Security Cameras (Page 2)
-
my blink doorbell won't record any motion clips even though the motion is turned on.
The system is not armed. Recording is controlled by the system Arm/Disarm schedule in the Blink app. Open the Blink app. On the home screen, verify t…
-
the infrared night vision on my doorbell looks all cloudy and white, can't see anything.
This is IR glare or reflection. The doorbell's infrared LEDs are reflecting off a nearby surface, like a door frame, wall, or glass cover, and washin…
-
i get a 'failed to connect' error every time i try to use live view on my blink doorbell.
The Live View feature requires a stable, bidirectional connection. This error points to an upload speed or latency issue on your home network. Check …
-
doorbell just keeps chiming inside by itself, nobody’s at the door and the app shows no motion.
This is a false trigger. The most common cause is a weak Wi-Fi signal causing the doorbell to momentarily disconnect and reconnect, which can registe…
-
blink doorbell battery drains in like a week even with low activity, is this normal?
No. Rapid battery drain is typically caused by excessive triggering or a sub-optimal motion detection zone. First, adjust your motion settings. In th…
-
my blink doorbell camera just shows a solid blue light and won’t connect to the app at all, what do i do?
A solid blue LED indicates the doorbell is in setup mode. It has failed to complete its initial or subsequent connection to your Wi-Fi network. Perfo…
-
the magnetic mount for my wyze cam og outdoor won't stay put, it keeps sagging or falling off the metal surface.
The magnet isn't strong enough for the surface, or more likely, the surface isn't actually ferromagnetic (steel or iron). Many exterior wall mounts, …
-
i get constant 'motion detected' notifications from my wyze cam og but it's just a shadow or a light changing.
The camera's Pixel-Based Motion Detection is getting triggered by changes in light and shadow, not just objects. This is the biggest cause of false a…
-
my wyze cam og's video is just a black screen at night but the infrared leds look like they're on.
The infrared (IR) LEDs are illuminating, but the camera's night vision sensor or lens is blocked or misaligned. Often, it's a simple reflection or ob…
-
the status light on my wyze cam og is solid blue but the app says it's offline and i can't view it.
The camera has power and is on, but its communication link to Wyze's servers is broken. Your internet or Wyze's cloud service might be the issue, not…
-
why does my wyze cam og keep going offline every night and coming back in the morning? it's plugged in fine.
This is almost always a Wi-Fi signal issue that gets worse at night. It's not the camera's power, it's the connection dropping when household network…
-
my wyze cam og outdoor is supposed to be waterproof but now there's condensation or fog on the inside of the lens.
The seal has been compromised. This usually happens if the camera was mounted without the magnetic base being fully clicked and twisted into the lock…
-
the camera works but the audio on my wyze cam og sounds super distorted and crackly, like a bad radio station.
The microphone is likely getting interference, either from electrical noise or a physical obstruction. It's a common gripe with these, especially if …
-
my wyze cam og just keeps blinking yellow and won't connect to the app, i've tried resetting it a bunch.
The camera is stuck in setup mode or can't find your Wi-Fi network. The solid yellow blinking is the tell—it's searching but not locking on. First, m…
-
how do i clean the outside of my nest doorbell without setting off motion alerts or damaging it?
You need to temporarily disable alerts and use the right materials to avoid scratches or water damage to the microphone/speaker grille. Use a soft, d…
-
my doorbell says it's live in the app but when i click to view it just spins and never loads the stream.
Your phone is switching between cellular data and Wi-Fi, or your home internet upload speed is too slow to send the video feed to Google's servers an…
-
the video on my nest doorbell looks blurry or hazy all the time, especially around the edges. i already wiped the lens.
This is condensation or moisture inside the camera lens housing, usually from a temperature change (like a cold night followed by a warm morning) or …
-
i pressed the button on my nest doorbell but the inside chime didn't go off, how do i fix that?
The wireless chime connector isn't properly paired or isn't receiving the signal from the doorbell. The connector plugs into an outlet inside and con…
-
why does my nest doorbell keep telling me 'person spotted' when it's just a car's headlights at night?
The infrared night vision is reflecting off shiny surfaces (like car windows, metal, or glass) and creating a blob the AI misreads as a person shape.…
-
my doorbell is fully charged but it just shows a solid red light and won't connect or do anything.
A solid red status light means the doorbell has failed its internal power-on check. It's a hardware fault, often triggered by a bad battery connectio…
-
the battery on my nest doorbell dies super fast, like in a week, even with minimal activity. what's wrong?
Your video quality and activity zones are draining the battery. High-res video and constant detection (like a busy street) force the camera to wake u…
-
my nest doorbell battery just keeps going offline and coming back on wifi every few hours, how do i make it stop?
This is almost always a weak Wi-Fi signal. The doorbell is on the edge of your router's range and drops connection when it tries to upload video. Imp…
-
the camera's live view takes forever to load and then is super laggy and pixelated.
This is a network bandwidth issue, either on your home upload speed or the camera's connection to your Wi-Fi router. First, test your internet upload…
-
i get a "device is not supported" error when trying to add my arlo essential indoor 2nd gen to the app.
The "device is not supported" error on the Arlo Essential Indoor Camera 2nd Gen is almost exclusively caused by a software version mismatch. Arlo tra…
-
the camera's night vision is just a bright white blob in the middle of the screen, can't see anything.
The "white blob" effect on the Arlo Essential Indoor Camera (2nd Gen) is a classic case of Infrared (IR) light saturation, commonly known as "IR boun…
-
my arlo camera's motion detection is terrible, it misses people walking right in front of it.
The activity zones or sensitivity settings are likely misconfigured. The passive infrared (PIR) sensor has a narrow field and needs clear line-of-sig…
-
how do you clean the lens on the arlo essential indoor camera without scratching it? the picture is getting hazy.
The haziness you are experiencing on your Arlo Essential Indoor Camera (2nd Gen) is caused by a buildup of atmospheric particulates, skin oils, and m…
-
camera says "offline" in the app every few hours even though my wifi is fine, have to keep rebooting it.
The camera is losing its persistent connection to the Arlo servers or your 2.4GHz Wi-Fi network. This is a common firmware or signal stability issue.…
-
arlo essential indoor 2nd gen camera is making a constant high-pitched whining noise, it's driving me nuts.
The high-pitched whining noise emanating from your Arlo Essential Indoor Camera (2nd Gen) is a phenomenon known as "coil whine." This occurs when the…
-
my arlo essential indoor gen 2 camera just spins a blue light forever and won't connect, what do i do?
The camera is stuck in a boot loop or firmware update process. The sync/status LED should pulse blue briefly during setup, not spin continuously. Fir…
-
my arlo baby won't charge on the dock, the light just pulses white and it dies
The magnetic charging contacts on the bottom of the camera or on the dock are dirty or corroded, breaking the connection. Power everything down. Insp…
-
how do i clean the arlo baby camera cover? it's got dried milk spots and i'm scared to ruin it
The removable fabric cover is machine washable, but the plastic camera body and lens need careful handling. For the fabric cover: simply unzip it, re…
-
the audio on my arlo baby is super quiet even with volume maxed, i can barely hear my baby
The microphone on the camera might be partially blocked, or more commonly, the audio stream is being compressed too much due to a poor WiFi connectio…
-
the temperature reading on my arlo baby is always way off, like it says 80 degrees when it's 72
The internal temperature sensor is being heated by the camera's own electronics. It's a design flaw—if the camera is plugged in and running hot, or i…
-
i can't get the arlo baby to connect during setup, it just flashes amber and never shows up in the app
The camera is stuck in its pairing/sync mode. A flashing amber light means it's looking for a connection but can't find your network or phone. Force …
-
why does my arlo baby make a loud clicking noise every few minutes? it's coming from the base.
That's the sound of the physical privacy shutter opening or closing. Yeah, it's jarring. It happens when you toggle the camera on or off in the app, …
-
the night vision on my arlo baby is super grainy and i can barely see anything, is it broken?
The infrared LEDs for night vision are either dirty or there's an object blocking them. A layer of dust or a stray crib bumper can completely scatter…
-
my arlo baby camera keeps going offline and the app says it's disconnected even though my wifi is fine
The camera is losing its connection to your WiFi router, which is the most common gripe with this model. It's usually a signal strength or network co…
-
how do i clean the lens on my stick up cam battery? it's all blurry from pollen and dust
Dirt, pollen, and water spots are accumulating on the outer lens cover, diffusing the light and creating a blurry or hazy image. It's a simple clean,…
-
my ring camera keeps going offline randomly throughout the day and then coming back
Intermittent offline periods point to an unstable Wi-Fi connection. The camera is losing its link to the router and then reconnecting when the signal…
-
i get a 'low battery' warning but the battery is fully charged, this thing is brand new
This is often a false reading caused by a poor connection between the battery and the camera's internal contacts, or the battery itself needing a 're…
-
the infrared night vision on my stick up cam looks super grainy and white, can't see anything at night
The camera's infrared (IR) LEDs are reflecting off a surface very close to the lens, like a window, screen, or wall, causing a 'whiteout' effect. If …
-
my ring camera's motion alerts are delayed by like 5 minutes, makes it useless, how do i fix this?
A significant delay means the camera is taking too long to wake from its power-saving sleep, process the event, and push the notification to your pho…
-
the battery on my ring stick up cam dies in like a week, it's supposed to last months, what gives?
The camera is being triggered far too often, which wakes it up, records, and sends data—the three biggest battery drains. High traffic areas or overl…
-
why does my stick up cam battery say 'live view failed' every single time i try to check it?
Your camera is having trouble sending a strong enough video stream back to your phone. This is usually due to insufficient upload speed from your int…
-
my new ring stick up cam battery won’t connect to wifi during setup, the light just keeps spinning blue
The camera is stuck in setup mode because it can't establish a stable handshake with your Wi-Fi router. This is almost always a signal strength issue…
-
the bird's eye view feature stopped working, it just shows a gray screen or says 'feature unavailable'
The radar module that powers Bird's Eye View has either been disabled in settings, lost calibration, or has a temporary fault. Re-enable and recalibr…
-
i see a solid white light on the front of my doorbell and it won't connect or do anything in the app
A solid white light means the doorbell is in Setup Mode, but it's frozen or failed to connect to your network. Force a hard reset and restart the set…
-
the doorbell gets extremely hot to the touch, is that normal or is it going to break?
The Ring Pro 2 runs warm during normal operation due to its processor and always-on radar chip. However, 'extremely hot' (uncomfortable to hold) is n…
-
my pro 2's motion detection is terrible, it misses people walking right up to the door or alerts me 5 minutes after they leave
The 3D Motion Detection zones and sensitivity are either poorly configured or are being thrown off by repetitive motion like a swinging tree branch. …