All questions — page 133
Browse by Problem
-
how do i clean the screen on this oled? the manual says not to use any liquids but it's got fingerprints and dust.
The anti-reflective coating on the OLED panel is delicate and can be damaged by standard glass cleaners, alcohol, or ammonia. Using them will create permanent …
-
the tv keeps saying 'no signal' from my playstation 5 even though it's definitely on and plugged into hdmi 3. have to unplug everything to get it back.
This is an HDMI handshake failure, often related to the VRR (Variable Refresh Rate) or 4K/120Hz signal format. The TV's HDMI port is not correctly synchronizin…
-
just got this oled and there's a faint high-pitched whine or buzz coming from the back, only when bright white screens are showing.
This is coil whine from the power supply circuitry. It is a physical phenomenon, not a defect in the panel. The sound occurs during high brightness, high-contr…
-
my new a80l won't connect to my 5ghz wifi, only sees the 2.4. everything else in the house works fine on the 5.
The TV's Wi-Fi module is likely set to a channel width or DFS channel your router uses for 5GHz that the TV does not support. The Bravia's wireless chip has co…
-
my tv says 'no signal' on the right hdmi port but my playstation works fine on the other one
This points to a problem with that specific HDMI port on the TV. It could be a software glitch with its EDID detection, a physical connection issue, or (less l…
-
the audio keeps cutting out for a second every few minutes over hdmi arc to my soundbar, video is fine
This is usually an HDMI-CEC/ARC handshake issue. The TV and soundbar are having a minor communication glitch over the HDMI cable, causing the audio stream to d…
-
how do i get rid of the 'live tv' button on the home screen or change the default input, it keeps going to antenna
The Google TV interface has a 'Live' tab that's prominent and, by default, tries to tune antenna channels. If you don't use an antenna, it's just a dead button…
-
the screen on my tcl has these weird dark patches or clouds in the corners when it's a dark scene, is this normal
That's called 'backlight clouding' or 'DSE' (Dirty Screen Effect). It's a physical characteristic of the panel and backlight assembly, not a software bug. On b…
-
my tv randomly turns itself on in the middle of the night, it's creepy and waking me up
This is almost always caused by a setting called 'Fast TV Start' (or a similar quick-resume feature) or by an HDMI-connected device sending a wake-up signal. G…
-
the remote for my 55s546 is super laggy or just doesn't work unless i'm pointing it right at the tv
The remote uses Bluetooth for voice commands and setup, but for basic navigation (d-pad, power, volume) it actually uses Infrared (IR), which requires a direct…
-
tcl google tv keeps saying 'low on storage' and apps are crashing, how do i clear space on this thing
Yeah, this one's common. The internal storage on these models is pretty limited, and the OS and updates eat a big chunk of it. Once it's near full, everything …
-
my tcl s546 tv just shows a black screen but the red standby light is on, sound works but no picture at all
This is the classic 'backlight failure' or 'LED driver' issue on these models. The panel is getting a signal and the TV is technically on, but the lights behin…
-
when i switch to an hdmi input on my lg c3, there's no sound through my soundbar connected with earc. i have to reboot everything.
This is a common HDMI-CEC/ARC handshake failure. The TV and soundbar get confused about which device should be the audio controller when you change sources. Fi…
-
the magic remote for my c3 feels super laggy and the pointer jumps around, is the remote bad?
The remote isn't bad. The issue is almost always interference from other IR/Bluetooth sources (like soundbars, LED lights, or even sunlight) or weak batteries …
-
my lg c3 won't connect to wifi but every other device in my house can, it just keeps searching or says failed.
This is typically a software glitch in the TV's network module or an incompatibility with certain router settings (like WPA3 or a 5GHz channel width). First, p…
-
how do i clean the screen on my lg c3 oled without ruining the coating? i see smudges.
The anti-reflective coating on the OLED screen is delicate. Using standard glass cleaner, paper towels, or microfiber cloths with chemical treatments will perm…
-
i hear a faint clicking or popping sound from the back of my lg oled tv sometimes, is the panel breaking?
No, the panel is not breaking. This is a normal physical characteristic of OLED TVs, including the C3. The sound is caused by the expansion and contraction of …
-
webos on my new lg c3 is super laggy and apps keep freezing, do i need to reset the whole thing?
The internal storage on the TV's processor can get bogged down with cached data from apps, especially if you've installed many. This causes the OS to feel slug…
-
the screen on my oled55c3pua looks weirdly dim in hdr mode when i'm playing a game on my ps5, like everything is gray and washed out.
This is almost always caused by the TV's Auto Brightness Limiter (ABL) or Auto Static Brightness Limiter (ASBL) kicking in aggressively, combined with incorrec…
-
my lg c3 tv just turned off by itself and now the red standby light is blinking 3 times, what does that mean?
A three-blink red light is the TV's way of telling you it detected a serious internal power fault and shut down to protect itself. This is almost always a powe…
-
all my hdmi ports stopped working at the same time, no signal on any of them.
When all HDMI ports fail simultaneously, it's rarely the ports themselves. It's usually a software glitch that has disabled the HDMI controller chip, or the TV…
-
getting a weird buzzing sound from the back of the tv, not the speakers, it's a constant electric hum.
That's coil whine, a high-frequency vibration from the electrical components, usually the power supply board. It's more noticeable in quiet rooms and can vary …
-
the remote (solarcell one) that came with the tv is super laggy and unresponsive.
The SolarCell remote uses RF (radio frequency), not IR, so it shouldn't need a direct line of sight. The lag usually means it's low on power or there's interfe…
-
how do i clean the screen on this qled without ruining the coating? it's got a weird matte finish.
You're right to be careful. That matte anti-glare coating on the Q80C can be damaged by harsh chemicals or abrasive cloths. Streaks or a hazy look after cleani…
-
my sound keeps cutting in and out when using the built-in speakers, especially with dialogue.
That's often the TV's "Auto Volume" or "Sound Optimization" features kicking in. They're trying to balance loud commercials with quiet dialogue, but they can g…
-
screen looks dim and washed out no matter what i do with the picture settings on my qn55q80c.
This sounds like the TV's ambient light sensor is turned on and is aggressively dimming the picture based on your room's lighting. It's a feature meant to save…
-
the tv keeps saying "network disconnected" but my wifi is fine and every other device works.
The TV's Wi-Fi module is having trouble maintaining a stable connection, which is a known quirk with some Samsung smart TVs. It's often a software handshake is…
-
my new samsung q80c won't turn on, just a red light on the bottom and nothing else, tried unplugging.
That red light means the TV is in standby mode but isn't booting up. It's usually a power supply hiccup or a software glitch preventing the main board from sta…
-
the clock on my ge profile microwave resets to 0:00 every time i turn the kitchen lights off. why?
This issue is almost certainly caused by a "voltage sag" or a transient power surge occurring on the shared electrical circuit. When you flip the kitchen light…
-
my microwave works but the interior light won’t come on when i open the door. bulb looks fine.
The failure of the interior light to activate upon opening the door on the GE Profile PVM9005SJSS is almost always caused by a failure of the Door Light Switch…
-
how do i clean the grease filter on this thing? it’s stuck and won’t come down from the vent.
The GE Profile PVM9005SJSS uses a spring-loaded aluminum mesh grease filter located on the underside of the chassis. Over time, aerosolized cooking oils and fa…
-
the sensor cook on my microwave burns everything. popcorn setting sets it on fire. what’s the deal?
The GE Profile PVM9005SJSS utilizes a humidity sensor—essentially a hygrometer—located behind a small plastic grille on the upper interior wall. This sensor mo…
-
i replaced my stove and now the microwave won’t turn on at all, no lights, no display, nothing. did i break it?
You have not "broken" the microwave in the sense of a component failure; rather, you have likely interrupted the electrical circuit. The GE Profile PVM9005SJSS…
-
the vent fan on my ge profile microwave is crazy loud, sounds like a grinding noise, how do i fix it?
The grinding noise in your GE Profile PVM9005SJSS is typically caused by a mechanical failure in the centrifugal blower assembly. Specifically, the plastic blo…
-
the turntable in my over the range ge microwave just spins super slow or sometimes not at all, is the motor dead?
When the turntable on a GE Profile PVM9005SJSS begins to rotate sluggishly or stalls entirely, the issue typically stems from one of two failure points: mechan…
-
my ge profile microwave just shows F0 on the display and won’t respond to any buttons, what’s wrong with it?
The "F0" error code on the GE Profile PVM9005SJSS is a critical safety fault indicating a Door Interlock Failure. This occurs when the main control board detec…
-
the door feels loose and doesn't seem to close as firmly as it used to, is this dangerous?
The door hinge assembly or latch mechanism is worn or out of alignment. This can affect the door switches that allow operation. Inspect the three door latch ho…
-
the clock on my farberware microwave resets to 0:00 every time i have a power flicker, is there a battery?
The Farberware FMO11AHTBKB is designed as a cost-effective, entry-level appliance. Unlike high-end convection ovens or smart appliances, this model lacks a Non…
-
it just stopped working, no lights, no display, no power at all. checked the outlet and it's fine.
Complete power loss points to the thermal fuse or main control board failure. The thermal fuse is a primary safety component. Unplug the microwave. The 15-amp …
-
the turntable won't spin at all, it just sits there and my food cooks unevenly
The failure of the turntable to rotate in the Farberware FMO11AHTBKB is typically caused by a mechanical disconnect between the drive motor and the glass tray.…