In Sleep Mode, the design is to turn off all lights except the sleep mode indicator itself. If other lights are still on, you might not be fully in Sleep Mode.
Here's how to enter it properly:
- From Auto Mode, press the 'mode' button on the remote once, or press the 'fan speed' button on the control panel four times to enter Sleep Mode.
- From Manual Mode, press the 'mode' button on the remote to cycle to Auto Mode, then press it again to enter Sleep Mode. On the control panel, press 'fan speed' to cycle to Sleep Mode.
Once in Sleep Mode, all panel lights except the sleep indicator should be off. If you press any key, the lights will activate for 2 minutes before automatically dimming again.
If the UV or Ionizer symbols are lit, those functions are still on. You can turn the Ionizer off with its button on the panel or remote. The UV light can only be turned off via the remote control's UV button.
If the main display panel is still illuminated, check that you're not in Timer mode, as the timer digits will show. Press the Timer button to cycle it to 'Off'.