The overload protection has activated. The mower is trying to cut too much grass at once.
Fix it:
- Release the blade control handle to stop the mower.
- Press the battery release button and remove the battery pack.
- Check for grass accumulation behind the cutting deck. Clear any blockage.
- Reinstall the battery and restart.
If that didn't work:
- Grass is too wet or too long. Wait for the grass to dry or raise the cutting height.
- Cutting height is set too low for the conditions. Adjust the cutting height to a higher setting (3 through 8).
Prevention: Slow your pace. For thick grass, use a higher cut setting first, then lower it for a second pass.