Diagnosis
The mopping pads are either too wet, dirty, or the robot's drying station isn't activating the hot air cycle correctly. This is a common gripe with the auto-drying feature.
How to Fix It
Manually trigger a drying cycle. In the app, go to the Dock settings and press "Dry Mopping Pads." Let it run the full 2-hour cycle. While it runs, remove the pads, hand-wash them with mild detergent, and let them air dry completely before reattaching.
If That Didn't Work
Check the water tank setting. In the app, for your saved floor plan, ensure the water flow isn't set to "High" for sealed hard floors. Try a "Medium" or "Low" setting for less moisture.
Heads Up
The hot air drying only works if the pads are *centered* on the docking station trays. After the robot docks, visually confirm both pads are fully seated on the heated vents.