Soundbars & Speakers (Page 2)
-
the bose music app says ‘setup incomplete’ for my soundbar 900 and won’t let me add it.
The soundbar is stuck in a partial setup state from a previous failed attempt. It needs a hard reset to clear its network configuration. Perform a fa…
-
my bose 900 soundbar makes a faint popping or crackling sound sometimes, is it broken?
This is almost always an issue with the audio signal or connection, not a faulty speaker. Digital interference or a poor HDMI cable are the prime sus…
-
how do i get my soundbar 900 to work with my tv remote? the volume control does nothing.
HDMI-CEC (or your TV's version like Simplink, Anynet+) is not properly enabled or configured. This is a handshake issue. Enable CEC on your TV. Go in…
-
the voice pickup on my soundbar 900 is terrible, alexa barely hears me unless i shout.
The built-in microphone array is likely being obstructed or is dirty. Dust and grime on the top panel directly block the mics. Power off and clean th…
-
why does my bose 900 keep disconnecting from wifi every few days? it’s so annoying.
Interference from other devices or a router compatibility setting. The soundbar's Wi-Fi radio is less robust than a phone or computer. Change your ro…
-
my bose soundbar 900 just has a solid white light and no sound is coming out, what’s wrong?
The soundbar is stuck in a standby or Bluetooth pairing mode. This is usually a temporary software or input glitch. Force a reboot. Unplug the soundb…
-
bluetooth won't stay connected to my phone, it drops after a few minutes every time.
Wireless interference is the most likely culprit. The 2.4GHz frequency Bluetooth uses is crowded by Wi-Fi routers, microwaves, and even some wireless…
-
the dialogue setting doesn't seem to do anything, voices are still hard to hear over music and effects.
The Dialogue Clarification feature boosts the center frequencies, but if your TV is outputting a surround sound signal (like Dolby Digital), the soun…
-
how do i clean the fabric grill on the front without wrecking it? it's collecting dust.
Dust and skin oils are getting trapped in the fine mesh fabric. You can't use liquid cleaners or scrub it, or you'll drive grime into the speakers be…
-
there's a weird static or crackling noise coming from the speakers, especially during quiet scenes.
This is often electrical interference, either from a poor-quality audio cable or from having the soundbar's power cable tangled with other cords (lik…
-
soundbar keeps switching inputs on its own randomly, like from hdmi to bluetooth.
This is usually caused by the CEC control feature (called 'VIZIO TV' in the settings) getting confused by signals from your other devices, like a gam…
-
my vizio v21-h8r subwoofer is connected but there's no bass, it just sounds tinny.
The wireless connection between the soundbar and the subwoofer has dropped or was never properly paired. The sub might be on but not receiving signal…
-
soundbar turns on but no sound comes out, just a blinking white light on the front.
A blinking white light means it's powered on but isn't receiving an audio signal from your TV. It's in standby, waiting for input. This is almost alw…
-
my vizio v21 soundbar just has a solid red light and won't respond to the remote at all, what do i do?
The solid red light usually means it's stuck in a low-power or error state, often after a power surge or a firmware hiccup. It's not receiving normal…
-
how do i clean the fabric cover on the front of this lg soundbar without ruining it
The fabric grille is a non-removable, acoustically transparent material. Standard cleaning methods can push dirt into the speakers or damage the adhe…
-
hdmi arc worked for a week and now my tv says no signal
HDMI-CEC handshake failure. The communication protocol between the TV and soundbar has locked up, often due to a power state change or a connected th…
-
there's a weird popping or crackling noise from the speakers when i change volume or source
Analog circuit noise. This is a common trait in this soundbar's amplification stage when processing a sudden change in signal level or a digital sour…
-
remote won't work with my lg s40q unless i'm like 2 feet away
The infrared (IR) sensor on the soundbar is obstructed or the remote's signal is being blocked. The primary causes are a physical barrier, weak batte…
-
soundbar sounds hollow and tinny, like all the bass is gone even with subwoofer on
The subwoofer is active but not receiving the Low-Frequency Effects (LFE) channel. This happens when the soundbar's input mode or TV output format is…
-
the soundbar turns off by itself after like 20 minutes even when audio is playing
This is caused by the Auto Power Down feature. It is enabled by default. The soundbar will power off after approximately 20 minutes if it does not de…
-
i can't get the subwoofer to connect to my lg s40q soundbar, the light just stays red
A solid red LED on the subwoofer indicates it is powered but not paired. The wireless link between the soundbar and subwoofer has failed to establish…
-
my lg soundbar just flashes 'fp' on the display and no sound comes out, what does that even mean
The display showing 'FP' indicates a firmware process is active or stuck. This commonly happens after a power interruption during an update or a fail…
-
sound cuts out for a second every few minutes, happens with both hdmi and optical
This is audio dropout. Most often caused by wireless interference from your Wi-Fi network. The B650's wireless subwoofer and Bluetooth operate on 5.8…
-
trying to connect my phone via bluetooth but the soundbar isn't showing up in my phone's list
The soundbar's Bluetooth is not in discoverable mode. It only stays discoverable for 3 minutes after activation. An existing paired device may also b…
-
voice dialogue is really hard to hear but the music and explosions are way too loud
This is a dynamic range issue. The soundbar is receiving a compressed audio signal (like Dolby Digital) but isn't processing it to boost center-chann…
-
the display on the front of the soundbar is way too bright, especially in a dark room
The front panel LED brightness is set to high. There is no auto-dimming sensor on this model. The brightness level is a fixed setting. Lower the disp…
-
subwoofer that came with the hw-b650 isn't working, no sound at all from it
The wireless connection between the soundbar and subwoofer is lost. This happens after a power surge, moving the units, or interference from other wi…
-
there's a constant hissing or static noise coming from the speakers even when nothing is playing
The constant hissing or static noise you are hearing from your Samsung HW-B650 is known as "noise floor" or "amplifier hiss." This occurs when the in…
-
soundbar keeps turning itself off after about 15 minutes when i'm watching something
The Samsung HW-B650 is equipped with an energy-saving feature called Auto Power Down (APD). This system is designed to automatically shut the unit of…
-
my samsung hw-b650 soundbar just shows 'bt ready' and won't connect to my tv via hdmi arc
The soundbar is stuck in Bluetooth pairing mode. This overrides the HDMI ARC input. It happens if the BT pairing button was pressed accidentally or a…
-
the power button on my flex is really stiff and sometimes doesn't click. do i need to replace it?
Dirt, sand, or dried liquid (like soda) has gotten under the silicone membrane covering the button, gumming up the mechanical switch beneath. Clean t…
-
my flex sounds distorted and rattles at medium volume, especially with bass. did i blow the speaker?
Likely a damaged driver (speaker unit) or something loose inside the casing. The passive radiators on the sides can also rattle if debris is trapped …
-
the voice prompts on my speaker are in a different language, how do i change it back to english?
The language was changed accidentally by holding the Volume Up and Play/Pause buttons during startup, or it was paired with a device that changed the…
-
i can't get my flex to pair to my new laptop, it just doesn't show up in the bluetooth list. it works with my phone fine.
The speaker is already paired to the maximum of 8 devices and its memory is full, or your laptop's Bluetooth driver is outdated. Clear the speaker's …
-
how do i clean the fabric grille on my flex? it got splashed with mud and i'm scared to ruin it.
The powder-coated steel grille and silicone shell are water-resistant, but dirt can clog the fabric mesh behind it, affecting sound. Unplug the speak…
-
my bose flex makes a loud static pop sound when i turn it on or off, is that normal?
No, it is not normal. A loud pop or crackle from the driver during power cycles indicates a fault in the amplifier circuit or a failing capacitor. Fi…
-
the sound cuts in and out when i'm using my flex with my phone in my pocket. bluetooth range seems terrible.
Signal interference or a weak Bluetooth connection. The human body, especially near the hip, can block the 2.4 GHz signal. Other Wi-Fi or Bluetooth d…
-
my soundlink flex won't charge at all, the light just stays amber and it dies when i unplug it. i've tried different cables.
The internal battery has likely failed or the USB-C charging port is damaged. An amber light with no charge acceptance points to a hardware fault. Fi…
-
can i use my era 100 outside on my patio? i don't want to break it.
The Sonos Era 100 is not rated for outdoor or wet conditions. Its IP rating is for indoor dust and humidity only. For temporary patio use, ensure it …
-
the line-in port on my era 100 isn't working with my turntable, no sound comes through.
The line-in input is not activated in the app, or you are using an incompatible cable or source. Activate the line-in source. Open the Sonos app. Sel…
-
my era 100 sounds muffled or like the bass is missing after i moved it, did i blow a speaker?
The Trueplay tuning is disabled or tuned for the old location. The speaker adapts its sound to the room. Moving it requires a new tuning. Run Truepla…
-
how do i clean the fabric grille on my era 100 without damaging it? it's getting dusty.
Dust and debris are caught in the polyester fabric. Do not use liquids or vacuum cleaners directly on it. Use a soft, dry microfiber cloth. Gently wi…
-
i'm getting a 'unable to connect to sonos' error in the app and my era 100 has a flashing orange light.
The speaker has lost its connection to your Wi-Fi network. The flashing orange light is the network error indicator. Restart your router and modem. U…
-
the touch controls on top of my era 100 are not responding when i tap or swipe, what do i do?
The Sonos Era 100 utilizes a capacitive touch interface on the top panel, which relies on detecting the electrical properties of your skin to registe…
-
my era 100 is making a faint static or hissing noise from the tweeters when no music is playing, is this broken?
This is amplifier noise. It is often audible in a very quiet room. It is not a sign of a defect in most cases. First, enable the "Line-In Auto Play" …
-
my new sonos era 100 won't show up in the app during setup, it just keeps blinking green and i can't connect.
The speaker is in setup mode but your phone is not on the same Wi-Fi network it's trying to join. The green blinking light confirms this. Go to your …
-
voice dialog is really hard to hear, but the action scenes are way too loud.
Dynamic range compression is off. This is common with movie audio tracks. The JBL 'Night Mode' or 'Voice Enhance' features are designed to this. Pres…
-
the display on the bar 300 is way too bright at night, can i turn it off?
The JBL Bar 300 features a high-intensity LED display integrated into the front grille to provide status updates for volume, source selection, and co…
-
how do i clean the fabric grille on the front without damaging it? it's dusty.
The JBL Bar 300 features a tightly woven acoustic fabric grille designed to allow sound waves to pass through while protecting the internal drivers. …
-
hdmi arc just stopped working, tv says no signal. worked fine yesterday.
The "No Signal" error on your TV when attempting to use the JBL Bar 300 indicates a breakdown in the HDMI-CEC (Consumer Electronics Control) handshak…