trying to set a schedule on my robovac 11s but it's not working, the clock icon just blinks

Scheduled cleaning fails if the time or AM/PM is set incorrectly, or if the battery is too low.

Step sequence:

1. Set the correct time first. Press the clock button on the remote. The display will blink.
2. Use the forward/back buttons to set the hour and minute. Confirm AM/PM is correct.
3. Press the clock button or the play/pause button to save. You should hear a single beep.
4. Now set the schedule. Press the schedule button. The icon will blink.
5. Set the hour and minute for the cleaning start time, confirm AM/PM.
6. Press the schedule or play/pause button to save. You should hear a single beep.

If that didn't work: Ensure the main power switch on the bottom of the RoboVac is ON. Also, check that the battery has enough charge to initiate a cleaning cycle.

To cancel a schedule: Press and hold the schedule button for 3 seconds until the RoboVac beeps twice and the icon disappears.