All questions — page 149
Browse by Problem
-
my new sansui curved monitor won't turn on at all, no light, nothing. i checked the outlet.
Power supply circuit is dead. The external power brick is the most likely failure point. Unplug the power brick from the wall and monitor. Inspect the DC barre…
-
the colors on my arzopa look really washed out and dull compared to my laptop screen, how do i make it more vivid?
The default picture profile is likely set to a mode like 'sRGB' or 'User', which has a limited color gamut for accuracy. Your laptop may be using a more satura…
-
i connected my nintendo switch to the arzopa with usb-c but it's not charging the switch, just showing the picture
This is expected behavior. The monitor's USB-C video input port does not provide significant power output. It delivers just enough to run the monitor itself, n…
-
the touch buttons on the side of my arzopa monitor are super sensitive and keep bringing up the menu when i don't want them to
The capacitive touch buttons have no physical travel or tactile feedback. Accidental activation is common, especially when handling the monitor or if it's plac…
-
i can't get the hdr mode to turn on or do anything, the setting is there but the picture looks the same
HDR on this monitor is a software-based feature, not a hardware HDR specification. It applies an HDR tone-mapping effect to an HDR signal, but your source devi…
-
my arzopa monitor works fine for a bit then the screen starts flickering like crazy, especially on brighter scenes
This is a symptom of insufficient power delivery to the monitor. The panel is drawing more current than the connected cable or source can provide, causing volt…
-
the built-in kickstand on my arzopa feels super loose and won't hold the screen up anymore, did i break it?
The kickstand hinge has likely worn out or the internal friction mechanism has failed. This is a reported point of failure on this ultra-slim design. There is …
-
i'm trying to use the 144hz mode on my arzopa but my pc only shows 60hz as an option, how do i fix this?
Your PC's graphics settings are not detecting the monitor's 144Hz capability. This is almost always a cable or connection type limitation. You must use a speci…
-
my arzopa portable monitor turns on but just shows a black screen, no signal message or anything, what's wrong?
The monitor is receiving power but not receiving a valid video signal from your source device. The most likely cause is an incompatible video mode or refresh r…
-
there's a dead pixel, a tiny black spot that won't go away. do i have to return the whole monitor?
A single pixel that is permanently off (black) on a dark background is a dead sub-pixel. This is a physical manufacturing flaw, not something you can with soft…
-
the 1ms mprt setting in the menu makes the screen super dark and flickery, is it broken?
It's not broken. The '1ms MPRT' setting is a backlight strobing feature (often called 'VRB' or 'Motion Blur Reduction'). It pulses the backlight to reduce moti…
-
i can't get the vesa mount to line up, the holes on the monitor don't seem to match my arm.
You need to remove the monitor's default stand bracket first. It covers the 100x100mm VESA pattern. The process isn't intuitive. Lay the monitor face down on a…
-
there's a faint but constant high-pitched buzzing or coil whine coming from the back of the monitor, especially on dark screens.
This is coil whine from the monitor's internal power supply or backlight circuitry. It's a common physical characteristic, not a defect, and is often more noti…
-
the screen has a weird purple or green tint, colors look totally off compared to my laptop.
The monitor's color temperature or picture mode is set incorrectly, or you're using the wrong dynamic contrast setting. VA panels often ship with overly satura…
-
how do i get the 160hz refresh rate to work? it's stuck at 60hz in windows settings on my gaming pc.
Windows is using a generic display driver, not the monitor's native capabilities. You haven't enabled the high refresh rate in both Windows AND your graphics c…
-
my sansui monitor just shows 'no signal' and goes to sleep even though my pc is on, using the hdmi cable it came with.
The monitor isn't detecting a video signal from your PC. The most common cause is the PC's output being set to the wrong source or refresh rate. First, force t…
-
how do i clean the curved screen without damaging it? the microfiber cloth just smears it more.
Smearing happens when you're using a dry cloth on a screen that has oils from your fingers or dust that's slightly greasy. You're just moving the grime around.…
-
the monitor randomly goes black for a second or two then comes back, happens while gaming.
This is typically a handshake issue between your graphics card and the monitor, often related to the cable, the refresh rate, or a feature like Adaptive Sync (…
-
i'm trying to wall mount this thing but the vesa pattern feels weird and the screws that came with my mount don't fit.
This monitor uses a 75mm x 75mm VESA pattern, but the mounting holes are recessed in a plastic housing on the back. You can't use the standard short screws tha…
-
the colors look really washed out and bad compared to my old monitor on the same pc.
The default picture settings out of the box are often too bright and have low contrast. You're also probably comparing it to a monitor with a different panel t…
-
there's a weird high-pitched buzzing or coil whine coming from the back of my monitor, especially on dark screens.
That's electronic coil whine. It's caused by components (like inductors or capacitors) on the monitor's internal power supply vibrating at a high frequency und…
-
how do i get 144hz on this sceptre monitor? my windows settings only show 60hz as an option.
You're likely using the wrong cable or have it plugged into the wrong port. This monitor's 144Hz refresh rate is only available through its DisplayPort connect…
-
the built-in speakers on my c248 are super quiet and sound tinny even at max volume.
The built-in speakers on most budget monitors, including this one, are essentially emergency audio. They're small, low-power drivers that can't produce good ba…
-
my sceptre curved monitor just has a black screen but the power light is on blue, no signal message or anything.
This is a classic 'no signal' scenario. The monitor is getting power, but it's not receiving a valid video signal from your computer, so it just shows a blank …
-
my kyy monitor makes a faint high-pitched buzzing sound when it's on, especially when displaying a bright white screen.
This is coil whine from the monitor's internal power circuitry or backlight inverter. It is an audible vibration of electrical components under load, not a def…
-
the smart cover for my kyy monitor won't fold into a stable stand, it just flops over and the monitor falls flat.
The magnetic folio cover is not engaging correctly with the monitor's metal frame. This is usually due to the cover being misaligned or the magnets being too w…
-
can't get the auto-rotate to work on my kyy portable monitor, the screen stays landscape even when i turn the monitor vertically.
The auto-rotate feature requires a specific, active data connection from the host computer's sensors, not just a video signal. It is not working because the ne…
-
the screen on my kyy monitor has a yellowish tint on the left side and cooler colors on the right, is this normal?
This is not normal. It indicates uneven backlighting or a panel uniformity issue, often described as "backlight bleed" or "color temperature shift." It is a ph…
-
my kyy monitor is connected and shows my desktop, but the colors look totally washed out and dim, hdr setting is greyed out.
The monitor is receiving a basic video signal, but the full data connection for advanced features like HDR and proper color depth is not active. This happens w…
-
the touchscreen on my kyy portable monitor stopped working after i updated windows, it's just a regular display now.
Windows Update replaced or removed the correct touchscreen driver for the monitor's specific chipset. The monitor is now being recognized as a generic PnP Moni…
-
got a weird flickering horizontal line across the bottom of my kyy 15.6 inch monitor when i move it, goes away if i hold it still.
This is a physical connection issue, not a software or signal problem. The internal ribbon cable connecting the display panel to the controller board is becomi…
-
my kyy portable monitor turns on for a second, shows the logo, then goes black and won't display anything from my laptop.
The monitor is receiving power but not a stable video signal. The most likely cause is insufficient power delivery through a single USB-C cable. You need to su…
-
the screen has a weird yellow tint or the colors look washed out compared to my laptop
The monitor's color profile or temperature is set differently from your main display. Portable monitors often have less vibrant panels and limited color calibr…
-
can i use this innoview monitor with my nintendo switch? i plugged it in with hdmi and it's not working
The Switch outputs video via its dock's HDMI port, not directly from the USB-C port on the console itself (without special adapters). You likely connected the …
-
the buttons on the side of my innoview monitor are super confusing, how do i actually adjust the brightness?
The single multi-function button and rocker switch interface is non-intuitive. There's no dedicated brightness button, it's buried in the OSD menu. Press the m…
-
my innoview gets really hot on the back after like 30 minutes, is that normal?
Some warmth is normal due to the internal power circuitry and the LED backlight, but it shouldn't be uncomfortably hot to the touch. Excessive heat often point…
-
the touchscreen on my innoview isn't working at all, it's just a regular screen now
The touch function requires a separate driver to be installed on your computer, and not all InnoView models have touch capability. First, verify your specific …
-
how do i get sound to come out of my innoview monitor? it has speakers but my laptop audio still plays from the laptop
The monitor's built-in speakers aren't being recognized as the default audio output device by your computer. This is a common OS setting quirk. On Windows, rig…
-
innoview monitor screen flickers like crazy when i move it or touch the cable, goes solid if i leave it alone
This is almost always a loose or failing connection inside the cable or at the port. The jostling disrupts the signal. Yeah, this one's common with any portabl…
-
my innoview portable screen just stays black when i plug it in with usb-c, power light is on but nothing shows up
The monitor is receiving power (hence the light) but not a video signal from your source device. This usually means the USB-C cable you're using is power-only,…