RK
Ren Kato
The exact number, not the ballpark.
Ren cites the actual setting, temperature, or error code rather than a rough description, because "turn it up a bit" has never fixed anything. Best read when your appliance is throwing a specific number or code at you.
Answers from Ren Kato
- i washed the filter for my hoover maxlife but now it smells musty when i vacuum, especially on carpet.
- the headlight on my pet swivel won't turn on anymore, but the vacuum itself works fine.
- the hose on my maxlife pet swivel detached from the vacuum base and now it won't lock back in right, feels loose.
- my vacuum just turns off by itself after a few minutes of use, then sometimes comes back on.
- how do i get the brush roll to stop spinning on my hoover uh74220 for hard floors? it just scatters debris.
- the suction on my maxlife pro pet is super weak now, it barely picks up anything off the carpet.
- my hoover pet swivel is making a loud rattling or grinding noise when i turn it on, sounds bad.
- my hoover maxlife pet vacuum won't turn on at all, i pressed the power button and nothing happens, no lights no sound.
- the coffee maker turns on by itself in the middle of the night, but i didn't set a program
- the brew pause feature doesn't work on my black and decker, i pull the carafe and it just stops completely
- the 'clean' light on my cm1160b is on and won't go off, how do i reset it?
- my coffee maker is leaking water all over the counter from the bottom when it brews
- how do you set the clock on a cm1160b? i can't figure it out, the manual is gone
- the coffee tastes burnt from my black+decker 12 cup, i've tried different coffee and it's still bad
- why does my cm1160b coffee maker beep 5 times and not start brewing? it just sits there
- my black and decker cm1160b coffee maker just flashes 'add water' but the reservoir is full, it won't brew
- it won't dock properly, just bumps into the dock and then gives up saying 'charge error'.</p>
- my shark robot is stuck on 'updating firmware' for over an hour, the light is just spinning blue.
- it keeps missing big spots in the middle of the room, just goes around them, the map looks fine.
- the suction seems really weak all of a sudden, it's not picking up anything on my carpets.
- it won't connect to the app, just stays on 'connecting to your robot' forever, i've tried resetting.
- shark ai ultra is making a loud grinding noise from one side, sounds horrible when it turns.
- robot keeps saying 'cleaning incomplete, returning to charge' after like 5 minutes, battery shows full.
- my shark ai ultra just flashes a red exclamation point and beeps, won't start cleaning, what does that mean?
- the wheels on my dyna glo cart lock up and won't roll, i have to drag the whole grill which is scratching my patio.
- the thermometer on the lid of my dyna-glo is way off, it reads 100 degrees less than my digital probe at the grate level.
- rain water pools in the center of the lid and then drips all over the controls and into the ash pan when i open it.
- i can't get the warming rack in or out of my dyna-glo dual zone without it getting completely stuck on the brackets.
- the paint on the outside of my dyna glo grill lid is blistering and flaking off after a few uses, is this normal?
- the lid on my dyna-glo dual zone is really hard to open and close, it feels like it's grinding or catching.
- my dyna glo dual zone grill won't get hot enough, barely hits 250 even with a full chimney of charcoal. what's wrong?
- just put my new dyna glo dual zone together and the charcoal grate won't sit level, it keeps tipping and dumping charcoal into the ash pan.
- the dishwasher door won't stay closed, it just swings open on its own.
- my dishwasher is leaving a white, powdery film on all my glasses and plastic items.
- the sani rinse light won't come on even though i have the cycle selected.
- the control panel is completely dead, no lights, no response. the power is on at the outlet.
- there's a loud grinding or humming noise only during the drain portion of the cycle.
- dishes are coming out wet and sometimes still dirty, especially on the top rack.
- just installed my whirlpool wdp540hamz and it's beeping three times and won't start any cycle.
- my whirlpool front control dishwasher is stuck on '2 hours remaining' for the entire cycle and never finishes.
- the monitor won't wake up from sleep, i have to unplug it and plug it back in every time
- there's a weird faint vertical line or band of discoloration on the left side of my screen, how do i get rid of it
- i can't get 144hz to work, it's stuck at 60hz in windows display settings for my vx2758-2kp-mhd
- the screen keeps going black for a second then coming back, happens randomly while gaming or just browsing
- how do i turn off the annoying blue power led light on the front of my viewsonic monitor
- my monitor makes a faint high-pitched buzzing or coil whine sound, is this normal for the vx2758
- the colors on my viewsonic vx2758 look washed out and weird compared to my old monitor, how do i fix this
- my viewsonic vx2758 monitor just shows 'no signal' then goes black even though my pc is on and hdmi is plugged in
- it keeps cycling on and off every few minutes, never actually makes a full batch of ice
- the power light is on but the display is completely blank, no buttons work
- clean light is flashing and it won't start making ice, how do i reset it?
- the ice cubes are coming out really thin and hollow, like shells, not solid cubes
- it says it's making ice but nothing comes out, not even water, just hums
- ice maker makes a loud grinding noise when it's trying to harvest ice, sounds terrible
- my avalon bay ice maker just blinks 'add water' nonstop even though the reservoir is full, what gives?
- can i use the chime pro as just a wifi extender for my other ring cameras, not the doorbell?
- the chime pro isn't making any sound when my doorbell rings, but the light flashes.
- my chime pro keeps disconnecting from wifi every few days, i have to keep rebooting it.
- how do i factory reset the ring chime pro? the button on the back doesn't seem to do anything.
- the light on my chime pro is solid red and it's not working at all.
- i set up the chime pro but my video doorbell still says 'poor connection' in the app.
- the chime pro is making a constant high-pitched whining noise, is it broken?
- my ring chime pro just has a solid white light and my doorbell won't connect to it, what's wrong?
- i need to replace the filter but i can't get the old one out, the frame seems stuck.
- my f220 is wobbling on my hardwood floor, it doesn't sit flat.
- the fan speed button doesn't change the speed anymore, it's stuck on one setting.
- how do i clean the outside of this thing? the white plastic is getting dusty and looks dirty.
- the blue light on my boneco f220 is blinking slowly, what does that mean?
- it says it's on but almost no air is coming out, even on the highest setting.
- the air shower fan is making a loud rattling or buzzing noise, it's brand new.
- my boneco f220 won't turn on at all, no lights, nothing. just got it and plugged it in.
- the power button light is on but the screen stays completely black, won't show the menu or anything.
- the text looks kinda blurry or fuzzy on the edges, even after i set it to the recommended 1920x1080 resolution.
- how do i clean the curved screen on this thing? i'm scared to use regular glass cleaner and leave streaks.
- my monitor screen randomly goes black for a second or two and then comes back, happens every few minutes during games.
- i'm trying to use the built-in speakers on my sceptre monitor but no sound comes out, even though windows shows them as the output device.
- there's a constant high-pitched whining or buzzing sound coming from the back of my monitor, is it defective?
- the colors on my sceptre c275w look really washed out and weird, especially compared to my laptop screen. how do i fix this?
- my sceptre curved monitor just shows 'no signal' and goes to sleep even though my pc is on and the hdmi is plugged in.
- the washer is really unbalanced and bangs around, even with small loads.
- i can't get the smart features to connect to my wifi, the app just times out.
- the washer keeps stopping mid-cycle with an f21 error, clothes are soaking wet.
- the washer won't drain, just sits there with water in the drum at the end of a cycle.
- my ge smart washer smells musty, i run the clean cycle but it comes right back.
- getting a u6 error code on my ge front load washer, what does that mean?
- my ge smart washer won't power on at all, just a blank screen, tried different outlets.
- i get a crazy amount of ash blowing onto my food from the bottom vent, even on low and slow cooks.
- after assembling my classic iii, the dome feels way too heavy and slams shut, is the spring installed wrong?
- the sloroller keeps my temps way too low and uneven, should i just take it out and use the deflectors?
- i see smoke leaking from the hinge area of the dome, did i not seal it right during assembly?
- my divide & conquer system is so tight i can't get the top tier out without a fight, is this normal?
- how do i get the ash drawer out on the classic iii? it's completely stuck after my first long cook.
- the kontrol tower top vent on my classic iii is stuck and won't turn, i'm afraid to force it.
- my kamado joe classic iii is barely getting above 300 degrees even with both vents wide open, what gives?
- the cycle time keeps adding hours, it said 2 hours left and now it says 3. why is it doing this on auto cycle?
- the control panel on my bosch 800 is completely dead, no lights, no display, nothing. checked the breaker and it's on.
- my bosch dishwasher door won't stay closed, it just pops open an inch right after i latch it.
- dishes are still wet and sometimes have a white film at the end of the cycle, especially on the top rack.
- i keep getting an e15 error code on my bosch 800. what does that mean and how do i clear it?
- the sanitize light never comes on at the end of a cycle on my shp78cm5n, even on the sanitize setting. is it broken?
- why is my bosch dishwasher making a high-pitched humming or whining noise during the cycle? it's not the normal sound.
- my bosch 800 series dishwasher just shows three dashes "---" on the display and won't start, what's that about?
- the auto sleep function is too aggressive, my monitor turns off while i'm watching a long video
- there's a thin vertical line of dead pixels on my hp m27fw screen, can i fix it?
- the power button light is solid white but the screen stays completely black, no backlight at all
- my monitor randomly goes black for a second or two and then comes back, happens every 20 minutes or so
- the colors look washed out and terrible on my new hp m27fw, especially compared to my laptop screen
- how do i clean the screen on my hp m27fw without damaging the anti-glare coating?
- the monitor makes a faint high-pitched buzzing or whining noise, especially on bright white screens, is this normal?
- my hp m27fw monitor just shows 'no signal' even though my pc is on and everything is plugged in
- it takes forever to make the first batch of ice, like over 30 minutes, is that normal?
- the ice tastes weird, kinda plastic-y or like vinegar even after cleaning
- it's leaking water from the bottom onto my counter, not from the drain plug
- my ice maker keeps flashing the 'add water' light but the tank is definitely full
- i just got this della and it won't turn on at all, no lights, nothing
- the ice cubes from my della are really thin and hollow, like shells, they melt instantly
- della portable ice maker makes a loud grinding noise when it's trying to harvest ice
- my della ice maker just beeps three times and won't make ice, what's that code mean?
- i have two tapo l530e bulbs in one fixture, but one won't respond when i try to group them together.
- tapo bulb won't turn on with the physical wall switch anymore, only works in the app, did i break it?
- my tapo bulb makes a faint buzzing or humming noise when it's dimmed, is that safe?
- set a schedule for my tapo bulb but it turns on at the wrong time or not at all, what gives?
- the colors on my tapo bulb look wrong, the blue is kinda purple and green is weak, is it broken?
- can't get my tapo bulb to dim all the way, it stops at like 20% brightness and won't go lower.
- my tapo bulb randomly goes offline in the app even though the light is still on physically, why?
- my new tapo l530e bulb just flashes rapidly when i try to connect it in the app and never shows up, what do i do?
- the led display on my hyf290b is dim or has segments missing
- my quiet set tower fan wobbles a lot on a hard floor, seems unbalanced
- the timer on my honeywell fan doesn’t shut it off, it just keeps running
- fan only works on the high setting, lower settings 1-7 do nothing
- the remote for my hyf290b stopped working, but the buttons on the fan work fine
- how do i clean the honeywell tower fan without breaking it, it’s got dust caked inside
- honeywell quiet set fan making a loud clicking or grinding noise on oscillate
- my honeywell towers fan won’t turn on at all, no lights or anything, even though it’s plugged in
- the mop attachment is barely leaving any water on the floor, it's basically dry.
- it's missing whole sections of the room and the map looks all jagged and wrong.
- battery drains super fast, like from 100% to 20% in 15 minutes, and it goes back to charge.
- the main brush doesn't spin at all during cleaning, just drags on the floor.
- my q7 max plus won't connect to wifi during setup, the app just times out.
- the auto-empty dock is making a loud grinding noise but doesn't suck anything out of the robot.
- robot seems to get stuck on my dark area rug and thinks it's a cliff, how do i fix this?
- my roborock q7 max plus just keeps saying 'error 1' over and over, what is that?
- detergent isn't dispensing from the tray, it just sits there and cakes up.
- it takes forever to finish a cycle, like over 2 hours for a normal wash. why?
- getting an F-35 error right after i start a wash. what's wrong?
- clothes are soaking wet at the end of the cycle, washer didn't spin them out.
- washer won't turn on at all, no lights, nothing. checked the outlet and it's fine.
- why does my washer smell so bad even after i run clean cycles? it's an ELFW7337AW.
- electrolux front load making a loud grinding noise during spin cycle, sounds like metal on metal.
- my electrolux washer is showing F-01 and won't drain. what does that even mean?
- just assembled my new cgg-7400 and the side shelves feel really wobbly, did i put them on wrong?
- the lid on my grill doesn't seem to seal right, a lot of smoke leaks out the sides. is there an adjustment?
- i get huge flare-ups in my grill even on low, it just coats everything in soot. how do i stop this?
- the igniter button on my cuisinart 4-burner clicks but it's weak and only works sometimes, do i need a new one?
- one of the burner knobs on my grill is super stiff and hard to turn, feels like it's grinding. can i fix it?
- how do you clean the grease tray on this thing? it's totally welded on with burnt gunk and won't slide out.
- the left side of my cgg-7400 gets way hotter than the right side, it's impossible to cook evenly. is it broken?
- my cuisinart 7400 grill won't light at all, just hear clicking but no flame on any burner, what gives?
- it's leaking water from the bottom front corner onto my floor
- the control panel buttons are beeping but not responding when i try to select a cycle
- water is sitting in the bottom of the tub after a cycle finishes, not draining out
- the dishes are still wet and spotted at the end of the heated dry cycle
- getting an f9 e1 error code flashing on the display after it runs for a few minutes
- it's leaving a white chalky film on all my glasses after a normal cycle
- dishwasher is making a loud grinding noise during the wash cycle, sounds like it's chewing rocks
- my maytag mdb8959skz dishwasher won't start at all, just dead when i press buttons
- the display pilot software won't detect my monitor, so i can't use the calibration or kvm controls.
- the screen randomly goes black for a second or two while i'm working, then comes back, it's driving me crazy.
- the hotkey puck for my pd2706u isn't responding or changing settings when i press the buttons.
- the auto pivot feature isn't working, my screen won't rotate when i turn the monitor.
- my monitor makes a faint but high-pitched buzzing or whining noise, is it defective?
- the built-in kvm on my benq pd2706u is not switching my keyboard and mouse when i change inputs, it's just switching the video.
- the colors look weird and washed out on my new pd2706u compared to my old monitor, how do i fix it?
- my benq pd2706u monitor is connected but says no signal from my macbook pro, what's wrong?
- i can't get any 4k content to play on my tcl 4k tv, everything looks like regular hd and the info says 1080p.
- the tv keeps switching to 'game mode' by itself when i'm just watching netflix, and the picture looks weird.
- there's a bright white spot about the size of a quarter in the bottom corner of my 43s446 screen, it's always there.
- the wifi on my tcl s-class keeps dropping every few minutes, have to restart the tv to get it back.
- i get no sound from the built-in speakers on my tcl roku tv, but the audio works fine through headphones plugged into the remote.
- my remote just stopped working with the tv, won't turn it on or change channels, but the red light on the remote blinks.
- the screen on my tcl 43s446 is super dim and dark even with the backlight setting maxed out, movies are way too shadowy.
- my new tcl s446 tv is stuck on the 'smart tv initializing' screen with the swirling circle and won't go past it.
- there's a several second delay from when someone rings the bell to when i get the notification.
- doorbell button feels mushy and doesn't always make the chime sound when pressed.
- my blink doorbell won't record any motion clips even though the motion is turned on.
- the infrared night vision on my doorbell looks all cloudy and white, can't see anything.
- i get a 'failed to connect' error every time i try to use live view on my blink doorbell.
- doorbell just keeps chiming inside by itself, nobody’s at the door and the app shows no motion.
- blink doorbell battery drains in like a week even with low activity, is this normal?
- my blink doorbell camera just shows a solid blue light and won’t connect to the app at all, what do i do?
- the fan on my dehumidifier works but the compressor won't kick on, just blows room temp air.
- i set the humidity to 50% but my waykar just keeps running nonstop, never reaches it.
- the display on my waykar is showing 'E1' error code and it shut off, what does that mean?
- how do i clean the air filter on my waykar 80 pint? i can't figure out how to get to it.
- my dehumidifier is making a loud grinding or rattling noise, sounds like it's coming from the bottom.
- the water bucket is full but my waykar isn't automatically draining through the hose, it just overflowed.
- waykar 80 pint commercial unit is running but not pulling any water out of the air, bucket is dry.
- my waykar 80 pint dehumidifier is just beeping nonstop and won't turn on, what is happening?
- i get an error code 'E05' when trying to brew a single serve pod. what does that mean?
- the 'clean' light is flashing but i just cleaned it. how do i reset the clean indicator on my ninja?
- water is leaking from the bottom of my machine, underneath, every time i brew. where is it coming from?
- the built-in grinder on my ninja is making a high-pitched squealing sound and sometimes stops. coffee is coming out chunky.
- my dualbrew pro won't turn on at all, no lights, nothing. i've checked the outlet. is it dead?
- the coffee tastes weak and watery no matter what setting i use on my cfp301, even on rich setting. what's wrong?
- why is my ninja making a super loud grinding noise only when i try to make a single cup? it's fine for a carafe.
- my dualbrew pro just says 'please descale' on the screen and won't let me do anything else, how do i make it stop?
- my ice tastes weird, kinda plastic or chemical, even after cleaning. how do i get rid of the taste?
- water is leaking from the bottom of my clear ice maker, underneath it, not from the tank.
- it keeps showing 'FULL' but the basket is only half full of ice, how do i fix the sensor?
- the power button does nothing, my sentern ice maker is completely dead, no lights.
- how do you clean the water tank on this thing? it's got pink slime and i can't get to it.
- it says it makes ice in 6 minutes but mine takes over 20, and the cubes are tiny and thin.
- why is my sentern ice maker so loud, like a grinding or rattling sound when it's running?
- my sentern portable ice maker just flashes 'E1' on the screen and beeps, won't make any ice, what does that mean?
- my station's status light is solid yellow and i can't find what that means anywhere.
- how do i migrate my old smartthings v3 hub to this new station without starting over?
- after a power outage, my smartthings station came back with a slow pulsing blue light and none of my automations work.
- the wireless charging pad on top of my station gets really hot and my phone stops charging.
- can't get my smartthings station to pair with a specific zigbee light bulb, it just times out every time.
- the built-in matter controller on my station doesn't find any of my new thread devices, what am i missing?
- smartthings station keeps randomly going offline in the app, shows status as 'disconnected' every few days.
- my new smartthings station is stuck on a solid red light and won't show up in the app at all during setup.
- my ac is blowing cold air but the room never gets down to the temperature i set, it stops like 5 degrees above.
- the remote control for my jhs ac doesn't work, i've tried new batteries.
- it’s leaking water onto my floor from the bottom, not from the hose. what’s wrong?
- the unit won't turn on at all, no lights, nothing. i've checked the outlet and it's fine.
- how do you clean the filter on this thing? i can't find where it is on my jhs a018.
- my portable ac keeps shutting off after a few minutes and the display shows E1, what does that mean?
- just installed my a018-10kr and it’s making a loud gurgling or water sloshing noise, is that normal?
- my jhs portable ac is running but not cooling the room at all, the air coming out is just kind of warm.
- the washer vibrates and walks across the floor violently on every spin, it's shaking the whole room.
- it's showing 'dE' or 'dE2' and the door won't unlock, my clothes are trapped inside.
- suddenly my washer won't power on at all, no lights, completely dead.
- the smart things app won't connect to my bespoke washer, it just times out every time.
- why does my laundry come out of this samsung smelling musty even after a clean cycle?
- the washer is making a loud grinding noise only during the spin cycle, sounds terrible.
- getting a 5E error on my samsung wf53bb8700at and it just drains water, how do i fix it?
- my bespoke washer is stuck on the 'add detergent' screen and won't start the cycle, what's the deal?
- the grease drain keeps clogging, i’ll do a cleanout but halfway through a long cook it starts dripping from the bottom of the cabinet.
- temperature swings are crazy, it’ll be at 225 then spike to 350 for no reason, is my controller bad?
- after cleaning, my grill won’t prime, it just dumps a huge pile of pellets into the firepot when i try to start it.
- the app won’t find my grill during bluetooth setup, the light just keeps blinking blue.
- the slide and grill feature isn’t sliding easily, it feels gritty and sticks halfway.
- my sgx makes a loud repetitive clicking noise from the auger motor area, it’s not a smooth turn anymore.
- keep getting an erl error code on my smoke pro controller, what does that mean and how do i clear it?
- my new camp chef sgx won’t get past 150 degrees, it just sits there and the auger sounds like it’s turning but no pellets are feeding.
- the normal cycle seems to run forever, like over 3 hours, is that right?
- water is not draining at the end of the cycle, there's standing water in the bottom.
- the control panel buttons don't respond or light up, the whole thing is dead. checked the outlet and breaker.
- getting an le error code on my lg ldts5552s, what does that mean and how do i fix it?
- it won't start when i press the start button, just beeps once. all the lights are on.
- dishes are still wet and spotted after a normal cycle, nothing seems to be drying.
- my lg dishwasher is making a loud grinding noise during the wash cycle, sounds like it's coming from the bottom.
- lg dishwasher ldts5552s just shows pf on the display, what is that? it won't run any cycle.
- it's vibrating really badly in my hands, way more than it used to, what's wrong
- i'm not getting any power at all, trigger does nothing, battery works on my drill
- the guard keeps rotating on me mid-use, how do i lock it in place
- how do you take apart the shaft to pack it away? i can't figure out the collar
- why does my m18 fuel trimmer keep shutting off after like 10 seconds of use? battery is full.
- the trimmer makes a really loud grinding noise from the gearbox area, is it broken
- i just got this 2725 and the line advance bump feed doesn't seem to work at all, what am i doing wrong
- my m18 fuel trimmer just spins really slow when i pull the trigger, i put a fresh battery in it and everything
- i keep getting 'error E15' when trying to use a custom recipe from the app, what does that mean?
- the touch buttons on my hd9280 don't respond unless i press really hard, sometimes not at all.
- my fries are always soggy in the xl airfryer, not crispy like the pictures, what am i doing wrong?
- philips xl air fryer just turns off by itself mid-cook, no error code, just goes black.
- i can't get the black stuff off the inside of the basket, tried soap and soaking, it's baked on.
- the app won't find my new philips connected air fryer during setup, i've tried everything.
- why does my hd9280 make a loud rattling noise when it runs? sounds like something loose inside.
- my philips airfryer xl screen just says 'error E06' and won't heat, how do i fix it?
- after making nut butter, the motor smells like burning and it seems weaker, like it struggles to get up to speed now.
- the pre-programmed smoothie cycle seems to stop too early, it doesn't blend everything and leaves big chunks.
- i can't get the blender to connect to the blendtec app on my phone for the guided cycles, it just times out.
- the blender randomly stops during a cycle and shows 'err 1' on the screen. what does that mean?
- how do i clean the gunk out from under the rubber seal on the blade of the wildside jar? it's gross and smells.
- it's making a really loud grinding noise only on the higher speed settings, sounds awful compared to my old blender.
- the touchscreen on my designer 650 is completely unresponsive, buttons don't light up or do anything when i tap them.
- my blendtec designer 650 just shows a flashing 'lid' message on the screen and won't start, even though the lid is on.
- how do i clean the fabric cover on the front of this lg soundbar without ruining it
- hdmi arc worked for a week and now my tv says no signal
- there's a weird popping or crackling noise from the speakers when i change volume or source
- remote won't work with my lg s40q unless i'm like 2 feet away
- soundbar sounds hollow and tinny, like all the bass is gone even with subwoofer on
- the soundbar turns off by itself after like 20 minutes even when audio is playing
- i can't get the subwoofer to connect to my lg s40q soundbar, the light just stays red
- my lg soundbar just flashes 'fp' on the display and no sound comes out, what does that even mean
- the light on my liftmaster 8587w turns on but turns off after like 30 seconds, can i make it stay on longer?
- after a power outage, my 8587w just beeps three times and won't operate.
- there's a high-pitched whining noise from the motor when it runs.
- myLiftMaster remote works but the myQ app says 'offline' and won't connect.
- the travel limits on my 8587w keep resetting themselves overnight.
- my garage door opens but only goes down about a foot and then reverses back up.
- heard a loud pop from my 8587w and now it hums but won't open the door.
- my liftmaster 8587w wall control panel just flashes and the opener won't respond at all.
- after folding and unfolding, my scooter sometimes won’t power on until i jiggle the stem.
- i can’t get the inokim app to connect to my scooter via bluetooth, it just keeps searching.
- the front fender on my light 2 super rattles nonstop over small bumps, driving me nuts.
- the battery indicator drops from 3 bars to 1 bar almost instantly after a full charge, is my battery dead?
- how do i clean the deck and underside without messing up the electronics? i rode through some mud.
- my scooter turns on but the motor doesn’t engage when i press the throttle, just a clicking sound from the deck.
- the folding mechanism on my light 2 super is super stiff and squeaks like crazy, how do i fix it?
- my inokim light 2 super just beeps three times when i try to turn it on and nothing happens, what’s wrong?
- the headlights on my shark stratos won't turn on anymore
- the dust cup on my shark stratos is overflowing super fast and suction drops
- my shark stratos is leaving a lot of debris behind on my carpet, even on the max setting
- the hose on my shark stratos keeps detaching from the vacuum body when i pull it
- i just got my shark stratos and the brushroll won't spin at all, but suction works
- my shark stratos is making a high pitched whining or screeching noise from the bottom
- why is my shark stratos losing suction right after i start vacuuming? the brushroll is spinning
- my shark stratos won't turn on, tried different outlets and the button does nothing
- the monitor keeps going to sleep even when i'm watching a full screen video or have a document open.
- there's a single dead pixel stuck on black in the middle of my new p2722h screen. can i fix it or do i need to return it?
- the usb ports on the side of my monitor don't work for charging my phone or connecting a mouse.
- the colors on my dell p2722h look washed out and weird compared to my old monitor, especially the blacks are gray.
- how do i clean the screen on my p2722h? the microfiber cloth just smears it more and i'm scared of damaging the coating.
- my dell p2722h screen has a constant faint buzzing or humming sound, especially on bright white screens.
- just got a p2722h and the screen says 'no hdmi signal from your device' but my laptop is definitely plugged in.
- my dell p2722h monitor won't turn on at all, no power light, nothing. tried different outlet.
- the fan won't turn on when it's supposed to, either auto or when i manually set it to on.
- my schedule keeps disappearing or resetting on its own. i set it and a day later it's gone.
- how do i fix a temperature reading that's way off? it says 72 but my room feels like 65.
- the app says my thermostat is offline but the screen on the wall looks fine and is working.
- why is my thermostat losing its wifi connection every few days? i have to keep reconnecting it.
- i can't get my honeywell rth6580wf to connect to my wifi. it keeps failing.
- my honeywell wifi thermostat screen is just blank, no backlight, nothing. it was working yesterday.
- the number 2 button on my keypad is really hard to press and sometimes doesn't register
- the sensor cook buttons (like popcorn or reheat) keep burning my food, how do i make them work right?
- my microwave makes a loud humming or buzzing noise the entire time it's running, not just sometimes
- the clock on my ge microwave keeps resetting to 12:00 every few days by itself
- how do i clean the inside of this microwave? the top has a brown splatter stain that won't come off
- i pressed start on my ge microwave and it just beeps three times and does nothing, no heat
- the turntable in my ge jes2051snss stopped spinning but the microwave still heats stuff up
- my ge microwave just shows 'PF' on the display and won't start, what does that mean?
- i cleaned the pre-filter but now the front grill won't snap back on all the way, there's a gap
- my germguardian's display is showing all weird symbols or is completely blank but the fan is running
- is it normal for my ac5350b to smell kinda weird, like plastic or ozone, when it first turns on?
- the power button on my germguardian doesn't respond half the time, have to mash it to turn on
- my air purifier fan speed keeps changing on its own, i didn't touch the buttons
- the filter reset light on my germguardian won't go off even after i put in brand new filters
- just got my ac5350b and the uv-c light won't turn on, is it broken already?
- my germguardian ac5350b air purifier is making a loud buzzing or rattling noise, it's driving me nuts
- after self-cleaning, my oven won't turn on and the display is completely blank.
- the oven door on my mer7700lz is really hard to close, it feels like it's catching or sticking.
- one of my large burners clicks forever and won't light, the others work fine.
- i get an F2 error code when trying to use the self-clean cycle, what does that mean?
- the clock on my maytag range keeps resetting to 12:00 every time i turn it off at the breaker.
- my range makes a loud humming or buzzing noise from the back when the oven is on, is that normal?
- the oven on my mer7700lz won't heat up at all, but the lights and controls all seem to work fine.
- my maytag electric range just shows 'F10' and all the buttons are locked, how do i unlock it?
- the folding mechanism on my v8 feels super loose and the stem wobbles a lot when i ride, how do i tighten it?
- how do you clean a turboant v8 electric scooter? i'm scared of getting water in the battery or motor.
- turboant v8 won't go over 10 mph even in sport mode with full batteries, feels like it's stuck in a low speed setting.
- the front headlight on my v8 flickers and sometimes goes out completely while riding, is there a loose wire?
- my scooter makes a loud clicking or grinding noise from the back wheel when i accelerate, it's getting worse.
- just got my turboant v8 and the app won't connect to the scooter no matter what i try, bluetooth says pairing failed.
- my v8's screen is showing e-04 and it won't move, what does that code mean and how do i fix it?
- my turboant v8 scooter was working fine yesterday but today it won't power on at all, no display, nothing. help?
- my tineco won't go into self clean mode when i dock it, it just charges. the self clean button is unresponsive.
- the led screen on my breeze is flickering and showing weird symbols, but it still runs.
- after cleaning, my ifloor 3 breeze is leaving big wet streaks on my hardwood floors instead of drying them.
- the clean water tank says it's full but the screen shows 'add water' and it won't spray.
- i get a high-pitched whining noise from my tineco when it's sucking up water, and the suction feels weak.
- the self cleaning cycle on my breeze isn't cleaning the roller, it just runs dirty water over it and leaves it grimy.
- my ifloor 3 breeze worked once and now it won't turn on at all, no lights or sounds, it's fully charged.
- why does my tineco ifloor 3 breeze keep pausing and saying 'please clean main roller' when the brush roll looks totally clean?
- the power cord on my eureka won't rewind all the way, it just hangs out a few feet
- my vacuum tipsover backwards super easy when i pull it, it's like the head is stuck down
- how do i get the stupid dirt canister off this thing? the release button isn't working
- the hose keeps popping off the back of my vacuum when i try to use the attachments
- suction feels really weak on my eureka even with an empty canister, barely picks anything up
- the brush roll on my powerspeed isn't spinning at all, just the suction works
- there's a high pitched whining noise coming from my upright and it smells like burning, did i break it?
- my eureka powerspeed just stopped turning on mid-vacuum, no lights or anything, what gives?
- the monitor won't wake up from sleep when my pc does, i have to power cycle it every time
- i'm getting weird flickering or screen tears even with g-sync compatible enabled on my mag274qrf
- hdr looks washed out and grey on this monitor when i turn it on in windows 11
- the joystick button on the back of my msi optix feels unresponsive or opens the wrong osd menu
- how do i clean the screen on this msi monitor? the matte coating seems weird and i'm scared to damage it
- my monitor makes a faint but audible high-pitched buzzing or whining noise, seems to come from the back
- the colors on my msi mag274qrf look way too oversaturated and cartoonish, especially reds
- my msi optix mag274qrf-qd monitor screen is just black but the power light is on, no signal message
- my ac won't turn on and the thermostat screen is completely blank, no buttons work.
- the display is really dim and hard to read, even after adjusting the contrast in settings.
- the app says 'device offline' but the thermostat itself is on and working fine on the wall.
- i'm getting an 'e1' error code on the display and the heat won't kick on.
- why does my thermostat keep losing connection to wifi? i have to keep re-adding it in the app.
- my new vine thermostat just says 'no power to equipment' on the screen and won't do anything, what do i do?
- it sparks and arcs inside when i turn it on, even with no metal in there
- the door on my microwave won't close all the way, it feels loose and the latch doesn't click
- the clock on my em720cb7 keeps losing time, i set it and it's wrong the next day
- how do i clean the inside of this microwave without damaging it, the stains are baked on
- the turntable in my black+decker microwave just stopped spinning
- the keypad on my microwave is totally unresponsive, i have to press buttons like 10 times
- my em720cb7 is making a loud humming or buzzing noise when it runs, but the food still heats
- my black and decker microwave display just shows three zeros and won't respond to any buttons
- the air quality light stays red even after running on turbo for an hour in a small room.
- the replacement hepa filter i bought doesn't fit snugly, it wobbles inside the unit.
- my purifier turns off by itself after a few hours on timer mode, but i didn't set a timer.
- how do i clean the outside of this thing? the white plastic has grey smudges that won't come off.
- the auto mode light is on but the fan doesn't seem to speed up even when i spray air freshener nearby.
- i just got my ma-40 and the touch controls don't respond at all, it's just a black screen.
- why is my air purifier making a loud rattling or buzzing noise on the highest fan speed?
- my medify ma-40 just shows a red 'filter' light after a few months, isn't it supposed to last longer?
- the deck and handlebars got really dirty, can i just wipe it down with a wet towel or what?
- the charger light stays green even when i first plug it into the dead scooter, it's not charging.
- the folding mechanism is super stiff and i'm scared i'm gonna break it trying to lock it.
- my scooter suddenly brakes by itself for a second or feels like it's surging, not smooth.
- the range on my e500 is way less than advertised, like 5 miles on a full charge in mode 2.
- how do i pair my unagi with the app? it never shows up in my phone's bluetooth list.
- the scooter makes a loud clicking or grinding noise from the front wheel when i accelerate, feels rough.
- my unagi e500 just beeps twice and won't turn on, the power button lights up red for a second then nothing.
- it's not emptying the dustbin into the clean station, just docks and beeps then says check dustbin.
- the lidar cover on top keeps spinning but the robot isn't moving, then it errors out.
- the robot keeps getting stuck under my couch, it goes in but then just spins its wheels.
- the clean station makes a really loud high-pitched screeching noise when it empties the robot.
- it won't connect to the smartthings app, gets stuck on 'connecting to your robot' forever.
- why is my bespoke jet leaving wet streaks instead of mopping? it just drags a dirty line.
- the robot keeps saying 'please empty the dustbin' but i just did, it's not full at all.
- my bespoke jet bot combo is showing 'error 26' and just sits there beeping, what is that?
- my projector randomly shuts off after 20 minutes or so, the power light turns red, then it might turn back on
- the four corner focus is way off, i get the center sharp but the edges are always blurry no matter how i adjust
- keeps saying 'no signal' on hdmi 1 even though my fire stick is plugged in and working, hdmi 2 works fine
- the image on my px701-4k has a bunch of tiny colored specks or dots that don't move, mostly red and green
- projector turns on but the screen stays completely dark, no menu or anything, i can hear the fan running
- the lamp warning light is blinking red on my viewsonic projector but the bulb still works, how do i reset it?
- just got my px701-4k and the 4k signal from my ps5 keeps cutting out or says no signal, works fine on my tv
- my px701-4k projector is making a loud grinding or whining noise from the fan area, it's way louder than normal
- the side brush doesn't spin at all anymore, just hangs there during cleaning
- it keeps missing big patches of floor, just goes around them like they're not there
- shark app says my detect pro is offline even though the wifi router is right there
- my robot's brushroll keeps stopping and it says 'clean brushroll' even though it's totally clear
- the auto-empty base makes a super loud grinding sound for a second when it runs, then stops
- shark detect pro is stuck in one room and won't go back to its base, just wanders the perimeter
- robot keeps saying 'clean cliff sensors' but i already wiped them, it won't start cleaning
- my shark detect pro won't empty its bin into the base, it just makes a loud noise and gives an error 7
- can i clean the matte screen on this thing? the microfiber cloth just smears it and makes it look worse.
- the screen has a weird flicker or tearing in the middle when i play games, even with freesync turned on.
- the monitor won't wake up from sleep when i move my mouse, i have to press the power button every time.
- how do i get the picture-by-picture (pbp) mode to work? i have two computers connected but can't split the screen.
- there's a constant faint high-pitched whine or buzz coming from the back of the monitor, is this normal?
- the colors on my new lg ultrawide look washed out and dull compared to my old monitor, especially blacks.
- just got this monitor and the usb-c connection won't charge my laptop, it just shows the screen. what's wrong?
- my lg 34wn80c monitor goes black for a few seconds randomly while i'm using it, then comes back. what is this?
- device feels really hot to the touch on the top, is that normal or dangerous?
- my ac turns on but the breez plus can't change the fan speed, it just stays on auto
- the screen says 'check filter' but my ac doesn't have a cleanable filter, what's going on?
- trying to set it up but the app can't find my device during bluetooth pairing
- unit is making a loud continuous beeping sound, can't make it stop
- the scheduled turn on isn't working, my ac just stays off when it's supposed to start
- breez plus keeps disconnecting from wifi, have to reboot it constantly to get it back online
- my cielo breez plus just shows a red exclamation mark on the screen and won't control my ac, what does that mean?
- how do i clean the inside of my hamilton beach microwave without scratching it or damaging the surface?
- every time the power goes out, i have to reset the clock on my microwave, is there a way to stop that?
- there's a loud humming or buzzing noise when my microwave is running, is it broken?
- buttons on the control panel don't respond when i press them, but the clock is still on.
- door on my hamilton beach microwave feels loose and doesn't always latch, so it won't start sometimes.
- turntable in my hamilton beach microwave stopped spinning, so my food cooks unevenly, what's wrong?
- the display on my hamilton beach microwave shows 'F3' and it won't start, what does that mean?
- my hamilton beach em031 microwave won't heat up food, it just runs but everything stays cold, help?
- after a power outage, my air pro won’t come back on automatically like it used to, is there a setting?
- i replaced the filter but the unit still says ‘check filter’ on the display, did i install it wrong?
- the fan on my purifier randomly turns up to max speed for no reason, even in auto mode.
- my air pro’s light is flashing white and it beeps three times every few minutes, what’s wrong?
- how do i clean the particle pre-filter on the air pro? the manual is vague and i don’t want to break it.
- the app won’t connect to my air pro during setup, it just spins forever on the wifi screen.
- why does my air pro make a loud buzzing or grinding noise when it’s running on high fan speed?
- my molekule air pro is showing a solid red light on the front and won’t turn on, what does that mean?
- after cleaning, the floor has weird streaks or lines of cleaner, it's not evenly wet.
- the remote control does nothing, i've changed the batteries and it still won't work.
- it keeps trying to go over my dark area rug and then turns around like it hit a wall.
- how do i reset my w90? it's frozen and not responding to any buttons.
- the mop pads aren't getting wet at all, it's just dragging dry cloths.
- robot says 'please install water tank' but the tank is definitely in.
- the w90 is making a loud grinding noise from the bottom, sounds awful.
- my shinebot w90 just spins in circles or goes in weird patterns, it's not mopping right.
- the image has a noticeable yellow or green tint, especially on white screens, colors look totally off.
- battery drains super fast when it's supposed to be in sleep mode, like 30% overnight.
- keeps saying 'no signal' when i plug in my nintendo switch with the hdmi cable, my tv works fine with the same cable.
- how do i clean the lens on this thing? it's got a weird oily film and i'm scared to scratch it.
- it randomly disconnects from my wifi, especially when streaming 4k content, have to reboot to reconnect.
- the fan is ridiculously loud even when i'm just on the home screen, sounds like a jet engine.
- keeps showing 'autofocus failed' error every time i turn it on, the image stays blurry.
- my nebula capsule 3 won't turn on at all, the indicator light is completely dead after i charged it overnight.
- mysa makes a quiet but annoying buzzing sound, only when the heat is on. is this normal?
- my heater turns on with mysa but the room never seems to get up to the temperature i set, it always feels cold.
- can't add my mysa to the app, it just spins forever during the 'connecting to device' step.
- getting an 'err 8' code on my mysa, what does that mean and how do i clear it?
- mysa screen is completely blank, no lights, nothing. heater works if i wire it directly but not with the mysa.
- installed mysa but the heater won't turn off, it just runs constantly no matter what temperature i set
- my mysa keeps disconnecting from wifi every few days and i have to reboot it to get it back online
- my new mysa thermostat says 'no power' on the screen and my baseboard heaters are cold, did i wire it wrong?
- i just got the smart handle but the app says 'no data' after i brush, it's not tracking anything.
- water keeps getting inside the battery compartment of my quip handle, now the contacts are rusty.
- the 30-second pulse timer on my quip seems off, it feels shorter or longer than it should be.
- my quip makes a weird clicking or grinding noise when it's on, it didn't used to do that.
- the vibration on my quip feels really weak, like it's barely buzzing, even with a new battery.
- my quip smart guide feature in the app won't connect to my new toothbrush, it just says pairing failed.
- is there a way to clean the black gunk that builds up under the metal ring on my quip handle?
- my quip toothbrush just stopped vibrating in the middle of brushing, now it won't turn on at all, what do i do?
- the screen says 'please charge' and flashes red, but it's sitting on the dock which has a solid green light.
- suction feels really weak even on max setting, and it's not picking up much water.
- my phone won't connect to the vacuum via the app, it just spins forever trying to find it.
- the self-cleaning cycle on the dock runs but the roller never gets clean, it still smells bad.
- i’m getting error code E03 on the screen, what does that mean and how do i clear it?
- the roller brush on my floor one s5 stopped spinning, it just drags on the floor now.
- why does my tineco s5 keep saying 'please install clean water tank' even though it's definitely clicked in?
- my floor one s5 just died in the middle of cleaning and won’t turn back on, the screen is totally black.
- there's a high pitched whine or coil whine coming from the back of the monitor, is this normal?
- the osd sidekick software won't detect my monitor, it just says please connect a supported device
- the screen goes black for a second randomly during games, like it's switching resolution
- the usb-c port on my monitor isn't charging my laptop or the connection is super flaky
- my screen has these faint horizontal lines or scanlines especially in grey menus, is my panel defective?
- the kvm on my gigabyte monitor isn't switching my keyboard and mouse when i change inputs
- my m27q x monitor just shows a black screen but the power light is on blue, no signal detected
- the clock on my cmw-200 resets to 0:00 every time i unplug it or have a brief power flicker
- i'm trying to use the sensor cook features but it keeps beeping and stopping early, saying 'food is ready' when it's still cold
- the convection bake function isn't cooking evenly, one side of things is burnt and the other is raw
- how do i clean the inside roof of the cmw-200? there's grease splatter up there from convection cooking and i can't reach it
- my cmw-200's display just went blank, no lights, no response to any buttons, but i can hear a faint hum when it's plugged in
- the turntable in my cmw-200 has stopped spinning completely, just sits there even on microwave mode
- just got the cmw-200 and the convection fan is making a loud grinding or rattling sound when i use bake or roast
- my cuisinart cmw-200 microwave convection oven is showing an error code F3 and won't heat anything up
- i just got a replacement filter for my 211 plus but the red power light stays on after i install it.
- the control knob on my 211 plus feels loose and spins without clicking between speeds.
- is it okay to wash the fabric pre-filter on the blue pure 211? the manual is vague.
- how do i reset the filter change light on my blueair 211 plus? it just turned red.
- why is my blue pure 211 plus making a loud rattling or buzzing noise on the highest fan speed?
- my blueair 211 plus just has a solid red light on the power button and won't turn on, what do i do?
- the built-in android tv on my horizon ultra is so slow and apps keep crashing, it was fine for the first month.
- i'm getting a red blinking light on the power button and the projector won't respond to the remote or anything.
- the wifi on my horizon ultra keeps dropping, especially when streaming 4k. it's right next to my router and my other devices are fine.
- how do i properly clean the lens on the horizon ultra? i see dust specs in the image and i'm scared to scratch it.
- my projector fan is making a loud grinding or buzzing noise, it's way louder than it used to be and happens as soon as i turn it on.
- i keep getting a 'dolby vision not supported' error on my horizon ultra when i try to play content from my apple tv 4k.
- the autofocus and keystone correction on my horizon ultra keeps activating randomly every few minutes, it's super distracting.
- my horizon ultra projector is stuck on the xgimi logo screen when i turn it on, it won't boot into android tv.
- the light ring on my charging base is flickering or a different color, not solid white.
- my hum app isn't tracking my brushing sessions even though it's connected.
- the brush turns on by itself in the middle of the night, it's really creepy.
- how do i clean the inside of the charging base? it's got gunk in the little grooves.
- the battery life is terrible now, it dies after like two brushes even on a full charge.
- my brush makes a weird grinding noise and doesn't spin as fast as it used to.
- the hum app won't find or connect to my toothbrush during setup, it's just stuck searching.
- my colgate hum toothbrush just shows the red x on the handle and won't charge, what do i do?
- the digital temperature display keeps changing on its own, i set it to 37 but it shows 42 later
- my samsung fridge with the flexzone drawer is really loud, like a grinding or vibrating noise
- the doors on my side by side aren't aligned, the freezer door sticks out further than the fridge door
- the ice maker in my samsung fridge has stopped making ice, the arm is in the up position
- there's water pooling in the bottom of my fresh food compartment, under the crisper drawers
- my fridge is beeping constantly and the display shows 'FF' or '22'
- the water dispenser on my samsung side by side just drips or gives a tiny stream, it's not pressurized
- my samsung rs27t5200sr fridge is running but the freezer section isn't getting cold enough, ice cream is soft
- it's leaving behind a lot of pet hair and sand on my medium pile carpet, not picking up like it used to
- the vacuum just won't turn on, no lights, no sound, nothing. checked the outlet and it's fine
- how do i clean the filters on the 27909 model, the manual is gone and i don't want to ruin them
- the brush roll on my pet hair eraser turbo won't spin at all on any setting
- suction is really weak on my bissell pet hair eraser, even with a brand new filter
- my vacuum smells like burning when i use it, especially on carpet
- the rewind function on my pet hair eraser turbo isn't working, i press the button and the cord just jerks a little
- my bissell pet hair eraser 27909 just stopped in the middle of vacuuming and now the power button light is flashing red
- there's a single dead pixel stuck on red in the middle of my screen, just got the monitor. can i fix it without sending it back?
- can i mount the s2421hs on a vesa arm? i don't see any screw holes on the back.
- dell s2421hs won't wake up from sleep when i move the mouse, i have to press the power button every time.
- my monitor makes a faint buzzing or humming noise that changes pitch when i'm scrolling or have a bright white webpage open.
- the colors on my new s2421hs look really washed out and flat compared to my old monitor, especially the blacks.
- how do i turn off the annoying blue power light on the bottom of my dell s2421hs? it's too bright in a dark room.
- dell s2421hs screen is flickering randomly, especially when i'm just browsing or not in a game.
- my dell s2421hs monitor says 'no dp signal from your device' and then goes black, but the pc is definitely on.
- the schedule i set on the app doesn't sync to the actual thermostat. it just stays on hold at one temperature.
- t10 pro says 'call for heat' but my furnace isn't kicking on. my old thermostat worked fine.
- how do i get my remote sensor to actually control the temperature? it's paired but the thermostat seems to ignore it.
- the temperature reading on the t10 is way off from the actual room temp. like 4-5 degrees difference.
- getting an 'equipment short cycle' error on the screen. my heat keeps turning on and off really fast.
- thermostat keeps losing connection to wifi. i have to keep re-adding it in the app every few days.
- t10 pro screen is completely blank, no lights, touch does nothing. checked breaker and it's fine.
- my honeywell t10 pro keeps saying 'low battery' on the display even though it's wired to the furnace, what gives?
- the auto cook functions like popcorn or sensor reheat always leave my food cold in spots or burn it, are they broken?
- how do i clean the grease filter on this thing? i can't figure out how to get it off without breaking it.
- the smart things app won't find my mc11a7033ct during setup, the wifi light just keeps blinking blue.
- my microwave makes a loud humming or buzzing noise when it's running on microwave power, it's not the normal fan sound.
- the interior light in my samsung microwave oven won't turn on when the door opens or during cooking, how do i fix it?
- i get an 'E-2' error code when i try to use the microwave or any cooking function, it just beeps at me.
- the convection bake function on my samsung microwave oven burns things on the bottom, everything else seems to work fine.
- my samsung mc11a7033ct microwave just shows '88:88' on the display and won't respond to any buttons, what do i do?
- my air purifier is making a loud rattling or buzzing noise, it wasn't doing this before.
- how do i clean the actual hepa filter in my levoit 400s, can i just vacuum it?
- the auto mode on my core 400s is useless, it never speeds up even when i'm cooking and the air is smoky.
- my 400s is connected to the app but says 'offline' and i can't control it remotely.
- my levoit air purifier smells weird, like burning plastic or ozone, when i run it on high.
- the display on my 400s is dim and flickering, barely visible, is it broken?
- why does my core 400s keep beeping randomly in the middle of the night, it's driving me crazy.
- my levoit 400s is stuck on 'wi-fi' on the screen and won't respond to anything else, what do i do?
- the white light on my sonicare handle is blinking fast and it's completely dead, won't respond to anything
- can i use generic brush heads from amazon with my philips sonicare 4100 or will it break it?
- the charging light on my sonicare 4100 base is flashing amber and my brush won't charge
- water got inside the slot where the brush head attaches, is my sonicare 4100 ruined?
- my toothbrush turns off after 30 seconds, it doesn't run the full two minutes
- how do i know when my sonicare 4100 is actually fully charged? the light just stays on
- the handle on my philips sonicare 4100 is vibrating weirdly and making a loud rattling noise
- my sonicare 4100 is fully charged but just blinks green and won't turn on when i press the button
- my ge fridge just started showing all 8's on the display and none of the buttons work
- the door alarm on my refrigerator won't stop beeping even when the doors are fully closed
- the water dispenser on my ge fridge is really slow, just a trickle, but the ice maker seems okay
- how do i clean the drip tray and evaporator pan on this model, i think it's causing a bad smell
- there's a loud buzzing or vibrating noise coming from the bottom of my fridge, it comes and goes
- my refrigerator section is too warm but the freezer is super cold, like -5 degrees
- the icemaker in my ge gfe28gynfs isn't making ice, the bucket is empty but i hear it trying to cycle
- my ge french door fridge display is showing a PF error code and then goes blank, what is this?
- the temperature on the monitor is always wrong, it says 80 degrees but the room is actually 72.
- i get a loud constant beeping from the camera every few hours for no reason, it wakes the baby.
- the parent unit battery drains crazy fast, like it only lasts an hour when it's supposed to last all day.
- the night vision on my eufy camera is really grainy and looks almost foggy, daytime is fine.
- my monitor screen goes black or freezes after like 20 minutes, but the power light is still on.
- how do you clean the camera lens without scratching it? it's got fingerprints and dust all over.
- the camera on my spaceview makes a constant high-pitched whining noise, it's really annoying in the quiet nursery.
- my eufy baby monitor screen just says 'searching for camera' and never connects, even though it's plugged in right next to it.
- the trigger on my v12 feels sticky and sometimes stays on after i let go, how do i fix that?
- i washed the filter but now there's a weird whistling noise and less suction, did i break it?
- the vacuum won't stand up on its own anymore, the dock seems loose, how do i tighten it?
- my dyson v12 keeps shutting off after a few seconds, then the blue light on the charger blinks.
- how do i clean the fluffy roller head on my detect? it's wrapped with hair and won't spin.
- v12 battery drains in like 5 minutes on boost mode, is that normal or is mine defective?
- the laser on my detect slim won't turn on anymore, just the regular light works, did i break it?
- my dyson v12 just shows a red exclamation point on the screen and won't run, what's that mean?
- can i clean the screen with a microfiber cloth and water or will i damage the coating
- the hdr looks washed out and worse than when it's off on my benq mobiuz, what am i doing wrong?
- why does my 165hz monitor only show 60hz or 120hz as an option in windows display settings?
- the built-in speakers on my ex2710q sound tinny and have no bass, is mine broken?
- my monitor makes a faint buzzing or whining noise, it changes pitch when i look at different colored screens
- how do i turn off the damn orange light ring on the back of my benq mobiuz, it's distracting
- the ex2710q keeps saying 'no signal' when my ps5 is definitely on and plugged in
- my mobiuz ex2710q screen is black but the power light is on, i can hear audio from the speakers though
- i replaced my old thermostat with a sensi and now my fan won't turn off
- sensiapp keeps sending me alerts that it can't reach the thermostat but it seems fine
- my sensi display is super dim, i can barely read it even in a dark room
- the sensi app is giving me error 4002 and won't let me add my thermostat
- why does my sensi thermostat say 'reversing valve' when i try to set up heat pump?
- my sensi keeps showing 'cooling' or 'heating' but the system never actually turns on
- sensiapp says my thermostat is offline but it's still working on the wall, how do i get wifi back?
- my sensi thermostat screen went completely blank and it won't turn on no matter what i do
- how do i reset the control board on my whirlpool microwave? it's totally dead no lights
- the turntable in my microwave makes a loud clicking noise and sometimes stops turning
- my whirlpool microwave runs but doesn't heat anything up, it just hums
- the touchpad on my whirlpool microwave doesn't beep or respond when i press some buttons
- my microwave keeps tripping the GFCI outlet in my kitchen, only this appliance does it
- i replaced the bulb but the light still won't come on in my whirlpool microwave
- the vent fan on my whirlpool microwave is super loud on high speed, like a grinding noise
- my whirlpool microwave just says F2 and won't start, what does that mean?
- my airmega 400 screen says 'CL' and won't respond to any buttons. what is this and how do i clear it?
- the fan speed on my airmega 400 keeps changing by itself, jumping up to high for no reason. i'm not using the app.
- i replaced the filters but now my airmega 400 won't turn on at all, no lights, nothing. did i break it?
- the air quality light on my airmega 400 stays on purple (good) all the time, even when i know the air is bad. is the sensor broken?
- my airmega is making a loud rattling or buzzing noise, mostly on the higher fan speeds. it's not the normal fan sound.
- trying to connect my airmega 400 to the app but it just fails every time, stuck on 'connecting to device'. what am i doing wrong?
- the airmega 400 keeps beeping randomly at night, it's driving me crazy. how do i stop it?
- my coway airmega 400 just flashes a red light on the front and won't turn on, what does that mean?
- the doors on my whirlpool french door fridge don't seem aligned, one sits further out than the other.
- my whirlpool french door fridge is freezing everything in the dairy compartment on the top shelf.
- the controls on my whirlpool fridge are locked or unresponsive, i can't change any settings.
- the ice maker in my whirlpool fridge stopped making ice, the bucket is empty.
- water is pooling in the bottom of my whirlpool french door fridge, under the crisper drawers.
- the fridge side of my whirlpool french door is warm but the freezer is fine, food is spoiling.
- my whirlpool fridge is making a loud buzzing or humming noise that comes and goes, sounds like it's coming from the bottom?
- my whirlpool french door fridge water dispenser just sputters out a few drops then stops, what's wrong?
- getting a 'poor wi-fi signal' alert on the camera feed even though my phone is on the same network and works fine
- how do i clean the dream sock sensor part? i don't want to break it and the manual isn't clear
- the dream sock charging dock light is solid red and won't change to green, is the sock charging?
- owlet app says 'camera offline' even though the camera light is solid green
- the base station alarm is going off constantly even though my baby is awake and moving, oxygen reading shows dashes
- camera on the dream duo won't track my baby in the crib, it just stays in the home position
- dream sock is fully charged but dies after an hour, baby is fine but sock power is draining
- my owlet dream sock base station flashes red and the sock icon is grey and i can't connect
- the sensor cook function always overcooks my food. it's useless.
- i get a burning plastic smell when i use the vent fan on high. is it defective?
- the light under the microwave comes on by itself randomly. it's creepy.
- the clock on my lg microwave keeps resetting to 12:00 every time i have a power flicker.
- how do you clean the grease filter on this thing? it seems stuck in there.
- the turntable in my lg microwave just spins sometimes and other times it doesn't move at all.
- i just installed this microwave and the vent fan is crazy loud on the high setting. is this normal?
- my lg microwave just shows F4 on the display and won't start. what is that?
- what's the snowflake symbol for? it doesn't produce any heat
- the wheels are stuck or wobbly, can i replace them?
- is it normal for the plug to get really warm? almost hot to the touch
- the power light is on but no heat is coming out, it's been over an hour
- how do you clean the fins on this thing? dust is packed in there and it smells when it heats up
- the thermostat doesn't seem to work, it just keeps heating and never cycles off
- my oil radiator heater is making a gurgling or bubbling sound, is it leaking oil?
- my delonghi trd40615e won't turn on at all, no lights no heat nothing, i've checked the outlet
- after the latest update, my s9+ won't connect to wifi. it just blinks red on the clean button and the app can't find it.
- why does my s9+ keep trying to eat my rug tassels? it gets stuck every single time.
- the brush keeps stopping during a clean job and the app says 'clean base bin extraction issue 0'. what does that mean?
- robot says 'charging error 8' and won't dock properly with the clean base.
- my s9+ is missing huge spots in the middle of the room, it just goes around them in a weird square pattern.
- roomba s9+ says 'bin full' right after i empty it and put it back on the base.
- the self-empty base on my s9+ is super loud and sounds like it's straining every time it empties, is that normal?
- my roomba s9+ keeps getting error 31 and won't go back to the base, it just sits there beeping.
- the joystick button on the back is super hard to press and the menu keeps popping up randomly
- i'm trying to use the elmb sync but the screen gets super dark and looks terrible
- the monitor makes a faint buzzing or high pitched noise, especially on bright screens
- the built-in crosshair overlay won't turn off, it's stuck on my screen even in the osd
- my monitor won't wake up from sleep when my pc does, i have to turn it off and on again
- i'm getting a weird washed out or hazy look on my vg27aq1a, colors look flat even after calibration
- the screen on my asus tuf monitor keeps flickering when i have g-sync enabled, how do i stop it?
- my vg27aq1a monitor screen is black but the power light is on solid white, what do i do?
- my nest learning thermostat keeps switching to eco mode when i'm home, i don't want it to do that
- nest keeps blowing cold air when it's set to heat, the ac isn't even on
- how do i clean the nest screen? it's got fingerprints and smudges and i'm scared to damage it
- nest says it's heating to 72 but my house is only 68 and it feels cold, what's wrong
- i keep getting an e195 error on my nest and my heat won't turn on, what does that mean
- my nest thermostat screen is just black and won't wake up no matter what i do, it's completely dead
- can i use third party filters in the dyson bp04? the official ones are so expensive.
- dyson bp04 display says 'error 5-8' and won't start. what does that mean and how do i fix it?
- my bp04 turns off by itself overnight even though i didn't set a timer. it's plugged in securely.
- how do i clean the actual fan inside the dyson bp04? it's dusty and the manual says not to take it apart.
- the formaldehyde reading on my bp04 is always high even in a clean room, is the sensor faulty?
- dyson bp04 won't connect to wifi, it just flashes the wifi icon and fails. my other devices connect fine.
- why is my dyson purifier making a loud rattling noise on the highest fan speed? it's only a few months old.
- my dyson bp04 says filter life 0% but i just replaced them, did i install them wrong or is it broken?
- why does my nanit keep losing the breathing wear detection? it works for a bit then stops.
- the nanit floor stand won't stay tight, the camera slowly droops down overnight.
- nanit camera overheats and shuts off, i can feel it's hot to the touch on the back.
- i get 'motion detection unavailable' error on my nanit pro all the time, even with perfect wifi.
- nanit app says 'camera offline' but the camera has a solid white light, what does that mean?
- how do you clean the nanit camera lens? it's all smudged and the night vision is super blurry now.
- nanit making a constant high-pitched whining noise, it's really loud and keeps us awake.
- my nanit pro camera has a solid red light and won't show up in the app, i've tried restarting everything.
- remote control for my dyson heater stopped pairing. machine says 'no remote'.
- airflow feels really weak on all settings compared to when it was new. filter is clean.
- my hp07 screen is completely blank but i can hear the fan running. no controls work.
- there's a burning dust smell when i turn on the heat for the first time this season.
- dyson link app won't find my hp07 during setup. bluetooth light is just blinking.
- why does my hp07 heater keep shutting off after like 10 minutes? room is still cold.
- dyson hp07 making a loud rattling noise from the base when oscillating, sounds like something's loose.
- my dyson hp07 just says 'filter life expired' but i just replaced it. won't let me reset.
- after descaling, my coffee tastes terrible, like vinegar or chemicals, even after running several water cycles.
- the steam wand just sputters and shoots out hot water instead of dry steam, i can't froth milk.
- the display says 'empty grounds container' but i just emptied it, the thing is definitely not full.
- the machine is leaking water from the bottom, mostly onto the drip tray but sometimes underneath it.
- my coffee is coming out lukewarm, even though i have the temperature set to high in the menu.
- i keep getting error code 'e02' on the screen and the machine shuts down after a minute.
- my magnifica evo is stuck showing the 'rinse water circuit' message and won't let me do anything, even after i've filled the tank.
- it keeps beeping non-stop every few minutes even when it's making ice
- ice cubes are coming out really small and thin, not the full square size
- it powers on but the display is completely blank, no lights or anything
- how do i clean this thing? the manual is vague and it's starting to smell
- the fan inside is making a loud grinding or rattling noise
- it's making really cloudy or milky looking ice cubes, not clear
- ice maker turns on but just hums and never drops ice into the basket
- my newair ai-215ss keeps flashing 'E1' and won't make ice, what's wrong?
- how do i clean the nest screen? it's covered in fingerprints and the ring isn't responding well
- nest thermostat screen is flickering or flashing on and off intermittently
- i get an e195 error on my nest and now it won't control the heat
- the nest learning thermostat isn't learning my schedule, it keeps changing to eco temps when i'm home
- nest says 'delayed for 2 hours' and won't turn on the ac, it's getting hot in here
- why is my nest blowing cold air when the heat is on? it says it's heating but it's not
- nest keeps disconnecting from wifi, says it's offline in the app every few days
- my nest thermostat just went blank, screen is totally black and nothing happens when i touch it
- it keeps turning itself off after running for an hour or so, no error code, just powers down
- the remote control doesn't work, i put new batteries in but it still won't change anything
- it's leaking water onto my floor from the bottom of the unit, not from the drain plug
- unit won't turn on at all, no lights on the display, checked the outlet and it's fine
- how do i clean the filter on this ge portable ac, i can't figure out how to get to it
- it's making a really loud grinding or rattling noise when the fan is on, sounds like something's broken inside
- the display on my apca14yzmw keeps flashing 'p1' and it shuts off after a few minutes, what is that?
- my ge portable ac is just blowing air but it's not cold at all, like it's on fan mode even when set to cool
- my hp officejet pro 9125e won't pick up paper from the tray, it just makes a whirring sound and then says 'load paper' even though the tray is full.
- i keep getting error code '0xc19a003a' when trying to install the software for my new 9125e on windows.
- printer makes a loud grinding noise from the right side when it starts up or tries to print. hp officejet pro 9125e.
- the touchscreen on my hp 9125e is frozen or not responding to touches, have to power cycle it to do anything.
- trying to scan to email on my officejet pro 9125e and it keeps failing, says 'cannot connect to server'.
- my hp 9125e is printing really faded or has streaks, even with brand new hp ink cartridges installed.
- printer says 'paper jam' but i've checked everywhere and there's no paper stuck. hp officejet pro 9125e just keeps showing the error.
- my hp 9125e printer just says 'offline' on my computer and won't print anything, but it's definitely on and connected to wifi.
- it fills with water super slow, takes forever to start washing.
- clothes come out of the wash still smelling musty, even right after a cycle.
- the washer won't do anything, no lights, no display, completely dead.
- water is leaking from the bottom front of the machine onto the floor.
- the detergent dispenser drawer won't open, feels completely stuck.
- it keeps stopping and showing 'UE' on the screen, clothes are sopping wet.
- washer is making a loud grinding noise during the spin cycle, sounds terrible.
- my ge gtw840cpndg is just blinking 'PF' and won't start a cycle, what is this?
- set it to smoke but the ranger is blowing huge white smoke, food tastes bitter.
- ranger pellet grill keeps shutting off randomly, no error code, just goes dead.
- how do you clean the grease drain on the ranger? mine is completely clogged after one cook.
- the app won't connect to my ranger, it just spins forever. i have wifi enabled.
- i get constant flameouts on my ranger, fire starts then just goes out mid cook.
- why is my traeger ranger making a loud grinding noise from the auger? it's new.
- ranger grill won't get above 250 degrees, just hovers there even set to 450, pellets are feeding fine.
- my traeger ranger just shows 'err' on the screen and beeps, won't start at all, what is this?
- the dishwasher is running but my homeconnect app says it's offline. wifi password is right.
- it's leaving a white, powdery film on all my glasses and the inside of the tub. detergent is fresh.
- the control panel is completely dead, no lights, no sound, nothing. checked the outlet and it's fine.
- i keep getting the e15 error code on the display. it drains for a second then stops and shows that.
- the door won't stay closed, it just pops open an inch as soon as i let go. latch feels loose.
- there's a really loud grinding noise coming from the bottom during the wash, sounds like it's chewing rocks.
- dishes are coming out wet and kinda streaky, not fully dry, even on the auto cycle. is the heater broken?
- my bosch 500 series dishwasher just beeps three times and won’t start, the display is blank except for a clock. what gives?
- i got some battery liquid on my hands from my craftsman drill battery. should i be worried?
- how do i clean my craftsman v20 battery? it's got grease and sawdust all over the contacts.
- the worklight on my dewalt impact driver won't turn on, is there a setting for it?
- my dewalt impact driver charger light is blinking red, what does that mean?
- the led work light on my avid power drill stays on even after i release the trigger, how do i turn it off?
- dekopro cordless drill chuck won't tighten, bit keeps slipping out. how do i fix this?
- the led light on my dekopro drill won't turn on when i pull the trigger, is it broken?
- the bit keeps falling out of my avid power drill chuck, even when i tighten it hard
- avid power drill battery won't charge, charger light doesn't come on. help?
- my frigidaire ice maker isn't making much ice, takes forever. ambient temp is fine.
- frigidaire eficefic189 ice maker says ADD WATER but the tank is full. why?
- the side handle on my milwaukee drill keeps coming loose while i'm drilling, how do i fix it?
- milwaukee m18 fuel drill chuck won't tighten all the way, bit keeps slipping out
- can i use my gowise air fryer on my granite or stone countertop?
- my breville bambino plus steam wand isn't producing any steam. it just sputters.
- my breville bambino plus won't turn on, all the buttons are dark. what's wrong?
- ge profile dishwasher door won't stay closed/latches weird. did i break the seal?
- can i wash my furnace filter or paint brushes in my ge profile dishwasher?
- the ice tastes weird, kind of plasticky or like the cleaner, even after rinsing. how do i get rid of the taste?
- i left it off for a week and now it won't turn on at all, no lights, nothing. is it dead?
- the ice full sensor is broken, the light comes on when the basket is only half full and it stops making ice.
- it's making a loud grinding or buzzing noise that wasn't there before, mainly when it's trying to drop ice.
- i'm trying to clean it but the clean light just keeps blinking and it won't start the cleaning cycle.
- the ice maker is running constantly but making tiny, thin slivers of ice instead of cubes, how do i fix this?
- my euhomy im-01 just arrived, i added water and turned it on but no ice is coming out after 20 minutes, what gives?
- it's running constantly but only producing a tiny amount of ice, maybe a handful every few hours.
- how do i actually clean this thing, the manual is confusing and i don't want to break it.
- my machine just stopped in the middle of a cycle and now the control panel is completely dark, no lights at all.
- it keeps showing 'add water' but the tank is completely full, it's not detecting the water level.
- the ice it makes is really soft and melts super fast, it's like slush not solid nuggets.
- i can't get my opal to connect to the smartHQ app no matter what i try, it just times out.
- opal 2.0 making a loud grinding or whining noise, sounds like it's struggling, is it broken?
- my ge opal 2.0 is just flashing the red light and the cleaning button, won't make any ice, what do i do?
- water is leaking from the bottom of the container where it attaches to the blade. is my container broken?
- the programmed smoothie cycle stops too early and leaves big chunks. what am i doing wrong?
- my vitamix smells like burning plastic or electronics when i run it. is this normal for a new one?
- blender won't connect to the vitamix perfect blend app. stuck on 'searching for device'. help.
- i can't get the self-cleaning cycle to work on my vitamix. it just runs for a few seconds and stops.
- the touchscreen on my a3500 is frozen and doesn't respond to any taps. how do i reset it?
- why is my vitamix so loud and vibrating like crazy on the counter? it's brand new.
- my vitamix a3500 just flashes 'F1' and won't start. what is this error code?
- there's a high pitched whining noise coming from the drill when i use it at low speed, is the motor going bad?
- the chuck gets stuck and i can't loosen it by hand to change bits, do i need the key?
- my drill feels weak, it stalls out way easier than it used to, even with a fresh hp battery.
- the light around the trigger stays on all the time even after i take the battery out, is it draining the battery?
- how do you change the speed settings on this thing? i can't get it to go slow for starting screws.
- the drill just stopped in the middle of driving a screw and now it only makes a clicking sound when i pull the trigger
- drill works but the chuck wobbles a lot when it spins, is the shaft bent or something?
- my ryobi hp drill just flashes a red light on the battery indicator and won't run at all, what's wrong?
- the lg onscreen control software doesn't detect my monitor, it's just connected with displayport
- can i clean the nano ips screen with a microfiber cloth and water or will it ruin the coating
- there's a permanent faint vertical line on the left side of the screen, about an inch from the edge
- hdr looks washed out and terrible in windows 11 desktop and some games, what am i doing wrong
- the screen randomly goes black for a second or two then comes back while gaming, especially in hdr
- how do i get 160hz at 4k to work? it's stuck at 120hz or 144hz in windows and nvidia control panel
- the back of my monitor makes a faint high-pitched buzzing or whining noise, changes when i move menus
- my new lg ultragear 27gn950-b says no signal on both hdmi and displayport, pc definitely on
- screen has a weird purple or green tint on the edges, especially in dark scenes, is this normal?
- the crosshair aim point in the center of the screen won't turn off, i must have pressed something
- my monitor keeps saying 'check signal cable' and going to sleep even though the pc is on
- there's a faint but constant high pitched whining or buzzing noise coming from behind the screen
- the colors look really washed out and flat on my lg gaming monitor compared to my laptop screen
- how do i get 180hz to show up in windows? my lg monitor is stuck at 144hz max
- the screen on my 27gp850-b goes black for a second randomly during games, like it's switching inputs
- my new lg 27gp850-b says no signal when i turn my pc on, but my old monitor works fine
- trying to install and it's stuck on 'connecting to sensi' screen forever during wifi setup.
- the temperature reading on the thermostat is wrong, it's showing 75 but the room feels like 68.
- getting an 'e1' error code on the screen and the furnace won't run. what is that?
- why does my sensi touch keep switching from 'heat' to 'off' by itself? i didn't program that.
- the touch screen on my sensi is super laggy and sometimes doesn't register my taps.
- thermostat keeps losing wifi connection every few days, have to reboot it to reconnect.
- installed my sensi touch but it says 'no power to y1' and the ac won't turn on.
- my sensi touch thermostat screen is completely black and unresponsive, no backlight at all. it’s just dead.
- eero 6+ gets really hot to the touch, is this normal or a fire hazard?
- can't add a new eero 6+ as a node, the app just spins and never finds it.
- my upload speeds are terrible on eero 6+, like 5 mbps, but download is fine. what's wrong?
- the eero app says my node has a 'weak connection' to the gateway, how do i fix the mesh signal?
- eero 6+ says it's connected but i have no internet on any device, even wired.
- my devices keep switching to the wrong eero node and getting slow speeds, how do i force them to connect to the closest one?
- why is my eero 6+ blinking red? it was working fine yesterday.
- my eero 6+ keeps flashing blue and won't connect, what do i do?
- the port forwarding i set up on my archer ax21 isn't working for my game server
- i can't get my old printer to connect to the wifi on the new ax21 router
- the wifi keeps dropping for a second every few minutes on my ax21, it's really annoying for calls
- why is the internet so slow on my laptop even though i have the ax21 wifi 6 router
- updated the firmware on my ax21 and now it's stuck in a boot loop, lights just cycle on and off
- my 5ghz wifi network just disappears randomly on the ax21 and only the 2.4 shows up
- just got the ax21 and i can't even get to the setup page, tplinkwifi.net just times out
- my archer ax21 router's internet light is solid orange and i have no connection
- the front 'drum' light is flashing but the 'ready' light is on, and it won't print my job.
- it won't print from my computer anymore, just says 'error' on the printer screen.
- all my prints have a repeating vertical faint line or smudge down the whole page.
- it's making a loud grinding or clicking noise every time it tries to pick up a sheet of paper.
- trying to connect my brother l2350dw to wifi and it just won't find my network during setup.
- printer says 'drum life end' with a flashing error light, can i still use it for a while?
- my brother l2350dw just shows 'toner life end' and won't print anything, do i really need a new one already?
- after a power outage, the clock is blinking 12:00 and my saved custom smart cook settings are gone.
- food in the top basket always cooks way faster and burns compared to the bottom basket, even at the same temp.
- the touchscreen buttons on my control panel are not responding unless i press really hard.
- my air fryer makes a loud rattling or grinding noise only during the dehydrate setting.
- how do you clean the inside of this thing? grease splatter behind the heating elements looks impossible to reach.
- i get an ERR message on the display sometimes, usually when switching between functions.
- the sync finish feature on my dz401 never works right, one basket is always done way before the other.
- my new ninja foodi dual air fryer just beeps three times and won't start cooking, it's plugged in and the baskets are in.
- the touch buttons on my cosori are not responding or beeping randomly, have to unplug it to stop.
- my food is coming out soggy not crispy, even when i use the preset for fries, what am i doing wrong?
- the non-stick coating inside my cosori basket is peeling off in little flakes, is that safe?
- i can't get the app to connect to my turboblaze, it just spins forever trying to find the device.
- cosori turboblaze fan is making a loud grinding or rattling noise, it's brand new.
- the basket on my turboblaze 6qt is stuck and i can't get it out of the drawer, feels like it's welded in there.
- why does my cosori air fryer keep turning off by itself halfway through cooking?
- my cosori turboblaze just shows an e1 error code and beeps, what does that even mean?
- water is leaking from the bottom of my lattissima one, underneath the machine
- milk frother says it's working but just pours cold milk, no steam or foam at all
- after descaling, my machine now has a solid red light and won't respond to any buttons
- the used capsule container fills up with watery coffee sludge and overflows every time i brew
- lattissima one coffee comes out lukewarm, not hot, even on the highest temperature setting
- machine turns on but no water comes out of either spout, just a clicking sound
- the milk frother on my nespresso lattissima one is making a loud screeching noise and barely any foam
- my lattissima one just blinks the descaling light and won't let me brew anything, how do i make it stop
- the touch controls on the panel are unresponsive or beep when i don't touch them
- after moving, my lg washer shakes violently and walks across the floor on high spin
- door lock light just flashes and it won't start, no error code, just the flashing lock
- it leaves a blue or gray sticky lint all over dark clothes, i've cleaned the filter
- the smartthinq app won't connect to my washer, it just times out during the wifi setup
- washer makes a loud grinding or rubbing noise only on the agitate part of the cycle
- getting an le error code on my lg top loader during the spin cycle, clothes are sopping wet
- my lg wt7900hba says su and just sits there filling with water forever, it never starts washing
- the detergent dispenser drawer on my wf45r6100aw won't open, it's stuck shut.
- the washer is leaking a small pool of water from the bottom front, not every time but randomly.
- clothes are coming out sopping wet at the end of the cycle, it's not spinning properly.
- my samsung washer won't turn on at all, no lights, no display, nothing when i press power.
- getting a really bad musty smell from my front load washer, even right after running a clean cycle.
- the door on my samsung washer won't unlock after the cycle finishes, it's just stuck closed.
- sudden loud banging noise during the spin cycle on my wf45r6100aw, sounds like it's going to walk across the floor.
- my samsung front loader is beeping non-stop and won't start a cycle, just shows '5E' on the display.
- how do i clean the filter on this thing? the manual says to wash it but it never seems to dry.
- there's a high pitched whining noise coming from the top of my dyson, near where the filter is.
- my vacuum keeps tipping over backwards when i use the hose, it's really annoying.
- the clear bin on my animal 3 is full but the suction feels really weak, emptying it didn't help.
- i can't get the hose to click back into the vacuum, it just wobbles and falls out.
- why is my dyson so hard to push on the carpet now? it feels like it's stuck.
- the brush roll on my ball animal 3 just stopped spinning on the carpet, it worked yesterday.
- my dyson animal 3 just beeps three times and shuts off when i try to use it, what's wrong?
- i can't get the bluetooth on my masterbuilt to connect to the app, it just searches forever and never finds the smoker
- my masterbuilt smoker makes a loud clicking sound over and over when it's heating up
- the control panel buttons on my masterbuilt electric smoker aren't responding, i press them and nothing happens
- water keeps leaking out of the bottom of my masterbuilt digital smoker from somewhere under the door
- my masterbuilt smoker won't get up to temperature, it stalls like 50 degrees below where i set it
- the wood chip loader on my masterbuilt electric smoker keeps catching fire and smoking like crazy, not just smoldering
- error code erl on my masterbuilt digital electric smoker, what does that mean?
- my masterbuilt digital smoker keeps turning off by itself halfway through a smoke, the display just goes blank
- just assembled my 850 and the control panel is blank, no lights, nothing. checked the outlet, it's good.
- how do you clean the grease tray on this thing? it's welded in there and the drip cups don't catch half of it.
- the auger on my pellet grill is making a loud clicking sound but it's not turning. hopper is full.
- my temperature is all over the place, set it to 250 and it swings from 180 to 350. how do i fix this?
- i can't get the app to connect to my navigator grill, it just spins forever. bluetooth is on.
- the fan on my pit boss is making a loud grinding noise, it's not the normal hum. sounds bad.
- why does my 850 keep shutting off randomly in the middle of a cook? it just goes dead.
- my navigator 850 just shows er1 on the screen and won't light up, what is that?
- the display says 'P1' and it won't cool. what is error code p1?
- how do i clean this thing? the manual is confusing and i don't want to break it.
- my portable ac is running but the room isn't getting any cooler, it's set to 65.
- the remote for my honeywell ac stopped working, do i need a new one?
- it's making a loud grinding or rattling noise when the fan runs, sounds bad.
- the honeywell portable ac won't turn on at all, no lights, nothing. checked the outlet.
- my mo08ceswk is leaking water onto the floor from the back, not the front bucket. help?
- my honeywell portable ac is just blowing regular fan air, not cold at all, what's wrong?
- water is leaking from the bottom of the unit onto my floor when it's running.
- the remote control doesn't work unless i'm right next to the unit. replaced batteries, no change.
- the unit freezes up into a block of ice on the back coils after running for a few hours.
- how do i clean the filter on this thing? the manual is unclear and it feels stuck.
- it won't turn on at all, no lights, no display, nothing. checked the outlet and it's fine.
- my portable ac is making a loud gurgling or water sloshing sound inside, is that normal?
- the bpact14wt keeps flashing e1 and won't start cooling, i just installed it.
- my black and decker portable ac unit is just blowing regular air, not cold at all, what's wrong?
- stuck on the amazon logo screen during boot, won't go any further. tried unplugging it a bunch of times.
- fire stick 4k max gets really hot to the touch, is that normal or is it going to break?
- can't get dolby atmos sound from my fire tv 4k max to my soundbar, it just outputs pcm or dolby digital.
- my fire tv stick 4k max is making a faint buzzing or whining noise from the hdmi port area, it's really annoying.
- remote for my fire tv stick 4k max is super laggy or not working at all, but the tv controls part still works.
- getting 'application error' and 'out of memory' messages on my fire tv stick 4k max, mostly on hulu or prime video.
- why does my fire stick 4k max keep disconnecting from wifi constantly? netflix just stops and says it's offline.
- my new fire tv stick 4k max won't show anything on the tv screen, just a black screen or 'no signal' but the light is on.
- how do i clean the screen on the echo show 10 without damaging it or the camera?
- the sound on my echo show 10 suddenly got really tinny and quiet, like it's only playing from one side.
- trying to set up my new echo show 10 but it won't connect to my wifi, just keeps spinning on the language screen.
- the base on my echo show 10 is making a loud grinding noise when it turns, how do i fix it?
- my echo show 10 keeps saying 'sorry, something went wrong' when i try to play spotify or make a call.
- how do i stop my echo show 10 from following me around the room, it's creepy.
- echo show 10 screen went black but i can still hear alexa talking, is it broken?
- my echo show 10 just spins in a circle constantly and won't respond to voice commands, what's wrong?
- i just got it and the wifi/app setup won't work, it never finds the device during pairing
- it shuts off after only a few minutes of running, not because the bucket is full, what's wrong?
- the bucket is full light comes on even when it's completely empty, unit shuts off and won't run
- how do i clean the filter on this thing? i can't find where it's at on my midea
- it's making a loud gurgling or bubbling noise, almost like water is running through it, is that normal?
- the continuous drain hose setup isn't working, water is still filling up the bucket instead of draining out
- dehumidifier turns on but doesn't pull any water out of the air, bucket stays dry after a whole day
- my midea 50 pint dehumidifier shows e1 and just beeps, what does that mean and how do i make it stop?
- my opener makes a loud humming noise but the door doesn't move at all
- door opens fine but when closing it gets almost all the way down and then pops back open
- genie 550 light won't turn off, it just stays on for hours after the door closes
- how do i reprogram my genie 550 after i changed the batteries in the remote and now it doesn't work
- my garage door opener is crazy loud all of a sudden, sounds like metal grinding
- the lights on my genie 550 flash 10 times and it won't respond to any commands
- genie 550 opener remote and wall button work but the door only moves like 6 inches and then reverses
- my genie 550 chain drive opener just clicks repeatedly when i try to close the door and then it stops
- door opens all the way but then immediately starts closing again by itself
- remote works but the wall control panel is totally dead, no lights at all
- battery backup on my 87504 beeps every 30 seconds, how do i make it stop?
- the yellow learn button light on my liftmaster is blinking but i didn't touch it
- myq says my garage door is open when it's definitely closed, status is wrong
- garage door opener is making a loud grinding noise but only when going down
- liftmaster smart garage opener won't connect to my wifi, the light just blinks blue forever
- my liftmaster 87504 just beeps three times when i try to close it, what's that mean?
- setup failed with error code 1006 on my solo cam s340. what does this mean?
- how do i clean the solar panel on the s340? it's gotten dusty and doesn't seem as efficient.
- the s340 makes a loud clicking noise every few minutes, sounds like it's coming from inside.
- getting a 'person detection failed' error on my s340, it's recording cars but not people walking by.
- my camera's recordings are super blurry at night, the dual lenses don't seem to be working right.
- the solar panel on my s340 says it's charging but the camera battery percentage keeps going down, not up.
- eufy solo cam s340 is offline in the app but the solar panel light is on. how do i get it back online?
- my new eufy s340 cam won't connect to wifi, it just keeps searching and fails. i know my password is right.
- set up a new blink outdoor 4 but the app says 'cannot complete setup' after scanning the qr code, just spins forever
- my camera's infrared night vision is just showing a bright white spot in the middle of the video, everything else is dark
- how do you clean the lens on a blink outdoor 4 without smearing it or damaging the weather seal
- blink sync module 2 keeps going offline and taking all my outdoor 4 cameras with it, have to unplug it daily
- getting a 'network error' when trying to live view my blink outdoor 4, but the clips record fine
- why does my outdoor 4 camera delay so long before it starts recording motion, i see the person walk by before the clip begins
- blink outdoor 4 battery drains in like a week even with minimal motion, says it's supposed to last two years
- my blink outdoor 4 camera just shows a solid red light and won’t connect to sync module no matter what i do
- the soundbar keeps switching its input away from hdmi arc by itself. it's really annoying.
- my tv remote volume doesn't control the soundbar volume over hdmi arc like it should.
- soundbar remote isn't working, but the buttons on the bar itself do. is the remote dead?
- the rear satellite speakers on my sp7y keep cutting in and out or sound really weak.
- getting a really bad buzzing/humming noise from the soundbar speakers, not the sub. happens on all inputs.
- lg sp7y subwoofer is connected but no bass, just silent. the light is on.
- soundbar says 'no signal' when my tv is on and connected via hdmi arc. how do i fix it?
- my lg sp7y soundbar won't turn on at all, no lights, nothing. what do i check?
- my samsung tv and q990c won't turn on or off together using the tv remote, even though they're connected with hdmi.
- the voice from dialogue is really hard to hear, but explosions and music are way too loud. how do i fix this balance?
- getting a weird popping or crackling sound from the soundbar, especially during quiet scenes or when pausing content.
- my soundbar remote just stopped working, even with new batteries. the buttons on the bar work fine.
- dolby atmos content sounds flat, like it's not coming from above me at all. did i set it up wrong?
- the subwoofer on my hw-q990c keeps disconnecting and reconnecting, the green light on it blinks.
- soundbar turns on but no sound comes out from any source, the display just shows 'TV ARC'.
- my q990c rear speakers have a constant hiss or static noise even when nothing is playing, is this normal?
- when i turn on my game console, the lg tv says 'no signal' on the hdmi port. i have to unplug and replug the hdmi cable to get it.
- the magic remote for my lg nano 75 keeps disconnecting or the pointer is super laggy and unresponsive.
- the audio from the tv speakers cuts out for a split second every few minutes, happens on all hdmi inputs and apps.
- how do i clean the screen on this lg nanocell without damaging it? the microfiber cloth just smears it.
- the built-in apps like netflix and disney+ keep freezing or buffering constantly but my internet is fine on every other device.
- i'm getting a weird vertical line or band of discoloration down the left side of my lg nanocell screen, it's there on all inputs.
- the tv keeps randomly turning itself off after like 20 minutes of watching. no error code, just goes black and the red light blinks.
- my new lg 65nano75 just got delivered but the screen is completely black, no sound, nothing when i press power. the red light is on though.
- the audio keeps cutting out for a second every few minutes when using the built-in speakers. happens on all inputs and apps.
- i get this weird flashing or stutter in dark scenes when watching dolby vision content on disney+. doesn't happen with other apps.
- the tv randomly turns itself on in the middle of the night. i have all the bravia sync and wifi power settings off.
- the google tv home screen is so slow and laggy on my a80l, apps take forever to open. it wasn't like this when i bought it.
- how do i clean the screen on this oled? the manual says not to use any liquids but it's got fingerprints and dust.
- the tv keeps saying 'no signal' from my playstation 5 even though it's definitely on and plugged into hdmi 3. have to unplug everything to get it back.
- just got this oled and there's a faint high-pitched whine or buzz coming from the back, only when bright white screens are showing.
- my new a80l won't connect to my 5ghz wifi, only sees the 2.4. everything else in the house works fine on the 5.
- the door feels loose and doesn't seem to close as firmly as it used to, is this dangerous?
- the clock on my farberware microwave resets to 0:00 every time i have a power flicker, is there a battery?
- it just stopped working, no lights, no display, no power at all. checked the outlet and it's fine.
- the turntable won't spin at all, it just sits there and my food cooks unevenly
- how do i clean the inside? the top has this brown splattered film that won't come off
- it makes a loud humming or buzzing noise when it runs but the plate still spins
- the interior light in my fmo11ahtbkb won't turn on when the door opens or during cooking, is it burnt out?
- my farberware microwave just beeps three times and won't start when i hit the cook time buttons
- door won't close all the way on my lg neochef, it feels like it's hitting something
- the popcorn button always burns my popcorn, is it just broken?
- can't get the smart things app to connect to my neochef, it just times out every time
- the turntable in my lmc0975st makes a loud grinding noise and sometimes just stops turning
- i get an f2 error when i try to use the sensor cook functions, what does that mean?
- the easyclean coating inside my neochef is turning brown and sticky, is it ruined?
- lg neochef keeps beeping 3 times after it finishes cooking, how do i make it stop?
- my lg neochef microwave just shows '88:88' on the display and won't respond to any buttons, what do i do?
- the sanitize light never comes on after a cycle, even on the sanitize setting. is it broken?
- the third rack on top keeps falling down when i pull out the lower rack, it's super annoying.
- i keep getting an e24 error code on my bosch dishwasher, what does that mean and how do i clear it?
- the control panel on my bosch 800 is totally dead, no lights, no response, but i can hear a faint hum inside.
- dishes are coming out wet and not dry even on the extra dry setting, this bosch 800 has crystaldry.
- dishwasher is making a loud grinding or rattling noise during the wash cycle, sounds like it's coming from the bottom.
- water stays in the bottom of my bosch shpm88z75n after a cycle, it's not draining fully.
- my bosch 800 series dishwasher just shows three dashes "---" on the display and won't start, what's wrong?
- the cycle time keeps adding hours, it says 3 hours left then jumps to 5, never ends.
- the door on my lg front control dishwasher is really hard to close, have to slam it.
- getting an IE error code on the display, cycle won't start.
- the control panel on my LDFN4542S is beeping randomly and buttons don't respond.
- it's making a loud grinding noise during the wash cycle, sounds bad.
- dishes are still wet and spotted after a cycle on my quadwash lg, not drying right.
- lg dishwasher showing OE error code, what does that mean?
- my LG LDFN4542S dishwasher won't start at all, no lights, nothing. what do i do?
- all four lights on my mooka filter indicator are lit up and blinking, what does that mean?
- the remote control for my absolute ozone generator isn't working. how do i wire it correctly?
- how do i protect my absolute ozone generator from water damage? i'm using it for a water treatment setup.
- the light on my aromax is red, i pressed the button but nothing happens?
- my aromax keeps shutting off after like 20 minutes, how do i make it run longer?
- puroair 240 air purifier seems weak, not pulling much air. how do i check if it's working right?
- how do i turn off all the lights on my winix 5510 for sleeping?
- winix 5510 check filter light is on but i just replaced the filter, how do i reset it?
- what does the filter reset button do on my coway ap-1512hh? the light is on.
- coway air purifier airflow feels super weak, like it's barely blowing. help?
- why does my voopnu purifier keep randomly switching to high speed in auto mode? the air seems fine.
- how do i reset the filter light on my voopnu purifier? it keeps flashing.
- can i use my levoit air purifier in my bathroom after a shower? it gets pretty steamy.
- why is my levoit air quality indicator always red even when the room feels fine?
- going on vacation for a month, what should i do with my aquasana under sink filter?
- my aquasana water pressure is really slow from the new faucet
- how do you clean a sceptre gaming monitor screen without damaging it? i don't want streaks.
- my brother printer support app settings keep resetting every time i print from a different program, is this normal?
- brother work smart 1360 wireless printer installed but can't change paper size, only shows letter. how do i print on a4?
- the water from my aquatru doesn't seem cold enough. how do i make it colder?
- my aquatru countertop reverse osmosis unit isn't dispensing any carbonated water, just flat. what's wrong?
- is it okay to use my express water ro5dx if my tap water has super high dissolved solids? like over 1000?
- just got an express water ro5dx, is the water safe to drink if it tastes kinda salty?
- will the cuzn uc-200 filter make my water softer or reduce TDS?
- how do i know when to replace the filter in my cuzn uc-200?
- can i hook up my ispring ro system to hot water to make it work faster?
- water from my new ispring faucet is cloudy or has bubbles, is it safe to drink?
- my bluevua ropot's tds reading on the screen is high, like 100+ on the OUT side, isn't it supposed to be lower?
- just replaced the filters on my bluevua ro100ropot and now it won't start at all, the button does nothing
- ispring rcc7ak-bn tank valve connection is dripping, i used teflon tape, what now?
- my ispring rcc7ak-bn ro faucet is just a slow trickle, tank seems empty, what gives?
- how often do i really need to change the brita longlast+ filter? the manual says 6 months but my water still tastes fine.
- how do i reset the filter light on my brita pitcher after i change it?
- how do i store my ego mower for the winter? can i just leave it in the shed?
- ego lm2135sp mower starts but then shuts off immediately with an orange flashing light, what's that mean?
- can i use my nutri bullet pro 900 to grind coffee beans or spices?
- can i put my crock pot cook and carry stoneware in the dishwasher? the manual is gone.
- can i put the inner pot from my powerxl air fryer in the dishwasher?
- how do i clean the base of my powerxl grill air fryer combo? it's got some splatter on it.
- why does my irobot roomba i3+ keep dying in the middle of the room and not going back to charge?
- i lost one of the plastic lids for the portable cups, can i buy a replacement or do i need a whole new cup?
- the blades on my koios blender are dull and don't chop ice anymore, they just spin it around
- my koios blender stopped working suddenly, no light, no sound, completely dead
- how do i clean the black gunk that gets stuck under the rubber seal in the blender cup? it smells
- one of my koios cups wobbles a lot when it's screwed onto the base, it doesn't sit flat
- the blender base gets really hot and smells like burning plastic after running for maybe 30 seconds
- the koios 17oz portable cup leaks from the bottom seal every time i make a smoothie, it's messy
- my koios personal blender motor just hums for a second and then stops when i press the button, it doesn't actually blend anything
- the motor runs for a second then stops, like it's stuttering, won't blend
- i see a small crack in the bottom of my plastic cup, is it safe to use
- the cup is stuck on the base and i can't twist it off
- my smoothies are always chunky, it's not crushing ice or frozen fruit well
- how do i clean the base where the cup locks in, stuff is stuck under there
- the lid leaks every time i make a smoothie, it's a mess
- blender makes a loud grinding noise but doesn't blend, just spins the blade loosely
- my ninja fit blender base won't turn on at all, no lights or anything, i just got it
- the digital timer keeps adding time by itself when i'm trying to set it, can't get the right number
- how do you clean the inside roof of this thing? grease splattered all over the top heating element cover
- my air fryer oven shuts off randomly in the middle of cooking, no error code, just goes black
- the touch buttons on my sweetcrispy are not responding, have to press them like ten times to work
- food is burning on top but still raw underneath in my sweetcrispy, using the air fry setting at 400°F
- my square air fryer oven makes a loud grinding noise when the fan starts, sounds like it's hitting something
- the window on my sweetcrispy 6qt is completely fogged up after one use, can't see anything inside, is this normal?
- my sweetcrispy air fryer oven just beeps three times and won't start cooking, the display just shows a number
- how do i clean the inside water tank on the kbv select? it's getting cloudy and i see some sediment.
- the glass carafe for my technivorm sits crooked on the warmer and it doesn't feel stable, is this right?
- water is leaking from the bottom of my moccamaster, underneath the machine, not from the carafe.
- the manual brew switch on my select model feels loose and won't stay engaged to pause the flow.
- my kbv select makes a loud humming or buzzing noise from the base when it's heating, is that normal?
- the carafe lid on my moccamaster 53941 is leaking steam and coffee drips down the side when i pour, making a mess.
- coffee is coming out way too weak and cold from my technivorm moccamaster kbv select, even on the strong setting.
- my moccamaster select kbv select won’t turn on at all, the power switch just clicks and nothing happens, no light.
- the 'hot' light on the warmer plate stays on forever, even with the carafe removed. seems like it's overheating.
- the 1-4 cup setting doesn't work right, coffee still tastes burnt and weak on that setting.
- coffee leaks all over the counter from the bottom of the machine, not from the carafe.
- the clock resets every time i unplug it or there's a power flicker. have to reprogram the time constantly.
- it's making a loud gurgling or rattling noise during the brew, sounds like it's struggling.
- the 'clean' light is flashing and it won't let me brew. how do i make it stop?
- coffee tastes weak and lukewarm from my perfectemp, even on the strongest brew setting. it's not even hot.
- my cuisinart perfectemp coffee maker won't turn on at all, no lights, nothing. i've checked the outlet.
- the colors on my arzopa look really washed out and dull compared to my laptop screen, how do i make it more vivid?
- i connected my nintendo switch to the arzopa with usb-c but it's not charging the switch, just showing the picture
- the touch buttons on the side of my arzopa monitor are super sensitive and keep bringing up the menu when i don't want them to
- i can't get the hdr mode to turn on or do anything, the setting is there but the picture looks the same
- my arzopa monitor works fine for a bit then the screen starts flickering like crazy, especially on brighter scenes
- the built-in kickstand on my arzopa feels super loose and won't hold the screen up anymore, did i break it?
- i'm trying to use the 144hz mode on my arzopa but my pc only shows 60hz as an option, how do i fix this?
- my arzopa portable monitor turns on but just shows a black screen, no signal message or anything, what's wrong?
- my kyy monitor makes a faint high-pitched buzzing sound when it's on, especially when displaying a bright white screen.
- the smart cover for my kyy monitor won't fold into a stable stand, it just flops over and the monitor falls flat.
- can't get the auto-rotate to work on my kyy portable monitor, the screen stays landscape even when i turn the monitor vertically.
- the screen on my kyy monitor has a yellowish tint on the left side and cooler colors on the right, is this normal?
- my kyy monitor is connected and shows my desktop, but the colors look totally washed out and dim, hdr setting is greyed out.
- the touchscreen on my kyy portable monitor stopped working after i updated windows, it's just a regular display now.
- got a weird flickering horizontal line across the bottom of my kyy 15.6 inch monitor when i move it, goes away if i hold it still.
- my kyy portable monitor turns on for a second, shows the logo, then goes black and won't display anything from my laptop.
- there's a thin vertical line on the left side of my samsung curved monitor that won't go away
- the joystick button on the back of my monitor is stuck or unresponsive, i can't open the menu
- the colors look washed out and weird when i connect my ps5 to the samsung S36GD
- how do i clean the curved screen on my samsung monitor without damaging the coating?
- the screen randomly goes black for a few seconds then comes back while gaming on my S36GD
- my samsung curved monitor makes a faint buzzing or humming sound, especially when the screen is bright
- the 100hz refresh rate option is grayed out in windows display settings on my samsung s36gd, it's stuck at 60hz
- my samsung S36GD monitor is showing 'Check Signal Cable' with a black screen even though the hdmi is plugged in
- it randomly goes offline or disconnects in the middle of printing a batch of labels
- the peel function isn't working, the label doesn't separate at the edge, i have to tear it off
- bluetooth works but it won't connect over usb to my windows laptop, device manager shows an unknown device
- every label prints about half an inch too far to the left, cutting off the tracking barcode
- it just shows a solid red light and won't do anything when i press the power button
- labels are printing but coming out super faint and faded, almost unreadable, even with new labels
- printer is making a loud grinding noise when it tries to feed a label, like it's stripping gears
- my bluetooth thermal label printer won't connect to my phone, it just keeps searching and then times out
- i put in a new tape but it keeps saying 'out of tape' on the screen. it's full.
- the label printer keeps disconnecting from the app mid-design, have to reconnect constantly.
- how do i clean the cutter blade? it's not cutting all the way through the tape anymore.
- it's making a grinding noise when it feeds the tape out, sounds bad.
- the app says 'tape mismatch error' and won't let me print anything. what does that mean?
- my label maker is printing really faint, like the text is barely there. tape is new.
- bluetooth won't find my nelko label printer on my phone, it worked last week.
- my nelko p21 won't turn on at all, just completely dead. i charged it for hours.
- the ice basket is full but the machine didn't stop, it just overflowed ice everywhere.
- water is leaking from the bottom of the machine onto my counter, where is it coming from?
- it's only producing about half the ice it should, way less than 40lbs a day. what's wrong?
- i just got it and followed the instructions but it says 'add water' even though the tank is full.
- the auto clean light is on and it won't let me make ice, how do i get it out of cleaning mode?
- it's making a loud grinding or clicking noise when it's trying to make ice, should i turn it off?
- the ice coming out is really wet and mushy, not the dry nuggets it's supposed to make. how do i fix this?
- my sencre nugget ice maker is just flashing the red light and won't make any ice, what does that mean?
- the ice tastes really plasticky or like the cleaning solution, even after several batches.
- it keeps giving me the 'E1' error code and shuts off. what does that mean?
- water is leaking from the bottom of my ice maker, just a small puddle every time it runs.
- the power light is on but the whole control panel is dead. none of the buttons do anything.
- my olixis is making tiny, thin slivers of ice instead of cubes. it's more like snow.
- how do you actually run the clean cycle on this thing? i pressed the clean button but nothing seems to happen.
- ice maker says it's making ice but the basket is empty after hours. it just keeps running cycles and dumping water.
- my olixis ice maker just arrived but it's making this loud rattling noise as soon as i plug it in, sounds like something's loose inside.
- the ice tastes weird, kind of plastic or chemical, even after multiple cleaning cycles. is this normal?
- just got it, followed the setup, but the power light is on and nothing happens. no noise, no cycle start.
- water is leaking from the bottom of the machine onto my counter, what should i check?
- my pebble ice maker is making a loud grinding or rattling noise during the harvest cycle.
- the self cleaning light is blinking and it won't let me make ice, how do i cancel it or make it stop?
- ice cubes are coming out really small and thin, like slush, not solid nuggets. how do i fix this?
- euhomy ice maker showing E1 error code, what does that mean?
- my euhomy nugget ice maker stopped making ice and just keeps running with a humming noise, no ice comes out.
- pressed the power button and nothing, no lights, completely dead
- the ice basket is full but the machine won't stop, it just keeps making ice and it overflows
- water is leaking from the bottom of the ice maker onto my counter
- it's making really small, thin ice or a slush instead of solid cubes
- how do i clean this thing? the manual says to clean it but i can't find a cleaning mode or anything
- ice maker turns on but won't start a cycle, the power light is on but nothing happens
- newair ai-215ss making a loud grinding or buzzing noise when it's trying to make ice
- my newair ice maker just keeps flashing 'add water' but the tank is totally full, what gives?
- i just plugged it in and the compressor isn't running, no sound at all.
- the temperature inside feels way colder than what the dial is set to.
- water is pooling at the bottom of my beverage refrigerator.
- my fridge is making a loud gurgling or buzzing noise, is that normal?
- the interior light on my homelabs cooler won't turn on when i open the door.
- how do i stop condensation from building up inside the glass door?
- why is my beverage cooler running constantly and not getting cold enough?
- my homelabs beverage fridge just keeps beeping and won't stop, what do i do?
- the 165hz refresh rate option is greyed out in windows, it only shows 100hz max over hdmi
- how do i clean the screen on this thing? the manual says to not use anything and i'm scared to damage the coating
- i keep getting 'displayport no signal' or it randomly goes black for a second on my odyssey g5
- the stand wobbles way too much on my desk, just typing makes the screen shake, is this normal?
- my odyssey g5 makes a constant high-pitched buzzing or coil whine noise from the back, it's really annoying
- the screen on my g5 is washed out and colors look terrible, no matter what hdmi cable or computer i use
- i'm getting a weird flickering or screen flashing on my odyssey g5, especially in games or with g-sync enabled
- my samsung odyssey g5 34 inch monitor won't turn on, the power button just flashes and nothing comes on the screen
- i connected my macbook pro via usb-c, but the monitor isn't charging my laptop and the usb hub on the monitor doesn't work.
- the quickfit (red grid overlay) function on my monitor is stuck on and i can't get it to turn off no matter what button i press.
- the displayport connection on my proart keeps randomly flickering to black for a second, especially when i have a video playing.
- how do i properly clean the matte screen on this asus proart? i'm worried about damaging the anti-glare coating.
- the joystick control on the back of my pa278qv is super unresponsive, have to push really hard or at a weird angle for it to register.
- my proart monitor makes a faint but constant high-pitched buzzing or whining noise, seems to come from the top left back.
- the colors on my proart look washed out and weird compared to my old monitor, especially the reds. i calibrated it but it still looks off.
- my asus proart pa278qv monitor just shows no signal from both my laptop and desktop, i've tried both hdmi and displayport.
- my washer stopped mid cycle and now the display is blank, no lights, completely dead.
- the washer is shaking violently and moving across the floor during the spin, even with balanced loads.
- how do i run a clean cycle on this ge washer? i don't see a specific button for it.
- it won't go into spin cycle, just keeps agitating forever and the clothes are sopping wet.
- the washer fills super slow, like it takes 20 minutes just to get enough water to start agitating.
- water is leaking from the bottom front of my ge gtw465 washer, right under the door area.
- washer is making a loud grinding noise only on the agitate part of the cycle, spin is fine.
- my ge top load washer gtw465asnww just keeps saying 'unb' and won't start a cycle, what does that mean?
- the chain brake won't engage when i push the handle forward, it just feels loose.
- saw vibrates like crazy, way more than it used to. makes my hands numb fast.
- it's throwing oil everywhere but not onto the bar and chain. just spraying out the bottom near the clutch.
- chain gets really loose after just a few cuts, i have to tighten it constantly. tension screw is tight.
- my 120 mark ii is leaking bar oil all over my garage floor even when it's just sitting.
- saw runs okay but the chain won't move, it's just stuck. the bar isn't pinched.
- chainsaw starts but dies as soon as i give it throttle or take it off choke. runs for like 5 seconds.
- my new husqvarna 120 mark ii won't start at all, not even a sputter. it's full of gas and oil.
- it's smoking a lot more than it used to, really thick blue smoke even after it's warmed up.
- my chainsaw is vibrating really badly, way more than it used to, makes my hands numb fast.
- the chain brake on my 455 feels really stiff and is hard to engage by hand, sometimes it doesn't snap back off.
- it starts and runs for about 30 seconds then just shuts off like i hit the switch, and won't restart until it's cold again.
- the chain stops moving while i'm cutting even though the engine is still running at full throttle.
- my 455 rancher is leaking bar oil all over my garage floor even when it's just sitting there not running.
- chainsaw starts and idles but immediately dies when i give it throttle. acts like it's being choked.
- my husqvarna 455 rancher ran fine last season, now it won't start at all, not even a pop. pull cord feels normal.
- my berkey lower chamber is getting a pink or slimy film on the inside walls, what is this and how do i clean and prevent it?
- the water level in my berkey upper chamber isn't going down even after a day, seems completely clogged, what do i do?
- black flecks or specks are coming out of my berkey spigot into my glass, what are they and how do i fix it?
- my berkey royal's water tastes weird or like plastic after the first setup, is the water safe to drink?
- the wingnuts on top of my berkey keep coming loose after i tighten them, causing the upper chamber to wobble, how do i secure them?
- white stuff is building up on the bottom of my black berkey filters, looks like scale or powder, what is it and do i need to clean it?
- just primed my new black berkey filters but the water is barely dripping through, takes hours to get a gallon, is this normal?
- my berkey royal water filter is leaking from the bottom of the spigot where it screws into the lower chamber, how do i stop it?
- i can't get it to start in cold weather, maybe 40 degrees F, even with the choke.
- the eco mode switch doesn't seem to do anything, engine rpm sounds the same.
- it starts and runs but surges up and down constantly, won't hold a steady speed.
- how do i clean the air filter on this thing? it's looking pretty dirty.
- the green ready light comes on but i get no power output from the outlets.
- my wen inverter is making a loud, rhythmic knocking or tapping noise when it runs.
- generator starts but shuts off after a few seconds, like it's starving for fuel.
- my wen 56203i won't start at all, no lights, nothing when i pull the cord.
- the digital display is blank or flickering, but the generator itself is running and producing power
- switching from gasoline to propane, it starts on gas fine but won't fire up on propane
- parallel kit won't sync with my other champion inverter, the lights just blink and it doesn't combine power
- the wireless remote start key fob isn't working, generator won't respond to it
- it's making a loud knocking or tapping noise that wasn't there before, sounds bad
- getting a 1204 error code on the display, what does that mean for my champion 3400 inverter?
- generator starts but then shuts off after a few seconds, sometimes it shows an error code like 1101
- my champion 3400 inverter generator won't start at all, it's just dead silent when i pull the cord
- the touch controls on my ap-1512hh are not responding. sometimes they work if i press really hard.
- my air purifier smells weird, like burning plastic or ozone, especially when first turned on.
- the ionizer light won't turn on when i press the button. is the feature broken?
- why does my airmega keep switching to fan speed 1 by itself? i'll set it to 3 and it goes back down.
- i replaced the filters but the replacement filter light won't turn off on my coway mighty.
- the air purifier is making a loud rattling or buzzing noise, mostly on the higher fan speeds.
- my ap-1512hh just beeps three times and won't turn on. no lights come on at all.
- my coway airmega mighty's light is just stuck on red all the time, even in a clean room. is the sensor broken?
- where is the circuit breaker on the mj401e? i see a red button but pressing it does nothing.
- i just assembled it and the safety lever feels stuck, won't press down to start.
- the mower seems underpowered and bogs down in normal grass.
- the handle on my sun joe 14 inch mower is wobbly and won't stay tight.
- how do i clean under the deck on this thing? grass is caked on solid.
- my mower makes a loud grinding or screeching noise when it runs.
- the blade on my mj401e spins but it's not cutting evenly, just tearing the grass.
- my sun joe mj401e mower just stopped working mid-job and now won't turn on at all.
- cooling keeps short cycling, turns on for like 3 minutes then off for 2, over and over. it never reaches the set temp
- it won't install with the app, i get to the wifi step and it just spins forever then says setup failed
- how do i get it to stop changing the temperature on its own? i don't want any smart schedules or eco modes
- the temperature reading is way off, it says 72 but my room feels like 65 and my other thermometer agrees
- i keep getting disconnected from wifi on the thermostat and have to keep reconnecting it in the app
- why is my thermostat making a constant faint buzzing or humming noise? it's coming from the wall plate
- thermostat says "no power to heat pump" and my heat won't kick on, but the ac worked fine last summer
- my amazon smart thermostat screen is just black and won't turn on at all after i installed it
- my ninja twisti duo is really hard to twist and unlock, i feel like i'm going to break the handle.
- the twisti blender stopped in the middle of a cycle and now the power light just flashes red.
- i can't get the single serve cup to lock onto my ninja twisti blender base, it just wobbles.
- how do i clean the twisti spout lid? stuff gets stuck in the rubber flap and it's gross.
- the motor on my ninja twisti sounds really loud and strained, like a grinding noise, only on the smoothie setting.
- my twisti duo blender is leaking from the bottom of the pitcher when i blend anything liquidy.
- the blending blade on my twisti duo just spins freely and won't lock into the pitcher, is it broken?
- my ninja twisti duo blender won't turn on at all, no lights or anything. what should i check?
- the keep warm function on my duo nova seems too hot and burns the bottom of my food.
- water keeps leaking from the steam release valve during cooking, even though it's set to sealing.
- i get the C6 or C7 error when trying to make yogurt in my duo nova. what does that mean?
- my instant pot won't turn on at all, no lights, nothing. it's plugged into a working outlet.
- the sealing ring on my duo nova smells terrible, like old food, no matter how much i wash it.
- why is my instant pot so loud when it's coming up to pressure? sounds like a hard boil.
- instant pot duo nova keeps blinking '6' or 'L6' and won't do anything when i press a button
- my instant pot duo nova just says 'burn' and won't start pressurizing, what am i doing wrong?
- dust and chips keep getting blown back right into my face from the front of the tool, didn't used to do this
- the variable speed trigger doesn't work right, it's either full power or nothing, no in-between control
- my saw just suddenly stopped in the middle of a cut, now it smells like burnt electronics
- the tool vibrates way more than it used to, feels really harsh in my hands even with a new blade
- the shoe on my reciprocating saw wobbles side to side a lot, makes cutting straight impossible
- the blade clamp on my fuel sawzall is stuck and i can't get the blade out, the lever moves but nothing releases
- my 2821-20 makes a really loud grinding or rattling noise when i'm not even cutting, just holding the trigger
- my m18 fuel sawzall won't turn on at all, battery is charged and clicks in fine, nothing happens when i pull the trigger
- just got this drill and the chuck wobbles a little bit, is it defective?
- trigger feels sticky and sometimes the drill keeps running after i let go.
- my drill gets super hot really fast, even just drilling wood, is that normal?
- the mode selector ring is stuck and i can't switch from drill to hammer.
- how do i clean out all the concrete dust from inside my hammer drill after core drilling?
- drill seems weak, bogs down way easier than it used to with a fresh battery.
- hammer drill light is flashing red and green, what does that mean?
- my m18 fuel hammer drill just makes a clicking noise and won’t spin, battery is fully charged.
- after a power outage, my raxe500 only shows a blinking white ring and won't fully boot.
- the nighthawk app says 'router offline' but the router has a solid white light and my wifi works.
- my upload speeds are terrible on the raxe500 even though download is fine, tested wired and wireless.
- how do i get my raxe500 to work with my xfinity xfi modem in bridge mode? it just won't connect.
- the router fan is constantly running loud, sounds like a jet engine. is this normal?
- i get an 'invalid firmware' error when trying to update my raxe500 through the app.
- why does my raxe500 keep dropping the 6ghz wifi band? my new devices can't see it.
- my nighthawk raxe500 router shows a solid white ring but i have no internet, what gives?
- can't find the guest network option on my nest wifi pro in the google home app
- speed tests are way slower than my gigabit internet, especially on the wifi pro points
- getting a 'something went wrong' error in the google home app when trying to set up from scratch
- nest wifi pro is making a faint high-pitched buzzing or coil whine noise, is that normal?
- my device says it's connected to nest wifi pro but i have no internet, other devices work fine
- nest wifi pro 6e keeps dropping the 5ghz band, all my devices get kicked to the slower 2.4
- my nest wifi pro router is solid yellow and the app says it's offline, power cycling doesn't fix it
- my phone and laptop can't find the tr8620a for airprint anymore, it just disappeared from the network.
- prints from my canon all-in-one have weird colored lines and streaks all over them, just started.
- the touchscreen on my tr8620a is totally unresponsive, buttons don't work, it's just frozen.
- my printer says 'ink absorber full' with an error 5B00, can i fix this or is it dead?
- the scanner on my pixma tr8620a makes a loud grinding noise when it tries to scan, sounds bad.
- trying to connect my tr8620a to wifi, it keeps failing during setup and i have to start over.
- canon pixma tr8620a says 'no paper' even though the tray is totally full, it just won't pick it up.
- my tr8620a just shows 'error 6000' on the screen and won't print anything, what is this?
- printer turns on but the touchscreen is completely blank, no lights, nothing.
- getting 'error 0xc19a0013' when trying to install the software on windows.
- scans come out with black streaks or lines down the page every time.
- replaced all the toners but it still says 'toner cartridge problem' and won't print.
- wireless keeps dropping on my hp m227, have to reboot it to get it back online.
- printer makes a loud grinding noise from the back every time it prints or copies.
- just got a used m227fdw and it says 'supply memory error' on the screen, can't do anything.
- my m227fdw keeps saying 'scanning document jam' but there's no paper stuck anywhere, what do i do?
- the preset buttons (fries, frozen, etc.) on my cosori lite don’t match the times i need, can i adjust them?
- how do i clean the heating element inside my cosori lite? it’s starting to smoke from old grease
- food at the bottom of the basket is burning but the top isn’t cooked, what am i doing wrong?
- the nonstick coating on my basket is chipping off after a few months, can i still use it?
- my air fryer is making a loud clicking noise every few seconds while it’s running, is that normal?
- the display on my cosori 3.8qt lite just shows ‘e1’ and won’t do anything, how do i fix this?
- why does my cosori lite smell like burning plastic the first few times i use it? is it safe?
- my cosori air fryer lite just beeps three times and won’t start, the display is lit up fine, what’s wrong?
- food in the bottom basket always burns while the top basket is undercooked, even with the same settings.
- the sync function isn't working, i press it but the times for basket 1 and 2 stay different.
- how do you clean the inside of this thing? grease is splattered everywhere above the baskets and it's smoky.
- the digital display on my ninja foodi xl is completely blank, but the unit is plugged in.
- my foodi makes a loud humming or buzzing noise that's not the fan, it comes from the back.
- i just got this and tried to use both baskets but only one side seems to heat up and cook.
- the air fryer baskets on my foodi xl are ridiculously hard to slide in and out, they feel like they're grinding.
- my ninja foodi xl air fryer just shows "ER1" on the screen and won't start, what does that mean?
- robot won't recharge properly, it docks but the screen says 'charging error' and the battery stays low.
- the main brush keeps getting tangled with hair and stops spinning every few days.
- after washing, the mop pads still smell musty and aren't getting clean.
- robot keeps losing wifi connection to the app, have to reboot it constantly.
- my s8 pro ultra's mop isn't putting down any water, the pad is just dry.
- the auto-empty dock sounds like it's grinding and doesn't suck all the dust out of the robot bin.
- the robot keeps getting stuck saying "cliff sensor error" on perfectly flat floors, how do i fix this?
- my roborock s8 pro ultra just beeps at me from the dock and won't start cleaning, what's the beeping for?
- the power cord won’t rewind all the way back into the vacuum, it just sticks out a few feet.
- the vacuum head leaves behind a line of debris in the middle of the carpet as i push it.
- suction feels really weak even after i empty the bin and clean the filter.
- i can’t get the handheld part to detach from the main vacuum body.
- the vacuum turns on for a second then shuts off, like it’s losing power completely.
- my shark vertex is making a high pitched whistling or screeching noise from the head.
- the brushroll on my vertex just stopped spinning on carpet, works fine on hard floors though.
- my shark vertex duo just keeps flashing a red light and won’t start, what’s that about?
- my coffee tastes weak from both sides of the machine lately, even on the strongest setting. it’s not the coffee i’m using.
- when i try to brew a full carafe, the flexbrew trio just beeps three times and doesn’t start. what’s wrong?
- the clock on my hamilton beach coffee maker resets to 12:00 every time i unplug it, even for a second. do i need a new battery?
- how do i clean the water reservoir on the flexbrew trio? it’s got this pinkish slime in the corners i can’t scrub out.
- the warming plate for the carafe on my 49902 gets way too hot and burns the coffee, is there a way to adjust the temp?
- my coffee maker won’t turn on at all, no lights, no display, nothing. i’ve checked the outlet and it’s fine.
- the single-serve side of my hamilton beach flexbrew trio is just dripping really slowly, like it’s clogged, but the carafe side works fine.
- my flexbrew trio just shows three flashing dashes on the screen and won’t let me do anything, what does that mean?
- the light just blinks red three times and then goes off, no other response.
- water is leaking from the bottom of the machine onto my counter, not from the drip tray.
- it brews a full cup even when i put an espresso pod in, all my drinks are the same size.
- the lever to open the machine is stuck shut, can't eject the old pod.
- coffee is coming out really weak and watery, even on the smallest cup setting.
- machine says it's connected in the app but i can't update the firmware, it just fails.
- vertuo next making a really loud grinding noise when it spins the pod, sounds terrible.
- my vertuo next just blinks orange twice and then green, won't brew anything.
- my dyson tp04 filter light is on, how do i change the hepa filter?
- dyson pure cool tp04 remote control not working, buttons do nothing
- dirty tank on my bissell crosswave won't click into place, just wobbles
- the lift away feature isn't working, the pod won't release from the floor nozzle when i press the button.
- the vacuum tip keeps falling over when i'm using the hose and tools, it won't stand up by itself.
- how do i clean the damn filter? i took it out and it's this blue foam thing and a felt piece.
- the suction feels really weak even with a brand new filter, what's going on?
- there's a high pitched whining noise coming from the vacuum head, not the main motor.
- i can't get the wand to detach from the floor nozzle, the release button is stuck or something.
- the vacuum turns on for a second then shuts off with a red light blinking on the handle, what does that mean?
- my shark duo clean just stopped picking up stuff on my carpet, it's like the brush roll isn't even spinning.
- the battery on my v15 dies super fast now, like 5 minutes in auto mode, is it already dead?
- my v15 isn’t picking up anything, the suction feels weak even with a clean filter and empty bin
- how do i get the hair out of the brush roll on the laser head, it’s really stuck in there
- the lcd screen on my v15 is just blank, no particle count or runtime info, but the vacuum works
- dyson v15 shuts off after 10 seconds on max mode, the battery bars disappear and it won’t respond
- the laser on my detect won’t turn on anymore, the vacuum works but the green light is out
- dyson v15 making a high pitched whining noise that’s really loud, it’s not the brush roll
- my dyson v15 just shows a solid red light on the battery and won’t turn on at all, even after charging all night
- the usb 3.0 port on my r7000 keeps disconnecting my external hard drive every few minutes.
- devices connected to wifi have full bars but internet speed is super slow, especially on the 5ghz band.
- getting a 'the firmware is not compatible with your hardware' error when trying to update my router.
- my nighthawk r7000 is making a constant high-pitched electrical whining or buzzing noise.
- i can't access routerlogin.net or 192.168.1.1 to get into my r7000 settings anymore.
- the 5ghz wifi on my ac1900 nighthawk just disappeared, only 2.4ghz shows up now.
- internet keeps dropping on my nighthawk r7000, have to reboot it multiple times a day.
- my netgear nighthawk r7000 router just has a solid amber power light and the internet light is off, nothing works.
- the wireless connection drops constantly, have to power cycle the printer to get it back.
- every print has a faint repeated smudge or ghost image down the page.
- getting 'toner low' message but prints are still fine, can i keep using it?
- trying to connect it to wifi but it just won't find my network during setup.
- keeps saying 'paper jam' but there's no paper stuck anywhere i can see.
- it's making a loud grinding or squealing noise when it prints, sounds awful.
- printer says 'drum error' and won't print. the drum unit doesn't look that old.
- duo won’t turn on at all, no lights on the display, tried different outlets.
- the stainless steel inner pot has rainbow-colored stains, can’t scrub them off.
- my instant pot makes a loud humming or buzzing noise when it’s on, sounds like a transformer.
- the keep warm light is blinking on my duo after cooking, is that normal?
- why is my instant pot duo beeping loudly three times and the display says ‘Lid’?
- getting a ‘C6’ or ‘C6H’ error on my 6qt duo, it just beeps and won’t start.
- instant pot duo won’t seal, steam just keeps coming out the valve the whole time.
- my instant pot duo just keeps flashing ‘burn’ and won’t pressurize, food stuck to bottom.
- i just descaled my k-express and now it tastes like vinegar, how do i get rid of the taste?
- the display on my k-express says 'add water' but the tank is totally full
- coffee grounds are getting into my cup from my keurig k-express
- my k-express is making a loud gurgling or screeching noise when it heats up
- the brew button on my k-express doesn't light up or respond when i press it, machine has power
- my k-express coffee is lukewarm, not hot, even on the strongest brew setting
- water just dribbles out of my k-express instead of a steady stream, it takes forever to fill a cup
- my new keurig k-express just blinks the orange light and won't brew anything, what do i do?
- chefman 6 quart air fryer sync finish mode isn't working, one side just says HOLD forever.
- my chefman dual basket air fryer is showing E1 on the screen and won't start, what's wrong?
- can I use my metal baking pan or a glass dish inside the ninja crispi pro air fryer?
- why does my ninja air fryer keep shutting off halfway through cooking? it just beeps and stops
- my cuisinart oven's toast keeps coming out uneven, one side dark one side pale
- cuisinart air fryer oven making a loud rattling noise when the fan is on, is something loose?
- how do i clean the main body of my ninja dualzone air fryer? can i wipe it down?
- my ninja foodi dual zone air fryer is making a loud clicking noise from the control panel, is it broken?
- fries in my chefman air fryer are coming out soggy, not crispy
- my chefman mini air fryer just shows E1 on the display, what does that mean?
- my coffee from the hamilton beach frontfill tastes terrible no matter what beans i use. help?
- can i use my hamilton beach coffee maker with a paper filter? the basket seems weirdly shaped.
- moved my keurig to a new apartment and now it won't brew, just flashes lights. what do i do?
- my keurig supreme is making a weird gurgling sound and barely any coffee comes out
- can I install my APEC RO system in my garage? it gets cold in winter.
- my APEC reverse osmosis system just stopped making water completely. the tank is empty. help?
- the filter light on my brita pitcher is blinking green after i fill it, is that good or bad?
- can i use my stihl ms 250 in the winter? it was like 20 degrees out and it kept stalling
- going on vacation, do i need to do anything with my apec reverse osmosis system?
- apec roes-50 water output is super slow, barely a trickle. filters are new.
- my husqvarna 460 rancher is making a loud knocking or rattling noise from the engine area, not the chain. should i be worried?
- red light is on my apec ro faucet. what does that mean?
- apec roes-50 won't shut off, keeps running and dumping water down the drain. help?
- can i mount my lg 27ul500-w on a monitor arm? it says vesa but i can't find the specs.
- replacing the chain on my ego cs1800e, which way does it go on? the manual is confusing.
- dell display manager on my u2722d isn't saving my window positions when i unplug my laptop.
- dell display manager won't control my second u2722d monitor when they're daisy-chained, what's wrong?
- kitchenaid k400 won't turn on at all, power light is dead. checked the outlet.
- what's the right way to clean the vitamix e310 blender base? i don't want to break it.
- the colors on my LG 27UL500 look weird and washed out, how do i fix this?
- can my honeywell hpa300 handle smoke from cooking in a large kitchen?
- dell ultrasharp u2722d monitor stuck on 'no input signal' with a flashing white light
- kitchenaid k400 blender lid is stuck and the teeth look weird, how do i fix it?
- how do i clean the outside of my honeywell hpa300? can i use a wet cloth or cleaner?
- how often do i really need to change the filters in my honeywell hpa300? the manual is confusing.
- can i use ethanol gas in my honda eu2200i or will it mess it up? the manual is confusing.
- honda eu2200i just stopped running and a red light is flashing. what does that mean?
- my dell u2722d monitor keeps changing brightness by itself, how do i stop it?
- dell display manager icon is stuck in my system tray and won't open, what's wrong with my dell u2722d?
- i'm camping above 8000 feet and my wen generator is losing power and running rough. help?
- is it safe to plug my laptop and phone into my wen inverter generator? i'm worried about frying them.
- my greenworks electric pressure washer keeps shutting off by itself after a few minutes of use
- can i use bleach or vinegar in my greenworks gpw1804 pressure washer to clean my patio?
- can i blend hot soup in my kitchenaid k400 or will it break?
- my APEC ROES-50 is barely trickling water, takes forever to fill a glass. what's wrong?
- can i hook up my older honda eu2000i to my new eu2200i to get more power?
- can i connect my honda eu2200i to my house's electrical panel for backup power?
- how do i reset the filter light on my brita everyday pitcher?
- can i use an extension cord with my sun joe 2030 psi pressure washer? the one i have keeps tripping it.
- honeywell hpa300 air flow seems really weak even on high, what's wrong?
- how often do i need to change the filter on my honeywell hpa300?
- why is my sun joe spx3000 pulsating and surging instead of having steady pressure?
- why is my spx3000 pulsating and the pressure is all jumpy?
- the eco mode light on my wen generator is blinking and it's running rough. what does that mean?
- where is the best place to put my ecobee smart sensors for the most accurate reading?
- my ecobee thermostat is reading a different temperature than my thermometer, how do i fix this?
- stihl ms 250 runs fine then suddenly bogs down and dies in cold weather, like below freezing.
- stihl ms 250 chain won't stop spinning when the engine is at idle, is this dangerous?
- can i hook up my honda eu2200i to another brand of generator to get more power?
- honda eu2200i oil alert light came on and it died, now what?
- where's the best place to put the ecobee smart sensors? i put one in my living room and it doesn't seem to notice when i'm home.
- ecobee premium temperature is wrong, it says 72 but my room feels way colder. how do i fix the sensor reading?
- honeywell t9 thermostat won't let me set the cool temperature below 50 degrees. is that right?
- how do i clean the air filter on my husqvarna 455 rancher? it's running rough and i think it's clogged.
- how do i get the soap/detergent out of my greenworks pressure washer? it's just spraying water now.
- my honeywell t9 keeps saying temperature setting not allowed, can't set it below 70
- can i use simple green or bleach in my greenworks 1800 psi pressure washer?
- what oil do i use in my honda hrn216vka mower? manual is confusing.
- honda hrn216vka lawn mower leaking gas when i tilt it to check the blade, is this normal?
- dell u2722d monitor's dell display manager won't control brightness on my second daisy-chained monitor, only the first one. why?
- my dell u2722d monitor won't apply the right color preset when i open photoshop, even though i set it up in dell display manager. auto mode is on.
- my honda mower is shaking a lot more than usual and making a weird vibration noise. should i be worried?
- my ecobee premium's automatic ventilation keeps turning on for no reason, how do i control it?
- how do i clean my vitamix e310 blender properly? i'm worried about the sharp blades.
- greenworks mower battery flashes red when i try to charge it, won't charge. what does that mean?
- my old thermostat had a jumper between rc and rh, what do i do with it for the honeywell t9?
- honeywell hpa300 indicator light is blinking, what does that mean?
- the grass catcher on my lm2135sp won't stay on, keeps falling off
- self-propel on my ego lm2135sp is weak or intermittent, feels like it's dragging
- where is the serial number on a greenworks 40v 21 inch mower? need it for warranty.
- my ego lawn mower is leaving uneven strips of uncut grass, what should i check?
- ego self-propelled mower making a loud grinding noise when i engage the drive, what's broken?
- the red fault light on my honda eu2200i is flashing once every two seconds. what does that mean?
- makita circular saw battery gets really hot when i'm using it, is that normal or a problem?
- my honda eu2200i generator just shut off by itself and a red light is flashing. what does this mean?
- the lower guard on my makita circular saw is sticking and not closing fast. is this safe to use?
- ego self-propelled mower making a grinding noise from the wheels, sounds awful. is the drive broken?
- makita lxt saw making a grinding noise and cutting really slow, blade seems tight.
- ryobi p215k1 drill just stopped in the middle of a job and won't restart, no lights or anything.
- how do i check the charge on my ryobi p215k1 drill battery? there's no display on the drill.
- my ryobi drill is making a weird clicking noise and won't spin
- my ryobi one+ drill is making a high-pitched whining noise when i pull the trigger, is it broken?
- my milwaukee m18 drill driver won't go into reverse, the switch is stuck.
- milwaukee m18 battery won't charge on my rapid charger, the lights just blink.
- i bought a milwaukee m18 drill secondhand, is the warranty transferable?
- my ecobee premium keeps pausing my ac because it thinks a window is open, but all windows are closed. what gives?
- how long is the warranty on my milwaukee m18 2801 drill? i lost the paperwork.
- what's the biggest hole i can drill in wood with my makita xfd131?
- the battery on my makita lxt drill dies super fast, like in 10 minutes, is the battery bad?
- makita xfd131 drill making a weird clicking noise when i pull the trigger, not drilling. battery's charged.
- how do i know if my old system is compatible with the honeywell t9 before i buy it?
- installing my honeywell t9 and the manual says i need a c-wire but i don't see one, now what?
- can i use a bigger battery, like from another brand, on my dewalt dcd771 drill if it fits?
- can i use my dewalt 20v max charger with an extension cord in my garage?
- how do i clean my dewalt cordless drill? it's full of sawdust
- dewalt 20v battery won't charge, red light just blinks once and stops on my charger
- where is the filter on the dyson ball animal 2 and how often do i wash it?
- dyson ball animal 2 brush bar not spinning on carpet
- dyson ball animal 2 keeps shutting off by itself while i'm vacuuming, is this a known issue?
- my shark nv356e brush roll isn't spinning on my carpet. it works on hard floors though. what gives?
- the lift-away pod on my shark navigator feels really loose and wobbly on the upright handle, is it supposed to be like that?
- the brush roll on my shark navigator lift away pro keeps stopping on medium pile carpet. is this normal?
- my ego mower's grass bag won't attach properly, it keeps falling off.
- how often do i need to replace the filters on my shark navigator lift away nv356e? it seems like a lot.
- how often do i actually need to wash the filters on my shark navigator lift-away? i keep forgetting.
- how do you take apart the dyson v8 to clean the inside? the manual isn't clear.
- dyson v8 battery died and won't charge, light isn't doing anything. is it broken?
- the orange light is flashing on my dyson v8, what's that?
- dyson v8 absolute keeps shutting off after a few seconds, battery light flashes. how do i fix this?
- does the ryobi p215k1 have a warranty if i bought it in the EU? how do i make sure it's covered?
- just got a ryobi one+ p215k1 drill, how do i know when the battery is actually charged and not just pretending?
- dyson v15 laser on the fluffy head won't turn on
- can i change the wifi channel on my linksys velop mx5300?
- what's the max drill size for metal with the makita xfd131? manual is confusing
- how do i install the hook on my makita cordless drill? it didn't come with instructions
- what's the right way to store my dewalt cordless drill batteries so they don't die or cause a fire?
- my dewalt battery charger light is blinking red, what does that mean?
- my netgear orbi rbk752 won't connect to the internet after setup, what gives?
- orbi router internet port light not on, is the cable broken or is it the port?
- orbi router's power led is off, device won't turn on at all
- how do i set up a dmz on my netgear orbi for gaming? my nat type is strict.
- how do i set up ipv6 on my netgear orbi rbk752? my isp supports it but it's not working.
- the lights on my asus rt-ax86u are super bright at night, is there a way to turn them off?
- asus rt-ax86u keeps dropping my wifi signal, it's really unstable. how do i fix this?
- shark navigator lift away vacuum hose keeps detaching from the canister part, it won't stay locked
- asus rt-ax86u internet light is red/orange, no connection. modem works fine directly to my pc.
- can i use generic cleaning sheets for my canon mg3620 paper feed roller?
- my canon pixma mg3620 is printing with faded colors and missing lines, how do i fix this?
- where's the wps button on the asus rt-ax86u? i can't find it to connect my printer.
- can i use the asus rt-ax86u with a dsl modem? i have at&t u-verse.
- my linksys velop's light is solid purple, i can't get it to connect during setup.
- how do i factory reset my linksys velop? the app isn't working.
- my hp m234dwe printer says 'cartridge problem' and won't print at all. using third-party toner.
- want to disable dhcp on my orbi rbk752, how do i do that?
- how do i clean the print head on my canon pixma mg3620 from my windows computer?
- why is my hp laserjet pro m234dwe printing really faint or with streaks?
- can i use my deco x20 as just a wifi extender for my existing router?
- tp-link deco app says i can't use parental controls or qos, why are they grayed out?
- my epson wf-2860 won't connect to wifi without the router, can i connect it directly to my laptop?
- my epson wf-2860 won't print without borders on photos, what am i doing wrong?
- my hp laserjet pro mfp m234dwe is smearing toner all over the pages
- is the canon tr8620a power hungry? it feels warm even when I'm not using it.
- how do i change the default print settings for my epson wf-2860 on windows so i don't have to change it every time?
- trying to hook up my brother hl-l2350dw to a windows server 2019 machine. will it work?
- how do i clean the scanner glass on my canon mg3620 all-in-one?
- my brother hl-l2350dw printer won't connect to wifi, keeps saying network error. how do i fix this?
- my canon pixma tr8620a is really slow printing color pages, like way slower than my old printer. is this broken?
- how do i connect my brother hl-l2350dw to wifi without using the wps button?
- how do i print double sided on my brother hl-l2350dw? it's not working from my mac.
- hp officejet pro 9015e blue wifi light is solid, not blinking, what does that mean?
- can i use my hp laserjet m234dwe printer with a vpn turned on? it keeps dropping off the network.
- hp laserjet m234dwe says it's connected to wifi but my computer can't find it to print. what's the fix?
- fax on my canon pixma tr8620a not working, just get a constant busy signal.
- can i print legal size paper on my canon pixma tr8620a? the manual is gone.
- how long does the ink last in an epson ecotank et-2800? i print like once a month.
- what kind of paper can i actually use in the epson ecotank et-2800?
- can i wash my philips air fryer basket and pan in the dishwasher?
- my philips essential air fryer xl won't turn on at all, what's wrong?
- trying to set up fax on my epson workforce wf-2860 and it's not picking up, my answering machine grabs it first.
- the copy function on my epson et-2800 is producing really dark, smudgy copies. how do i adjust it?
- my epson et-2800 is printing really blurry photos, especially on glossy paper. how do i fix this?
- cosori turboblaze making a plastic smell, is it safe to use?
- how do i adjust the time for just one side of my ninja dualzone air fryer while it's cooking?
- the fan in my ninja foodi dualzone air fryer blows my sandwich apart. how do i stop that?
- how do i get alexa to tell me when my canon pixma tr8620a is low on ink? i set it up but it's not talking to me.
- can i print legal size documents on my canon pixma tr8620a? i need to print some contracts.
- my philips air fryer is showing e1 on the screen, what does that mean?
- my philips air fryer is smoking white smoke, is it going to catch fire?
- where is the network settings menu on the hp officejet pro 9015e screen? i can't find it to reset my wifi.
- cosori turboblaze display shows error code E01. what does that mean?
- the match cook button on my ninja foodi isn't working, what am i doing wrong?
- how do i use the smart finish feature on my ninja foodi dualzone?
- my ninja foodi 6.5 quart won't start, it just shows 'SHUT' on the control panel. help?
- my ninja foodi pressure cooker is showing a 'VENT' error on the display, what do i do?
- ninja foodi dualzone air fryer keeps showing 'Hold' on one side and won't start cooking, what am i doing wrong?
- what's the right way to store the braava jet m6 if i'm not using it for a few months?
- i want to cook fries in one side and chicken in the other but have them finish together. how do i do that on the ninja dualzone?
- cosori pro LE basket won't slide in all the way, it feels blocked.
- my ninja foodi dualzone keeps shutting off before the timer is done, why?
- why is my cosori pro LE air fryer showing an E3 error code?
- braava jet m6 light ring is pulsing while it's on the charger, is it charging?
- how long should my eufy 11s vacuum run before it dies? mine only goes for like 30 minutes.
- cosori L501 display shows E1 error code, how do i fix it?
- eufy 11s just beeps once continuously, red light is solid, what does that mean?
- how do i schedule a cleaning with my eufy robovac 11s? followed the manual but it's not working
- the washable pad for my braava m6 is really dirty, can i just throw it in the washing machine?
- how do i get my roomba i3+ evo to stop trying to go down the stairs? it keeps bumping the edge.
- how do i clean the filters on my eufy 11s? can i just rinse them under the tap?
- how do i properly clean the washable pads for the braava jet m6? can i just throw them in the dryer?
- trying to set a schedule on my robovac 11s but it's not working, the clock icon just blinks
- my roomba i3+ evo's suction seems really weak all of a sudden, it's not picking anything up.
- roomba i3+ evo won't charge on the home base, the light ring is red and pulsing. i've tried repositioning it.
- can i use preground coffee in my delonghi magnifica s automatic machine? beans are expensive.
- my delonghi magnifica s ecam22110sb is making coffee but it's lukewarm, not hot. what's wrong?
- how do i clean the sliding lid on my ninja dualbrew pro? it's got coffee gunk stuck in it.
- can i use pre-ground coffee in my delonghi automatic espresso machine?
- my delonghi magnifica s espresso machine keeps flashing the 'empty grounds container' light even though i just emptied it, what gives?
- why is my ninja dualbrew pro not detecting the pod adapter? it just shows the hot water options.
- how do I clean the ninja pod adapter for the dualbrew pro? it has old coffee gunk in it.
- why is my ninja dualbrew pro over ice brew not cold? it's just making lukewarm coffee.
- the coffee from my bvmc-zh1b tastes weak and watery no matter how much grounds i use
- the "clean" light on my mr coffee bvmc-zh1b is blinking and won't turn off, how do i run the cleaning cycle?
- mr coffee bvmc-zh1b making a weird gurgling noise after brewing finishes, sounds like it's sucking air
- how do i clean the grinder on my breville barista express? it's getting sluggish.
- mr coffee bvmc-zh1b is leaking water all over my counter from the bottom, help?
- how do i clean the inside of my mr coffee bvmc zh1b? it's starting to smell funky.
- how do i store my keurig classic coffee maker if i'm not using it for a few months?
- keurig classic only brews a tiny bit of coffee then stops, like a partial cup
- keurig k-classic brewing a tiny amount of coffee then stops, just a dribble. how do i fix this?
- can i use my mr coffee programmable to just heat up water for tea or something?
- is it safe to put the ceramic basket from my ninja air fryer in the dishwasher?
- how do i clean the heating element on my ninja air fryer? it's got gunk on it
- roomba 694 battery dies super fast, only runs for like 10 minutes. is the battery bad?
- roomba 694 won't connect to wifi, the indicator just blinks. how do i fix it?
- my new keurig k-mini isn't brewing on the first try. water just heats up and light pulses but nothing comes out.
- keurig k-mini brewing a tiny amount of coffee or just a few drops. help?
- can i use my t-fal clipso pressure cooker on an induction stove? i'm moving and my new place has induction.
- can i take the carafe off my elite gourmet to pour a cup while it's still brewing?
- mr coffee bvmc zh1b 12 cup coffee maker, can i just make one cup?
- hamilton beach stay or go 45237 automatic shutoff - how long until it turns off?
- can i use my elite gourmet coffee maker outside on my patio?
- just got a bella dots coffee maker and can't figure out how to set the clock, anyone know?
- my mr coffee mini brew coffeemaker is making a loud noise and not brewing right. what do i check?
- how do i properly take apart and store my kefeya g2 screen extender?
- 3-in-1 pressure cooker showing E3 error code, what does that mean?
- the stand for my amazon basics monitor feels wobbly, did i put it together wrong?
- the colors on my sansui fhd monitor look totally washed out and weird, how do i reset it?
- my dell s2425hsm screen image is too small and doesn't fill the whole screen, how do i fix this?
- epson et-2400 won't connect to my wifi, any tricks?
- tramontina pressure cooker safety valve is leaking steam constantly during cooking, is that safe?
- what kind of stove can i use my t-fal clipso pressure cooker on? i have an induction cooktop.
- the safety valve on my barton pressure cooker is blasting out a ton of steam. what do i do?
- when do i need to replace parts on my denali tanker pressure canner?
- prestige popular aluminum pressure cooker safety valve keeps popping up before it gets to pressure.
- my hawkins contura base has these silver metallic marks from my gas stove, how do i remove them without damaging the black finish?
- where do i find the model number on my presto pressure cooker?
- can i cook oatmeal in my calphalon pressure cooker? heard it might clog it.
- what parts do i need to replace on my presto 01264 and what are the model numbers?
- t-fal pressure canner 22 quart making weird hissing from the top, is that the pressure release valve?
- hawkins classic pressure cooker safety valve keeps releasing steam constantly, is that normal?
- why does my cosori pressure cooker keep showing the 'Food burn' error code?
- supvan t50m pro is printing but the text is all blurry and smudged, how do i fix this?
- my hp officejet pro 8125 won't connect to wifi, keeps dropping the connection
- the red light on my niimbot b1 is solid, what does that mean?
- my knwon thermal label printer light is flashing red fast, what's wrong?
- epson ecotank et-2800 warranty says two years but mine is acting up after 18 months, am i covered?
- how do i check the total pages printed on my canon pixma ts4320
- my electactic drink fridge isn't getting cold, the dial is on 7. help?
- how do you deep clean the inside of an auertech portable washer? it's starting to smell
- my crzoe ice maker is making ice but the cubes are all stuck together, how do I fix that?
- jeevony dv180 vent hose keeps slipping off the dryer port even with the clamp
- the plastic shelf in my antarctic star mini fridge is warping, is this safe?
- how do i clean the ninja blendsense blender base? can i just wipe it down?
- my nutribullet baby date dial cup cracked in the freezer, did i do something wrong?
- hamilton beach wave action blender is leaking from the bottom of the jar, how do i fix this?
- my ovente hr981b blender light is blinking red when i try to use it, what does that mean?
- my ninja ultracrush blender won't turn on at all, just shows INSTALL on the screen
- can i put the cross blades from my magic bullet in the dishwasher?
- my nutribullet smoothie came out super chunky and the motor sounded strained, what did i do wrong?
- blender keeps turning off after a minute of use, red light blinking
- the glass container just cracked after i took it out. is it safe to keep using?
- air fryer keeps flashing and beeping but won't start cooking, what am i doing wrong?
- my honeywell beverage cooler just shows E1 on the display and won't cool, what does that mean?
- the manual says it has a flammable refrigerant. is it safe to have in my kitchen?
- oven won't turn on at all, the lights are off. checked the outlet and it's fine. what do i do?
- coffee maker keeps shutting off by itself after brewing, is there an auto shutoff?
- my new cosori air fryer is showing E04 on the display, what does that mean?
- the red light is flashing but the blades aren't spinning. what does that mean?
- my coffee pot is leaking water from the bottom onto my counter, what's causing that?
- air fryer just beeps and doesn't do anything when I press start
- my ice maker says 'ADD WATER' but i just filled it, it's not making ice. help?
- is it safe to wash the glass carafe in the dishwasher? i don't want it to crack.
- my coffee maker says "CLEAN" on the screen and then starts brewing. what does that mean and how do i make it stop?