app update, my dreame l40 won't start scheduled cleanings, it just sits there on the dock
- the self-cleaning mop pad feature on the dock isn't working, the pads still look dirty and smell bad after washing
- my robot just randomly disconnects from wifi every day and i have to reboot it to get it back on the app
- the mop pads aren't getting wet enough, they're just leaving faint streaks and the floor doesn't feel clean
- the auto-empty station is making a horrible loud grinding noise when it sucks the dirt out, sounds like it's going to break
- i set up the no-mop zones in the app but the vacuum just ignores them and drags the wet mop over my rugs anyway
- the robot keeps getting stuck saying 'main brush blocked' but there's nothing tangled in it, it just stops every few minutes
- my dreame l40 ultra is just saying 'charging error' in red on the screen and won't dock properly, what's going on?
- my homepod 2 makes a quiet but noticeable clicking or popping noise every few minutes, even when no music is playing.
- when i use my homepod 2 for apple tv audio, the sound is badly out of sync with the video.
- the touch controls on top of my homepod are super laggy or don't work half the time when i tap to play/pause.
- my homepod 2 randomly disconnects from wifi every few hours and siri says 'i'm having trouble connecting to the internet'.
- trying to set up my homepod 2 but my iphone just won't find it, the setup animation never pops up.
- homepod 2 gets super hot to the touch even when it's just sitting there idle, is this normal?
- why does my new homepod sound muffled or like it's underwater? the bass is fine but voices are terrible.
- my homepod 2 just has a spinning white light and won't respond to anything, even after unplugging it.
- the projector keeps switching itself on randomly in the middle of the night. it's creepy and wasting lamp hours.
- there's a weird flickering or shimmering in bright areas of the picture, looks like fine moving dots. only in hdr mode.
- the remote works super intermittently, have to point it directly at the lens and be super close. batteries are new.
- the input lag feels higher than the advertised 8.3ms, especially in 60hz hdr mode. is there a setting i'm missing?
- how do i clean the filter on this thing? i can't find any info and it's getting dusty.
- the hdmi signal keeps cutting out for a second then coming back, especially when my ps5 switches to hdr. using the included cable.
- why does my projector make a high-pitched whining or buzzing noise that changes when i go through menus? it's super annoying.
- my benq th685p just shows a solid red light on the power button and won't turn on at all, fan doesn't even spin.
- the image gets blurry around the edges after i've been using it for a while, focusing doesn't help.
- netflix and disney+ keep freezing or buffering every few minutes even though my internet is fine.
- how do you even clean the lens on this thing? i'm scared to scratch it and the manual is useless.
- the power adapter light is on but the projector itself won't turn on, no lights, nothing.
- i can't get my phone to screen mirror to the freestyle, it just says connecting forever then fails.
- the fan on my freestyle 2 is making a loud grinding or buzzing noise, it wasn't like this before.
- just got the freestyle 2, the auto keystone is totally messed up and makes the image a trapezoid, how do i turn it off?
- my freestyle projector keeps showing the error code e-c1, what does that even mean?
- my ninja's timer won't set. i press the 'program' button and nothing happens.
- the 'over ice' function on my ninja just makes hot coffee that melts all my ice.
- water is leaking from the bottom of my ninja coffee maker, underneath the unit.
- the warming plate on my cm401 gets way too hot and burns the coffee in the carafe.
- coffee tastes weak and watery from my ninja specialty even on the rich setting. what's the trick?
- i keep getting a 'clean' light flashing on my ninja cm401. i already ran vinegar through it.
- why does my ninja coffee maker make a super loud grinding noise when it's brewing? sounds awful.
- my ninja cm401 won't turn on at all, no lights, nothing. it was working yesterday.
- the ice basket is full light won’t turn off, it just keeps making ice and overflowing.
- it says it makes 26 bullets per cycle but i only get like 12 small ones, feels scammy.
- water is leaking from the bottom of the machine onto my counter, not from the tank.
- the power light is on but it’s not doing anything, no noise, no ice, just sits there.
- how do you clean this thing? the manual says something about a cleaning cycle but i don’t see a button.
- it’s making a loud grinding noise every cycle, sounds like it’s gonna break.
- ice maker runs but the cubes are super thin and hollow, they melt instantly.
- my kismile bullet ice maker keeps flashing e1 and won’t make ice, what’s that mean?
- condensation is leaking from the bottom of my midea portable ac unit, not from the drain hose, just dripping underneath.
- the remote for my midea portable ac stopped working, i changed the batteries but nothing happens.
- how do you clean the air filter on the midea duo hose ac? i can't figure out how to get the front panel off.
- my midea portable ac turns on but the compressor keeps clicking off after like 10 minutes, the room never gets cool.
- the vent mode on my midea portable ac doesn't seem to do anything, the fan runs but no outside air comes in.
- my midea map12s1tbl portable ac is so loud on the highest fan setting, it sounds like a jet engine, is this normal?
- i keep getting a water bucket full error on my midea duo hose ac and it shuts off, but the bucket is empty.
- my midea portable ac is just blowing regular air, not cold at all, the temperature in the room isn't dropping.
- the rear fender on my e300 rattles like crazy over every little bump, it's so annoying.
- my razor e300 makes a high-pitched whining noise when it runs, gets louder when i go faster.
- the battery on my e300 is dying way faster than it used to, only goes like 2 miles now.
- how do i clean my razor e300 scooter without messing up the electronics? it's really dirty.
- the throttle on my razor e300 feels sticky or doesn't spring back all the way after i let go.
- my scooter just suddenly cuts out and stops while i'm riding, but the battery light is still on.
- i hear a loud grinding or clicking noise from the rear wheel when i accelerate my razor e300.
- my razor e300 scooter won't turn on at all, no lights or anything, even after charging.
- the side brush keeps falling off during cleaning, i find it in the middle of the floor.
- it won't connect to my wifi during setup, just spins forever on the app.
- the self-washing mop pads still smell musty after a clean cycle, what's the point?
- robot says 'positioning failed' or 'laser error' and won't start cleaning.
- my x2 is mopping but it's leaving streaks and barely any water on the floor.
- the omni station isn't emptying the robot's dustbin all the way, it leaves a bunch of stuff behind.
- why does my deebot x2 keep getting stuck on dark rugs or black floor mats? it acts like there's a cliff.
- my x2 omni just says 'clean the filter' and stops working, but i just cleaned the filter yesterday.
- there's a constant high-pitched whining noise coming from my uhd50x, not the fan.
- the colors look washed out and dull when i connect my gaming pc, but my tv looks fine.
- the focus ring on my uhd50x feels loose and the image won't stay sharp, it drifts blurry.
- my projector says 'no signal' but everything is plugged in and my fire tv stick works on the tv.
- i'm getting a weird green tint or green speckles all over the image from my uhd50x.
- the fan on my optoma uhd50x is ridiculously loud all the time, even on eco mode.
- uhd50x keeps randomly losing the hdmi signal from my ps5, screen goes black for a second.
- my optoma uhd50x projector just beeps and flashes a red light, won't turn on at all.
- the charger base light is on but my toothbrush isn't charging, it just sits there dead.
- how do i clean the gross gunk that builds up where the brush head attaches?
- it makes a loud grinding noise and vibrates weird, not like it used to.
- the green light flashes after a minute of brushing, what does that mean?
- it won't hold a charge anymore, dies after like two uses on my pro 1000.
- my toothbrush turns on by itself in the middle of the night, how do i stop it?
- the brush head wobbles a lot on my pro 1000 and doesn't feel secure, is it broken?
- my oral-b pro 1000 just blinks red when i put it on the charger and won't turn on.
- my machine is grinding beans but then no water brews, just dry grounds in the filter. what do i check?
- how do i clean the inside tube where the hot water comes out on my grind and brew? it's got gross brown buildup.
- the display on my dgb-900bc is completely blank, no lights, but it's plugged in. is it dead?
- the coffee from my grind and brew tastes weak and watery no matter what setting i use, am i doing something wrong?
- water is leaking from the bottom of my cuisinart coffee maker, not from the carafe, what's the deal?
- i set the timer on my grind and brew plus but it didn't start in the morning, just had a cold carafe of water, what went wrong?
- the grinder on my dgb-900bc is making a horrible screeching noise but it still kinda works, should i be worried?
- my cuisinart grind and brew plus just shows a blinking 'clean' light and won't let me do anything else, how do i make it stop?
- it shows the 'add water' light but the tank is definitely full, i just filled it.
- the ice basket is full but it won't stop making ice, it just overflows and dumps it into the bottom tray.
- how do i actually clean this thing? the manual says to clean but it's not clear on getting into the water lines.
- it's suddenly really loud, like a grinding or vibrating noise, but it's still making ice.
- water is leaking from the bottom of the unit onto my counter, not a lot but a constant drip.
- the machine keeps beeping every few minutes but it's not flashing an error light, just the normal blue light.
- it's making ice but the cubes are tiny and hollow or look like slush, not solid squares.
- my crownful ice maker just arrived and i put water in but it won't turn on at all, no lights or anything.
- hey google command works but then it stops listening after a second, like it cuts me off.
- can i use two nest audio speakers as computer speakers via bluetooth? they keep disconnecting.
- nest audio assistant voice is way too quiet even when music volume is loud.
- my google home app says 'device is unavailable' for my nest audio but the light is on.
- how do i factory reset my google nest audio if the touch controls aren't working?
- nest audio keeps disconnecting from wifi every few hours, have to reboot it constantly.
- why does my google nest audio sound muffled and distorted at higher volumes?
- my nest audio just has a solid orange light and won't respond to anything, what do i do?
- it turns off by itself after a while and the 'full' light on the water tank is blinking
- the unit powers on but the remote does nothing, changed batteries already
- my honeywell portable ac is making a loud grinding or rattling noise when the fan runs
- how do i clean the filter on this thing, i can't find where it is
- the fan runs but compressor won't kick on, just blows room air, honeywell mo10ceswk
- water is leaking from the bottom of my honeywell portable ac onto my floor, not the tank
- my portable honeywell ac is running but blowing warm air, not cold, what's the point?
- my honeywell portable ac just shows E1 on the display and won't run at all, what is that?
- the dirty water tank fills up way too fast, like after one small mopping job, but the floor wasn't that dirty.
- the robot keeps getting lost and says 'positioning failed' in the middle of a clean.
- it's making a loud grinding noise when it's vacuuming, sounds like it's coming from the roller.
- my narwal freo won't connect to wifi during setup, it just times out.
- the vacuum suction seems really weak all of a sudden, it's not picking up crumbs.
- the dock is giving me an error that says 'cleaning tank not installed' but it's definitely in there.
- the robot is mopping but leaving streaks and wet lines on my floor, it's not drying properly.
- my narwal freo x ultra just keeps beeping and flashing a red light, it won't start cleaning.
- the battery life on my diamondclean smart seems terrible now, dies after one brush.
- how do i clean the mold or gunk out of the tiny holes on the charging base?
- the intensity settings on my 9700 don’t seem to change anything, it always feels the same.
- the travel case won’t charge my philips sonicare 9700, the light on the case doesn’t come on.
- my diamondclean smart is making a loud grinding or rattling noise, not the usual hum.
- my brush head feels like it’s wobbling loose on my 9700 handle, it doesn’t seem secure.
- the app won’t find my philips sonicare 9700 no matter what i do, bluetooth pairing fails.
- my diamondclean smart 9700 just blinks red three times and won’t turn on, what does that mean?
- the ice maker on my lg fridge stopped making ice, it's not jammed and the freezer is plenty cold
- how do i clean the drip tray and evaporator coil on this lg fridge, i can smell something musty
- the smart features on my lg fridge won't connect to wifi anymore, it was working fine before
- the freezer on my french door lg is cold but the fridge section is warm, like 55 degrees
- my lg fridge says 'filter' on the display but i just changed it a month ago
- the water dispenser on my lg fridge just sputters and dribbles out, no pressure at all
- the doors on my lg french door fridge won't stay closed, they just pop open a few inches on their own
- my lg smart fridge is making a super loud clicking noise every few minutes from the back, sounds like a machine gun
- water is leaking from the bottom of the machine onto my counter, mostly when it's brewing
- i get an 'oops something went wrong' error in the app when trying to schedule a brew, but the machine is online
- all the sudden my coffee is coming out lukewarm, not hot, even on the strongest setting
- the 'add water' light is on but the reservoir is completely full, it won't brew
- it's making a loud grinding noise when brewing, sounds like it's struggling, and my coffee cup is only half full
- my smart brewer keeps disconnecting from wifi and the app says offline, i have to keep re-adding it
- keurig supreme plus smart shows 'descaling' on the screen and won't let me brew anything, how do i make it stop
- my new k-supreme plus smart just arrived but when i plug it in the screen says 'prime line' and nothing happens when i press buttons
- it keeps flashing the 'add water' light even though the reservoir is definitely full.
- the full basket light comes on when the basket is only half full, so it stops making ice.
- the ice tastes kinda plasticky or funny, even after running it a few times.
- how do you actually clean this thing? the manual says to clean it but the parts don't seem to come apart.
- it's making a loud grinding or rattling noise when it's harvesting the ice, sounds terrible.
- my ice is coming out super thin and hollow, like shells, and the basket is barely filling up.
- the ice maker is running but it's not making any ice, just humming and the water pump sounds weird.
- my frigidaire countertop ice maker just arrived and it won't turn on at all, no lights, nothing.
- the blue light ring on my echo studio is always on and won't turn off, even when i mute the mic.
- i grouped my echo studio with other echos for multi-room audio but there's a bad echo or delay between them.
- the volume on my echo studio is really low at the max setting, it used to be way louder.
- how do i clean the fabric on my echo studio without damaging it? it's collecting dust.
- alexa on my studio keeps saying 'sorry, i'm having trouble connecting to the internet' but my phone is on the same wifi and works fine.
- my echo studio makes a loud popping or crackling sound, especially when it first powers on or when audio starts.
- why does my echo studio sound tinny and hollow, like all the bass is gone?
- my echo studio just has a spinning orange light and won't connect to wifi during setup, what do i do?
- my unit is vibrating a lot and walking across the floor on its casters when the compressor kicks on.
- trying to install the window bracket and the adjustable panel is way too narrow for my window, it doesn't extend enough.
- the remote for my lg portable ac just doesn't work anymore, but the buttons on the unit are fine.
- it's making a loud gurgling or water trickling noise, mostly when it first starts or stops. sounds broken.
- the exhaust hose connection at the back of the unit feels loose and hot air leaks into the room, is this normal?
- how do you clean the filter on this thing? i can't find where it's at on my lg portable ac.
- lp1018wnr keeps turning off by itself after running for a while, not on a timer, just shuts down.
- my lg portable ac is blowing but the air is barely cool, it's like a fan, what's the point?
- the wireless hdmi feature (miracast) on my epson 2350 is super laggy and keeps disconnecting.
- there's a weird yellow or brownish blob/stain in the corner of the image from my epson 2350, it's not the source.
- my epson 2350 projector keeps randomly turning off by itself after 20 minutes or so.
- the hdmi arc port on my epson 2350 doesn't send sound to my soundbar, it's just silent.
- i can't get the keystone correction to work right on my epson 2350, the image is still a trapezoid.
- the colors on my 2350 look really washed out and dim, especially reds, it didn't used to be like this.
- my epson home cinema 2350 makes a loud rattling or grinding noise from the fan area, it just started.
- my epson 2350 projector is on but the screen is totally black, no image at all. what's going on?
- how do i clean the gross gunk out of the little gap where the brush head attaches?
- io9 battery dies super fast, like in less than a week, but it shows full when i charge it.
- the smart pressure sensor light is always red even when i'm barely touching my teeth.
- my oral-b io 9 turns on by itself in the middle of the night, it's creepy.
- why does my new io9 brush head feel like it's stuttering or vibrating weird instead of smooth?
- the magnetic charger for my io9 doesn't seem to hold the toothbrush anymore, it just slides off.
- io series 9 won't connect to the app no matter what i do, it just spins forever.
- my oral-b io 9 just flashes a red exclamation point and won't start brushing, what is that?
- water dispenser on my samsung is really slow, just a trickle. the water line is fine and the filter is new.
- how do i turn off the annoying door alarm on my samsung refrigerator? it beeps if i have it open for 30 seconds.
- the fridge section of my samsung is too warm but the freezer is fine. i have it set to 37 but it reads 45.
- the display on my samsung fridge is completely blank, no lights, but the fridge seems to be running cold.
- my samsung fridge doors won't stay closed, they pop open an inch on their own. it's driving me crazy.
- the ice maker in my rf28t5001sr just stopped making ice. the light is on but it's not doing anything.
- water is pooling in the bottom of my samsung french door fridge, under the crisper drawers. it's not coming from the doors.
- my samsung french door fridge is making a loud buzzing noise that comes and goes, especially from the back, what is that?
- the remote that came with my s95c feels cheap and the solar charging doesn't seem to work, it's always dead.
- the smart hub on my samsung is so slow and laggy, apps take forever to open, do i need to reset the whole thing?
- my tv makes a faint clicking sound every few minutes, it's not the speakers, it's coming from the back of the panel.
- how do i clean the screen on this oled without damaging it? the microfiber cloth just smears fingerprints.
- i'm getting terrible wifi dropouts on my samsung s95c, netflix buffers constantly even though my other devices are fine.
- the picture on my s95c looks weirdly dim and washed out in hdr, especially in game mode, is something wrong?
- my qn55s95c keeps turning itself on randomly in the middle of the night, it's creepy and wasting energy.
- my new s95c just arrived and the screen is completely black, but i can hear sound from the apps, is the panel broken?
- can i use the air fryer lid while the instant pot base is still hot from pressure cooking? i want to crisp something right after.
- my instant pot is leaking steam from around the lid when it's supposed to be sealed for pressure cooking.
- the air fryer function isn't crisping my food, everything comes out soggy even when i follow the time in the recipe book.
- the display on my duo crisp is completely blank, no lights, even though it's plugged in. won't turn on at all.
- how do you clean the inside of the air fryer lid? grease and crumbs are stuck up in the heating element area.
- i keep getting a burn message on the display when i'm trying to pressure cook something like chili or pasta sauce.
- why is my air fryer lid making a super loud rattling or whirring noise that sounds like something's broken inside?
- my instant pot duo crisp lid won't lock into place and just spins, it won't let me start pressure cooking.
- the buttons on my ninja base are not responding well, i have to press really hard or multiple times for it to start.
- i can't get the blender blade out of the bottom of the container to clean it, it's stuck on there super tight.
- the auto-iq smoothie program stops way too early and my smoothie is still chunky, what's the point?
- the food processor bowl on my kitchen system leaks from the bottom when i'm making dough or something wet.
- my ninja professional plus won't turn on at all, no lights, nothing. i checked the outlet and it's fine.
- how do you get the smell out of the ninja blender lid? it smells like garlic or onion and makes my smoothies taste weird.
- the motor on my bn801 sounds like it's straining really bad, like a loud whining or grinding noise, when i try to crush ice.
- how do i get the soundbar to turn off automatically with the tv? it just stays on in standby.
- there's a weird popping or crackling sound from the speakers sometimes, especially during quiet scenes.
- my soundbar won't connect to bluetooth from my phone anymore, it just says pairing failed.
- is there a way to clean the fabric cover on the s800b without damaging it? it's collecting dust.
- the voices in movies are way too quiet but explosions are loud on my hw-s800b, how do i fix this?
- soundbar turns on with the tv but the volume buttons on my samsung remote do nothing, have to use the soundbar remote.
- why does my ultra slim soundbar keep disconnecting from wifi? i have to keep adding it in the smartthings app.
- my samsung s800b soundbar just flashes red on the front and won't play any sound, what's wrong?
- the wall control panel for my garage door opener is dead, no lights or anything
- my liftmaster opener keeps disconnecting from the app every few days, it's really annoying
- i can't get my car homelink to work with the new 84501 opener, the light just flashes
- the light on my liftmaster won't turn off automatically anymore, it just stays on
- my garage door only opens like a foot then reverses and goes back up
- how do i reset the wi-fi on my liftmaster smart opener? it just shows offline in the app
- liftmaster 84501 opener is super loud and grinding when it goes up and down, sounds terrible
- my liftmaster garage door opener just blinks the light and won't close, it beeps like 10 times when i try
- trying to set up aimesh with another asus node but the ax86u pro won't find it, the search just times out.
- my internet speed through the router is half what i get directly connected to the modem, even on ethernet.
- the guest network on my ax86u pro just disappears after a few hours, have to reboot to get it back.
- i keep getting 'your connection is not private' errors on some devices after setting up this router.
- my asus router's fans are loud and spin up constantly, it sounds like a laptop under load, is this normal?
- the 2.4ghz wifi on my ax86u pro is super slow, like 20 mbps when i pay for 500, but 5ghz is fast.
- just got this router and the internet light is solid red, no connection even though my modem is fine.
- my new asus rt-ax86u pro keeps dropping the 5ghz wifi signal randomly, but the 2.4ghz is fine, what gives?
- i get a 'video recording failed' notification from my floodlight cam pro all the time. what's wrong?
- my floodlight cam pro's lights won't turn on with motion anymore, they only work if i manually turn them on in the app.
- the live view on my floodlight cam pro is super laggy and pixelated, even though my internet is fine.
- how do i clean the lens on my floodlight cam pro? it's all blurry from spider webs and dirt.
- why does my ring floodlight cam pro keep going offline every few days? i have to flip the breaker to get it back.
- my floodlight cam pro makes a loud buzzing or humming noise constantly, it's driving me nuts.
- the motion detection on my floodlight cam pro is terrible, it misses people walking right up to my door.
- my ring floodlight cam pro just shows a solid white light on the front, it won't connect or do anything else.
- the bucket is full light comes on immediately after i empty and put it back in, it's not even close to full
- my dehumidifier is freezing up, there's ice all over the coils inside, what causes that?
- the control panel on my frigidaire dehumidifier is totally dead, no lights, nothing, but it's plugged in
- my dehumidifier is making a loud gurgling or bubbling noise, like water is running through pipes, is it broken?
- how do i clean the filter on my frigidaire dehumidifier? i can't find where it even is
- the fan runs but my ffad2233w1 isn't pulling any water out of the air, it's been running for days dry
- my frigidaire 22 pint dehumidifier just beeps three times and shuts off right after i turn it on, what's that about?
- craftsman drill charger light is on but my battery isn't charging. what do i do?
- my dewalt impact driver bit keeps falling out of the chuck, how do i lock it in?
- the clutch settings on my avid power driver don't seem to do anything, it just drives screws all the way in. how do i set it?
- my avid power 12v cordless drill set won't turn on at all, battery is charged. what gives?
- can i use a bigger battery, like a 40v, on my 20v dekopro drill to get more power?
- my dekopro drill won't turn on at all, just dead. what gives?
- my dekopro drill battery isn't charging, the charger light stays red for hours. bad battery?
- my dekopro drill is stuck in reverse, how do i switch it back to forward?
- my black and decker avid power drill smells hot and suddenly turned off
- frigidaire ice maker ice full light is on but the basket is only half full. help?
- milwaukee drill bit keeps getting stuck and binding in metal, what am i doing wrong?
- gowise 7-quart air fryer fries are coming out soggy, not crispy. how do i fix this?
- water is leaking from my breville bambino plus around the portafilter when i pull a shot. help?
- ge profile dishwasher not drying my plastic stuff at all, everything else is fine.
- the ice is coming out wet and clumping together in a solid block in the basket
- it says it makes 26 lbs per day but mine is way slower, takes hours to fill the basket
- how do i clean the inside water lines? my ice tastes like plastic or old water
- water is leaking from the bottom of my homelabs ice maker, puddle underneath
- the power button light is on but nothing happens, no noise, no ice, just sits there
- why is my homelabs only making tiny, thin slivers of ice instead of the normal cubes?
- ice maker making a loud grinding noise when it drops ice into the basket, sounds like it's chewing plastic
- my homelabs ice maker just keeps blinking the red 'add water' light even though it's full, what's wrong?
- the auto-iq soup program keeps stopping early and just flashes, it never gets to the hot part.
- the blender leaks from the bottom of the pitcher every time i make a liquidy smoothie.
- i tried making nut butter and now the blades won't spin at all, just a humming noise.
- the touchscreen controls on my ninja are unresponsive or beep randomly when i'm not even touching it.
- my foodi blender base gets really hot to the touch near the vents, is that normal or is it gonna burn out?
- how do you actually clean the stupid rubber gasket around the blade? it always has gunk stuck under it.
- the motor on my ss401 sounds like it's straining and the whole unit walks across the counter when i blend ice.
- my ninja foodi blender just flashes the word 'lid' on the screen and won't start, what gives?
- it sounds like there's gravel rolling around inside my jigsaw when i shake it.
- shoe on my jigsaw is wobbly and won't stay square, how do i lock it down?
- the led light on my jigsaw stays on dimly even after i take the battery out.
- dust blower on my dcs334b doesn't seem to work, my cut line is always covered.
- why is there a burning smell coming from my dewalt jigsaw when i'm cutting?
- jigsaw vibrates way too much and wanders off line, makes cutting straight impossible.
- dewalt dcs334b blade keeps falling out or coming loose during use, i tightened the lever.
- my dewalt jigsaw just quit in the middle of a cut, no power or light at all. battery is charged.
- when i switch between the two speeds, the lever feels grindy and doesn't always fully engage, sometimes it pops out of gear
- drill gets really hot right behind the chuck after just a few minutes of use, too hot to touch
- the led worklight on my makita drill stays on all the time even after i release the trigger
- my drill makes a high-pitched whining or buzzing sound when the trigger is pulled partway but it's not spinning
- the forward/reverse switch on my xfd131 is super stiff and hard to slide with one thumb
- drill seems weak on a fresh battery, struggles with basic 3 inch screws where it used to be fine
- makita 18v lxt drill chuck gets loose while drilling and the bit slips, even when i crank it tight
- my makita xfd131 drill is fully charged but it just clicks once and won’t spin when i pull the trigger
- every time i turn my pc off, the monitor goes into this deep sleep and won't wake up with mouse movement, have to power cycle it.
- the built-in speakers sound really tinny and quiet, is there a setting i'm missing to make them louder?
- can i clean the screen on this thing with a microfiber cloth or will i ruin the coating?
- how do i get 4k 60hz from my nintendo switch on this monitor? it's stuck at 1080p.
- the remote control for my benq monitor works super inconsistently, have to point it perfectly. is the sensor bad?
- why does my monitor make a faint high-pitched buzzing or whining noise, mostly on bright screens?
- the hdr on my ew3280u looks washed out and grey when i turn it on in windows, is it broken?
- my benq ew3280u monitor says 'no signal' even though my macbook pro is plugged in via usb-c, what gives?
- i'm trying to install my kono and it won't turn on after wiring, just a blank screen
- my a/c short cycles, turns on for like 2 minutes then shuts off and repeats constantly
- i replaced batteries but the thermostat still says 'low battery' and won't connect to wifi
- the touch screen on my kono is super laggy or registers the wrong button
- how do i get my lux kono off this stupid schedule, i just want to turn it up and down manually
- thermostat says 'heat on' or 'cool on' but no air is coming out of my vents
- kono keeps losing wifi connection, says offline in the app every other day
- my lux kono thermostat screen is completely black, won't wake up when i touch it
- my ecobee premium keeps switching to 'away' mode when i'm definitely home and moving around
- how do i clean the air quality sensor on the ecobee premium? it says my air is poor but i just cleaned the house
- ecobee premium says it's heating but no heat is coming out, the furnace isn't firing up
- the touchscreen on my ecobee premium is totally unresponsive, can't swipe or press anything
- installed my ecobee premium but now the a/c won't turn off, it just runs constantly
- why is my ecobee premium making a quiet but constant high pitched buzzing noise from the wall plate?
- ecobee premium keeps losing wifi connection every few hours, have to keep reconnecting it
- my ecobee premium says 'no power to rc detected' and the screen is blank, what do i do?
- google home app says my nest wifi is offline but my internet is actually working fine
- i have a nest wifi router and point but my devices in the backyard still get terrible signal
- the white light on my nest wifi point is slowly pulsing and it's not showing up in the app
- my internet speed is fine but my nest wifi randomly drops connection for like 30 seconds then comes back
- nest wifi setup fails every time saying it can't find my point during the add device step
- why does my phone keep switching to the weaker nest point instead of staying on the main router?
- nest wifi point gets really hot to the touch, is that normal or is mine defective?
- my nest wifi router has a solid red light, it's been like that for an hour and i can't get online
- my ink levels show full one day and empty the next on my xp-4205, it can't be right.
- printer says 'out of paper' when there's definitely paper loaded in the tray.
- scanner on my xp-4205 won't work, says 'communication error' when i try to scan.
- it's making a horrible grinding noise when it prints, like it's chewing on plastic.
- the power light is on but nothing happens when i press any buttons, it's totally unresponsive.
- setup keeps failing, my computer won't find the xp-4205 on wifi no matter what i try.
- why is my epson xp-4205 printing super faint even with brand new cartridges?
- my xp-4205 printer keeps flashing all the lights at once and won't print, what's going on?
- the automatic document feeder on my canon jams on every single page, it just crumples them up inside
- scans to my computer are coming out huge, like 10MB per page, and they take forever to email
- why is my printer printing really faint, especially down one side of the page, even with full toner?
- the touchscreen on my mf453dw is completely unresponsive, buttons don't work, it's just frozen
- i keep getting error e813-0000 on the screen and the printer just stops, what does that mean?
- my canon laser printer is making a horrible grinding noise from the back whenever it prints or copies
- just set up my mf453dw and it won't connect to wifi, it sees the network but fails every time i put the password in
- my new canon mf453dw keeps saying toner low right after i put in a brand new cartridge, it's definitely genuine
- the timer counts down but the food is nowhere near done, it seems to be running too cool
- how do you clean the inside top part above the basket? it's got greasy splatter and i can't reach it
- i just got it and the display won't turn on at all, no lights, nothing when i plug it in
- food at the bottom of the basket is burning while the top isn't cooked, even when i shake it
- the non-stick coating on my basket is peeling off after a few months, can i still use it?
- my air fryer makes a loud clicking or ticking noise the whole time it's running, is that normal?
- the basket on my 8 quart turbofry is stuck, i can't pull it out of the unit
- my chefman turbofry just beeps three times and the display flashes F1, it won't start cooking
- i get a bitter, burnt taste no matter what coffee or setting i use on my ninja cp307.
- the warming plate isn't keeping my coffee hot, it goes cold in like 20 minutes.
- coffee keeps overflowing out of the basket and making a huge mess every time i brew a full carafe.
- my iced coffee comes out lukewarm and weak, it's not brewing hot enough for the ice to not melt everything.
- the 'clean' light is on solid and i can't get it to turn off no matter what buttons i press.
- why won't my ninja brewer turn on at all? no lights, nothing, even though it's plugged in.
- my cp307 is making a super loud grinding noise when it's trying to brew, sounds like it's going to break.
- my ninja hot and cold brewer just keeps blinking and says 'add water' but the reservoir is totally full, what gives?
- it takes forever to heat up for the first coffee in the morning, like 5+ minutes.
- the milk frother carafe leaks from the bottom when it's running, making a mess on the base.
- when i lift the handle to put a k-cup in, old wet grounds spill out into the drip tray area.
- the 'descale' light came on and won't go off even after i ran the descaling cycle.
- brews a super weak coffee no matter what k-cup or size i pick, like barely colored water.
- my machine won't turn on at all, no lights, nothing. checked the outlet and it's fine.
- trying to use the milk frother on my k-cafe and it just makes a weak gurgling noise, barely any foam.
- my keurig k-cafe special edition just shows 'add water' but the reservoir is completely full, what's the deal?
- it takes forever to fill, like 15 minutes just to get enough water to start washing.
- the washer is off balance every single load, it thumps and stops during spin.
- why does my ge top load washer smell like mildew, i just cleaned it with affresh last week.
- my washer won't drain at all, it's just full of water and humming.
- the lid on my ge gtw685 won't lock, it just clicks and the light flashes, it won't start.
- i keep getting an su error code on my ge washer, it fills but then just stops.
- why is my gt wash machine making a super loud grinding noise during the spin cycle?
- my ge top loader just shows 'PF' on the display and won't do anything, what is that?
- after washing my area rugs, the crosswave is leaking water from the bottom near the brush.
- the dirty water tank fills up with clean water almost immediately, it's not sucking up dirt.
- i just got this and it won't turn on at all, no lights or sounds, is it doa?
- the brush roll on my 1785a just stopped spinning mid-use, now it makes a humming noise.
- my crosswave smells terrible, like mildew, even after i empty the dirty tank.
- the clean solution isn't spraying from my crosswave anymore, the brush just spins dry.
- why is my bissell crosswave leaving streaks and dirty water behind on my floor instead of cleaning it?
- my crosswave just blinks a red light and beeps at me when i try to vacuum, what does that mean?
- the click-in dock keeps falling off the wall, the screws just pull right out of drywall.
- the suction feels weak even after cleaning the filter and checking for blockages.
- my vacuum makes a high pitched whistling or screeching noise, mostly when tilted back.
- the bin is full but it won't empty all the way, there's always stuff stuck in the top part near the cyclone.
- how do i clean the filter on this thing? the app says there's a maintenance alert.
- dyson v15 battery drains crazy fast, like 5 minutes on medium, but says it's fully charged.
- the laser on my detect won't turn on anymore, just the regular led light works. did it burn out?
- my dyson v15 just shuts off after a few seconds on carpet, like it's overheating or something.
- so much grease is pooling in the bottom of my woodwind under the drip tray, is that normal?
- the slide and grill feature for the sidekick isn't getting hot enough, takes forever to boil water.
- my grill just shuts off randomly during a long cook. no error code, just goes dead.
- the temperature on my woodwind swings like crazy, +/- 50 degrees, can't hold steady at all.
- my pellet grill makes a loud clicking or grinding noise from the fan area, sounds terrible.
- getting an erl error on my woodwind wifis controller mid-cook, temp plummets. what's that mean?
- just got my woodwind and it won't connect to wifi, the app just spins forever. my phone is right next to it.
- my woodwind wifis auger just keeps turning and turning and won't feed pellets right, it's like it's stuck.
- just assembled my new ironwood 650 and it won't power on at all, no lights, nothing
- pellet hopper on my ironwood says it's empty on the app when it's clearly full
- the fan on my ironwood runs non-stop, even hours after shutdown, is that normal?
- how do i stop insane amounts of grease from pooling in the bottom of my ironwood 650?
- my ironwood won't get above 300 degrees, just sits at like 250 even when set to 400
- there's a loud clicking or grinding noise coming from the bottom of my ironwood during startup
- traeger app says my ironwood is offline but it's right next to the router, won't connect
- my ironwood 650 just shows 'err' on the screen and won't start, what's wrong?
- the exhaust hose connector feels loose and hot air is leaking into the room at the unit.
- the fan speed won't change when i press the button, it's stuck on low.
- it's leaking water onto my floor from the bottom, not the drain plug.
- the remote works sometimes but then it just stops responding, do i need new batteries?
- how do you clean the filter on this thing? i can't find where it is.
- it's making a loud gurgling or water sloshing noise, is that normal?
- why is my portable ac blowing air but not cooling at all? it's just a fan now.
- my whynter arc-14s just flashes 'fl' and won't turn on, what is that?
- hue dimmer switch is laggy, takes like 2 seconds to turn the lights on or off.
- my hue light strip plus the colors are different at one end, it looks pink when set to white.
- trying to add a new hue bulb but the app just won't find it, i've tried the serial number search and it fails.
- hue bridge keeps disconnecting from the internet, the second light goes out, and my automations stop working when i'm away.
- the colors on my hue bulbs look washed out and not vibrant like in the ads, especially the greens and blues.
- my hue lights keep randomly turning on by themselves in the middle of the night, it's creepy.
- one of my hue bulbs is unresponsive in the app, it's just stuck on white and won't turn off with the switch either.
- just got my hue starter kit, the bridge won't connect to my wifi, the third light just keeps blinking forever.
- when i play music, my nest mini gen 2 crackles and distorts at medium volume, is it blown?
- i'm trying to set up a nest mini 2 but the google home app just won't find the device during setup.
- my nest mini's microphone seems broken, it doesn't hear me unless i'm right next to it yelling.
- how do i clean the fabric on my nest mini 2 without ruining it? it's getting dusty.
- the lights on my nest mini are spinning orange forever and it won't respond to 'hey google'.
- why does my nest mini sound muffled and quiet all of a sudden, like the bass is gone?
- my google nest mini keeps disconnecting from wifi every few hours, have to reboot it constantly.
- my nest mini gen 2 won't turn on at all, no lights, tried different outlets, what gives?
- the control panel buttons are beeping but not responding when i press them.
- it's blowing out air that doesn't feel warm at all, i thought dehumidifiers made warm air?
- i'm trying to use the continuous drain hose but water is still filling the bucket.
- the fan keeps running after i turn the unit off or unplug it, is it haunted?
- my dehumidifier is making a loud gurgling or bubbling noise, is that normal?
- how do i clean the actual inside of my vremi 4500? the manual is vague and i'm scared to break it.
- vremi dehumidifier is running but not collecting any water, what gives?
- my vremi dehumidifier just shows a continuous red light and won't run, what's that mean?
- ice is building up all over the coils inside even though the room is like 70 degrees. what's going on?
- it runs but collects barely any water, maybe a cup a day in my damp basement. used to work fine.
- the continuous drain hose option isn't working, water just fills the bucket instead of going out the hose.
- it won't turn on at all, no lights, nothing. checked the outlet and it's fine.
- how do i clean the filter on this thing? i can't find it in the manual and the front grill doesn't seem to come off.
- the display says 'hi' or 'lo' and won't start dehumidifying, what does that mean?
- why is my homelabs 4500 so loud? it makes a constant rattling or buzzing noise, not just the normal fan sound.
- my homelabs dehumidifier runs for a few minutes then shuts off and the red 'bucket full' light comes on but the bucket is totally empty.
- craftsman opener won't turn on at all, no lights, no sound, nothing. checked the outlet and it's live.
- myq says my garage door is open when it's clearly closed, so i get false alerts.
- the wall control panel just flashes and doesn't open the door, but my remote works fine.
- how do i reset the travel limits on my craftsman 57918 after installing a new door?
- opener makes a loud grinding noise when going down but is fine going up.
- why does my craftsman smart opener keep disconnecting from wifi and the myq app?
- craftsman garage door opener is beeping non-stop for no reason, how do i make it stop?
- my craftsman smart garage door opener 57918 just has a solid blue light and won't respond to the remote or wall button.
- can i use the ring indoor cam gen 2 outdoors if i put it under an eave? it's not getting wet
- i unplugged my ring indoor cam to move it and now it won't turn back on, no lights at all
- the live view on my indoor cam gen 2 is super laggy and choppy, takes forever to load
- my ring indoor cam 2 won't record motion even though i walk right past it, sensitivity is all the way up
- how do i clean the lens on my ring indoor cam 2 without smearing it or breaking it
- why does my indoor cam gen 2 keep going offline every few hours even though my wifi is fine
- ring indoor cam 2nd gen making a constant high pitched buzzing sound, it's driving me nuts
- my ring indoor cam gen 2 is stuck on a solid white light and won't connect to the app, i've tried restarting it
- the audio on my wyze cam v3 is super quiet or full of static, can't hear anything
- i get a 'device verification failed' error when trying to add my wyze cam v3
- the night vision on my wyze cam v3 is all white and washed out suddenly
- my wyze cam v3 won't record events even though it says it's detecting motion
- how do i clean the lens cover on my outdoor wyze cam v3? it's all foggy and blurry
- why does my wyze cam v3 keep going offline every few hours?
- wyze cam v3 making a constant high-pitched buzzing noise, is it broken?
- my wyze cam v3 just has a solid yellow light and won't connect to the app, i've tried resetting it
- the partyboost feature isn't working, my charge 5 won't connect to my friend's flip 6
- my jbl charge 5 sounds tinny or like the bass is completely gone after i dropped it
- the usb-c port on my charge 5 feels loose and the cable falls out or won't charge reliably
- can't get my charge 5 to enter pairing mode, the bluetooth light just isn't blinking
- my charge 5 battery drains super fast even when it's turned off, like overnight
- how do i clean the fabric grill on my charge 5 without ruining it? it's got dust and a small stain
- jbl charge 5 making a weird crackling or static noise during playback, especially at higher volumes
- my jbl charge 5 speaker won't turn on at all, it's completely dead even after charging
- the dialogue from my vizio m512 is really hard to hear but explosions are too loud, even with truvolume on
- my soundbar says 'no signal' on hdmi arc but my tv audio output is definitely set to arc
- the display on my m512a-h6 is way too bright and distracting in a dark room, can i turn it off
- there's a constant faint hissing or static noise coming from the soundbar speakers even when muted
- my vizio soundbar m512a-h6 won't turn on with the tv anymore, have to use the remote every time
- the rear speakers on my m512a-h6 are way too quiet compared to the soundbar, even at max volume
- why does my vizio m512a-h6 keep switching sound modes on its own when i'm watching a movie
- my vizio m512a-h6 subwoofer just stopped making any bass sound, the light is on but no output
- the motion smoothing on this thing is terrible, makes movies look like cheap soap operas, how do i kill it
- sound suddenly stopped coming from the tv speakers, but the picture is perfect
- the remote that came with the tv is super unresponsive, have to press buttons multiple times
- how do i clean the screen on this samsung without damaging it? the manual is useless
- netflix and disney+ apps keep freezing or crashing on my smart tv, other apps are fine
- why does my tu7000 make a faint buzzing or humming sound from the back, especially on bright scenes
- the tv just cycles through a boot loop, shows the samsung logo then restarts over and over
- my new samsung tu7000 keeps saying no signal on every hdmi port even though everything is plugged in
- there's a weird faint buzzing noise coming from the back of my vizio, only when it's on
- the tv keeps disconnecting from my wifi, have to reboot it to get it back
- the screen is black but i can hear sound, happens when i switch to my playstation
- the smartcast home screen is super slow and laggy on my v505, takes forever to load netflix
- my vizio remote stopped working with the tv, but the phone app still works
- how do i clean the screen on my v505-j09 without ruining it? it's a dust magnet
- the sound on my v-series cuts out randomly for a second, especially on streaming apps
- my vizio v505-j09 won't turn on, the power light just blinks and nothing happens
- when i switch to an hdmi input on my lg c3, there's no sound through my soundbar connected with earc. i have to reboot everything.
- the magic remote for my c3 feels super laggy and the pointer jumps around, is the remote bad?
- my lg c3 won't connect to wifi but every other device in my house can, it just keeps searching or says failed.
- how do i clean the screen on my lg c3 oled without ruining the coating? i see smudges.
- i hear a faint clicking or popping sound from the back of my lg oled tv sometimes, is the panel breaking?
- webos on my new lg c3 is super laggy and apps keep freezing, do i need to reset the whole thing?
- the screen on my oled55c3pua looks weirdly dim in hdr mode when i'm playing a game on my ps5, like everything is gray and washed out.
- my lg c3 tv just turned off by itself and now the red standby light is blinking 3 times, what does that mean?
- the sensor cook functions keep overcooking my popcorn or melting my butter.
- food heats unevenly in this microwave, some parts are boiling and others are cold.
- the clock on my breville microwave resets to 0:00 every time i unplug it, is the battery dead?
- how do i clean the inside roof of this microwave? it has that brown splatter and won't come off.
- my smooth wave makes a loud humming or grinding noise when it runs, not the normal fan sound.
- the control panel on my breville microwave is completely unresponsive, no lights, nothing.
- why does my breville smooth wave smell like burning plastic when i use it?
- my breville smooth wave microwave just beeps three times and won't start cooking, what's the deal?
- there's a loud humming or buzzing noise from my toshiba microwave even when it's not cooking
- the number pad on my toshiba microwave is super unresponsive, have to press really hard
- my toshiba em131 beeps three times and won't start when i press start, door is shut
- the clock on my toshiba microwave keeps resetting to 0:00 every time i unplug it
- i get a burning plastic smell from my toshiba em131 when i use it, not from food
- my toshiba microwave light stays on all the time even when the door is closed
- the turntable in my toshiba em131 spins super slow or gets stuck, it's not turning right
- my toshiba em131 microwave just stopped and shows F-11 on the screen, what is this?
- the display is showing 'F0' and it won't do anything, just beeps. what does f0 mean?
- the soap dispenser doesn't open all the way during the cycle, i keep finding whole detergent pods undissolved.
- water stays pooled at the bottom of the tub after a cycle ends, it never fully drains.
- my dishwasher runs but never seems to get the dishes dry, even on heated dry. everything's still wet.
- it sounds like there's rocks tumbling around during the wash cycle, really loud grinding noise.
- the control panel on my gallery dishwasher is completely dead, no lights or anything. checked the breaker and it's fine.
- why does my frigidaire dishwasher leave a gritty white film on everything after a cycle?
- my frigidaire gallery dishwasher just beeps three times and won't start, the start button does nothing. what's the deal?
- getting an 'ie' or 'ie1' error code on the display, what does that mean for this model?
- the soap dispenser won't open on my dw80r5061, i find full pods just sitting in the cup after a wash
- dishes are still wet and kinda warm after the normal cycle finishes, feels like it's not drying at all
- water sits in the bottom of my stormwash after a cycle, it won't drain all the way
- the control panel on my samsung dishwasher is totally dead, no lights, no response, nothing
- dw80r5061us makes a loud grinding noise during the wash cycle, sounds like it's coming from the bottom
- stormwash dishwasher leaves a white chalky film on all my glasses after every wash
- my samsung stormwash dw80r5061 just beeps 3 times and won't start any cycle, what's that about?
- my mooka air purifier is making a weird buzzing or humming noise, is this normal?
- what's the right operating temperature for an absolute ozone generator? mine's in a hot garage.
- can i use my air aroma aromax in the bathroom?
- can i put regular essential oils from the store in my air aroma aromax?
- puroair 240 wifi light is off and i can't control it from the app anymore. how do i reconnect it?
- trying to connect my puroair to the app but it just won't find the device. followed the instructions, what am i missing?
- can i use my winix air purifier in the bathroom?
- can i use my coway air purifier with essential oils or air freshener sprays?
- my voopnu air purifier seems weak, not cleaning the air well. what am i doing wrong?
- airflow from my levoit feels really weak even on the highest setting, did i do something wrong?
- my levoit air purifier randomly shuts off after running for a while, then i have to turn it back on. what gives?
- replaced filters on my aquasana aq-6300m but the red light is still on
- my aquasana under sink water filter is beeping and the light is red, what does that mean?
- words are way too small on my sceptre e24 at 1080p, how do i make text bigger without making everything blurry?
- sceptre 24 inch monitor looks blurry and unstable, text is hard to read, how do i fix this?
- printing a booklet for a project, brother work smart 1360 is printing all pages single-sided. how do i set up booklet printing?
- my brother work smart 1360 printer won't show up in my windows 11 printers list, how do i add it?
- how often do i need to change the filters on my aquatru reverse osmosis system?
- my express water ro system water tastes kinda bitter or metallic, did i install it wrong?
- my cuzn uc-200 water flow is super slow, barely a trickle. help?
- ispring ro water tastes just like my regular tap water, did i do something wrong during install?
- the water volume on my bluevua isn't accurate, i set it for 1 liter but it makes way less
- why is my bluevua ropot water filter so slow? takes forever to fill the carafe
- installed my ispring ro system and got zero water from the faucet, all valves are open, help?
- my ispring rcc7ak-bn water tastes exactly like my tap water, did i miss a step during install?
- my brita pitcher filter light is blinking red and won't stop, what do i do?
- my ego mower is leaving clumps of grass underneath, it's not mulching properly. how do i fix this?
- nutri bullet pro 900 just stopped in the middle of blending and won't start again, no lights or anything.
- my nutri bullet pro 900 is leaking from the bottom of the cup when i blend, what's wrong?
- the travel strap on my crock pot cook and carry is confusing, how do you attach it properly?
- crock pot cook and carry stoneware cracked after cooking, is this safe to use?
- my powerxl air fryer pro's fries are always soggy, not crispy. what am i doing wrong?
- can i use my roomba i3+ on multiple floors? like if i carry it upstairs will it find its base?
- roomba i3+ is stuck under my couch and can't get out, how do i stop this?
- food keeps burning on the bottom of my imusa pressure cooker even with enough liquid. what am i doing wrong?
- the little pressure regulator weight keeps hopping off the vent pipe and shooting steam everywhere. how do i keep it on?
- it takes forever for my imusa to get up to pressure, like 45 minutes just to start rocking. is that normal?
- the rubber ring on the lid smells terrible like old food and it's staining my rice. how do i clean or replace it?
- my aluminum imusa pot has these white, chalky spots all over the inside after i washed it. is it ruined?
- the pressure release valve on my imusa cooker is stuck up and won't go down, i can't open the lid after cooking.
- no steam or pressure is building up in my imusa cooker, just a tiny leak around the lid. cooked for 30 mins and nothing happened.
- my imusa pressure cooker lid won't lock shut, it just spins and won't seal. what am i doing wrong?
- the buttons on my blender base are stuck or really hard to press
- why does my blender smell like burning plastic or electrical when i use it
- black and decker blender blade seems loose and wobbly even when screwed onto the jar
- the lid for my black+decker blender is so hard to get on and off the jar
- my blender turns on but only works on the lowest speed, any higher setting and it just stops
- how do i get the smell out of my bl2010bg blender jar, it stinks like old smoothie
- black & decker blender leaking all over the counter from the bottom of the glass jar
- my black and decker blender just makes a humming noise but the blades don't spin when i turn it on
- it smells like burning plastic the first few times i use it, even after doing the empty burn-in cycle, is that safe?
- the timer dial feels loose and sometimes skips numbers or doesn't set the time i want, is it broken?
- i can't get the basket to separate from the pan inside, they're stuck together after cooking some cheese
- food at the bottom of the basket is burning but the top isn't cooked, even when i shake it halfway like they say
- the non stick coating on the basket is already peeling off after a few washes, is it safe to use and how do i stop it from getting worse?
- my air fryer makes a loud humming or buzzing noise that isn't the fan, it's coming from the back and it's really distracting
- the window on my 6qt square kmfurnila is completely fogged up and i can't see anything while it's running, is that normal?
- my kmfurnila air fryer just beeps three times and won’t start cooking, the display is on but nothing happens when i press start
- can i really put the basket and the little tray thing in the dishwasher? the manual says yes but i'm skeptical.
- the basket is so hard to pull out and push in, it feels like it's going to break, is mine defective?
- the presets like 'fries' or 'chicken' seem to overcook everything, how do i just use the manual time and temp?
- there's a burning plastic smell and a little smoke the first few times i use it, is this normal?
- my fries/chicken nuggets are coming out soggy on the bottom, not crispy at all, what am i doing wrong?
- the bottom of my gourmia air fryer basket has this weird white-ish film that won't scrub off, what is it?
- why does my air fryer keep beeping and flashing "FOOD" on the screen in the middle of cooking?
- my gourmia air fryer won't turn on at all, the screen is just dead no matter what outlet i plug it into
- the reusable filter that came with it lets so much sludge into my coffee, how do i fix this
- water is leaking from the bottom of the machine, underneath, not from the carafe
- the glass carafe doesn't sit right on the warmer, it feels wobbly and coffee doesn't stay hot
- there's a loud gurgling or rattling noise coming from inside when it's brewing
- my machine starts brewing but then just stops after a few seconds, like it gives up
- the anti-drip thing on my ovente isn't working, it leaks coffee all over the counter when i take the carafe out mid-brew
- coffee tastes burnt and bitter from my new ovente, even with fresh grounds
- my ovente coffee maker won't turn on at all, no light or anything, but it's plugged in
- water just drips super slowly out of the spray head, takes forever to brew 4 cups. already descaled it.
- the warming plate gets way too hot and burns the last bit of coffee in the carafe into a nasty tar. can i make it less hot?
- coffee leaks from the bottom of the machine where the basket attaches, not from the carafe. makes a mess on the counter.
- the glass carafe doesn't sit right on the warming plate anymore, it wobbles and doesn't trigger the brewing switch reliably.
- my coffee maker makes a loud gurgling or rumbling noise towards the end of the brew cycle, sounds like it's struggling.
- the pause n serve feature on my coffee maker doesn't work, it just drips coffee all over the hot plate when i pull the carafe out.
- coffee tastes weak and watery from my elite gourmet 4-cup, even with extra scoops. it just runs through too fast.
- my elite gourmet 4-cup coffee maker won't turn on at all, no light, nothing. checked the outlet.
- there's a dead pixel, a tiny black spot that won't go away. do i have to return the whole monitor?
- the 1ms mprt setting in the menu makes the screen super dark and flickery, is it broken?
- i can't get the vesa mount to line up, the holes on the monitor don't seem to match my arm.
- there's a faint but constant high-pitched buzzing or coil whine coming from the back of the monitor, especially on dark screens.
- the screen has a weird purple or green tint, colors look totally off compared to my laptop.
- how do i get the 160hz refresh rate to work? it's stuck at 60hz in windows settings on my gaming pc.
- my sansui monitor just shows 'no signal' and goes to sleep even though my pc is on, using the hdmi cable it came with.
- my playstation 5 works on hdmi 1 but not hdmi 2 on this monitor, it just says no signal
- can't get the vesa mount to work, the screws that came with my mount don't fit the holes on the back
- i hear a faint buzzing or high pitched noise from the back of the monitor, is that normal?
- the colors look really washed out and bland compared to my old monitor, especially the blacks
- the monitor keeps going to sleep every few minutes even though my computer is on and active
- how do i get 100hz to work on this? it's stuck at 60hz in windows even with the displayport cable
- the speakers on my sceptre 27 inch monitor sound tinny and awful, is there a setting i'm missing?
- my sceptre monitor just shows a black screen but the power light is on blue, i can hear sound from the speakers though
- the stand feels wobbly and the screen tilts forward too easily, is there a way to tighten it or do i need a new stand?
- can i clean the screen on this dell with alcohol wipes? the microfiber cloth isn't getting these smudges off.
- the screen randomly goes black for a second then comes back, mostly when gaming, how do i stop this?
- there's a faint but annoying high-pitched whine or buzz coming from the back of my monitor, is it defective?
- i'm trying to get 144hz on my dell se2426h but windows only shows 60hz as an option, what am i missing?
- my dell monitor has a single black pixel stuck on a bright color, can i fix it or do i need to return it?
- the screen on my dell se2426h looks kinda washed out and colors are off, how do i fix the picture?
- my new dell se2426h monitor says 'no hdmi signal' even though my pc is definitely on, what gives?
- how do you clean this thing? there's like a black line appearing on every label now
- it prints but the barcode is all pixelated and scanners at the post office can't read it, gonna get dinged
- printer turns on but the screen just shows some weird symbols or nothing at all, buttons do nothing
- my iphone says it's connected but the shipping app just says 'printer not found' or 'offline'
- can't get this thing to print from my windows laptop, it connects via bluetooth but nothing comes out
- it printed fine for a week and now it won't feed the label, just makes a grinding noise and the paper light is red
- the labels are printing super faint and smudgy, like the ink is running out but it's thermal so there is no ink?
- my jadens printer just keeps blinking a blue light and won't connect to my phone, what am i doing wrong?
- i just plugged it in and nothing happens, no light, no display, no sound. it’s completely dead.
- condensation is building up a lot inside, especially on the back wall, and my cans are getting wet.
- it’s running non-stop and never seems to shut off, is that going to burn out the compressor?
- the door on my feelfunn 24-can cooler doesn't seem to seal tightly at the top corner, i can feel cold air leaking out.
- how do i clean the inside of this fridge? the manual says not to use abrasive cleaners but there's a sticky spill on the shelf.
- my drinks are not getting cold at all, the compressor feels warm but the inside is room temperature after hours.
- the digital display on my feelfunn beverage fridge is just showing two horizontal lines or a weird code, not the temperature.
- my new feelfunn mini fridge just arrived but it’s making a loud gurgling or bubbling noise inside, is that normal?
- the ice cubes are all stuck together in one big clump in the basket, they don't separate.
- ice tastes weird or smells like plastic even after a few cleaning cycles, how do i get rid of it?
- it takes way longer than 8 minutes to make a batch of ice, more like 20-25 minutes. is mine defective?
- my dumos keeps flashing the 'add water' light even though the tank is completely full to the max line.
- how do you clean this thing? the manual says to clean but the reservoir doesn't come out easily and i don't want to break it.
- ice maker is super loud, like a grinding or rattling noise, mostly when it's dropping ice into the basket.
- dumos ice machine making tiny, thin slivers of ice instead of the full cubes, what's wrong?
- my new dumos ice maker just runs the fan constantly and never makes ice, the water's full and it's been hours.
- the ice tastes weird or like plastic, even after running the clean cycle
- it says it's full when the basket is only half full of ice, keeps stopping early
- the power light is on but the screen is totally blank, no buttons do anything
- water is leaking from the bottom of the machine, underneath the basket area
- my ice is coming out really soft and mushy, it just clumps together in the basket
- the self-clean light is blinking and now it won't start a normal ice cycle, how do i stop it?
- ice maker turns on but never makes ice, just runs and the basket is empty after hours
- my euhomy nugget ice maker just arrived and it’s making a super loud grinding noise when it starts, is it broken?
- first batch of ice tastes terrible, like plastic or chemicals, is it safe?
- water is leaking from the bottom of my silonn ice maker, puddles on the counter
- it keeps saying the basket is full when it's only half full of ice, how do i fix the sensor?
- my silonn is so loud, it's making a loud grinding or buzzing noise when it's running
- ice maker won't turn on at all, no lights, no sound, checked the outlet and it's fine
- how do i clean the silonn slim01? the manual says to descale but i don't see how to run a cleaning cycle
- silonn ice maker making tiny, thin ice or slush instead of solid cubes, what gives?
- my silonn slim01 ice maker just keeps beeping and won't make ice, the light is blinking too
- moved my midea fridge and now it's making a clicking sound and won't cool, did i break it?
- the door on my midea mini fridge won't stay closed unless i really slam it, is the hinge adjustable?
- i can't get the temperature right in my midea, drinks in the back are freezing but milk up front is warm.
- the freezer compartment in my midea mini fridge is frosting up like crazy, everything's getting icy, how do i stop it?
- how do you clean the inside of this fridge without ruining it? the manual is vague and i'm scared of the plastic.
- why is my midea 1.6 cu ft fridge making a loud gurgling or buzzing noise every few minutes?
- the little midea fridge just stopped working overnight, no light, no sound, is it dead?
- my new midea mini fridge is running constantly and the inside feels barely cool, what am i doing wrong?
- the joystick control on the back feels super loose and wobbly, is it supposed to be like that or is mine broken?
- the screen has these weird dark smudges or shadows in the corners that don't go away, especially on a gray background.
- i'm trying to use the headphone jack on the monitor but there's no sound coming out, audio works fine on the pc itself.
- the adaptive sync/freesync on my vx2768 causes horrible flickering in dark scenes in games, it's really distracting.
- how do i clean the screen on this viewsonic without damaging the coating? it's got a weird matte finish.
- the monitor makes a faint but annoying high-pitched buzzing or whining sound, seems to come from the back left.
- just got this viewsonic 2k monitor and the colors look really washed out and dull, especially compared to my old one.
- my viewsonic vx2768 screen is black but the power light is on, i can hear windows sounds, just no picture.
- the washer won't drain at all, just sits there with water in the tub at the end of the cycle.
- a musty smell is coming from the washer even after i run cleaning cycles.
- the control panel is totally dead, no lights, no response, but it's plugged in.
- i get an 'ie' error every time i try to run a cycle, water just trickles in.
- after a wash, my clothes are sopping wet like the spin didn't work at all.
- the 'turbo wash' cycle takes forever, like over an hour, i thought it was supposed to be fast.
- washer makes a horrible grinding noise during the spin cycle, sounds like metal on metal.
- my lg top loader keeps saying 'le' on the display and won't start the cycle, what does that even mean?
- it's not filling with enough water, even on the deep water wash setting, clothes are dry on top.
- the clean washer light is flashing and i can't get it to turn off, how do i reset it?
- it's vibrating and walking across the floor violently on high spin, really loud.
- the lid lock light just keeps blinking and it won't start or let me open it.
- it's leaving dark gray or black greasy streaks on my clothes, only on certain loads.
- i just got this and the power sharpener attachment doesn't seem to clip onto the bar right, it's wobbly.
- no oil is coming out onto the chain and bar, i've checked the reservoir and it's full.
- the chain keeps coming off the bar or feels super loose right after i tighten it on my cs1500.
- my chainsaw starts but then the motor sounds like it's bogging down and dying as soon as i try to cut anything.
- the automatic sharpener on my oregon saw makes a grinding noise but doesn't seem to do anything to the chain.
- how do i clean out all the gunk and sawdust from inside the housing of the chainsaw? it's packed in there.
- the chain on my cs1500 spins but it just won't cut into the wood, it just sits there and smokes.
- my oregon cs1500 won't start at all, no lights or anything when i plug it in, what's wrong?
- the blue bypass valve on the side is stuck, i can't turn it to bypass mode.
- water is leaking from the top of the filter housing where it screws into the black head.
- the smart monitor voice is talking but i can't understand it, sounds garbled and the light is solid red.
- the filtered water tastes weird, kinda plastic or chemical, even after running it for a week.
- my filter is making a loud gurgling or humming noise inside the cabinet every time i use the water.
- the blue light on my aquasana is blinking fast and the voice says "filter change" but i just changed them a month ago.
- installed my aq-5200 and now the water pressure at my kitchen faucet is terrible, just a weak trickle.
- my aquasana under sink filter is dripping water from the housing, not the connections, just a slow drip from the plastic itself.
- is it normal for my generac inverter to show 130 volts on a meter? seems high, worried it'll fry my electronics
- the wireless remote start for my gp3000i won't connect, the light on the generator just blinks red
- how do i clean the carb on my gp3000i without taking the whole thing apart? it sat with gas over winter
- my generac inverter generator shuts off after about 10 minutes running with nothing plugged in, no error lights
- getting a loud metallic rattling noise from the front of my gp3000i, sounds bad, only happens at certain rpms
- why does my generac gp3000i surge and bog down for a second when my fridge kicks on? it never used to do this
- generator runs fine but my gp3000i isn't putting out any power to the outlets, all my stuff is dead
- my generac gp3000i inverter generator won't start at all, just makes a clicking sound when i pull the cord
- i replaced the filter but the replacement indicator light came back on after just a week, did i get a bad filter?
- the touch controls on my levoit are super sensitive or not working, it changes speed when i just walk by.
- how do i clean the actual inside of the levoit vital 100s? the manual only talks about the filter.
- my purifier turns on by itself in the middle of the night, the lights wake me up.
- the air quality light on my levoit is always purple or red even in a clean room, is the sensor broken?
- i can't get my vital 100s to connect to the veSync app, it just keeps searching forever.
- why is my levoit 100s making a loud rattling or buzzing noise all of a sudden?
- my levoit vital 100s just shows a solid red light and the fan won't spin, what does that mean?
- it smells weird, like burning plastic or ozone, when i first turned it on or after cleaning.
- the night light won't turn off even when i press the button or have it set to off in the app.
- i can't get the stupid rear cover off to change the filter, it feels stuck.
- why does my auto mode keep ramping up to max speed for no reason when the air feels fine?
- the display screen is completely blank or unresponsive but the fan is still running.
- my 400s won't connect to the veesync app no matter what i try, it just keeps searching forever.
- my core 400s keeps showing the red light for the filter and beeping even though i just put in a new filter, what gives?
- the wheels on my hrn216 feel wobbly and don't track straight anymore, making it hard to steer
- my honda mower starts but then sputters and dies after about 30 seconds, won't stay running
- i can't get the self-propel speed control lever on the handle to stay in the fast position, it just slips back to slow
- my honda mower leaves strips of uncut grass even with a sharp blade, it's not bagging or mulching well
- the engine on my hrn216vka dies when i release the self-propel drive bar, it only runs if i'm holding it forward
- my honda mower runs but sounds really rough and vibrates a lot more than it used to, especially at full throttle
- just got my new honda hrn216 and it's super hard to pull the starter cord, feels like it's locked up
- my honda hrn216vka mower starts fine but then the self-propel just stops working after a few minutes, what gives?
- i'm getting a 'temperature sensor disconnected' error for my remote sensor, how do i fix this?
- ecobee keeps saying 'heating' but it's blowing cold air, the furnace isn't igniting.
- how do i clean the ecobee screen without damaging it? it's covered in fingerprints and dust.
- my ecobee is making a faint but constant clicking sound from inside the unit, is this normal?
- the touchscreen on my ecobee is super laggy and unresponsive, sometimes it takes multiple taps to register.
- ecobee keeps disconnecting from wifi every few days, i have to keep re-adding it, getting annoying.
- my ecobee says it's cooling but no cold air is coming out, the fan is just running, help?
- my ecobee smartthermostat just went black and won't turn on, no lights or anything, what do i do?
- after not using it for a few months, my v20 drill won't turn on even with a battery i know is good, totally dead.
- craftsman v20 drill makes a high-pitched whining or grinding noise in speed setting 2, is the gearbox shot?
- my drill works fine but the led worklight doesn't come on anymore, can i replace just the light?
- the chuck on my cmcd700c1 wobbles slightly when i run the drill, is the chuck broken or can i tighten it?
- why does my craftsman drill slow down and sound strained when i put any pressure on it, even with a fresh battery?
- v20 drill battery won't click into the drill solidly, it just falls out if i tilt it, how do i fix the latch?
- craftsman cmcd700c1 drill gets super hot in the handle after like 5 minutes of use, is that normal?
- my craftsman v20 drill just clicks but the chuck doesn't spin at all, battery is charged, what's wrong?
- just got an xdt16z, the battery doesn't seem to click in all the way, feels loose and wobbly, is this normal?
- the mode selector ring on my xdt16z is stuck and i can't turn it to change between hammer and drill settings.
- how do you clean out the chuck on an xdt16z, mine is full of sawdust and the bit doesn't lock in tight anymore.
- my makita impact driver feels weak, it struggles to drive screws that my older makita handled fine, battery is charged.
- the led worklight on my makita impact stays on all the time even with the battery out, it just slowly fades, what's going on?
- why does my xdt16z impact driver keep shutting off after like 5 seconds of use, then i have to release and pull the trigger again?
- makita xdt16z making a loud grinding or rattling noise when i use it, sounds awful, is it broken?
- my makita xdt16z impact driver just stopped working mid-job, no lights, no sound, nothing when i pull the trigger.
- my drill sometimes just won't start, i pull the trigger and nothing happens, but if i whack it on the table it starts working
- the chuck on my drill is seized shut, can't open it to change the bit no matter how hard i twist
- dewalt drill smells like burning and gets really hot near the motor just holding the trigger for a few seconds
- the forward/reverse switch on my dcd771 is super stiff and sometimes gets stuck in the middle
- my drill works on speed 2 but makes a horrible grinding noise and barely moves on speed 1
- the battery meter on my dewalt 20v drill only shows one bar even after a full charge, is the drill broken
- dewalt dcd771 chuck wobbles and bits won't stay tight, it's not the bit itself
- my dewalt 20v drill just clicks when i pull the trigger, battery is charged and it feels like it's trying but nothing spins
- the eero app says my network is offline but the lights are solid white and everything seems to work.
- just got the eero pro 6e and my upload speeds are way slower than download, is that normal?
- my device keeps connecting to the far away eero instead of the one right next to me, speeds are awful.
- eero app says my node has a 'poor connection' to the gateway but they're in the same room.
- i can't get my eero pro 6e to connect via ethernet backhaul, it just defaults to wireless.
- why is my eero pro 6e so hot to the touch, is it going to catch fire?
- my eero 6e network says it's online but my devices keep dropping wifi constantly.
- my new eero pro 6e keeps flashing a solid white light, won't connect in the app, what do i do?
- my printer says 'incorrect cartridge' for a brand new epson ink i just put in, it's definitely the right model.
- the power light on my epson workforce just blinks nonstop and nothing happens when i press any buttons.
- can't get my computer to see the epson printer over the network for scanning, even though printing works fine.
- my wf-2960 is making a loud grinding noise when it prints, sounds like it's coming from the right side.
- the scanner glass on my epson all-in-one looks clean but every scan has faint smudges in the same spots.
- my workforce 2960 won't connect to wifi anymore after a router change. it was working fine before.
- why is my epson wf-2960 printing everything with faint streaks or missing lines? just cleaned the nozzles and it didn't help.
- my wf-2960 says 'paper jam' but i've looked everywhere and there's no paper stuck, what's going on?
- my eco tank's black ink level shows full but it's printing really faded or not at all, other colors are fine.
- trying to scan to pdf on my computer and it's super slow, like it takes 5 minutes for one page.
- printer won't turn on at all, no lights, no sound, nothing. it was working yesterday.
- scanner on my eco tank 4850 is making a loud clunking sound and won't move, says scanner error.
- all my prints have faint horizontal lines or gaps in the text, even after running head cleaning a bunch of times.
- et-4850 is making a loud grinding noise when it tries to print, like it's chewing on the paper.
- printer screen says 'Ink pads are at the end of their service life. Contact Epson Support.' can i reset this myself or do i have to send it in?
- my new et-4850 won't print over wifi at all, setup keeps failing. it's plugged in and on the same network as my laptop.
- how do i clean the inside of the main unit, above the basket? it has greasy splatter and i'm scared to damage it
- the plastic housing on the top of my ninja air fryer gets extremely hot to the touch, is this normal or dangerous
- food is coming out soggy on the bottom in my ninja max xl, not crispy at all, even with shaking
- the non-stick coating on my basket is chipping off, is this safe and can i still use it
- i just got this and the display is showing 'Err' and it won't do anything, how do i reset it
- my ninja af161 makes a loud, high-pitched whining or buzzing noise when it's running, it didn't do this before
- the air fryer basket for my ninja max xl is completely stuck, i can't twist it to get it out of the drawer
- my ninja air fryer max xl just beeps three times and won't start cooking, the display is on but nothing happens when i press start
- how do i get my g30 edge to actually clean along edges and corners? it just leaves a gap.
- i pressed the clean button on my eufy g30 but it just turns off after like 10 seconds, won't stay on.
- my g30 edge robot vacuum keeps getting lost and can't find its way back to the charging base.
- the suction on my g30 edge seems really weak all of a sudden, it's not picking up anything.
- eufy g30 edge is making a loud grinding noise from one side, sounds awful when it's running.
- my roboVac g30 edge is supposed to have wifi but it just won't connect to the eufyHome app, stuck on searching.
- why does my eufy robot vacuum g30 edge just beep three times and won't start cleaning?
- my eufy g30 edge keeps getting stuck on rug edges and can't dock, it just spins in circles.
- roomba 694 won't go back to its dock, it just bumps into it and then gives up and stops.
- the dirt detect light on my 694 keeps flashing red during a clean even on clean floors, what does that mean?
- my roomba 694 is making a horrible grinding noise when it runs, sounds like it's chewing rocks.
- the side brush on my 694 isn't spinning at all during a clean, is it broken?
- how do i reconnect my roomba 694 to wifi? the app says it's offline and the wifi button on the robot is solid red.
- roomba 694 battery dies super fast, like 20 minutes into a clean, and goes back to dock but the dock light is green.
- why is my roomba 694 just wandering around in circles and not really cleaning the whole room?
- my roomba 694 just beeps once and won't start cleaning, the clean button is lit up but it just sits there.
- the clear bin on my v11 is stuck and i can’t empty it, the red release button won’t budge.
- the max boost mode only runs for like 30 seconds then shuts off on my v11.
- how do i get the battery out of my dyson v11 to check it?
- the suction on my v11 feels really weak even after i empty the bin.
- my vacuum makes a high-pitched whistling or screeching noise from the cleaner head.
- dyson v11 won’t charge at all, the light on the charger just flashes.
- why does my v11 torque drive pulse on and off when i’m using it on carpet?
- my dyson v11 just shows a red light and won’t turn on, battery’s fully charged i think.
- my coffee tastes burnt or bitter lately even with fresh beans, how do i clean the inside of the ninja dualbrew?
- the 'keep warm' function on the hot plate doesn't seem to work, my coffee is cold in 20 minutes.
- can i use my own k-cups in the single serve side? it seems like the needle didn't puncture mine right and made a huge mess.
- the clock on my ninja dualbrew resets to 12:00 every time i unplug it, even for a second, is the battery dead?
- i keep getting an error that says 'clean drip stop' on the screen and it won't let me brew anything.
- why does my dualbrew pro make a loud gurgling noise after brewing and the carafe keeps overflowing?
- the hot water and coffee both come out super weak no matter what setting i use on my cfp301, is mine broken?
- my ninja dualbrew pro just got it and the screen says 'set up wifi' but the app can't find it, what am i doing wrong?
- i can't get the water reservoir off my k-mini to fill it, it feels stuck.
- my k-mini takes forever to heat up, like 5 minutes, before the blue light is steady. is that normal?
- the handle on my k-mini feels loose and won't 'click' shut firmly anymore.
- water is leaking from the bottom of my keurig k-mini onto the counter every time i brew.
- just got a k-mini, plugged it in, and the blue light won't come on. it's completely dead.
- why is my k-mini brewing a really weak, watery cup of coffee all of a sudden?
- my keurig k-mini is making a loud gurgling sound but no water comes out at all.
- my k-mini coffee maker is blinking orange and won't brew anything, what's wrong?
- dyson tp04 screen is showing an error code, how do i reset it?
- i used vinegar in my bissell crosswave and now it's acting weird, is it broken?
- can i use my own floor cleaner in the bissell crosswave 1785a?
- i unboxed my levoit but it won't power on at all, no lights, no fan, nothing.
- the night light on my core 300 won't turn off even when i press the button, it's too bright.
- my levoit purifier turns on but the fan speed seems weak even on high, air flow is low.
- can i wash the pre-filter on my core 300? the manual is confusing and i don't want to ruin it.
- i just replaced the filter but the check filter light won't turn off on my levoit.
- the touch controls on my core 300 are super sensitive and keep turning on by themselves, how do i lock them?
- why is my levoit air purifier making a loud rattling or buzzing noise all of a sudden?
- my levoit core 300 just beeps three times and flashes the red light, what does that mean?
- the rubber brush on my j7+ keeps coming out of its holder mid-clean, it's just dragging behind it.
- it's missing whole sections of my floor, just skips a room entirely on the map.
- roomba j7+ won't connect to my wifi during setup, just keeps failing.
- clean base on my j7+ isn't emptying the robot, it just makes a whirring noise then stops.
- why does my roomba j7+ just spin in circles and not move forward sometimes?
- j7+ keeps getting stuck under my kitchen cabinets, says 'please move roomba to a new location'.
- roomba j7+ is making a horrible grinding noise only when it's on carpet, sounds awful.
- my roomba j7+ just says 'please clean roomba's bin' even though the bin is empty, what gives?
- my chefman air fryer's shake reminder keeps beeping, how do i turn that sound off?
- chefman dual window air fryer food not getting crispy, what am i doing wrong?
- the air fryer drawer on my ninja crispi pro is really hard to close, feels like I'm forcing it
- trying to air fry frozen fries in my cuisinart, they came out soggy not crispy. what am i doing wrong?
- can i use my ninja foodi 8 quart to dehydrate fruit? how do i do that?
- can i put the basket from my chefman mini air fryer in the dishwasher?
- why does my hamilton beach frontfill coffee maker brew so slow and overflow the filter basket?
- how do you run a cleaning cycle on a keurig k-supreme? not descaling, just cleaning.
- keurig k-supreme brewing only half a cup then stopping, what's wrong?
- how often do I need to change the filters on my APEC ROES-50? and which ones first?
- how do i reset the filter change light on my brita pitcher after i put in a new one?
- can i pressure wash my stihl ms 250 to get all the sap and gunk off?
- how do i clean the air filter on my stihl ms 250? it's absolutely caked in sawdust
- my apec ro water still tastes like tap water, not pure. what gives?
- my husqvarna 460 rancher is smoking a lot more than usual and seems down on power, what's up with that?
- does the brita filter take fluoride out of the water?
- my ego chainsaw makes a horrible grinding noise and vibrates bad, only when the chain is moving. did i mess up the sprocket?
- the text on my lg 4k monitor looks blurry or fuzzy, not sharp like 4k should be. did i set it up wrong?
- my lg 27ul500-w screen looks washed out and weird. colors are off, especially when i watch hdr content. how do i fix the picture?
- ego power+ cs1804 chain isn't getting any oil, bar is smoking. how do i check the oiler?
- is there a way to make my dell u2722d monitor dim when the screensaver comes on to save power?
- my dell u2722d monitor's dell display manager icon disappeared from the taskbar, how do i get it back?
- is it safe to blend hot soup in my kitchenaid k400? don't want an explosion.
- my vitamix e310 circuit breaker in my kitchen keeps tripping when i use it. is the blender faulty?
- can i use my old vitamix container with the new e310 explorian blender?
- my LG monitor screen is flickering badly when i play games, how do i stop it?
- how do i get my LG 27UL500-W to display in 4K? it's stuck at 1080p.
- my honeywell hpa300 just seems weak, not moving much air even on turbo
- honeywell hpa300 light is on but the fan isn't spinning, what gives?
- the dell power button sync (dpbs) on my u2722de isn't turning my dell pc on and off
- dell u2722de usb-c port not charging my laptop, what gives?
- my kitchenaid k400 won't start when i press the button, power light is on though.
- how do i sharpen the chain on my stihl ms 250? feels like it's just rubbing now instead of cutting.
- my vitamix e310 stopped after like a minute of blending nut butter, did i break it?
- the chain on my husqvarna 455 rancher won't stop spinning when the engine is idling. is this dangerous?
- will the honeywell hpa300 help with asthma triggers like dust mites?
- honeywell hpa300 keeps shutting off after a few minutes, anyone know what's up?
- my honda generator's co-minder fault light is blinking once every two seconds. it still runs. what does that mean?
- my honda generator is making a weird sputtering noise and the power flickers when i plug in my fridge. is the eco throttle thing broken?
- the dell display manager menu is stuck on my screen and follows my mouse, how do i turn this off?
- my dell u2722d monitor won't switch inputs automatically when i open different apps, is the auto mode broken?
- wen generator won't stay running, it starts then shuts off after a few seconds.
- the eco mode on my wen inverter generator keeps turning the engine off and on, is it supposed to do that?
- what's the black turbo nozzle for on my greenworks gpw1804? can i use it on my wood deck?
- what's the actual filter change schedule for the ROES-50? i don't want to guess.
- kitchenaid k400 blender lid is stuck and won't come off, help?
- my kitchenaid k400 just stopped blending in the middle of making a smoothie, what gives?
- my honda generator shuts off after running for a while, feels really hot. can i run it in my garage if i open the door?
- honda eu2200i overload indicator is red and everything shut off, engine still running though. how do i fix this?
- my brita longlast filter light is green but my water is tasting off, should i change it?
- honeywell hpa300 filter light is on but i just changed it, what gives?
- sun joe pressure washer starts but then shuts off after a few seconds, keeps doing this, help?
- i'm getting no water out of my sun joe pressure washer, motor runs fine.
- my wen inverter generator keeps shutting off when i plug in my space heater. what's going on?
- the automatic ventilation feature on my ecobee premium just turned on by itself, is that normal?
- can i use my stihl ms 250 to cut up an old pressure-treated fence post?
- the automatic ventilation on my ecobee premium just turned on for 20 minutes. why? can i stop it from doing that?
- honda eu2200i overload light is on and everything shut off, how do i reset it?
- can i use the honeywell t9 thermostat with electric baseboard heaters?
- trying to install my honeywell t9 smart thermostat and i don't see a C wire in the wall. the manual says it's required. can i still install it?
- the chain brake on my husqvarna 455 rancher feels sticky and doesn't always snap on when i need it. how do i service it?
- honeywell t9 keeps switching to a room i'm not in, how do i make it follow me?
- just installed a honeywell t9 and the heat won't turn on, house is cold
- just got a greenworks gpw1804 and it won't reach high pressure, water just dribbles out. help?
- how do i get my dell display manager window layouts to save and come back when i reconnect my laptop to the monitor?
- my dell ultrasharp u2722d monitor keeps losing the dell display manager icon, and the software won't detect the monitor. how do i fix this?
- the self-propel on my honda hrn216 feels like it's going way too fast, how do i slow it down?
- honda hrn216 self propelled mower is leaving behind cut grass when i'm trying to bag. bag isn't full. what gives?
- why does my vitamix e310 keep tripping the outlet in my kitchen?
- can i turn off smart home & away but keep the other eco+ features on my ecobee?
- how do i set up time of use on my ecobee premium to save money on electricity?
- can i use my greenworks cordless mower to mulch leaves in the fall?
- where is the best place to put my honeywell hpa300 in my living room?
- honeywell t9 thermostat display is on but it won't change the temperature when i press the arrows
- ego power+ mower handle feels loose and wobbly, how do i tighten it
- my greenworks cordless mower just stopped in the middle of mowing and won't restart, battery light is still on.
- greenworks 40v battery won't click into my lawn mower, feels loose.
- what's the little lever on the gas cap of my honda generator for? i can't remember if it should be on or off.
- what's the right way to set the depth on a makita 18v lxt saw? i keep getting crappy cuts.
- the battery release button on my ego mower feels stuck and i can't get the battery out. help?
- ego mower self-propel function stopped working, wheels just freewheel. how do i fix the drive?
- can i use my makita cordless saw to cut aluminum or plastic? the manual only says wood.
- my makita cordless saw is kicking back like crazy, how do i stop it?
- do i need to register my ryobi p215k1 for the warranty? how does that work?
- where's the serial number on my ryobi p215 for warranty registration?
- how do i know if my ryobi p215 battery is charged?
- ryobi p215k1 drill feels weak, won't drive screws all the way. battery is full.
- how do i know if my milwaukee m18 battery is actually charged? the indicator is confusing.
- the eco+ icon is always on my ecobee screen and it's preheating my house at weird times, how do i control this?
- my milwaukee m18 battery died after like a year, is that covered?
- ecobee premium keeps using my expensive aux heat instead of the heat pump, how do i stop that?
- what's the best way to drill a clean hole in metal with my makita xfd131? it always seems to wander.
- can i use my makita xfd131 to drill into concrete or brick?
- i set my honeywell t9 to cool but the house is still heating up, it's not responding, help?
- my dewalt cordless drill trigger feels sticky and sometimes doesn't turn off right away
- my dewalt drill keeps stripping screws even on the lowest torque setting, am i doing it wrong?
- the battery on my greenworks mower dies super fast, like 10 minutes. is the battery bad or is it me?
- greenworks 40v mower is leaving streaks of uncut grass. blade seems fine. what gives?
- my dyson ball animal 2 just shut off by itself in the middle of vacuuming and won't restart
- dyson ball animal 2 brush bar keeps getting tangled with hair immediately, is it broken?
- how do you clean the brush bar on a dyson ball animal 2? it's wrapped with hair.
- how do i clean the filters on my shark navigator nv356e? it's losing suction.
- can i use the mulch plug and side discharge chute at the same time on my ego lm2135sp?
- the hose on my shark navigator lift-away pro keeps detaching from the pod when i'm using the wand, it's super annoying.
- can i use my shark navigator lift away vacuum to clean up fireplace ashes or fine dust?
- how do i replace the blade on my ego lm2135sp mower?
- my shark navigator lift-away pro nv356e keeps losing suction after like 5 minutes, what's the deal?
- dyson v8 absolute keeps shutting off after a few seconds, what gives?
- dyson v8 suction is really weak all of a sudden, even on boost mode. help?
- can i wash the fluffy roller head from my dyson v8? it's got hair wrapped all in it.
- the chuck on my ryobi p215k1 drill won't tighten all the way, bit keeps slipping. how do i fix this?
- dyson v15 detect screen is showing a filter alert with a red icon
- my dyson v15 detect battery dies in like 5 minutes, is it broken?
- how do i prioritize my gaming pc on my linksys velop wifi?
- how do i prioritize my work laptop on my linksys velop wifi 6?
- makita xfd131 battery gets really hot and dies fast, is it gonna explode?
- how to disable the dhcp server on my netgear orbi so i can use my own?
- how do i block specific websites on my orbi wifi 6 mesh network for my kids?
- asus rt-ax86u's 5ghz wifi network isn't showing up on my phone, but the 2.4ghz one is. what's wrong?
- my shark navigator lift away smells bad when i run it, like burning dust
- i just cleaned the filter on my dyson v8 and now it won't run. the light on the mode button is flashing orange. what does that mean?
- how do i hard reset my asus rt-ax86u router? forgot the admin password.
- just got an asus rt-ax86u, where do i find the default wifi password? it's not on the sticker.
- canon mg3620 power light is on but it won't print anything from my computer
- linksys velop keeps disconnecting my smart tv, how do i check the connection strength?
- can i use glossy photo paper in my hp laserjet m234dwe?
- hp laserjet pro m234dwe printing with weird streaks and smears all over the page
- my pixma mg3620 isn't feeding paper right, it jams or pulls multiple sheets. do i need to clean something?
- can i completely turn off the wifi on my epson wf-2860? i'm only using usb now.
- how do i get my epson wf-2860 printer to print from my phone without using my home wifi?
- how do i share my deco wifi password with a guest without telling them?
- how do i kick a device off my deco x20 wifi for good?
- my epson printer's fax won't pick up before my answering machine, it keeps cutting off calls
- can i use my hp m234dwe printer without the hp smart app? i just want to scan to my computer
- hp m234dwe printer says it's connected but won't print from my phone
- can i use my canon mg3620 wirelessly without installing the cloud printing center stuff?
- brother hl-l2350dw driver install fails every time, says not enough disk space. how much does it actually need?
- my epson wf-2860 screen keeps going back to the home screen while i'm trying to use it, it's so annoying, how do i make it stop?
- how do i scan a document to my computer with the epson ecotank et-2800?
- my epson ecotank et-2800 won't connect to wifi, i keep getting an error. how do i fix this?
- can i print double-sided automatically with the canon pixma tr8620a?
- my canon pixma tr8620a printer is saying it's offline on my wifi network, how do I get it back online?
- brother hl-l2350dw toner light is flashing, how many pages do i have left?
- hp smart won't install from microsoft store for my 9015e, says i can't install apps
- can i print photos directly from my phone to the canon pixma tr8620a without a computer?
- canon pixma tr8620a printing super slow, like way slower than advertised, is this normal?
- can i print from my iphone to the epson ecotank et-2800?
- how do i change the default paper size for everything on my epson wf-2860?
- hp officejet pro 9015e setup keeps failing on my work laptop with a vpn
- can i cook fish in one basket and fries in the other ninja dualzone without the fish smell getting on the fries?
- my hp officejet pro 9015e was working but now my computer can't print to it wirelessly. the wireless light is on. do i need to restart setup?
- can i print photos directly from my phone to the canon pixma tr8620a? there's no app mentioned anywhere.
- i'm trying to set up my hp officejet pro 9015 with my iphone and hp smart can't find it, bluetooth is on, what am i missing?
- philips air fryer won't turn on at all, no lights, nothing. help?
- why are my homemade fries coming out soggy in my philips essential air fryer?
- cosori pro le air fryer food not crispy, even with the recommended time
- the food in my cosori air fryer is coming out soggy, not crispy at all. what am i doing wrong?
- my hp officejet pro 9015e won't connect to wifi during setup, the hp smart app can't find it. what gives?
- how do i clean the main part of my ninja dualzone air fryer? it's greasy inside.
- my ninja foodi keeps switching to keep warm mode after pressure cooking, but i don't want it to. how do i turn that off?
- trying to steam veggies in my ninja foodi and it's showing 'WATR' on the screen, then stops. what's that mean?
- can i cook frozen fries and fresh chicken tenders at the same time in my ninja foodi dualzone?
- how do i clean my ninja foodi dualzone air fryer? can the baskets go in the dishwasher?
- how do you clean the washable pads for the braava m6? can they go in the dryer?
- how do you clean the tank on a braava jet m6? it's starting to smell
- my cosori air fryer food is coming out soggy, not crispy. what am i doing wrong?
- braava m6 keeps getting stuck on rugs or thresholds
- irobot m6 mop tank smells bad, how do i clean it?
- just got a eufy 11s, what do i absolutely need to do before i let this thing loose in my house?
- how do i manually drive my eufy robovac 11s to a specific spot? the remote isn't doing anything.
- cosori air fryer food cooking unevenly, some parts burnt some raw
- my cosori pro le air fryer fries are coming out soggy, not crispy. help?
- my irobot m6 mop won't go back to its charging station at the end of a job, it just sits in the middle of the floor.
- my braava m6 isn't spraying any water when it mops, it's just dragging a dry pad.
- my irobot roomba i3+ evo is making a loud grinding noise from the bottom, what should i check?
- the remote for my robovac 11s isn't working at all, changed batteries and everything
- braava jet m6 keeps saying low battery and stopping even though it's on the charger, why?
- my roomba i3+ evo is making a loud grinding noise when it runs, sounds like it's coming from the brushes.
- delonghi magnifica s cappuccino maker not frothing milk properly, just big bubbles
- my delonghi machine's light is flashing for the water tank but it's full. what gives?
- delonghi magnifica s only one coffee spout is working, the other is dry
- my delonghi ecam22110sb cappuccino maker is giving me big, foamy bubbles instead of microfoam. how do i fix this?
- my delonghi magnifica s espresso machine is on but no coffee comes out, just a drop or two
- my ninja dualbrew pro coffee is coming out super weak, even when i use the same amount of grounds as my old machine. how do i fix it?
- my delonghi machine is leaking water from the bottom onto the counter, what do i check?
- the orange clean light is on my ninja coffee maker but i just cleaned it. do i have to run it again?
- my ninja coffee maker keeps showing "Add Wtr" even though the reservoir is full. help?
- clean cycle light is orange on my ninja dualbrew pro but i just cleaned it
- ninja dualbrew pro coffee maker leaking from under the brew basket, what do i do?
- mr coffee 12 cup programmable won't start brewing when i set the timer the night before, just sits there
- can i use bottled or filtered water in my breville barista express?
- my mr coffee programmable 12-cup maker is beeping non-stop in the middle of the night, how do i make it stop?
- can i brew less than 12 cups in my mr coffee bvmc zh1b without it tasting bad?
- mr coffee programmable bvmc-zh1b keeps shutting off by itself after like 10 minutes, not even two hours
- my breville barista express is flashing the clean/descale light, what does that mean?
- can i use my mr coffee 12-cup programmable to just make hot water for tea?
- how do i clean the inside water tank on my keurig classic? it looks gross.
- why does my keurig classic say 'place cup' when there's already a cup there?
- my keurig brewer shuts off by itself after a minute, is it broken?
- ninja af101 air fryer won't turn on, power button light is dim but nothing happens
- my roomba 694 is leaving a trail of dust behind it, not picking anything up.
- keurig k-mini making a weird gurgling sound and not brewing full cups. do i need to descale?
- how do i clean the permanent filter on my elite gourmet coffee maker? can it go in the dishwasher
- how do i clean my mr coffee bvmc-zh1b? it's starting to taste weird
- what's the deal with the small batch mode on my hamilton beach 45237? when do i use it?
- elite gourmet coffee maker keeps leaking water from the bottom when i try to use it
- can i use a regular paper filter with my bella dots coffee maker instead of the reusable one? what size?
- how do i clean the inside of my mr coffee sc05? it's starting to taste weird.
- kefeya portable tv screen won't rotate to portrait mode, how do i fix this?
- how long can I safely leave food on the keep warm setting in my pressure cooker?
- how do i clean the screen on my amazon basics monitor? i don't want to damage it.
- sansui eye care monitor keeps turning off by itself randomly, how do i stop this?
- my dell monitor says 'no hdmi cable' and is going into standby, but the cable is plugged in. what gives?
- can i use third-party ink in my epson ecotank et-2400 to save money?
- how do i clean the pressure regulator on my tramontina cooker? it's making a weird hissing noise.
- can i put my t-fal clipso stainless steel pressure cooker in the dishwasher?
- my barton pressure cooker is shooting liquid out of the vent pipe under the pressure regulator. is this dangerous?
- denali tanker overpressure plug popped out while i was using it, what do i do?
- how do i clean the rubber ring on my prestige popular aluminum cooker? it smells like old food.
- hawkins pressure cooker making a hissing sound and steam leaking from the sides during cooking, how do i fix this?
- is the presto 01362 dishwasher safe or do i have to hand wash everything?
- my calphalon pressure cooker won't pressurize, the indicator won't pop up. checked the gasket.
- my presto 01264 aluminum cooker is looking dull. how do i clean and keep it shiny?
- lost the manual for my t-fal 22 quart polished canner, where do i find the pressure settings for my altitude?
- my hawkins classic pressure cooker is leaking steam from around the lid, not cooking right.
- my cosori 6qt pressure cooker display is just blank after I plug it in, nothing happens
- my supvan t50m pro says 'label tape not recognized' in the app, but there's tape in it
- what's the max paper size and weight i can put through the automatic document feeder on my hp officejet pro 8125
- niimbot b1 is making a weird clicking noise and nothing prints, how do i fix this?
- i changed label sizes on my knwon y486 and now it won't print right. what do i do?
- can my epson ecotank et-2800 print on thick cardstock or photo paper?
- canon pixma ts4320 not feeding paper properly, keeps jamming
- how do i clean my electactic beverage refrigerator? i don't want to ruin it.
- water won't drain from my auertech portable washer, what gives?
- how do i clean my crzoe ice maker before first use?
- jeevony dryer vent dv180 installation, do i need to cut my existing duct?
- antarctic star mini fridge making a humming noise, is 38 db normal?
- my ninja tb401 is leaking from the bottom when i blend smoothies
- can i put my nutri bullet baby parts in the dishwasher? the motor base feels gross.
- hamilton beach blender jar is stuck and won't come off the base, any tricks?
- is it safe to blend frozen fruit directly in the cup that came with the ovente hand blender?
- my ninja ultracrush is making a weird noise and the display says Er, what's wrong?
- my magic bullet power base got liquid in it from a leak, is it safe?
- can i use my nutribullet to blend hot soup or coffee? the cup feels warm and i'm worried it'll explode.
- does this air fryer work if I put frozen mozzarella sticks straight in without thawing them first
- can i wash the whole blender under the faucet or put it in the dishwasher?
- my monitor keeps randomly shutting off after like 20 minutes. it feels hot.
- can i put the powerpod in the dishwasher? it's got grease on it
- how do i clean the inside of this thing without wrecking it?
- how do you actually clean this thing? can i wash the inside with water?
- is there a special setting if i'm only making like 2 cups? it tastes weird
- is it safe to wash the sharp blade and disc in the dishwasher? i don't want to ruin them.
- the "CLEAN" message keeps flashing on my coffee maker, how do i make it stop?
- my ice cubes keep sticking together in a big clump, how do i stop that?
- my coffee pot started making really bitter coffee out of nowhere. i'm using the same grounds as always.
- coffee maker is leaking water all over my counter, what's the deal?