Monitors (Page 2)
-
can i use a monitor arm with the samsung g6? the stand takes up my whole desk
Absolutely, and a lot of people do. The stock stand is a monster. The G6 uses a standard 100x100mm VESA mount pattern. To remove the stand, lay the m…
-
the hdr on this monitor looks washed out and terrible in windows 11, what am i doing wrong?
You're not doing anything wrong; Windows HDR calibration is just a mess. The G6 is an HDR600 monitor, but Windows often applies incorrect tone mappin…
-
my g6 makes a faint buzzing or whining noise from the back, is this coil whine and is it normal?
That's coil whine, coming from the power supply or display circuitry. It's not 'normal' in the sense of being ideal, but it's a common issue with hig…
-
how do i turn off that super bright red power light on the bottom of my odyssey g6? it's like a beacon at night
Yeah, that LED is obnoxiously bright. Samsung calls it the 'Core Lighting', and it's on by default. You can't turn it off completely, but you can dim…
-
the screen on my samsung g6 flickers or goes black for a second randomly, it's driving me nuts
This is almost always a cable or signal integrity issue, not the panel itself. The G6 pushes a lot of data for 240Hz, and a subpar cable can't keep u…
-
my odyssey g6 monitor just shows a black screen but the power light is on, anyone know how to fix it?
The monitor is getting power but isn't receiving a valid video signal, or it's stuck in a standby/input detection loop. This happens a lot with the a…
-
i turned on the elmb sync but now my game looks super dark, can't see anything in shadows
This issue is caused by the way the ASUS VG28UQL1A handles backlight strobing. ELMB (Extreme Low Motion Blur) works by rapidly switching the backligh…
-
the joystick controller on the back is stuck or really hard to press in to select things, feels broken
This issue is caused by a mechanical failure in the 5-way directional joystick module located on the rear of the ASUS VG28UQL1A. The joystick operate…
-
the hdr looks washed out and gray in windows 11, not bright at all. did i get a bad unit?
This "washed out" or gray appearance is rarely a hardware defect of the panel itself, but rather a systemic mismatch between the Windows 11 HDR metad…
-
why does my screen go black for a couple seconds randomly when gaming? using displayport from my pc
DIAGNOSIS: The DisplayPort link is losing sync, often due to a marginal cable or a bandwidth overload. FIX: First, power everything down. Reseat the …
-
the monitor makes a faint buzzing or whining noise from the back, gets worse when i play a bright hdr game
This phenomenon is known as "coil whine," specifically originating from the inductor coils within the monitor's internal power delivery system or the…
-
just got this monitor and the text looks blurry or fuzzy on the desktop, is my 4k panel defective?
This issue is almost certainly not a hardware defect of the 4K panel, but rather a mismatch between the Windows subpixel rendering engine and the mon…
-
my vg28uql1a is stuck on 'no signal' with my ps5 even though everything's plugged in, hdmi 2.1 cable and all
This "No Signal" state on the ASUS VG28UQL1A is typically caused by an HDMI 2.1 handshake failure. Because this monitor supports high-bandwidth 4K @ …
-
can i mount this on a vesa arm? the stand takes up so much room and i don't see any screw holes.
You can, but it's not straightforward. The LG 27MQ400-B does have VESA mount compatibility (100x100mm), but the screws and the interface are hidden b…
-
is there a way to make the text look sharper? everything seems a little blurry or fuzzy on this 1080p 27 inch screen.
At 27 inches and 1920x1080 resolution, the pixel density is relatively low (about 82 PPI). This can make text and fine details appear less sharp than…
-
the screen keeps going black for a second and then coming back, like it's losing signal, while i'm just working normally.
This is typically a handshake issue between the monitor and your computer's graphics card, often related to the HDMI cable or the monitor trying to s…
-
how do i clean the screen on this thing? the lg site says not to use glass cleaner but it's just glass right?
It's not just glass—it's a glass panel with a matte anti-glare coating. Harsh chemicals like ammonia or alcohol in standard glass cleaners will perma…
-
i hear a faint but annoying high-pitched whine or buzz from the back of my monitor, is this normal or should i return it?
That's likely coil whine from the monitor's internal power supply or components. It's not "normal" in the sense of being intended, but it's a common …
-
the colors on my lg monitor look really washed out and flat compared to my laptop screen, how do i fix that?
The monitor is likely using a default picture mode (like "Reader") that prioritizes low blue light over color vibrancy, or your graphics driver is ou…
-
the power button on my lg 27mq400 feels super mushy and sometimes i have to press it like 5 times to turn it on, is it broken?
The tactile membrane switch behind the power button is likely failing or has become unresponsive due to wear or a minor manufacturing defect. It's a …
-
my new lg 27mq400 monitor just says 'no signal' even though my hdmi is plugged into my laptop, what am i missing?
The monitor is powered on but not receiving a video signal from your source. The most common culprit is the laptop not being set to output to the ext…
-
the monitor keeps going to sleep even when i'm watching a full screen video or have a document open.
The monitor's Power Saver mode is detecting no signal change and entering sleep. The signal from the PC is static or not recognized as 'active'. Adju…
-
there's a single dead pixel stuck on black in the middle of my new p2722h screen. can i fix it or do i need to return it?
A sub-pixel is stuck in a permanent 'off' state. This is a physical manufacturing defect in the LCD panel. First, attempt a software un-sticking meth…
-
the usb ports on the side of my monitor don't work for charging my phone or connecting a mouse.
The USB hub is inactive. It requires both data and power from the upstream USB-B connection to your computer. Two cables are mandatory. 1. Ensure the…
-
the colors on my dell p2722h look washed out and weird compared to my old monitor, especially the blacks are gray.
The monitor is likely using a non-standard preset or incorrect digital range (Limited vs. Full RGB). First, reset the color settings. Press the menu …
-
how do i clean the screen on my p2722h? the microfiber cloth just smears it more and i'm scared of damaging the coating.
Incorrect cleaning materials are smearing oils and activating the anti-glare coating, creating streaks. Use the correct two-step process. First, powe…
-
my dell p2722h screen has a constant faint buzzing or humming sound, especially on bright white screens.
Audible coil whine from the internal power supply or backlight inverter. This is a physical characteristic of some units, exacerbated by high brightn…
-
just got a p2722h and the screen says 'no hdmi signal from your device' but my laptop is definitely plugged in.
The monitor is powered on but not receiving a valid video signal. The input source is likely incorrect, or the cable/port is faulty. Follow this sign…
-
my dell p2722h monitor won't turn on at all, no power light, nothing. tried different outlet.
No power delivery to the monitor. The primary suspect is the external power brick or its cable connections. First, check the physical connections. Un…
-
how do you even clean the camera lens on the v43 without smudging it or breaking it? it's got all these little holes around it.
You're right to be careful. Those little dark circles around the main lens are the infrared LEDs for night vision, and smudges on them or the lens wi…
-
my monitor keeps freezing, the image just sticks and i have to power cycle it to get it back.
The parent unit's processor is locking up, usually due to a weak or inconsistent signal from the camera causing a communication crash. Improve the wi…
-
there's a high pitched whining or buzzing sound coming from the camera, you can hear it on the parent unit audio.
That's electronic noise, likely from the camera's power supply (the wall plug transformer) being picked up by the sensitive microphone. It's a known …
-
the parent unit battery drains super fast, like it only lasts an hour off the charger when it's supposed to last all night.
The rechargeable battery inside the parent unit is worn out or wasn't calibrated, or a setting is killing it. These lithium-ion batteries degrade ove…
-
i can't get the split screen to work on my monitor, it just shows one camera big even though i have two cameras set up.
You're probably not in the correct viewing mode. The V43 doesn't auto-split; you have to manually select the split-screen view after both cameras are…
-
the night vision on my camera looks really grainy and awful, like it's all static, but the daytime picture is fine.
The infrared (IR) LEDs for night vision are either dirty, blocked, or there's too much ambient light confusing the sensor. The V43's IR LEDs are thos…
-
the parent unit on my v43 beeps constantly for no reason, like every 30 seconds, and it's driving me nuts.
Yeah, this one's common. The monitor is losing its wireless link to the camera, triggering a 'connection lost' alert. It's not random; it's a signal …
-
my babysense v43 monitor screen is just completely black and won’t show anything, but the power light is on.
The monitor is powered on but the LCD screen backlight or the video feed has failed. The most common culprit is the monitor itself entering a weird s…
-
the monitor won't wake up from sleep when my pc does, i have to power cycle it every time
A handshake failure between the PC's graphics card and the monitor during the sleep/wake cycle. This is often a driver issue or a power saving settin…
-
i'm getting weird flickering or screen tears even with g-sync compatible enabled on my mag274qrf
Incorrect Adaptive-Sync configuration or a conflict between the monitor's refresh rate, NVIDIA control panel settings, and in-game settings. The moni…
-
hdr looks washed out and grey on this monitor when i turn it on in windows 11
Windows HDR is active, but the monitor is not in its HDR image mode. The monitor must be in the correct mode to properly tone-map the HDR signal. The…
-
the joystick button on the back of my msi optix feels unresponsive or opens the wrong osd menu
The 5-way navigation joystick is misaligned or the directional press is being misinterpreted. This is often due to pressing the joystick at an angle …
-
how do i clean the screen on this msi monitor? the matte coating seems weird and i'm scared to damage it
The monitor has a standard matte anti-glare coating. Using incorrect cleaners or abrasive materials can permanently smudge or damage this coating, cr…
-
my monitor makes a faint but audible high-pitched buzzing or whining noise, seems to come from the back
This is coil whine from the monitor's internal power supply or circuitry. It's often related to the refresh rate or specific brightness/contrast sett…
-
the colors on my msi mag274qrf look way too oversaturated and cartoonish, especially reds
The monitor is likely using its native wide-gamut mode without proper color profile management. The default "User" mode targets the DCI-P3 color spac…
-
my msi optix mag274qrf-qd monitor screen is just black but the power light is on, no signal message
The monitor is powered on but not receiving a valid video signal from your PC. The most likely cause is a loose or faulty DisplayPort/HDMI cable conn…
-
can i clean the matte screen on this thing? the microfiber cloth just smears it and makes it look worse.
The anti-glare coating on the IPS panel is porous. Dry dusting or using a dirty cloth pushes oil and debris into the coating, creating smears. Use a …
-
the screen has a weird flicker or tearing in the middle when i play games, even with freesync turned on.
This is likely a conflict between the game's frame rate, the monitor's Adaptive-Sync range (48-75Hz), and the graphics card's settings. First, confir…
-
the monitor won't wake up from sleep when i move my mouse, i have to press the power button every time.
This is a failed wake-up signal handshake, commonly due to the computer's power management settings or a deep sleep state on the monitor. First, disa…
-
how do i get the picture-by-picture (pbp) mode to work? i have two computers connected but can't split the screen.
PBP mode has specific active signal requirements. It will not activate if one input is idle or in sleep mode. Connect the two source devices to two d…
-
there's a constant faint high-pitched whine or buzz coming from the back of the monitor, is this normal?
This is coil whine from the monitor's internal power supply or voltage regulators. It is a physical characteristic, not a defect, but its audibility …