braava jet m6 light ring is pulsing while it's on the charger, is it charging?

A pulsing light ring means the robot is actively charging. A solid light means it is fully charged.

If the CLEAN button text is also pulsing: The robot is in the middle of a cleaning job. It will automatically resume where it left off once the battery is recharged.

Standard charging procedure:

1. Slide the robot onto the charging station contacts.
2. The light ring will pulse while charging.
3. For a first-time charge, allow 3 hours prior to the first cleaning job.

If the robot does not charge:

• Check that the charging station is plugged in.
• Ensure the robot's charging contacts and the station's contacts are clean and free of debris.
• Verify the robot is properly seated on the contacts.

Note: After 90 minutes of inactivity off the charging station, the robot will automatically end any cleaning job.